Audigy 2 zs Line in probl

When i am djing, i would like to use my inspire 5800 5. speakers as well as my normal ones, the problem is, when i plug the phono leads (goes to 3.5 mm jack) into the line in, the bass and treble comes through the sub and satellite speakers rather than bass--->sub and mid/treble--->satellite speakers! Any help would be much appreciated!
Thx
Chris

vazel,
In the mixer, choose Analog Mix or WhatUHear as the REC source. Unmute LineIn as a playback source.

Similar Messages

  • Audigy 4 Line-in probl

    I have tried using the the line-in feautures of the new Audigy 4, however apart from the microphone I can't get the other line-ins (2 and 3) to work. Mainly trying to hook up a guitar. I've tried straight from the guitar to the external box, then from the amp (clean setting) and still nothing. At best I get a static like sound. One of my electric guitars gives out a recognizable sound, although it's garbled at best.
    Greatly frustrated at the fact that Creative persists with giving out no manual whatsoever and that the online version is joke. Any help in this matter is greatly appreciated.

    i have the same problem, i can't use line in of the hub (neither the headphone on the hub) while all other stuff seems to work as it should (volume and remote control at least)
    Did u solved the problem?

  • AUDIGY 2 ZS - LINE 1 OUT - JACK PROBL

    Hi all...
    Have you heard of this? Audigy 2 ZS - everything fine for 3 months. I use Logitech 2. speakers. All of a sudden, my analog Line out does not put sound to my speakers. When I change my settings in the mixer to 4. & up, Line 2 out & Line 3 out DOES send sound to my speakers - but NOT the main Line out. HOWEVER MY HEADPHONES WORK FINE IN ALL 3 JACKS!!! When I use the diagnostic tool that sends test sounds to the speakers, it's all distorted, quiet & garbled from the Line out but not the other outs. I have no device/hardware conflicts. Is there something physically wrong with the jack itself? If there is, I don't understand why headphones still work. Also, I tested my speakers on my other computer. They are fine...
    HELP... I just want my Line out to work properly again.

    What happens if you just have the external DVD recorder physically connected?

  • Sound Blaster Audigy 4 pro optical In probl

    Hello, I recently purchase a audigy 4 pro, My current setup is 3 wires(green, black, orange) going from my Logitech X-530 5. speakers to the audigy 4 sound card, from there, the AD_Link and Ad_Link2(firewire) going to the Audigy's External I/O, now when i Plug in any toslink cable from the *Optical In* port to my game system(xbox, xbox 360, dvd player, ps2), there is no sound. but when i use the standard A/v cable(red/white) and plug it into the back of the external I/O(Line IN 3), the sound works. Everything else also seems to be working fine. any idea what could be the problem? also note, that i'm kinda new at this, so sorry if i dont fully understand your reply.

    What seems to be a problem is the I/O box is powered on, but not connecting to the card. The power light is on, but the volume knob isn't doing anything and the extra inputs aren't recognized. I didn't touch any of the cables, and they're all secure so I have no idea what's going on.

  • Audigy 2 Platinum eX Installation Probl

    I'm having mind-bending problems installing my new audigy 2 Patinum eX soundcard.
    Current PC config is:
    Dell Dimension 8250
    Pentium 4 2.66GHz,
    52Mb RAM
    WINDOWS XP SP2
    I previously had a Soundblaster Li've! value (Dell OEM) card.
    I had all sorts of problems with nothing but random clicking etc. on first installation. Since then I've been through the manual uninstall on the knowledgebase (Solution ID 72) and reinstalled from the CD and applied the latest driver updates via the software autoupdate on this site. It (mysteriously) suggested that soundfonts were a critical part of the installation so I let it go ahead. The card seemed to work OKish after that but with more clicks (but MUCH better than JUST the clicks before). This was late last night and I shut down and went to bed - upon getting up this AM I started up the PC and no I have complete silence EXCEPT that the 'Intro to Windows' sound that you get as it opens up worked (!?!?!?). Since then nothing, no sound from Winamp, no sound from games. Infuriating and why would a reboot cause the thing to stop working?
    I should add that it is silent from both the line out socket on the PCI card AND the headphone socket on the external unit.
    Any tips of what to try next gratefully received, I'm pulling my hair out here. Pretty soon the old Li've card will be going back in and this will be going back to the shop while I figure out which Non-Creative card to go for.
    Cheers,
    Greg.

