Audigy 2 ZS, Mediasource 5, DTS wav and the Logitech Z-5500 speak

I'm trying to play a DTS Wav file from audio cd in mediasource 5.0?and get the following results:- mediasource: with spdiff passthrough on in the soundcard settings?and the Logitech Z-5500 speakset set to coax I get DTS digital surround but mediasource plays the music at doublespeed (higher pitch)- mediasource: With the internal decoder activated and the speakerset set to analog 6 channel direct I get a very strange audio stream: the sound that normally would be coming from the centerspeaker (main vocals), comes from the rear left speaker and all the other speakers only give an echo of this sound.- Playing the DTS wav file in powerdvd 6 deluxe (soundcard and powerdvd software set to Spdiff)?gives me?crackled / poppled sound but not the static noise?other users commonly get.- playing the DTS wav?file in powerdvd 6 deluxe (soundcard set to internal decoder and powerdvd software set to 5. speakers) gives me the?famous?static noise.- other players like media player classic also give me nothing more than static noise. I have the latest audigy 2 drivers and mediasource software installed.Any suggestions are much appreciatedMessage Edited by markkleijweg on 05-0-200702:58 PM

Take a look at this thread, it might be of some help:?http://forums.creative.com/creativel...ssage.id=89257??OTOH if you are on Vista, all bets are off.Message Edited by HSE on 05-0-200705:8 PM

Similar Messages

Connecting sb2 audigy zs (not platinum or pro) digital output to logitech z-5500 speak

anyone ever try to use the digital out port on the sound card to connect to a set of speakers that had a coxial input? i have a theory on buying a digital cable and go to radio shack and buy a mono plug.. but will that work? is that compatible?
thanks

i currently have the 5 year old FPS 2000 cambridge soundworks digital speakers. i currently use the digital out on my augidy 2 zs, with the digital in adapter to connect to the speakers. (http://us.creative.com/products/prod...0&product=0375)
i am planning on purchasing the logitech z-5500 and have been reading on these boards that i can get the (http://www.radioshack.com/product.as...5Fid=42%2D2444) digital out minijack to digital out rca jack that the logitech speakers accept.
you wrote about the limitations of using this digital connection - would the limitations be exactly the same that i currently have (using the digital out to the fps 2000) or would this be a more limiting configuration?

I have tried several published methods for using umlauts but none have worked. I have used the IPad 2 with the screen keyboard and the Logitech keyboard, all to no avail.

I have tried several methods for using umlauts but none have worked. These include the screen keyboard and a Logitech keyboard. I tried pressing and holding an o for several seconds then (while holding the o down, pressed the o umlaut in the pop-up screen with no results.

Instead of using a second finger to press the umlaut while holding down the o key try this:
Tap and hold on the o until you see the alternate choices then slide your finger up to the umlaut.

