Audigy 2 zs - Line-in is missing in the mixer - Help pleas

Hello,
When I switch to recording in the mixer, theres is no Line-in slider.
Have the latest driver installed.

You must select "Analog Mix" in the record slider. That's the line in.

Similar Messages

  • Time line and canvas missing from screen!

    Time line and canvas missing from screen!
    Help!
    Can not retreave them from Final Cut G.U.I
    G5   Mac OS X (10.4.9)  

    In the Browser, double click (aka open) ANY sequence. The timeline and canvas will reappear.
    If need be, create a new sequence.
    x

  • Line items are missing during transferring ITS to EBP--tricky problem

    Hi,
    We are using EBP 2.0 version.
    Some shopping carts line items are missing while transferring shopping cart data from ITS to EBP.
    This is happening randomly.we had checked all the shoppping cart related tables in EBP.
    For example in my shooping cart 4 items are there,during transferring shopping cart data from ITS to EBP all 4 items are updating for all the shopping cart related tables except account assignment table.
    In account assignment table for this particular shopping cart only 3 items are updated except first one.
    This is happening randomly for few of the shopping carts that too most of the cases first  item of  the shopping cart was not updating reqacct table(this is account assignment table for shooping cart items).
    I have debugged entire scenario,but i couldn't find the problem.
    any one could you please advise me....why this is happening?whether it is a version problem?
    Thanks,
    Ravi

    Hello Ravi,
    I guess you already checked OSS notes for this.
    Have you checked in the area of ITS ?
    When ITS sends data to EBP, only the actual screen data is sent:
    - item procurement data from basic data
    - item accounting data from accountig tab
    then this data is used to update the SC.
    If you have debugged those 2 screens, you should see what is happening.
    You say that only 3 reqacct lines are updated: does it means that you have the 4 lines previously created, or only 3 ?
    If you change one line item quantity, you should see this updating the reqacct. Same if you go directly in accounting tab.
    Finally, there are two options:
    - this is an ABAP error, so you should catch it in debug
    - this is an infrastrucute error (ITS is not sending the data), so you should get the data sent by ITS in debug mode
    Sometimes in productive environment with an heavy loaded ITS, you can loose some data. Available memory is not enough to fill in correctly ITS session containers.
    Rgds
    Christophe

  • Why are emails missing in the to: line?

    In the iOS mail app I have noticed that some mass emails are missing addressees are missing in the to: line. They are not in the cc: or bcc: line either. However I know they are there when I view the email online or on my computer. This is happening with multiple accounts too. Any suggestions?

    Am I missing something here?
    Yes, apps sold in the iTunes App Store are for iOS devices; iPhones, iPads and iPods Touch.
    Apps sold in the Mac App Store are for Macs.
    iOS apps don't run on Macs and Mac apps don't run on Macs. If a developer has developed an app for both operating systems, they are sold separately in their respective app store.

  • Tab character missing in the end of the line in file2file scenario?

    Hi,gurus:
    Our scenario is file to file,and both transport protocols are FTP.
    We are using content conversion both in sender and recevier side.
    But when we test the scenario,we found the tab character('0x09') is missing if the tab character is in the end of a line.
    Can you tell me how to keep these tab characters the same as sender file?
    Thanks in advacne.
    ps: in the content conversion,the parameter fieldSeparator and endSeparator are both '0x0A'.
    Edited by: xinjiang li on Jul 31, 2009 10:53 AM

    Hi,
    The source data is as below:
    H     0000140898     0     UCP31300     20090715     20090715     2     1     UCP31310     
    D     0000140898               00001                    
    After the record '00001',thare are some tab parameter,but after send content conversion,the payload is below:
      <?xml version="1.0" encoding="utf-8" ?>
    - <ns:MT_3PL_SAP2PF_ST02_SENDER xmlns:ns="http://www.unicharm-china.com/3PL">
    - <Recordset>
    - <Line>
      <Line>H 0000140898 0 UCP31300 20090715 20090715 2 1 UCP31310</Line>
      </Line>
    - <Line>
      <Line>D 0000140898 00001</Line>
      </Line>
      </Recordset>
      </ns:MT_3PL_SAP2PF_ST02_SENDER>
    The tab parameters are missing.
    Our sender content conversion is below:
    Line.endSeparator:'0x0a';
    Line.fieldSeparator:'0x0a';
    Line.fieldNames:Line
    Any ideas?