    I have a simular problem. On the first boot of the day my system will freeze, could be 2sec in, or 2 hours. Once i restart it runds like a dream. Now confirmed it is soundcard drivers by process of elimination. What drivers did you install to get it working without the freezing?

  • Audigy Platinum Ex Line In Quest

    I recently re-installed my Soundblaster Audigy Platinum Ex card on a new hard dri've - it's worked properly in the past. I have run the installation cd and gone to the Soundblaster website for all the latest drivers. On my external module I am unable to get audio to input through the line-ins to (Aux in 2, Mic/Aux 2, and 394). No monitor, no capture (though the headphone jack works properly, and the standard soundcard works properly). I've checked my connections. I'm very experienced with audio software and have been unable to figure this out.
    The one thing that might fix this that I am unable to find - is there a control panel setting somewhere that verifys that input should be coming through the ex Module? Any advice would be greatly appreciated....

    Hi there " bucktoothmummy". I just recieved this same problem today. Tryed to solve it via software updates and messing with IRQ stuff. None of that helped. I desperately tryed every line-in port there is and suddenly I heard loud static coming from the speakers.
    What I found out was that the cable (the wide one) on the backpanel has been someway corrupted, and needed only a few twitches (pull it up and down). So the problem in my case was purely the low quality of the jack OR the cable. The ports them selves are just fine.
    Email me if you wish to ask some more, hope this helps

  • Audigy 4 Pro - Line In 3 Prob

    I have been having a huge issue with getting my Line In 3 to play audio from my Television and/or my DVD player. I sent my first Audigy 4 Pro back because I could not get the Line In 3 to work. Now I am having the same problem on a completely different sound card. My DVD player's audio out work just fine when they are hooked into the TVs in, but when I hook the DVD outs to the external hub's Line In 3 nothing comes out of my computer speakers. I am so frustrated with this sound card. Any help would be grateful.

    - are all other features working well in Ext. Hub (powerful enough PSU or is the additional power for the A4 PCI card taken from shared floppy power cable))?
    I've only ever used the Line-In and the Headphone jack on the front, they work fine. There is a red light coming out of the Optical out on the front (expected). The card does have a 4 pin connection and it is plugged in.
    - have you tried w/o other peripherals connected into Hub (just one through line-in 3)?
    Yes, same results (but ... see below).
    - have you installed latest drivers/software updates for your card?
    Where can I find the latest drivers at? I hate to download and install the wrong ones.
    - have you tried by uninstalling the CT software suite (least Surround Mixer) and control I/Os through Windows Play/Recording Controls (start run... mmsys32 and mmsys32 /r)
    I have not tried to uninstall anything and I type mmsys32 in the command prompt and get an error that it can not find the program.
    Update: I turned my computer off last night and turned it back on this morning, plug my RCA cables into my external hub and get a steady low frequency "buzz".

  • Audigy 2 ZS line record prob

    Hi
    i have just baught an audigy 2 ZS and i have a problem :
    i cant record line in if i dont listen to it !!!
    In the mixer, i put "mix analogic (line/cd/aux/..)" in record and put the fader to its maximum.
    And nothing come in if i dont put the line in fader on !!!
    I'd like to record line in without to listen to its sound.
    With my old soundblaster there was no problem.
    Can you help ?
    Thanx in advance
    Fred

    fred08 wrote:
    Hi
    i have just baught an audigy 2 ZS and i have a problem :
    i cant record line in if i dont listen to it !!!
    In the mixer, i put "mix analogic (line/cd/aux/..)" in record and put the fader to its maximum.
    And nothing come in if i dont put the line in fader on !!!
    I'd like to record line in without to listen to its sound.
    With my old soundblaster there was no problem.
    Can you help ?
    Thanx in advance
    Fred
    Well, if you disable the source you're recording from (Line-In), how on earth could it be possible to record from it then?
    There is also a setting called "Record Without Monitoring" behind the tiny '+' sign. Have you tried if disabling Monitoring has any effect?
    jutapa