X11, xinput and the Logitech LX710 Cordless Desktop Laser Mouse

Hello all,
First, lets be clear, the problem I'll describe in the lines below drives me nuts. This forum is my last change before:
1 - Throwing myself through the window
2 - Spend 50€ for a new mouse
Before taking one of those solutions here is my problem:
I bought a Logitech LX710 kit with keyboard and a mouse connected to a single usb bundle. The keyboard works fine but using the mouse can transform you insane. The single click works 1 time on 3, the double click is random, the single click is sometime taken as a press and hold. At the beginning I thought it was an hardware problem but the kit works fine on windows .
So here is how I configure my kit:
¤ Here is what the /proc/bus/input/devices lists
[romain@arch ~]$ more /proc/bus/input/devices
I: Bus=0017 Vendor=0001 Product=0001 Version=0100
N: Name="Macintosh mouse button emulation"
P: Phys=
S: Sysfs=/devices/virtual/input/input0
U: Uniq=
H: Handlers=mouse0 event0
B: EV=7
B: KEY=70000 0 0 0 0
B: REL=3
I: Bus=0019 Vendor=0000 Product=0001 Version=0000
N: Name="Power Button"
P: Phys=LNXPWRBN/button/input0
S: Sysfs=/devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
U: Uniq=
H: Handlers=kbd event1
B: EV=3
B: KEY=10000000000000 0
I: Bus=0019 Vendor=0000 Product=0001 Version=0000
N: Name="Power Button"
P: Phys=PNP0C0C/button/input0
S: Sysfs=/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2
U: Uniq=
H: Handlers=kbd event2
B: EV=3
B: KEY=10000000000000 0
I: Bus=0003 Vendor=0471 Product=0331 Version=0100
N: Name="Philips SPC 1300NC Webcam"
P: Phys=usb-0000:00:1d.7-3/button
S: Sysfs=/devices/pci0000:00/0000:00:1d.7/usb2/2-3/2-3:1.0/input/input3
U: Uniq=
H: Handlers=kbd event3
B: EV=3
B: KEY=100000 0 0 0
I: Bus=0003 Vendor=046d Product=c517 Version=0110
N: Name="Logitech USB Receiver"
P: Phys=usb-0000:00:1d.0-2/input0
S: Sysfs=/devices/pci0000:00/0000:00:1d.0/usb5/5-2/5-2:1.0/input/input4
U: Uniq=
H: Handlers=kbd event4
B: EV=120013
B: KEY=1000000000007 ff800000000007ff febeffdfffefffff fffffffffffffffe
B: MSC=10
B: LED=1f
I: Bus=0003 Vendor=046d Product=c517 Version=0110
N: Name="Logitech USB Receiver"
P: Phys=usb-0000:00:1d.0-2/input1
S: Sysfs=/devices/pci0000:00/0000:00:1d.0/usb5/5-2/5-2:1.1/input/input5
U: Uniq=
H: Handlers=kbd mouse1 event5
B: EV=1f
B: KEY=837fff042c332f bf08444400000000 ff0001 1f848a37cc00 667bfadd71dfed 9e000000000000 0
B: REL=1c3
B: ABS=100000000
B: MSC=10
¤ here is how I configure X11:
Section "ServerLayout"
Identifier "Layout0"
Screen 0 "Screen0" 0 0
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "Mouse0" "CorePointer"
InputDevice "stylus" "SendCoreEvents"
InputDevice "eraser" "SendCoreEvents"
InputDevice "pad" "SendCoreEvents"
EndSection
Section "Files"
FontPath "/usr/share/fonts/default/Type1"
ModulePath "/usr/lib/xorg/modules/extensions/nvidia"
ModulePath "/usr/lib/xorg/modules/drivers"
ModulePath "/usr/lib/xorg/modules"
EndSection
Section "Module"
Load "dbe"
Load "extmod"
Load "type1"
Load "freetype"
Load "glx"
EndSection
Section "ServerFlags"
#Option "Xinerama" "0"
Option "AIGLX" "on"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
#Driver "evdev"
# Change the value of the "Dev Phys" option to the physical
# address of the corresponding keyboard, found in the file
# /proc/bus/input/devices .
Option "Protocol" "kbd"
#Option "Dev Name" "Logitech USB Receiver"
Option "Dev Phys" "usb-*/input0"
Option "Device" "/dev/input/event4"
# Configure your keyboard as usual
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "fr"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "evdev"
#Option "Dev Name" "Logitech USB Receiver"
Option "Dev Phys" "usb-*/input1"
Option "Device" "/dev/input/event5"
Option "XExtentionPointer"
Option "SendCoreEvents" "true"
EndSection
Section "InputDevice"
Identifier "eraser"
Driver "wacom"
Option "Device" "/dev/input/wacom"
Option "Type" "eraser"
Option "Mode" "Absolute"
Option "USB" "On"
Option "Tilt" "On"
Option "Thresold" "10"
EndSection
Section "InputDevice"
Identifier "cursor"
Driver "wacom"
Option "Device" "/dev/input/wacom"
Option "Type" "cursor"
Option "Mode" "Relative"
Option "USB" "On"
Option "Speed" "3.0"
Option "Thresold" "10"
EndSection
Section "InputDevice"
Identifier "stylus"
Driver "wacom"
Option "Device" "/dev/input/wacom"
Option "Type" "stylus"
Option "Mode" "Absolute"
Option "USB" "On"
Option "Tilt" "On"
Option "Thresold" "10"
EndSection
Section "InputDevice"
Identifier "pad"
Driver "wacom"
Option "Device" "/dev/input/wacom"
Option "Type" "pad"
Option "ButtonsOnly" "on" # IMPORTANT
Option "Button9" "2"
Option "Button13" "3"
Option "Mode" "Absolute"
Option "USB" "On"
EndSection
Section "Monitor"
# HorizSync source: edid, VertRefresh source: edid
Identifier "Monitor0"
VendorName "Unknown"
ModelName "Maxdata (RogenTech) B102035W"
HorizSync 31.0 - 83.0
VertRefresh 56.0 - 75.0
Option "DPMS"
EndSection
Section "Device"
Identifier "Device0"
Driver "nvidia"
VendorName "NVIDIA Corporation"
BoardName "GeForce 7600 GS"
Option "AddARGBGLXVisuals" "True"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Device0"
Monitor "Monitor0"
DefaultDepth 24
Option "TwinView" "0"
Option "TwinViewXineramaInfoOrder" "CRT-0"
Option "metamodes" "nvidia-auto-select +0+0"
SubSection "Display"
Depth 24
EndSubSection
EndSection
Section "Extensions"
Option "Composite" "Enable"
EndSection
¤ And here is the X11 log:
X.Org X Server 1.6.3
Release Date: 2009-7-31
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.30-ARCH x86_64
Current Operating System: Linux arch 2.6.30-ARCH #1 SMP PREEMPT Mon Aug 17 16:06:45 CEST 2009 x86_64
Build Date: 14 August 2009 11:20:44AM
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Mon Aug 24 20:43:22 2009
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "Layout0"
(**) |-->Screen "Screen0" (0)
(**) | |-->Monitor "Monitor0"
(**) | |-->Device "Device0"
(**) |-->Input Device "Keyboard0"
(**) |-->Input Device "Mouse0"
(**) |-->Input Device "stylus"
