Audigy 2 ZS not being properly detect

After clearing the CMOS battery of my mother board, my Audidy 2 ZS is not being properly reconized in Windows. Right now its showing up as just an "Other PCI Bridge Device" which Im pretty certain is the Audigy card as its the only PCI device that I have installed. I have disabled the onboard sound of my motherboard, an Asus A8N-SLI Deluxe, and gone through the Creative driver removal process. I have also reseated the card as well as tried it in another PCI slot. When I try and install the latest drivers from Creative I get an error that says that it doesnt detect a supported device. Im not quite sure what else I can try, so any assistance is appreciated.

Are you sure this is the Audigy card? If it says PCI Bridge, then it cannot be the Audigy. It must be the nForce's PCI Controller, under which the Audigy works. The Audigy is not even detected by Windows. I would recommend completely uninstalling all non-Windows drivers and reinstalling them, starting from the chipset.Message Edited by alexs3d2 on 02-22-200602:36 AM

Similar Messages

Text Encoding (Big 5) not being auto-detected

I just had to reinstall OS X (10.4, the upgraded to 10.4.9) due to a bad crash. In Safari (2.0.4), I tried to view a particular page.
http://www.ettoday.com/
This is a Big-5 (chinese) encoded page; I have my Default Text Encoding set to Western (ISO Latin 1), and the page looks garbled when I try to view it, unless I go to View->Text Encoding->Traditional Chinese (Big 5), and then it displays correctly. My question is, why isn't this encoding being auto-detected and display correctly without manually setting it? Looking at the source, about 22 lines down there is this:
<meta http-equiv="ªF´Ë·s»D³ø" content="text/html; charset=big5">
which looks like the appropriate specification of the encoding. Can someone who has chinese fonts installed please verify this? Is this something Safari is doing wrong, or possibly something got lost in my system reinstall (to tell the truth, I can't recall specifically if this was a problem prior to my crash).
Thanks,
David

Ok, thank you. I gave up trying to understand html right around when the "blink" tag came out, and I just get paranoid every time I do a reinstall that I'm missing some critical part. I like the validator-- never knew about that.
Now, if you do a search on the source code for that ETToday page, somewhere far down you'll come to another section that reads:
<head>
<title>Untitled Document</title>
<meta http-equiv="Content-Type" content="text/html; charset=big5">
blah blah blah
This does appear to be properly formatted, and maybe it's there specficially for English-default browsers. However, perhaps neither Safari nor the validator are picking up this, or maybe it's referring to something else altogether?
thanks,
dave

HT1495 What do I do if none of my devices are being properly detected by iTunes when using multiple libraries (mostly via wifi sync)?

Have a Windows 7 machine with terabytes of HDD space and 8 Gigs RAM. Two iTunes libraries (mine and my wife's with about 10% file overlap). Two iPhone 5s (iOS 6.0.2), 1 iPad 2 (iOS 6.0.1), 1 iPad 3 (iOS 5.1.1), and a jailbroken iPhone 3GS 32 GB that we've converted to an iPod essentially (iOS 3. something--not willing to update given the historically bad performance of the new iOS on the 3GS). Running iTunes 10 (also not willing to update to 11 after reading reviews).
I get multiple errors in both libraries with lots of popup boxes saying devices cannot connect, be properly identified, or sync, etc. Disconnecting and reconnecting via cable is marginally better (more so with the 3GS less with the iPads).
I'd like to be able to link certain devices to certain libaries (i.e. my iPhone5 and iPad3 with my library and my wife's iPhone5, iPad2, iPhone 3GS with her library). Instead it seems the wrong devices always show up or none at all.
Any suggestions would be most welcome. I have a moderately high level of tech expertise, so if there are scripts or hacks to be written/run I wouldn't be shy about trying them. Also would consider an iTunes alternative given that Apple isn't interested in supporting users with massive music libraries who need powerful databases as opposed to the dumbed down stuff they are trying to push in 11.
Thanks!
PS also my home sharing doesn't work at all on any device, but that seems to be Apple standard
tags: home_sharing ios windows7 working sync_itunes iphone5 ipad2 ipad3 iphone3gs multiple_libraries multiple_users multiple_devices sync itunes10 computer 10.5

Latest problem now with iTunes is that I can't connect to the iTunes store or update art work. Freezes up. Clearly they nerfed old iTunes to make us upgrade to an inferior version. So frustrating.

