Audigy 2 ZS...Low profile bracket?

Have upgraded my old PC to a small factor Fujitsu Siemens and wanted to put my sound card in as the on-board isn't really that great. Is there a low profile bracket available for the ZS?
Thanks,
Phil

& I do not think you would be pleased with a low profile bracket for the Audigy 2ZS. Here is a picture of the low profile bracket on the X-Fi Forte....and I do not want you to think you would compromise with something like this:
<img border="0" width="2" src="http://i44.tinypic.com/wb70ad.jpg" height="386" alt="low profile">

Similar Messages

Where can I get a low-profile bracket for p212

Hi,
I have the adapter and a full height bracket but where can I get the low profile bracket?

Awesome. I sent you a PM perhaps we can swap. I actually need 2 half height brackets, but I'll settle with what I can get.

Low Profile Bracket for NX8500GT-MTD256EH

Hey guys, I have one of these:
http://global.msi.com.tw/index.php?func=proddesc&prod_no=1231&maincat_no=130&cat2_no=136
And I need to buy the low-profile vga bracket so it'll fit in my slim-PC. I've tried contacting them via email, contact submission, calling several times, but never gotten a response. Any easier way to get one of these? Maybe a vendor? Thanks!

If you would have done a search on Google you would have seen that the #1 complaint is that it doesn't come with a Low Profile Bracket... example:
http://www.newegg.com/Product/ProductReview.aspx?Item=N82E16814127301
A site that sells the card WITH the low profile bracket...
http://www.aria.co.uk/Products/Components/Graphics+Cards/PCI-E/nVIDIA+GeForce+8+Series/MSI+GeForce+8500GT+256MB+HDMI+Low-Profile+Silent+PCI-E+?productId=30971
A site that says you can buy the bracket from MSI (but the # doesn't work anymore...)
http://www.pricespider.com/product-reviews/997462/MSI-NX8500GT-MTD256EH-GeForce-8500GT-HDMI-HDCP-Silent-Heatsink-Video-Card-Review-NX8500GT-MTD256EH.html
I knew of all these things already, but was hoping that the Forum had a good way of contacting MSI (because all the methods I've tried in Post #1 didn't work)

8500GT Low Profile Bracket?

I just purchased an 8500GT with HDMI out for my HTPC. I have a slim case and need a low profile bracket fot my card. I read on newegg that someone else who bought the same card ordered the bracket from MSI. It only cost him shipping. Does anyone know where I can get this bracket?

Call MSI and and ask them about it.

TV @nywhere Satellite II PCI Card - low profile bracket?

Hi,
I have a low profile Antec Minuet case which only takes low profile bracket cards.
Can I make the TV@nywhere PCI Satellite II card fit in my case? It looks small enough....
Does it come with dual size brackets or will I be able to adjust the bracket to fit?
Please help - I really need to get Satellite into my case but cant find any Low Profile cards...
Also, can someone confirm if TV@nywhere PCI Satellite - the original version - allow me to receive HD satellite channels? Not too fussed about recording - just want to view HD Satellite? This card is easier to obtain in the UK - the new II version is harder to get hold of.
Thanks!

Hi Bas,
thanks for your answer.
DVB-dream is a software to view tv on your PC. I want to watch blueray, radio, tv, watch pictures,... -> HTPC.
For this MCE is a nice standard software. I thing the problem is not MCE but MSI! After the message "... no signal.." the MSI software have to be start under admin rights to work. For me this is a hint to a bug in the msi driver.
Darius

Need a low profile bracket for XtremeGamer card

/?I've recently purchased an SB XtremeGamer sound card which unfortunately came with a regular rear bracket. I need to get the low profile one for my current build. Does anybody know where I can locate one for a decent price? Does Creative carry it any more?
This is the bracket that I need. Thanks.

Hi,
Sorry, I don't think the profile bracket is available through Creative. These brackets are usually included with certain models, but not sold separately.

Dell Optiplex GX270 (Low Profile Card AND Bracket)

Hi,
I have done a search for this but couldn't find a definiti've answer. As the title suggests I have a Dell Optiplex GX270 which is a SFF (Small Form Factor) PC. Standard PCI cards?will not fit into this machine.
Can anyone tell me whether Creative offer a sound card that is not only low profile but also comes with a low profile bracket in the UK.
Many Thanks
Jamie

Hi JCarnon,
You might want to read up about the X-Fi Xtreme Audio & X-Fi Xtreme Gamer, please contact the online store to find out if the bracket is available.

Audigy Value and low profi

Hi,
I was looking for an sound card which I can use in a case with low profile slots. So I found the Creative Audigy Value. I think the height of it is ok but it seems that there is no low profile bracket for it. Can I use this sound card in such cases nevertheless?

yes i have just bought the sound blaster audigy SE, not sure whether thats slim edition or slow or something but anyway its a half height card. I've been using the card unbracked for about a week with no trouble. If you are moving the PC about a lot it might flop from side to side about a bit but should be fine.

X-Fi Xtreme Audio low profile mounting bracket anyo

Hi,
I have just bought one of these cards to install in my Dell Dimension C52. I got it because it was low-profile as my case is narrow. The card will fit fine, but unfortunately, the sound card mounting bracket is too long and prevents me from closing the case. From the blank I took out of the pc case, the mounting bracket I need is 80mm long. Do Creative make a low profile sound card mounting bracket?Thanks in advance.