(**) |-->Input Device "eraser"
(**) |-->Input Device "pad"
(**) Option "AIGLX" "on"
(==) Automatically adding devices
(==) Automatically enabling devices
(WW) The directory "/usr/share/fonts/default/Type1" does not exist.
Entry deleted from font path.
(**) FontPath set to:
/usr/share/fonts/misc,
/usr/share/fonts/100dpi:unscaled,
/usr/share/fonts/75dpi:unscaled,
/usr/share/fonts/TTF,
/usr/share/fonts/Type1,
built-ins
(**) ModulePath set to "/usr/lib/xorg/modules/extensions/nvidia,/usr/lib/xorg/modules/drivers,/usr/lib/xorg/modules"
(**) Extension "Composite" is enabled
(WW) AllowEmptyInput is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
(WW) Disabling Keyboard0
(II) Loader magic: 0x74c0
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.4
X.Org Video Driver: 5.0
X.Org XInput driver : 4.0
X.Org Server Extension : 2.0
(II) Loader running on linux
(++) using VT number 7
(--) PCI:*(0:1:0:0) 10de:0392:1043:822a nVidia Corporation G73 [GeForce 7600 GS] rev 161, Mem @ 0xfd000000/16777216, 0xc0000000/268435456, 0xfc000000/16777216, I/O @ 0x00008c00/128, BIOS @ 0x????????/131072
(WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
(II) No APM support in BIOS or kernel
(II) System resource ranges:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[5] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
(II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
(II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
(II) "glx" will be loaded. This was enabled by default and also specified in the config file.
(II) "record" will be loaded by default.
(II) "dri" will be loaded by default.
(II) "dri2" will be loaded by default.
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.6.3, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.6.3, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "type1"
(WW) Warning, couldn't open module type1
(II) UnloadModule: "type1"
(EE) Failed to load module "type1" (module does not exist, 0)
(II) LoadModule: "freetype"
(WW) Warning, couldn't open module freetype
(II) UnloadModule: "freetype"
(EE) Failed to load module "freetype" (module does not exist, 0)
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="NVIDIA Corporation"
compiled for 4.0.2, module version = 1.0.0
Module class: X.Org Server Extension
(II) NVIDIA GLX Module 96.43.13 Thu Jun 25 18:28:54 PDT 2009
(II) Loading extension GLX
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions//librecord.so
(II) Module record: vendor="X.Org Foundation"
compiled for 1.6.3, module version = 1.13.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension RECORD
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.6.3, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension XFree86-DRI
(II) LoadModule: "dri2"
(II) Loading /usr/lib/xorg/modules/extensions//libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
compiled for 1.6.3, module version = 1.1.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(II) LoadModule: "nvidia"
(II) Loading /usr/lib/xorg/modules/drivers//nvidia_drv.so
(II) Module nvidia: vendor="NVIDIA Corporation"
compiled for 4.0.2, module version = 1.0.0
Module class: X.Org Video Driver
(II) LoadModule: "evdev"
(II) Loading /usr/lib/xorg/modules/input//evdev_drv.so
(II) Module evdev: vendor="X.Org Foundation"
compiled for 1.6.3, module version = 2.2.4
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 4.0
(II) LoadModule: "wacom"
(II) Loading /usr/lib/xorg/modules/input//wacom_drv.so
(II) Module wacom: vendor="X.Org Foundation"
compiled for 1.6.3, module version = 1.0.0
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 4.0
(II) Wacom driver level: 47-0.8.3-7 $
(II) NVIDIA dlloader X Driver 96.43.13 Thu Jun 25 18:07:12 PDT 2009
(II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
(II) Primary Device is: PCI 01@00:00:0
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.6.3, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Module "ramdac" already built-in
(II) resource ranges after probing:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[5] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
(**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
(==) NVIDIA(0): RGB weight 888
(==) NVIDIA(0): Default visual is TrueColor
(==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
(**) NVIDIA(0): Option "TwinView" "0"
(**) NVIDIA(0): Option "MetaModes" "nvidia-auto-select +0+0"
(**) NVIDIA(0): Option "TwinViewXineramaInfoOrder" "CRT-0"
(**) NVIDIA(0): Option "AddARGBGLXVisuals" "True"
(**) NVIDIA(0): Enabling RENDER acceleration
(II) NVIDIA(0): Support for GLX with the Damage and Composite X extensions is
(II) NVIDIA(0): enabled.
(II) NVIDIA(0): NVIDIA GPU GeForce 7600 GS at PCI:1:0:0 (GPU-0)
(--) NVIDIA(0): Memory: 524288 kBytes
(--) NVIDIA(0): VideoBIOS: 05.73.22.50.00
(II) NVIDIA(0): Detected PCI Express Link width: 16X
(--) NVIDIA(0): Interlaced video modes are supported on this GPU
(--) NVIDIA(0): Connected display device(s) on GeForce 7600 GS at PCI:1:0:0:
(--) NVIDIA(0): Maxdata (RogenTech) B102035W (CRT-0)
(--) NVIDIA(0): Maxdata (RogenTech) B102035W (CRT-0): 400.0 MHz maximum pixel
(--) NVIDIA(0): clock
(II) NVIDIA(0): Assigned Display Device: CRT-0
(II) NVIDIA(0): Validated modes:
(II) NVIDIA(0): "nvidia-auto-select+0+0"
(II) NVIDIA(0): Virtual screen size determined to be 1680 x 1050
(--) NVIDIA(0): DPI set to (99, 98); computed from "UseEdidDpi" X config
(--) NVIDIA(0): option
(--) Depth 24 pixmap format is 32 bpp
(II) do I need RAC? No, I don't.
(II) resource ranges after preInit:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[5] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
(II) NVIDIA(0): Initialized GART.
(II) NVIDIA(0): Setting mode "nvidia-auto-select+0+0"
(II) Loading extension NV-GLX
(II) NVIDIA(0): NVIDIA 3D Acceleration Architecture Initialized
(II) NVIDIA(0): Using the NVIDIA 2D acceleration architecture
(==) NVIDIA(0): Backing store disabled
(==) NVIDIA(0): Silken mouse enabled