Playlist listings not being properly copied to iPhone

I've recently moved my iTunes media files off the Mac and onto a network drive (after a lot of library tidying-up), and everything from that perspective is running smoothly. Both iPhone and iPad can receive selected music/podcasts/video etc.
But I have a problem with playlists on the iPhone. Even though the contents of a playlist are being copied over successfully to the iPhone, the playlist on the phone doesn't contain all of the entries. So if I have a playlist called 'Car' with 17 songs, the 17 songs are all copied over but the playlist only lists 8 songs.
After syncronisation, I can browse the contents of the iPhone in iTunes and look at the copied-over playlist, and it will list 17 songs. But if I look at the contents of the playlist on the iPhone it will still leave some entries out.
By the way, the iPad is behaving itself.
Can anyone offer guidance and suggestions on this rather odd problem?

Fixed my own problem, thanks to this tip elsewhere in the Support Community:
https://discussions.apple.com/message/17562379#17562379
You do have to reboot the iPhone though (original poster thinks you may not have to).

HT201209 My daughter tried to use the following gift card that she had received and received a message about it not being properly activated.

My daughter tried using an iTunes gift card that she received and it indicated that it was not properly activated.
<Edited by Host>

Do not post card codes or any other personal information in these forums. These are open, public forums, not a way to communicate with Apple, so posting any such information here just gives it to the entire world. I'll ask the Hosts to remove the code and you'll just have to hope that no one is able to redeem the code before you can.
As to the problem, what you normally should do when you have an iTunes card that has not been activated is go back the retailer from whom you purchased the card and discuss the problem with them. They should either correctly activate the card or give you a new one. If they refuse to help, as some retailers do, or you don't know or can't get to the retailer, go here:
iTunes Support
and follow the instructions to report the issue to the iTunes Store. They will ask for a scan of the front and back sides of the card as well as a scan of the receipt
Regards.

New 1242 APs not being properly recognized in WCS

I manage a deployment of several hundred APs, almost all of them 1242ag and the last few that were added to the system have been coming up strangely in WCS. The controllers seems to recognize them but I have gotten warning messages that they are in the wrong rf domain in WCS. I also see that most show up with blank model numbers, ap type "unknown" and no serial number listed. When I go into the individual radios I can not configure the antenna by model number. They appear normally in the 4404s but not in WCS. I am at a loss as this functionality is only lost on the last 10 aps I have added to the system and they are recognized in the 4404 controllers they are landing on.

verify the configuration with this one:
version 12.4
no service pad
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
hostname WGB
logging buffered 200000 debugging
enable secret 5 $1$xPtX$hjxzdWVR9qa4ykoxLYba91
no aaa new-model
clock timezone MST -7
dot11 ssid EAPTLS
authentication network-eap eap_methods
authentication key-management wpa version 1
dot1x credentials EAPTLS
dot1x eap profile EAPTLS
infrastructure-ssid
power inline negotiation prestandard source
eap profile EAPTLS
method tls
crypto pki trustpoint COPY-PASTE
enrollment terminal
subject-name CN=WGB
revocation-check none
rsakeypair manual-keys 1024
crypto pki certificate chain COPY-PASTE
certificate 1379B07200000000000C
quit
certificate ca 612683248DBA539B44B039BD51CD1D48
quit
dot1x credentials EAPTLS
username WGB
pki-trustpoint COPY-PASTE
username Cisco password 0 Cisco
bridge irb
interface Dot11Radio0
no ip address
no ip route-cache
encryption mode ciphers tkip
ssid EAPTLS
packet retries 128 drop-packet
station-role workgroup-bridge
no dot11 qos mode
bridge-group 1
bridge-group 1 spanning-disabled
interface Dot11Radio1
no ip address
no ip route-cache
shutdown
station-role root
bridge-group 1
bridge-group 1 subscriber-loop-control
bridge-group 1 block-unknown-source
no bridge-group 1 source-learning
no bridge-group 1 unicast-flooding
bridge-group 1 spanning-disabled
interface FastEthernet0
no ip address
no ip route-cache
duplex auto
speed auto
bridge-group 1
bridge-group 1 spanning-disabled
interface BVI1
ip address dhcp client-id FastEthernet0
no ip route-cache
ip http server
no ip http secure-server
ip http help-path
http://www.cisco.com/warp/public/779/smbiz/prodconfig/help/eag
bridge 1 route ip
line con 0
line vty 0 4
login local
sntp server 10.0.47.1
end