  • Audigy 2 ZS Line-In 2/Mic 2 doesn't capt

    Hello,I have an Audigy 2 ZS that I use primarily for recording my Guitar.
    My problem is that the Line-In 2/Mic 2 doesn't capture the imput coming from my guitar. It was working fine for about a year. I would plug my guitar directly into the line-In 2/Mic 2, volume about half way and any
    audio program would hear it. Since the problem began I have checked many settings. I don't see it being muted in the control panel's sound settings as well as the creative surround mixer shows it as being un-muted as well. Windows is set to use the Audigy as the recording source. In the Creative sound mixer I have tried setting it to analog as others have suggested on this board. Doesn't work as Analog or as Line-In 2/Mic 2. When inside of my recording program (Sony's Acid)?I have a graphical level so that I can make sure that my recordings never "peak". If i turn the volume dial on the sound card all the way up that level begins to
    bounce slightly and I can hear a hum which I assume means that I have it too loud. Turning the volume down makes that go away. This leads me to believe that there could be something wrong with the actual
    hardware. The software can see (and I can hear) that i'm adjusting the volume so i don't think it's a software muting issue. what can I do? are there any tests that might help me to determine the source of my problem? perhaps new drivers? I have tried other guitars and cords and they work fine when plugged into a normal amplifier. I have also tried connecting my bass guitar though my Sans Amp Bass Driver DI and get the same results. PC Specsell, Windows XP
    Pentium 4 3ghz
    52 mb of ram?Any help would be fantastic. I'm contemplating calling Creative tech support. Has anyone else experienced this problem in the past?

    I've tried setting the Creative Surround Mixer Rec to Line-In 2 /Mic 2?and Analog Mix Line as well as the other options listed. None seem to make much of a difference. When I set the Audio Device Type in Acid to "Creative ASIO" I get an error saying?" The device Creative ASIO does not support the current sample rate or bit depth". I get the same error when trying just "SB Audigy 2 ZS ASIO [DF00]. I tried lowering the Project's Sample rate (Hz) and the Bit depth but every combination seems to give me error as soon as I apply them. Maybe there's a certain combination of Sample rate and Bit depth that would work best?I've also tried setting it to Microsoft Sound Mapper, Direct Sound Surround Mapper/Primary Sound Capture Driver and the?Windows Classic Wave Driver. None of the produce the errors I mentioned above... but they don't work either. I have the latest windows update.

  • Audigy 2 ZS: Line In independa

    I have noticed in the transition from my Li've! Value to my Audigy 2 ZS, the Line In control in the Recording mixer is gone. I know there is the Analog Mix one, but it doesn't appear to be independent from the Line In control in the Playback mixer. Is there any way to fix this, so that the Recording Line In is independent from the Playback Line In?
    Thanks

    bumppity bump
    I have tried the email support, but 3 emails later, I don't have a decent reply. I will send another email, but I was hoping someone here would have any ideas.
    TIA

  • Audigy 2 zs line in p

    The Audigy 2 ZS has a line in port. I used an RCA to mini-jack cable to connect the audio out on my TV to that port. But I'm not hearing anything through my PC headphones when watching TV? Am I supposed to activate it somehow?

    vazel,
    In the mixer, choose Analog Mix or WhatUHear as the REC source. Unmute LineIn as a playback source.

  • My audigy 2 nx line-in doesn't work. help m

    My external soundcard was working correctly few days ago. But after a virus attack, I had to reinstall windows XP, the audigy 2 NX and CUBASE LE. I can hear the microphone input but not the line-in input with a keyboard. WHYYYYYYYYY ?? It was OK before that.
    This is the same problem with the freeware software kristal so I think it's coming from the soundcard or its driver.
    (second question : do you understand my french-english ?)