(**) Option "dpms"
(**) NVIDIA(0): DPMS enabled
(II) Loading extension NV-CONTROL
(==) RandR enabled
(II) Initializing built-in extension Generic Event Extension
(II) Initializing built-in extension SHAPE
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension BIG-REQUESTS
(II) Initializing built-in extension SYNC
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-MISC
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) Initializing extension GLX
(**) Option "SendCoreEvents" "true"
(**) Option "CorePointer"
(**) Mouse0: always reports core events
(**) Mouse0: Device: "/dev/input/event5"
(II) Mouse0: Found 12 mouse buttons
(II) Mouse0: Found x and y relative axes
(II) Mouse0: Found scroll wheel(s)
(II) Mouse0: Found keys
(II) Mouse0: Configuring as mouse
(II) Mouse0: Configuring as keyboard
(**) Mouse0: YAxisMapping: buttons 4 and 5
(**) Mouse0: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Mouse0" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
(**) Mouse0: (accel) keeping acceleration scheme 1
(**) Mouse0: (accel) filter chain progression: 2.00
(**) Mouse0: (accel) filter stage 0: 20.00 ms
(**) Mouse0: (accel) set acceleration profile 0
(II) Mouse0: initialized for relative axes.
(**) Option "SendCoreEvents"
(**) stylus: always reports core events
(**) stylus device is /dev/input/wacom
(**) stylus is in absolute mode
(**) WACOM: suppress value is 2
(**) Option "Tilt" "On"
(**) Option "USB" "On"
(**) stylus: reading USB link
(**) Option "BaudRate" "9600"
(II) XINPUT: Adding extended input device "stylus" (type: Wacom Stylus)
(**) Option "Device" "/dev/input/wacom"
(EE) xf86OpenSerial: Cannot open device /dev/input/wacom
No such file or directory.
Error opening /dev/input/wacom : No such file or directory
(EE) Couldn't init device "stylus"
(II) UnloadModule: "wacom"
(**) Option "SendCoreEvents"
(**) eraser: always reports core events
(**) eraser device is /dev/input/wacom
(**) eraser is in absolute mode
(**) WACOM: suppress value is 2
(**) Option "Tilt" "On"
(**) Option "USB" "On"
(**) eraser: reading USB link
(**) Option "BaudRate" "9600"
(II) XINPUT: Adding extended input device "eraser" (type: Wacom Eraser)
(**) Option "Device" "/dev/input/wacom"
(EE) xf86OpenSerial: Cannot open device /dev/input/wacom
No such file or directory.
Error opening /dev/input/wacom : No such file or directory
(EE) Couldn't init device "eraser"
(II) UnloadModule: "wacom"
(**) Option "SendCoreEvents"
(**) pad: always reports core events
(**) pad device is /dev/input/wacom
(**) pad is in relative mode
(**) WACOM: suppress value is 2
(**) Option "USB" "On"
(**) pad: reading USB link
(**) Option "ButtonsOnly" "on"
(**) pad: buttons only
(**) Option "Button9" "2"
(**) pad: button9 assigned to 2
(**) Option "Button13" "3"
(**) pad: button13 assigned to 3
(**) Option "BaudRate" "9600"
(II) XINPUT: Adding extended input device "pad" (type: Wacom Pad)
(**) Option "Device" "/dev/input/wacom"
(EE) xf86OpenSerial: Cannot open device /dev/input/wacom
No such file or directory.
Error opening /dev/input/wacom : No such file or directory
(EE) Couldn't init device "pad"
(II) UnloadModule: "wacom"
(II) config/hal: Adding input device Macintosh mouse button emulation
(**) Macintosh mouse button emulation: always reports core events
(**) Macintosh mouse button emulation: Device: "/dev/input/event0"
(II) Macintosh mouse button emulation: Found 3 mouse buttons
(II) Macintosh mouse button emulation: Found x and y relative axes
(II) Macintosh mouse button emulation: Configuring as mouse
(**) Macintosh mouse button emulation: YAxisMapping: buttons 4 and 5
(**) Macintosh mouse button emulation: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Macintosh mouse button emulation" (type: MOUSE)
(**) Macintosh mouse button emulation: (accel) keeping acceleration scheme 1
(**) Macintosh mouse button emulation: (accel) filter chain progression: 2.00
(**) Macintosh mouse button emulation: (accel) filter stage 0: 20.00 ms
(**) Macintosh mouse button emulation: (accel) set acceleration profile 0
(II) Macintosh mouse button emulation: initialized for relative axes.
(II) config/hal: Adding input device Logitech USB Receiver
(**) Logitech USB Receiver: always reports core events
(**) Logitech USB Receiver: Device: "/dev/input/event5"
(WW) Logitech USB Receiver: device file already in use. Ignoring.
(II) UnloadModule: "evdev"
(EE) PreInit returned NULL for "Logitech USB Receiver"
(EE) config/hal: NewInputDeviceRequest failed (8)
(II) config/hal: Adding input device Logitech USB Receiver
(**) Logitech USB Receiver: always reports core events
(**) Logitech USB Receiver: Device: "/dev/input/event4"
(II) Logitech USB Receiver: Found keys
(II) Logitech USB Receiver: Configuring as keyboard
(II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "fr"
Look at this section of the Xorg.0.log file
(**) Option "SendCoreEvents" "true"
(**) Option "CorePointer"
(**) Mouse0: always reports core events
(**) Mouse0: Device: "/dev/input/event5"
(II) Mouse0: Found 12 mouse buttons
(II) Mouse0: Found x and y relative axes
(II) Mouse0: Found scroll wheel(s)
(II) Mouse0: Found keys
(II) Mouse0: Configuring as mouse
(II) Mouse0: Configuring as keyboard
(**) Mouse0: YAxisMapping: buttons 4 and 5
(**) Mouse0: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Mouse0" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
(**) Mouse0: (accel) keeping acceleration scheme 1
(**) Mouse0: (accel) filter chain progression: 2.00
(**) Mouse0: (accel) filter stage 0: 20.00 ms
(**) Mouse0: (accel) set acceleration profile 0
(II) Mouse0: initialized for relative axes.
I think this is the problem. Mouse0 is well detected, configured as a mouse, the as a keyboad and to finish, xinput add it as
type: KEYBOARD
. How can I avoid that? Where am I wrong? Do you see anything else in my configuration, or in the log that can help me?
Hoping someone can help me, I've already open the window...
Regards,
KaB