SWC not being properly included? (screenshots)

Hi, I'm kind of new to all this. I have a SWC that I've compiled, and I'm sure I've compiled it correclty, and it has the required classes in it. See here:
http://www.otleylogic.com/screenshots/Screen%20Shot%202013-12-01%20at%206.26.14%20AM-1AJLQ CaF7E.png
I've also tested this SWC in flash cs6, and it's working as expected.
Now, I want to use this SWC in a FlashCC project. So, I drop Stratum.swc into the root folder of my project. I then execute these commands:
java -jar ~/crossbridge/sdk/usr/lib/asc2.jar -merge -md -strict -AS3 \
                    -import ~/crossbridge/crossbridge/sdk/usr/lib/builtin.abc \
                    -import ~/crossbridge/crossbridge/sdk/usr/lib/ISpecialFile.abc \
                    -import ~/crossbridge/crossbridge/sdk/usr/lib/CModule.abc \
                    -import ~/crossbridge/crossbridge/sdk/usr/lib/playerglobal.abc \
                    --library Stratum.swc \
                    Console.as -outdir . -out Console
(This works fine). Then this one:
./Console.abc, 1610 bytes written in 30.594 seconds
"~/crossbridge/sdk/usr/bin/g++" -Werror -Wno-write-strings -Wno-trigraphs -O4 scrypt.cpp -static libcrypto.a -I./ -I./openssl/ -I./lcoin/ -symbol-abc=Console.abc -emit-swf -swf-version=17 -swf-size=800x600 -o scrypt.swf
(This also compiles fine). The SWF gets generated, then I see this error:
http://www.otleylogic.com/screenshots/Screen%20Shot%202013-12-01%20at%206.23.44%20AM-3APmD d633q.png
Here's the line of code it's complaining about:
var stratum = new com.application.stratum.Stratum();
stratum.connect("127.0.0.1", 33333);
I've also tried doing import com.application.stratum.Stratum() up top, then do "new Stratum()" and I get the same error.
I must be doing something silly. Can you help me figure out what that is?

Which version were you using before?
Some font issues may be caused by graphics hardware acceleration. Since this feature was added to Firefox, it has gradually improved, but there still are a few glitches.
You can disable it, but you might need to restart Firefox in order for this to take effect, so save all work first (e.g., mail you are composing, online documents you're editing, etc.).
orange Firefox button ''or'' classic Tools menu > Options > Advanced
On the "General" mini-tab, uncheck the box for "Use hardware acceleration when available"
Does that make any difference?

Release notes for 2.16 states that there was a fix for alerts not being modal. We are using 3.0.6 and are experiencing the same issue; was there a regression to the modal fix. What version needs to be used to make sure that alert messages are modal?

Release notes for 2.16 states that there was a fix for alerts not being modal. We are using 3.0.6 and are experiencing the same issue; was there a regression to the modal fix. What version needs to be used to make sure that alert messages are modal?

We are trying to determine why alert boxes are not modal
The fix states it's for Firefox 2.0 - 3.7a1pre
We are using 3.0.6 not the current version of 3.6.13.
Add-on release notes 2.16.1
https://addons.mozilla.org/en-US/firefox/addon/foxyproxy-standard/versions/
Repeating 2.16 release notes since 2.16 was not made available for more than a couple of hours
Fixed bug whereby some alert boxes weren't properly parented/owned. This led to some alerts not being properly modal
with respect to the window/dialog that issued the alert.

Albums are not sorted properly by their titles

I'm using itunes for windows (the latest version).
And I have a problem with album sorting - they're not being properly sorted by their titles.
As you can see it from above, I'm grouping music by genres and inside one genre (in this case, piano sonata), I want to sort them with their titles.
I chose the option which says it sorts by title, but as you can see it's not working properly.
Chopin (C) - Schumann (S) - Liszt (L) - Barber (B)...
Actually most of albums are sorted correctly, but only some of the albums seem to be put on the wrong places.
Is this problem known and is there way to fix this?
It's not a critical problem but it's quite annoying for me...
If there's a way please let me know.
Thank you!