    Rob,
    Well if it isn't working on either input then it is most likely a software problem. Is this a platinum version of the Audigy 2? If so you may want to check your mixer and make sure that line2/mic2 is also unmuted to test from it. If this isn't a Platinum dri've, was this card installed in a prebuilt system? Then the front connecter may override the back one. I would launch the Window's mixer, go to options and make sure that every control has a checkmark in it. Then go down the line and make sure nothing is muted. This is mainly a double check step.
    I am not sure what else could cause the line in not to work, you might want to consider contacting support directly in this case.
    Jeremy

  • Audigy 2 Platinum Front Panel Probl

    Hello everyone. Thank you in advance for any help.
    My problem is two-fold, let me begin with the first issues.
    Critical Issue One: On my Audigy 2 Platinum neither the headphone jack nor the Line 2 in/Mic 2 in jacks appear to be at all functional. I can get no sound to go in or come out using them. Additionally, I don't see a volume slider to control either of them in the surround mixer. Is it possible somehow that the entire front panel is disabled? I looked inside my computer and it appears to be connected firmly (the AD_EXT cable is the only one connecting my sound card to anything internally). As a side note I have already tried doing a full, clean reinstall of the drivers, to no avail.
    Issue Two: I can no longer auto update my drivers using Creative's site. I believe this is somehow related to IE7, it always functioned perfectly with IE6. When I try to update now the message I get is: "Some components are corrupted." I did a search in the knowledge base and followed the instructions to fix this problem (Deleting the Acti've X controls) but this does not resolve the issue (I also noticed by searching the forums that people with similar problems never found a resolution beyond "doing a manual driver install"). I believe that the acti've x controls that I am downloading get corrupted each time. Is it possible that someone could send me, fully functional non corrupted creative acti've x controls that I could install? Or is this simply an incompatibility between the creative site and IE7?

    Hello everyone. Thank you in advance for any help.
    My problem is two-fold, let me begin with the first issues.
    Critical Issue One: On my Audigy 2 Platinum neither the headphone jack nor the Line 2 in/Mic 2 in jacks appear to be at all functional. I can get no sound to go in or come out using them. Additionally, I don't see a volume slider to control either of them in the surround mixer. Is it possible somehow that the entire front panel is disabled? I looked inside my computer and it appears to be connected firmly (the AD_EXT cable is the only one connecting my sound card to anything internally). As a side note I have already tried doing a full, clean reinstall of the drivers, to no avail.
    Issue Two: I can no longer auto update my drivers using Creative's site. I believe this is somehow related to IE7, it always functioned perfectly with IE6. When I try to update now the message I get is: "Some components are corrupted." I did a search in the knowledge base and followed the instructions to fix this problem (Deleting the Acti've X controls) but this does not resolve the issue (I also noticed by searching the forums that people with similar problems never found a resolution beyond "doing a manual driver install"). I believe that the acti've x controls that I am downloading get corrupted each time. Is it possible that someone could send me, fully functional non corrupted creative acti've x controls that I could install? Or is this simply an incompatibility between the creative site and IE7?

  • Audigy 4 non-pro, multimedia probl

    Hi there,
    Got the Audigy 4 non-pro card, and I'm sticking with it for a long time... but it does have a few problems, I was hoping some of you may have the same problems and could help me. The first one may not be a problem with the card itself.
    The thing is, I have a certain DVD-title that has Linear PCM Stereo and DTS-Digital 5. Surround soundtracks. The stereo works fine (let's say in Windows Media Player), but when I switch to DTS (hoping for a surround experience), there is no sound! I am able to have surround sound with most DVDs, although it's usually Dolby Surround. Do I need special software to play DTS soundtracks? I know that PowerDVD (or whatever its' name) has to be upgraded for DTS, but the Windows Media PLayer does have a DTS logo thing, when I play it, but there is no sound!
    The other problem seems to be more serious.
    When I work with MIDI, or play MIDI files, there's a strange lock-up of the system, although on an irregular basis. Sometimes, suddenly, instantaneously, everything stops, and there is a sustained and quiet MIDI sounds, as though the last notes are held, and the system is in a state of complete lock-up. Does anyone have a problem with taht? Or a solution, even better!
    Cheers.