I've got the same hardware and have not yet experienced any issues. However, I am using openSUSE 11.1 Here the xorg config:
# SaX generated X11 config file
# Created on: 2009-08-08T07:17:17-0400.
# Version: 8.1
# Contact: Marcus Schaefer <[email protected]>, 2005
# Contact: SaX-User list <https://lists.berlios.de/mailman/listinfo/sax-users>
# Automatically generated by [ISaX] (8.1)
# PLEASE DO NOT EDIT THIS FILE!
Section "Files"
FontPath "/usr/share/fonts/misc:unscaled"
FontPath "/usr/share/fonts/local"
FontPath "/usr/share/fonts/75dpi:unscaled"
FontPath "/usr/share/fonts/100dpi:unscaled"
FontPath "/usr/share/fonts/Type1"
FontPath "/usr/share/fonts/URW"
FontPath "/usr/share/fonts/Speedo"
FontPath "/usr/share/fonts/PEX"
FontPath "/usr/share/fonts/cyrillic"
FontPath "/usr/share/fonts/latin2/misc:unscaled"
FontPath "/usr/share/fonts/latin2/75dpi:unscaled"
FontPath "/usr/share/fonts/latin2/100dpi:unscaled"
FontPath "/usr/share/fonts/latin2/Type1"
FontPath "/usr/share/fonts/latin7/75dpi:unscaled"
FontPath "/usr/share/fonts/baekmuk:unscaled"
FontPath "/usr/share/fonts/japanese:unscaled"
FontPath "/usr/share/fonts/kwintv"
FontPath "/usr/share/fonts/truetype"
FontPath "/usr/share/fonts/uni:unscaled"
FontPath "/usr/share/fonts/CID"
FontPath "/usr/share/fonts/ucs/misc:unscaled"
FontPath "/usr/share/fonts/ucs/75dpi:unscaled"
FontPath "/usr/share/fonts/ucs/100dpi:unscaled"
FontPath "/usr/share/fonts/hellas/misc:unscaled"
FontPath "/usr/share/fonts/hellas/75dpi:unscaled"
FontPath "/usr/share/fonts/hellas/100dpi:unscaled"
FontPath "/usr/share/fonts/hellas/Type1"
FontPath "/usr/share/fonts/misc/sgi:unscaled"
FontPath "/usr/share/fonts/xtest"
FontPath "/opt/kde3/share/fonts"
InputDevices "/dev/gpmdata"
InputDevices "/dev/input/mice"
EndSection
Section "ServerFlags"
Option "AllowMouseOpenFail" "on"
Option "ZapWarning" "on"
EndSection
Section "Module"
Load "dri"
Load "dbe"
Load "freetype"
Load "extmod"
Load "glx"
EndSection
Section "InputDevice"
Driver "kbd"
Identifier "Keyboard[0]"
Option "Protocol" "Standard"
Option "XkbLayout" "us"
Option "XkbModel" "microsoftpro"
Option "XkbRules" "xfree86"
EndSection
Section "InputDevice"
Driver "mouse"
Identifier "Mouse[1]"
Option "Buttons" "14"
Option "Device" "/dev/input/mice"
Option "Name" "Logitech USB Receiver"
Option "Protocol" "explorerps/2"
Option "Vendor" "Sysp"
Option "ZAxisMapping" "4 5"
EndSection
Section "Monitor"
DisplaySize 428 255
HorizSync 30-81
Identifier "Monitor[0]"
ModelName "SAMSUNG SYNCMASTER"
Option "DPMS"
Option "PreferredMode" "1440x900"
VendorName "SAM"
VertRefresh 43-75
UseModes "Modes[0]"
EndSection
Section "Modes"
Identifier "Modes[0]"
Modeline "1440x900" 104.58 1440 1520 1672 1904 900 901 904 931
Modeline "1440x900" 85.75 1440 1488 1520 1600 900 903 909 925 +HSync -Vsync
Modeline "1280x960" 105.61 1280 1360 1496 1712 960 961 964 995
Modeline "1280x960" 86.75 1280 1328 1360 1440 960 963 967 988 +HSync -Vsync
Modeline "1024x768" 81.80 1024 1080 1192 1360 768 769 772 802
Modeline "1024x768" 76.16 1024 1080 1192 1360 768 769 772 800
Modeline "1024x768" 69.71 1024 1080 1184 1344 768 769 772 798
Modeline "1024x768" 69.50 1024 1072 1104 1184 768 771 775 796 +HSync -Vsync
Modeline "1024x768" 64.11 1024 1080 1184 1344 768 769 772 795
Modeline "800x600" 48.91 800 840 920 1040 600 601 604 627
Modeline "800x600" 45.50 800 840 920 1040 600 601 604 625
Modeline "800x600" 44.00 800 848 880 960 600 603 607 622 +HSync -Vsync
Modeline "800x600" 42.11 800 840 920 1040 600 601 604 623
Modeline "800x600" 38.22 800 832 912 1024 600 601 604 622
Modeline "1440x900" 106 1440 1520 1672 1904 900 903 909 934 +hsync -vsync
EndSection
Section "Screen"
DefaultDepth 24
SubSection "Display"
Depth 15
Modes "1440x900" "1280x960" "1024x768" "800x600"
Virtual 3840 1200
EndSubSection
SubSection "Display"
Depth 16
Modes "1440x900" "1280x960" "1024x768" "800x600"
Virtual 3840 1200
EndSubSection
SubSection "Display"
Depth 24
Modes "1440x900" "1280x960" "1024x768" "800x600"
Virtual 3840 1200
EndSubSection
SubSection "Display"
Depth 8
Modes "1440x900" "1280x960" "1024x768" "800x600"
Virtual 3840 1200
EndSubSection
Device "Device[0]"
Identifier "Screen[0]"
Monitor "Monitor[0]"
EndSection
Section "Device"
BoardName "ATI Radeon HD 3670"
Driver "radeonhd"
Identifier "Device[0]"
Option "monitor-DVI-I_1/digital" "Monitor[0]"
VendorName "ATI"
EndSection
Section "ServerLayout"
Identifier "Layout[all]"
InputDevice "Keyboard[0]" "CoreKeyboard"
InputDevice "Mouse[1]" "CorePointer"
Option "Clone" "off"
Option "Xinerama" "off"
Screen "Screen[0]"
EndSection
Section "DRI"
Group "video"
Mode 0660
EndSection
Section "Extensions"
EndSection