HJ Lee,
For one of the problem tracks, right-click, Get Info and look at the Sorting tab. There may be information there that is overriding the main tags.
If so, you can edit it in that tab.

Applications not being processed in CustomSettings.ini or missing from ZTIApplications

Using MDT 2012 Update 1 and started having a weird issue where MandatoryApplications properties are being skipped over during the deployment process.
CustomSettings.ini is configured to process [Default] first, followed by model specific subsections for fixing up minor things that are specific to that model. There are MandatoryApplications settings under each subsection, and it ends up looking similar
to this...
[Settings]
Priority=Default, Model
[Default]
MandatoryApplications001={f3389f14-6071-414b-b989-08e35cf82f27}
[HP EliteBook 840 G1]
MandatoryApplications002={d13e2dc4-3b27-4173-b143-30b5f57d7e53}
Applications defined under [Default] install just fine, but nothing under the model subsections installs. No errors, also.
BDD.log shows...
------ Processing the [DEFAULT] section ------ ZTIGather 4/17/2014 9:48:41 AM 0 (0x0000)
Property MANDATORYAPPLICATIONS001 is now = {f3389f14-6071-414b-b989-08e35cf82f27} ZTIGather 4/17/2014 9:48:42 AM 0 (0x0000)
Added value from [DEFAULT]: MANDATORYAPPLICATIONS = {f3389f14-6071-414b-b989-08e35cf82f27} ZTIGather 4/17/2014 9:48:42 AM 0 (0x0000)
------ Processing the [HP EliteBook 840 G1] section ------ ZTIGather 4/17/2014 9:48:42 AM 0 (0x0000)
------ Done processing \\Server\ProductionShare$\Control\CustomSettings.ini ------ ZTIGather 4/17/2014 9:48:43 AM 0 (0x0000)
ZTIApplications.log shows...
Microsoft Deployment Toolkit version: 6.1.2373.0 ZTIApplications 4/17/2014 10:06:35 AM 0 (0x0000)
The task sequencer log is located at C:\Users\ADMINI~1\AppData\Local\Temp\SMSTSLog\SMSTS.LOG. For task sequence failures, please consult this log. ZTIApplications 4/17/2014 10:06:35 AM 0 (0x0000)
Write all logging text to \\Server\productionshare$\logs ZTIApplications 4/17/2014 10:06:35 AM 0 (0x0000)
Validating connection to \\Server\productionshare$\logs ZTIApplications 4/17/2014 10:06:35 AM 0 (0x0000)
Already connected to server Server as that is where this script is running from. ZTIApplications 4/17/2014 10:06:35 AM 0 (0x0000)
Language/Locale Identified (in order of precedence): 1033,0409,0x0409,9,0009,0x0009 ZTIApplications 4/17/2014 10:06:35 AM 0 (0x0000)
Processing Application Type: MandatoryApplications ZTIApplications 4/17/2014 10:06:35 AM 0 (0x0000)
Ready to install applications: ZTIApplications 4/17/2014 10:06:36 AM 0 (0x0000)
################ ZTIApplications 4/17/2014 10:06:36 AM 0 (0x0000)
Entry: {f3389f14-6071-414b-b989-08e35cf82f27} ZTIApplications 4/17/2014 10:06:36 AM 0 (0x0000)
Name: SysConfigs ZTIApplications 4/17/2014 10:06:36 AM 0 (0x0000)
################ ZTIApplications 4/17/2014 10:06:36 AM 0 (0x0000)
Using a local or mapped drive, no connection is required. ZTIApplications 4/17/2014 10:06:36 AM 0 (0x0000)
Change directory: Z:\Applications\SysConfigs ZTIApplications 4/17/2014 10:06:36 AM 0 (0x0000)
Run Command: \\Server\ProductionShare$\Tools\X64\bddrun.exe sysconfigs.bat ZTIApplications 4/17/2014 10:06:36 AM 0 (0x0000)
ZTI installing application ZTIApplications 4/17/2014 10:06:36 AM 0 (0x0000)
Event 41031 sent: ZTI installing application ZTIApplications 4/17/2014 10:06:36 AM 0 (0x0000)
About to run command: \\Server\ProductionShare$\Tools\X64\bddrun.exe sysconfigs.bat ZTIApplications 4/17/2014 10:06:36 AM 0 (0x0000)
Command has been started (process ID 3624) ZTIApplications 4/17/2014 10:06:36 AM 0 (0x0000)
Return code from command = 0 ZTIApplications 4/17/2014 10:06:36 AM 0 (0x0000)
Application SysConfigs installed successfully ZTIApplications 4/17/2014 10:06:36 AM 0 (0x0000)
Event 41033 sent: Application SysConfigs installed successfully ZTIApplications 4/17/2014 10:06:36 AM 0 (0x0000)
Property InstalledApplications001 is now = {f3389f14-6071-414b-b989-08e35cf82f27} ZTIApplications 4/17/2014 10:06:36 AM 0 (0x0000)
Processing Application Type: Applications ZTIApplications 4/17/2014 10:06:37 AM 0 (0x0000)
Application List is empty, exiting ZTIApplications.wsf ZTIApplications 4/17/2014 10:06:37 AM 0 (0x0000)
ZTIApplications processing completed successfully. ZTIApplications 4/17/2014 10:06:37 AM 0 (0x0000)
Event 41001 sent: ZTIApplications processing completed successfully. ZTIApplications 4/17/2014 10:06:37 AM 0 (0x0000)
So it ends up looking like the Applications List is not being properly populated, or something is just not processing CustomSettings.ini correctly. I've double-checked that the applications are hidden and enabled on the share, and have deleted/recreated
the applications on the share.
Anyone have any ideas?