@Re: X-Fi Xtreme Audio - Volume goes low, static, then comes backu Hi
Did anyone solve this - I have started getting exactly the same problem today. There is a fairly loud pop and then the sound that normally should be coming form the machine (game or music) is very quiet and distorted. After a short while (a few minutes), it pops again and starts working again. I built this machine a few months ago and this is the first time that I have had this issue. The specs are as follows:
XFX ATI Radeon HD 5870
Asus P6X58D Premium Intel X58 Motherboard,
Intel Core i7 920 D0 Stepping 2.66Ghz (Nehalem)
Corsair XMS3 6GB (3x2GB) DDR3 PC3-2800C9 (600MHz) Tri-Channel
Hitachi Deskstar 7K2000 2TB HD
Intel X25-M Mainstream 80GB SSHD
X-Fi Fatalty FPS
The X-Fi card is from my old machine and it worked perfectly in that one.
Many thanks,
Dave

NI ExpressCard-8360 - Adaptor card to low-profile PCIe slot

Hello,
we share PXI chassis in our office between desktop PCs by using of NI Express Card 8360 + Delock PCI Express card to Express Card 34 mm
+
BUT our Dell Desktop PCs have low-profile PCI Express slots. So Delock card doesn't fit properly and its front plate has to be twisted to be able to plug in.
Also it's impossible to screw it so loosing of connection and crashes are noted sometimes.
So my question is: Is there some LOW-PROFILE Adapter in the market?
I mean upper of these two...

Oh and while I was at NewEgg I intend to try
StarTech ECBRACKET2 Stabilizer Adapter
http://www.newegg.com/Product/Product.aspx?Item=N82E16839158051
Its a bit of plastic that clips on the bracket to stop the express card being wobbled / bumped in the adaptor. (I have lost the connection in my laptop before because I bumped the cable.)
Nick

Sound stopped after installing hp dc7900 low profile video card

i installed a low profile video card on hpcompaq dc7100. since then the sound stopped working. anyway to uninstall the sound portion of the video card and use the computer's original sound card? or any other suggestion to have the computer see the new sound portion of the new video card? what can i do to make the sound come back lol
thanks
This question was solved.
View Solution.

Hi:
You go into the BIOS, select the Advanced Options menu.
Go to the device configuration menu and there will be an onboard audio setting.
It will be set to Disabled. Change the setting to Enabled. Save the setting there by hitting the F10 key, and again when you exit the BIOS.
After you reboot, you will have the onboard audio back.

Low profile counter/timer board

Does NI (or anyone else) make a low-profile counter/timer board? Perhaps with specs similar to 6602? If not, are there some other options that I could look into (I think the sample rates may be too high to use USB)?
Solved!
Go to Solution.

Hi greatgrandpadog,
Unfortunately, NI does not have any counter/timer solutions that are low-profile on PCI.
Our cDAQ-9171 single slot USB chassis has four 32-bit counter/timers that can use an onboard 80 MHz clock (detailed specifications). For external signals, you would need to use one of our digital i/o module which have various specifications. You can find a list of them here. This will be the best way to go for a compact USB counter/timer. If you have additional i/o, take a look at our CompactDAQ Advisor, where you can use a 4- or 8-slot chassis to expand your i/o in a single system. For more sophisticated control, CompactRIO offers a similar platform but with FPGA and Real-Time for greater customization and reliability. There is an online advisor for that as well, here.
Regards,
Chris E.
Applications Engineer
National Instruments
http://www.ni.com/support

Low profile HD 5670

I see the MSI R5670-PD512 card is low profile, but it only has 512MB
Is there a 1GB version of the low profile one?

see here: http://eu.msi.com/service/search/?kw=R5670&type=product

Low profile security lock

Just wondering if anyone has found a low profile security lock for the MBP that doesn't interfere with the right USB port?
Thanks
Abby

Does this article contain anything useful?
(15228)

Low-Profile SPDIF

Hi.
I'm looking for a low-profile soundcard that has coaxial SPDIF inputs AND outputs. Can anyone recommend such a card? The specs on the product pages are very unclear as to exactly what connectors the cards have. I have no interest in any other features of the card, its simply to get SPDIF into and out of the PC. It needs to be a half-height card and backplate as thats all that will fit into the PC.
If necessary there is room to put in a second backplate with?the SPDIF sockets, but it would be preferable for the SPDIF sockets to be on the soundcard's backplate.
The PCs are running Windows XP
Many thanks, David.

Vista allows for upto 7. configurations. But it doesn't support 6. as this appears not to be an industry wide standard.
In Windows XP it might have been possible for manufacturers to do whatever they wanted to in regards to speaker support, because they were allowed to completely handle audio (either in software emulation?or real?hardware).
Under Vista Microsoft only allows software engines and these only in specific points of the pipeline, which severely limits the abilities of vendors to differentiate. For example Sample Rate Conversion is entirely done by the OS, so the advantages of X-Fi's SSRC or the disadvantages of the EMU0Kx line in regards to the matter are extincted.

Audigy 2 ZS...Low profile bracket?

Similar Messages

Maybe you are looking for