    I think you should try some modded driver. It will provide better sound. Try these following links and find out which driver will give your favorite sound. But remember to back up your system (system restore is a good choice before doing so)
    YouP PAX Fi 3.33 For X-FI:
    http://youp-pax.com/youp/YouP-PAX-Fiv3.33-XFi.rar
    YouP PAX A4 3.33 For Audigy X:
    http://youp-pax.com/youp/YouP-PAX-A4v3.33.rar
    and many other:
    PAX-TH 76.92MB.
    Soft for PAX VI v? PAX ZS
    http://file2.mydrivers.com/sound/PAX-TH.ZIP
    http://file.mydrivers.com/sound/PAX-TH.ZIP
    http://file3.mydrivers.com/files/sound/PAX-TH.ZIP
    http://file4.mydrivers.com/files/sound/PAX-TH.ZIP
    http://crc.mydrivers.com/sound/PAX-TH.ZIP
    http://sc.mydrivers.com/sound/PAX-TH.ZIP
    Links for Pax VI Ultra (Li've! series on WinXP SP2) 62.4MB
    http://file2.mydrivers.com/sound/YouP-PAX-VI-Ultra.exe
    http://file.mydrivers.com/sound/YouP-PAX-VI-Ultra.exe
    http://file3.mydrivers.com/files/sound/YouP-PAX-VI-Ultra.exe
    http://file4.mydrivers.com/files/sound/YouP-PAX-VI-Ultra.exe
    PAX VI .68 7.7MB
    http://file2.mydrivers.com/sound/YouP-PAX-VIv.68.rar
    http://file.mydrivers.com/sound/YouP-PAX-VIv.68.rar
    http://file3.mydrivers.com/files/sound/YouP-PAX-VIv.68.rar
    Zhengzhou downloads 4
    http://file4.mydrivers.com/files/sound/YouP-PAX-VIv.68.rar
    http://crc.mydrivers.com/sound/YouP-PAX-VIv.68.rar
    http://sc.mydrivers.com/sound/YouP-PAX-VIv.68.rar
    Links for ZS2.66( d?nh cho Audigy, Audigy2(ZS))
    http://file2.mydrivers.com/sound/YouP-PAX-ZSv2.66a.exe
    http://file.mydrivers.com/sound/YouP-PAX-ZSv2.66a.exe
    http://file3.mydrivers.com/files/sound/YouP-PAX-ZSv2.66a.exe
    Soft for cho Audigy2 (262.73M)
    http://file2.mydrivers.com/sound/A2-ZS-PAX.exe
    Http://file.mydrivers.com/sound/A2-ZS-PAX.exe
    Http://file3.mydrivers.com/files/sound/A2-ZS-PAX.exe
    Http://file4.mydrivers.com/files/sound/A2-ZS-PAX.exe
    Http://crc.mydrivers.com/sound/A2-ZS-PAX.exe
    Http://sc.mydrivers.com/sound/A2-ZS-PAX.exe

  • Audigy 4 Pro Optical In Probl

    Hey everyone,
    I've had an Audigy 4 Pro for about a year now and it's an amazing piece of hardware, but I seem to be having some kind of problem.
    I recently had an HD cable box put in my room and I want to connect the optical out port on the cable box to the optical in port on the Audigy 4 I/O box. I made the connections and the optical cable is lit and sending a signal, but I'm not getting any sound out of my speakers. I went into the volume mixer and turned on "S/PDIF-In"?and still nothing. Are there any other settings I need to check? I checked some of the other inputs on the I/O box and they seem to work so I don't understand why this one won't. Thanks in advance for any help you can give me.

    What seems to be a problem is the I/O box is powered on, but not connecting to the card. The power light is on, but the volume knob isn't doing anything and the extra inputs aren't recognized. I didn't touch any of the cables, and they're all secure so I have no idea what's going on.

Maybe you are looking for