For each section in your CS.ini, start your applications list with 001, like this :
[Settings]
Priority=Default, Model
[Default]
MandatoryApplications001={f3389f14-6071-414b-b989-08e35cf82f27}
[HP EliteBook 840 G1]
MandatoryApplications001={d13e2dc4-3b27-4173-b143-30b5f57d7e53}

HT201209 itune code has not been properly activated

who and how do i contact support about my card not being properly activated. step by step please

Hi K9gunnyddb,
Contact iTunes Support at the link below. Select each option that best suits your situation. You will be given an opportunity to put in a description of the issue as well. Once you complete the steps and submit, iTunes support will usually get back to you within 24 hours by email to help resolve your problem:
https://expresslane.apple.com/Issues.action
Cheers and good luck!
GB

I just moved my itunes library from a win 7 computer to a win 8.1 computer. Getting an error message "iTunes has detected a problem with your audio configuration. Audio/Video playback may not operate properly. Can't play CDs or get audio file from web!

Help! I just moved my itunes library from a Win 7 computer to a new Win 8.1 computer following the instructions on the itunes website. Everything is good except I'm getting an error message on the Win 8 computer if I try to play a CD or get an audio file off of the internet. I get an error message that says "iTunes has detected a problem with your audio configuration. Audio/Video playback may not operate properly. I don't know where to look for or fix the audio configuration on the win 8 computer. As far as I can tell the iTunes configuration looks the same as on the other computers in the house. At this point I don't dare plug my ipod touch into the Win 8 computer for fear it will get messed up.

I have the same problem and I know that it is due to my PCI Audio driver not being compatible with WIndows 8.1.
iTunes isn't the only program that can't direct sound to the built-in speakers anymore. The obvious solution would be to update the drivers, but unfortunately Dell does not provide an updated driver for my model, so I am stuck with that.
However, saying that, only my laptop speakers are affected by this. I can use sound fine on applications where I can choose the output device and direct sound to the head phones, but for some reason iTunes does not let you choose the audio device manually.
To listen to music I imported the iTunes Library in Windows Media Player and changed the audio output using the following instructions: http://windows.microsoft.com/en-us/windows7/c00d11ba
However, I would also like to rent movie's from iTunes,
Would be great if iTunes would let you choose the output device, too, like most other applications using sound from Skype to Windows Media Player,...