How to measure time difference between zero crossing of a sine wave and rise time of a pulse on a same graph?

I have a 50Hz sine wave and a pulse signal on a same graph. The phase difference between two is between 0-90 degrees.
Now I need to calculate the time difference between (when the sine wave crosses zero volts) and (when the pulse rises). The frequency will stay approximately same for both signals.
The application is for a three phase generator. In simple words, when the time difference between the zero-crossing of sine wave and the pulse rises increases, that means that the load on the generator has increases.
I am a beginner user of LabView (version 9, 2009), maybe it is a very simple problem but I've been pulling my hair out for the last few days and coudln't figure anything out. Any help would be greatly appreciated. I am using DAQ USB-6008 to measure these voltages and pulse from the generator and a sensor
I have attached a jpg (a graph that i just made with excel to explain). The time 't' is what I am trying to measure
Cheers
Awais
Message Edited by awais.h on 03-30-2010 11:20 PM
Message Edited by awais.h on 03-30-2010 11:21 PM
Solved!
Go to Solution.

Hi
Thanks for the code but I'm afraid it won't work. Like you said the probability of choosing a value that is on both graphs may not happen. This is something that I would like the code to do automatically.
But I did use the previous code posted and made some modifications to it and it seems to work perfectly. Now the next thing is to be able to get just that one value that tells you the first time difference.
Here is what I get using that code.
As you can see from the t Values. I only need the one that is highlighted. If there is a way to filter out the rest it would be great.
I was thinking of a while loop and as soon as the value is higher than 3E-5 it would store the number and stop the loop, but I'm not too familiar with arrays in labview.
Here is the the code modified.
As you can see, it wasn't that big of a modification and it still is your code.
I will keep trying.
Thanks for the help
Attachments:
FinalShockSpeed.vi ‏55 KB

X-Fi Elite Pro and Logitech Z-5500D Speaker se

Hi everybody,
I know there are many threads about the X-Fi and the Logitech Z-5500D but reading all these discussions didn't clarify some things for me.
My first question is: I'm a music lover.. from Classical to Shakira what are the best settings for the X-Fi Elite Pro in conjunction with the Z5500D speakers? I like a normal bass level not the boomy one which has the Logitech by nature.. and a natural sound.
My second question: I have a Xbox360, a DVD player and a Mediacenter 2005 PC (which contains the X-Fi). The Xbox360 and the DVD player are having a Toslink Optical out, but the Z5500D has only one Toslink Optical in, are there any Y connectors for this? or are there any optical-to-coax converters to use the coax SP/DIF connector of the Z5500D?
My last question: Is it recommended to use the normal three mini jacks on the rear of the X-fi for 5. surround out to the Z5500D or do i get better results with the Toslink or the coax out?
Thanks in advance..
Victor

Except if you send DD/DTS multichannel sound to your receiver, you'll not have surround sound with digital connection. did you read the stikies?

Connecting sb2 audigy zs digital output to logitech z-5500 speakers

i currently have the 5 year old FPS 2000 cambridge soundworks digital speakers. i currently use the digital out on my augidy 2 zs, with the digital in adapter to connect to the speakers. (http://us.creative.com/products/product.asp?category=4&subcategory=30&product=0375)
i am planning on purchasing the logitech z-5500 and have been reading on these boards that i can get the (http://www.radioshack.com/product.asp?cookie%5Ftest=&catalog%5Fname=CTLG&cat egory%5Fname=CTLG%5F007%5F002%5F003%5F008&product% 5Fid=42%2D2444) digital out minijack to digital out rca jack that the logitech speakers accept.
i read on this boart about the limitations of using this digital connection - would the limitations be exactly the same that i currently have (using the digital out to the fps 2000) or would this be a more limiting configuration?

i currently have the 5 year old FPS 2000 cambridge soundworks digital speakers. i currently use the digital out on my augidy 2 zs, with the digital in adapter to connect to the speakers. (http://us.creative.com/products/prod...0&product=0375)
i am planning on purchasing the logitech z-5500 and have been reading on these boards that i can get the (http://www.radioshack.com/product.as...5Fid=42%2D2444) digital out minijack to digital out rca jack that the logitech speakers accept.
you wrote about the limitations of using this digital connection - would the limitations be exactly the same that i currently have (using the digital out to the fps 2000) or would this be a more limiting configuration?

Audigy 4 Digital Out with DTS 55

Hi there
Is it possible to connect a Audigy 4 (not the pro version) with a optical cable to a 5500er DTS Station?$
Ive got this combo and i think it wont work (optical out on audigy 4 is just show?)
My soundcard works with other connections but not with optical. And the solution to connect the 3 minijack cables from the DTS5500 directly to the soundcard is not a solution.
Please help me
Greetings

The Digital output jack on the card isn't of optical signal type.....you will need to get those I/O module mention bt johnston2 for optical connection.

HELP! Audigy 2 ZS Notebook used with Vista and can't reco

I just installed my Audigy 2 ZS Notebook PCMCIA card and cannot figure out how to record in both Adobe Audition .5 and Sony Acid 6.0b.
The info I'm missing is:
) Which device to set as the "default" in the Windows Vista "Recording Devices" area.
2) What "Audio Device" to use as well as the "Default Audio Recording Device" in Sony Acid 6.0b.
3) The "Recording Device Order" and the "Wave In Device Properties" for Adobe Audition .5
Any help would be greatly appreciated as I'm a musician and really need to get recording.
Thank you!