  • Some Line Items are missing in Standard SAP FI/CO Reports

    Dear All,
    while taking printout of SAP Standard FI/CO Reports some line items and total value are missing. E.g using TCODE FBL3N, it shows correct value after inserting selction inputs but when displaying it in spool request or taking print out it misses some line items and total value.
    Kindly help me in resolving the issue.
    Regards,
    Majid Khan

    Problem was caused by support pack SAPKB62063 and SAPKB62064.
    Apply OSS note 1100728 which was corrected in SAPKB62065.
    Giana

  • Financial Reporting Line Chart - disable #missing or #zero values

    I need some help regarding the line chart in financial reporting. I want to create a line chart for actual and forecast-values. The underlying Grid contains following values:
    actual-jan = 100
    actual-feb = 121
    actual-march = 119
    actual-april to actual-dec = #missing
    forecast-jan = 100
    forecast-feb = 121
    forecast-march = 119
    forecast-april to forecast-dec = 125
    In the line chart I get two lines, one for actual and one for forecast. Now my Problem is that the actual line has to stop with the march-value but it moves forward till december on the zero level.
    Has anyone an idea how to get the line stopped at march?
    kind regards
    kai

    Supressing or replacing zeroes does not help, the chart still drops to zero for future periods.
    I created an extra column in my grid. In this column i used a formula that says if column a (current year) is greater than zero, show column a numbers, if not, show the number from the row above. I have separate reports for debits and credits, if you are OK with showing negative numbers, just adjust the formula. What my new column does is forecasts a straight line for all future periods for the current year. It is not the exact preferred result, but it keeps the scale appropriate and with a little education almost every executive has accepted it.

  • Customer Account line items are Missing Fbl5N

    Hi experts...
    FI Guys could not able to find customer account open line items in FBL5n after generating Accounting document automatically and we have checked VKOA screen, Assignments are fine but in that accounting document the customer itself is missing in the entry where as other line items like revenues, taxes are visible. Where could have been the mistake? 
    Kindly help with the possibilities of missing configuration
    Warm Regards
    Vijay

    Hi,
    Pls check Customer GL Reconciliation account - Line Item display field.  We have to enable it to display linenitems in report.
    regards
    DSR

  • Schedule line item data missing in Purchase order form in ECC6.0

    Hi All,
    We are doing ECC6.0 upgradation project . I am trying to print Purchase order in ECC6.0 , all data is coming fine in PO except schedule line item data is missing.
    Same print program and form works fine in 4.7E but schedule line item data missing in ECC6.0.
    Print program is a copy of standard SAP program SAPFM06P and layoutset is a copy of MEDRUCK.
    If anyone knows if there is any OSS note for the standard print program or any solution please let me know.
    Thanks,
    Sonali.

    Resolved on own.

  • Shopping cart line items are missing while transfering from ITS to EBP

    Hi everyone
    I am Raghu, working on EBP (version 2.0)
    Some shopping cart line items are missing while transferring the shopping cart data from ITS to EBP.
    For example in my shooping cart 4 items are there,during transferring shopping cart data from ITS to EBP all 4 items are getting updated for all the shopping cart related tables except account assignment table.
    In account assignment table for this particular shopping cart only 3 items are updated and usually the first line item gets missed out.Hence the the system fails to create the follow on documents in R/3. 
    This is happening randomly for few of the shopping carts that too most of the cases first item of the shopping cart was not updating reqacct table(this is account assignment table for shooping cart items).
    I have debugged entire scenario,but  couldn't find the cause for this..
    Can any one  please advise me....why this is happening?
    Your immidiate ersponse will surely help me a lot.
    Thanks,
    Raghu

    Hi Yann
    Thanks for your support.
    Yes, we are using EBP2.0/CRM 2.0C & the support pack level is SAPKU20C23.
    Please advice
    Thanks
    Raghu

  • Line item attachments were missing for the documents in FB03

    Hi all ,
    i had an issue that within the transaction FB03,  attachments for line items were missing for all the documents that were posted from zprogram (artist statement) but attachments for the header items were displayed .
    Is there any clue why these attachments are missing.
    help me out of this.................!

    Check that that document key has been specified correctly. How are you storing the attachments??