Audigy 2 Isn't Being Detected Correc

This is a weird problem that I can't find out anything about anywhere online.
Basically I left home for a week and when I got back my sound was very crackly, with some movies and songs not playing at all. I restarted my PC to see if it helped after checking the speaker connections and testing them with my onboard sound.
After the restart the SoundCard refused to work at all. I reinstalled the drivers and ran Creative Diagnostic which then resulted in the card apparently not being detected.
I did a manual install as recommended on the Creative Knowledge Base which resulted in the following items being detected in Windows:
- PCI Input Device
- System Interrupt Device (x2)
- Mass Storage Device
- VGA Device
None of these had appeared before and bearing in mind that the only PCI device I own is the Audigy 2 Platinum (my graphics are PCI-E) this REALLY confuses me (the EMU Processor is definitely present when using other diagnostic programs: the SoundCard does exactly the same thing on 2 of my friends PC's by the way).
Any help would be greatly appreiciated as the card is bearly 3 months old and there is no way it could have been damaged during my time away (locked door, unplugged at the mains).
UPDATE: Since getting the latest drivers I have sucessfully installed the soundcard but the above items are still listed in device manager and I still recieve absolutely no sound at all!? PLEASE HELP!!
Message Edited by whiteythomson on 2-03-20062:39 PM

no, i am just talking about the display attached to the computer. It doesn't seem to always do it either, this time when i started up it was ok, but sometimes when i start up or when it has been sleeping for a while it comes up without detecting the screen. the first time that it happened it was set to like 800x600 or whatever and it was all stretched and pixelated and i changed it to 1400x900, because the default 1440x900 wasn't listed and now when it doesn't detect the screen, it goes to that. Then like i said i have to go into system prefs and click detect screen for it to bring back the original settings. it is very odd, has anyone else experienced this problem?
MacBook Pro 15" Mac OS X (10.4.8)

New Zen Touch not being detected by Windows

I just bought a 20 gig Zen Touch off ebay, and tried to get it to run.
The firmware on the Zen tells me it's version 2..0, which is the PlaysForSure version. So, I downloaded the driver specific to PlaysForSure, and tried to run it. It looked like it installed just fine, but when I plug in the player, it just recognizes it (at the start) as Creative Zen Touch, and opens up the Found New Hardware wizard. So, I don't think it recognizes my Zen.
This, of course, leads to all the programs not being able to recognize my Zen, either, and to me not being able to reload the firmware (just in case), or anything of the sort. Not really sure how to proceed, and I've been scanning the help files, which have been no help. The knowledge database seems to suggest that Windows XP will just load the proper drivers, which, of course, it doesn't.
How do I proceed? I thought this would be the answer, but it presumes that Windows will detect the device as an MTP, and somehow just find the right driver, which it doesn't.
I'm at a bit of a loss as to where I go from here. The drivers aren't installing, and the closest I can get is my Device Manager showing the Creative Zen with a big yellow question mark next to it, because the drivers aren't installed properly.
Help?

Try downloading and installing the latest drivers, Creative Zen and Jukebox Driver Upgrade version .30.03.
Also try running a disk cleanup from rescue mode.

Bluetooth not being detected on Windows XP SP2 (3000 N200)

Hi,
I removed windows vista that came preinstalled and installed a windows xp sp2. I downloaded the bluetooth drivers for my version ie. 3000 N200 0769 BBG. But the bluetooth is not being detected. The bluetooth LED is always off (Only the WLAN LED is green). I tried to install drivers from broadcom site also. But, installation is not proceeding as it cannot detect any hardware. Bluetooth was working properly on windows vista. So i dont think it is any harware issue.
Any idea what could be the problem? Please help me out with this ...
Thanks & Regards
Ashok

Bluetooth is working 100% perfectly with Win Xp. I think you guys are not installed proper driver, i think this link will help you out..
http://www-307.ibm.com/pc/support/site.wss/TVSU-UPDATE.html#DLP
Best option is better to download System Update 3.14 (16MB) tool in the avobe link and you will get all the proper drivers for your lap. Till now you uanble to slove your problem I will upload the Blooth tooth driver for you. Let me know Waiting for your reply.
Thank you
_Kid_

Audigy 2 ZS not being properly detect

Similar Messages

Maybe you are looking for