I
The result of the last install: Crashed with blue screen, Two lines are in the messages, that are not part of the explanation, on how to fix the problem:
(I took a photo, but my just missed, so all the text is washed, but readable: The unrecognised letter replaced with ?)
I?Q?_NOT_LESS_OR_EQUAL
(Propably IRQA or IRQE)
Thecnical Information:
*** STOP: 0x0000000A (0x00000000, 0x00000002, 0x0000000, 0x82C6870F)
Source:?? Microsoft-Windows-WER-SystemErrorReporting
D?tum:?? 2009.09.26. :54:43
Event ID:00
Description:
Tells that the action was the code, that I was wrote above, and the report id is 092609-33992-0.
Event in XML:
<Event xmlns="<a rel="nofollow" href="http://schemas.microsoft.com/win/2004/08/events/event"]http://schemas.microsoft.com/win/2004/08/events/event[/url]">
? <System>
? rovider Name="Microsoft-Windows-WER-SystemErrorReporting" Guid="{ABCE23E7-DE45-4366-863-84FA6C525952}" EventSourceName="BugCheck" />
? <EventID Qualifiers="6384">00</EventID>
? <Version>0</Version>
? <Level>2</Level>
? <Task>0</Task>
? <Opcode>0</Opcode>
? <Keywords>0x80000000000000</Keywords>
? <TimeCreated SystemTime="2009-09-26T09:54:43.000000000Z" />
? <EventRecordID>6322</EventRecordID>
? <Correlation />
? <Execution ProcessID="0" ThreadID="0" />
? <Channel>System</Channel>
? <Computer>XXX</Computer>
? <Security />
? </System>
? <EventData>
? <Data Name="param">0x0000000a (0x00000000, 0x00000002, 0x0000000, 0x82c6870f)</Data>
? <Data Name="param2">C:\Windows\MEMORY.DMP</Data>
? <Data Name="param3">092609-33992-0</Data>
? </EventData>
</Event>
After restart, the bios test freezez in the final frazes, and force shutdown and restart, functions well again. The sound card is in while booting.
No driver confilcts.
I've uploaded the dmp file here: <a rel="nofollow" href="http://pantonite.extra.hu/bin/MEMORY.DMP"]http://pantonite.extra.hu/bin/MEMORY.DMP[/url]

Audigy 2 Value - Trouble with Newest Drivers and Equali

Just got my Audigy 2 Value yesterday. I know its an old model, but I found a new one for a bargain price. Anyway, I initially installed everything from the CD. The driver installed along with the mixer, equalizer, Creative console, etc... When I realized how old the driver was on the CD (2004) I uninstall it, wiped everything clean with DriverCleaner and installed the newest drivers for Audigy (July 08). I discovered the ones on the website don't include all the various applications such as the mixer and equalizer. Just an basic version of the creative console.
I browsed the CD and installed just the apps I wanted -Mixer, Equalizer,Speaker Settings and Calibrator and Diagnostics. They all work fine save for the Equalizer. It just closes with an error message. Its not the most critical piece - the mixer is where I can at least adjust the bass and treble - but I would like to have it if possible.
Any ideas on getting the Equalizer to run with Windows XP and the newest Audigy drivers Are there any up-to-date downloads available on the Creative website with all the CD applications? The fact they are four years old vs. a new driver is most likely the problem. I did not install any of the Creative MediaSource applications. Just wanted the driver only. Would the lastest downloads for them possible have all those apps in current form (or are the install CD ones all I can get)? Thanks for you help!

BJ,
You can check the product information system requirement from the product page.
http://us.creative.com/products/product.asp?category=&subcategory=204&product=0653 &nav=systemRequirements
Jason

I want to but can't play WAVs and MP3s in the same folder, please he

Hello,
I have a Zen Nano Plus. One of the reasons I got it was because it has a built in microphone. When you record with the mic it saves it as a WAV file, and puts it in the "recorded" file. I want to make a folder with both songs (mp3s) and bits of spoken word that I record in - so that when I play it I can select shuffle and it will randomly play either a song or a recorded part. (It's for a friend in a coma and we want to leave it playing her favourite songs as well as messages from her friends.) When I make a new folder it won't recognise WAVs only the MP3s, and when I put MP3s in the "recorded" file it won't recognise them, only the WAVs. The shuffle option will only shuffle between tracks in the same folder. I've called the help line and spent half an hour talking to them but nothing was solved. I realise that I can convert the WAV files into MP3 files (anyone recommend a good, free converter?) but would rather not have to do this. Also, if it is possible to play both in the same folder, can I also record through the mic directly into this folder? This would save me having to take it home whenever a new message is left to organise the tracks.
Any help given very much appreciated,
Anil.

Firmware is the operating system of the player, written by Creative. Peebee is saying that it would require a fundamental change to this operating system, which would need to be reprogrammed by Creative. You can by all means request it as a wishlist item, by sending to support, but there's no guarantee it will be implemented.