  • For all entries : lines are missing in the results

    Hi all,
    I have a problem with my abap code.
    some lines are missing in the results.
    I have check the note 65554 but i use the version 6.40
    TYPES: BEGIN OF wys_bseg,
             bukrs TYPE bsad-bukrs,
             belnr TYPE bsad-belnr,
             gjahr TYPE bsad-gjahr,
             augbl TYPE bseg-augbl,
             augdt type bseg-augdt,
             hkont TYPE bseg-hkont,
             WRBTR type bseg-WRBTR,
             KOART type bseg-KOART,
             SHKZG type bseg-SHKZG,
           END OF wys_bseg.
    TYPES: begin of wys_bsas,
             bukrs TYPE bsas-bukrs,
             hkont TYPE bsas-hkont,
             augbl TYPE bsas-augbl,
             augdt type bseg-augdt,
             gjahr TYPE bsas-gjahr,
             belnr TYPE bsas-belnr,
             waers TYPE bsas-waers,
             blart TYPE bsas-blart,
             gsber TYPE bsas-gsber,
             dmbtr TYPE bsas-dmbtr,
             xblnr TYPE bsas-xblnr,
             SHKZG type bseg-SHKZG,
             zmntfact TYPE bsas-WRBTR,
           end of wys_bsas.
    DATA: wt_bseg_tmp TYPE wys_bseg OCCURS 0 WITH HEADER LINE.
    DATA : wt_bsas type wys_bsas occurs 0 WITH HEADER LINE.
        sort wt_bsas by bukrs belnr gjahr.
        DELETE ADJACENT DUPLICATES FROM wt_bsas COMPARING bukrs belnr gjahr.
    IF NOT wt_bsas[] IS INITIAL.
        select bukrs belnr gjahr augbl augdt hkont WRBTR KOART SHKZG from
    bseg into table wt_bseg_tmp
                  for all entries in wt_bsas
                  where bukrs EQ wt_bsas-bukrs
                    and belnr EQ wt_bsas-belnr
                    and gjahr EQ wt_bsas-gjahr
                    and koart EQ 'D'.
    ENDIF.

    Hi
    Yes Arun is right, INTO TABLE option delete automatically the duplicates lines, so you make sure to insert all keys in order to load all record.
    Insert the field BUZEI in the structure of internal table:
    TYPES: BEGIN OF wys_bseg,
             bukrs TYPE bsad-bukrs,
             belnr TYPE bsad-belnr,
             gjahr TYPE bsad-gjahr,
             buzei type bseg-buzei, <------ New field
             augbl TYPE bseg-augbl,
             augdt type bseg-augdt,
             hkont TYPE bseg-hkont,
             WRBTR type bseg-WRBTR,
             KOART type bseg-KOART,
             SHKZG type bseg-SHKZG,
           END OF wys_bseg.
    Max

  • I dropped my phone last night, already with a little bit of glass missing at the top. The screen has gone black with blue lines down it and i cant even see my home screen. I've tried holding down the power and home button, someone please help

    I dropped my phone last night, already with a little glass missing at the top. The screen is black with blue vertical lines, I cant even see my home screen I've tried holding the home and power button. Someome help?

    It's broken. Take it to Apple.

  • AUDIGY 2 ZS - LINE 1 OUT - JACK PROBL

    Hi all...
    Have you heard of this? Audigy 2 ZS - everything fine for 3 months. I use Logitech 2. speakers. All of a sudden, my analog Line out does not put sound to my speakers. When I change my settings in the mixer to 4. & up, Line 2 out & Line 3 out DOES send sound to my speakers - but NOT the main Line out. HOWEVER MY HEADPHONES WORK FINE IN ALL 3 JACKS!!! When I use the diagnostic tool that sends test sounds to the speakers, it's all distorted, quiet & garbled from the Line out but not the other outs. I have no device/hardware conflicts. Is there something physically wrong with the jack itself? If there is, I don't understand why headphones still work. Also, I tested my speakers on my other computer. They are fine...
    HELP... I just want my Line out to work properly again.

    What happens if you just have the external DVD recorder physically connected?

  • Audigy 2 ZS line record prob

    Hi
    i have just baught an audigy 2 ZS and i have a problem :
    i cant record line in if i dont listen to it !!!
    In the mixer, i put "mix analogic (line/cd/aux/..)" in record and put the fader to its maximum.
    And nothing come in if i dont put the line in fader on !!!
    I'd like to record line in without to listen to its sound.
    With my old soundblaster there was no problem.
    Can you help ?
    Thanx in advance
    Fred

    fred08 wrote:
    Hi
    i have just baught an audigy 2 ZS and i have a problem :
    i cant record line in if i dont listen to it !!!
    In the mixer, i put "mix analogic (line/cd/aux/..)" in record and put the fader to its maximum.
    And nothing come in if i dont put the line in fader on !!!
    I'd like to record line in without to listen to its sound.
    With my old soundblaster there was no problem.
    Can you help ?
    Thanx in advance
    Fred
    Well, if you disable the source you're recording from (Line-In), how on earth could it be possible to record from it then?
    There is also a setting called "Record Without Monitoring" behind the tiny '+' sign. Have you tried if disabling Monitoring has any effect?
    jutapa

Maybe you are looking for