My SB Audigy 2 card can't use headset and musicamplifier at the same time

Hi, i just bought a SB Audigy 2 [D400] and i have downloaded drivers and programs. I run Windows XP SP2.
The soundcard works fine but it is very very annoying that i physically have to change the jack in the green=line out jack from headset to musicamplifier when i want to use my musicamplifier and change back the jack in the green=line out from musicamplifier to headset when i just want to use the headset/headphones .
In the shop they told my that i can connect both amplifier and headset at the same time and then with creative software control whether there is sound in the headset or in the amplifier. But i can't simple get it work.
I tried to use the green to the amplifier and the headset/speakers in the black (line out 2) and then with creative speaker settings softeware choose headphones but still the ampliefier receive the sound and no sound in the headphones. Why? In fact no matter what configuration i try the headphones doesn't work.
But if i change the jacks so headset is in the green line out then only headset is working and the amplifier doesn't work no matter i put it in sort=line out 2 jack or orange=line out 3 jack.
Can somebody here tell me if it is possible or not to connect both headset and external amplifier and control by software which to play? and how?
please help, thx.
Michael

If you can have an ASIO compatible music playing system, then it might be possible to have system like you wish when using Creative Audigy 2 card. Since ASIO bypasses Windows Audio System, you can use both 'drivers' (ASIO - WDM/MME/DS) side by side.
Say you want to play a game (using headset /w mic) and someone other like to listen music at the same time. With ASIO capable system you can output your music for example to "center L/R (stereo) channels" and same time output sounds from other source (using MME/DS/WDM drivers) to normal output channel (Front L/R). Only thing is, you need to set your speakersystem to 4 or 6 (depending which other channel you're using) (and for better 'balance' to adjust "angle" on THX console. You get the THX console by installing Audigy 2 Zs software).
Try for example http://img332.imageshack.us/img332/463/djs9mo.jpg[/img] width="406" alt="Image Hosted by ImageShack.us" >
Another option:
Say you want to play music through external amplifier and play game online with your headset + microphone (eg. others but you listen the music, you play games)
--> try free http://img332.imageshack.us/img332/4589/tbp7rz.jpg[/img] width="406" alt="Image Hosted by ImageShack.us" >
If you use ASIO on BeatPort Player you can select L/R individually from the list(s). Same rules as described earlier.
= You can play from 2 different sources simultaoneusly (ASIO + WDM/MME/DS) to two different outputs without disturbance. The other (WDM/MME/DS) source is set 'automatically' output to (Audigy) "green" port, and the other (ASIO) to "black" or "orange" port (as set).
.jtpMessage Edited by jutapa on 09-5-2005 05:30 AM

Creative Mediasource and the

Hi everybody. I am new to this forum but I have been a Creative user for a long time. My question is this I just bought a new 8gb Zen and the software that came with it did not include the Creative Mediasource organizer. I love the mediasource organizer becouse it puts everything in one easy window, i can see all of the songs on my computer and also what is already on my player. The Zen Media Organizer that came with my new Zen is not very easy to work with. It just shows the songs as File folders. Am I missing something here, why doesn't the new Zen come with the Mediasource Organizer. I like the Mediasource better than Windows Media Player. Please Help

By the Way this is the Email I got from Creative when I asked the same thing
[color="#ff0000"]Thank you for contacting us at Creative Support Service, I am glad to
provide my assistance to you.
I understand that you are enquiring on how to use ZEN Mediasource
application with ZEN player. I would like to apologize for any
inconveniences this enquiry is causing you. Let me see what I can do to
assist you in resolving the issue you facing.
You would like to be informed that ZEN player would only be able to use
on ZEN Mediaexplorer.
Please do include this email upon replying to us. If you do require
additional assistance on the issues you are facing, please reply to this
email with any previous correspondence to ensure the quickest and most
accurate service.
Once again, thank you for contacting us.
Best Regards,
**removed**
Technical Support
Creative Labs Americas
Is it just me or does that not really make sense?
Admin notes: Please leave out the name of the advisor when making such posts.
Message Edited by KokChoy-CL on <span class='local-date'> 07-03-2008<span class='local-time'> 0:42 PM

How to create sine wave and step input using cwgraph in VB 6.0

hello..
i'm doing my master's project now. i'm stuck on how to create a sine wave and a step input using the cwgraph using VB 6.0. please help. thanks.

hello..thank for the reply.
i'm having problem with my coding using cwgraph. can anyone help. everytime i do the full compile, there's error.but it can still can run, but can't convert to application form.for your info, i'm using RTscope and cwgraph to plot graph.the error is in the cwgraph coding.below are part of the coding with error. and can somebody tell me how to add cwgraph component in the VB? i try adding component, but it's not in the list of component,and i've browse for it already too.i'm doing the software at home, but i'can run it at my lab cause cwgraph component is not listed.please help.
Dim countTime As Integer, count1 As Integer, countFreq As Integer, countVolt As Integer
Private Sub cmdRun_Click()
If cmdRun.CausesValidation = True Then
cmdPause.CausesValidation = False
tmrOsc2.Enabled = True
tmrOsc3.Enabled = True
Else
cmdPause.CausesValidation = False
tmrOsc2.Enabled = False
tmrOsc3.Enabled = False
For count1 = 0 To 100
Data1(count1) = 0
Data2(count1) = 0
RT1.Value(1, count1) = 0
RT1.Value(2, count1) = 0
RT1.Refresh
CWGraph2.Plots(1).PlotY count1 ' THIS CODING HAS AN ERROR ...
CWGraph2.Plots(2).PlotY count1 ' THIS CODING HAS AN ERROR ...
Next count1
End If
End Sub

How to use base band wave,subcarrier wave and carrier wave to creat the FM wave? When I use the MT Modulate FM VI in USRP,I don't konw how to use it.

How to use base band wave,subcarrier wave and carrier wave to creat the FM wave? When I use the MT Modulate FM VI in USRP,I don't konw how to
use it.

https://decibel.ni.com/content/docs/DOC-24206
Let us know if that example doesn't help you
Anthony F.
Product Marketing Engineer
National Instruments

Audigy 2 ZS, Mediasource 5, DTS wav and the Logitech Z-5500 speak

Similar Messages

Maybe you are looking for