Audigy 2 ZS Notebook MIDI playback problem

Hi guys, I have a following problem. I recently obtained PCMCIA SB Audigy 2 ZS Notebook. I'm running it on an older DELL Inspiron 5160, Win XP (latest possible service pack and drivers), P4 3.0GHz, 2 Gigs of RAM (max). Onboard audio SigmaTel is disabled.
I had no problem installing driver from Creative CD, playback and recording works fine. I can even play midi files in Windows Media Player. I knew I had to install drivers from CD in order to be able to use soundfonts, latest drivers do not support that.
There is the only problem - when I try to use the software keyboard in the Bank Manager, where I loaded up my sf2 banks, it does not make a sound. For writing midi songs, I used to use old MidiSession program. I can't hear anything there either. Strange thing is, when I play any midi file in the Widows Media Player - at the exact same time, both things mentioned above work, keyboard or MidiSession. I have no idea why that is. I tried to uninstall and reinstall Creative drivers and software, nothing. Since I can't update to a newer driver, I'm at loss here.
I used to have the same setup on my desktop (except the PCMCIA version) and all worked just fine.
Does anyone has any idea what could be causing this? Thanks.

? A soundfont cannot contain alle drumkits, and it is not nessecary at all. I dont know a soundfont bank wich contains a complete set of drumkits, too. There are only some soundfonts like the crysis soundfont (to big for its "bad" quality) wich have some dummy-drumkits/ entrys or slightly modified sounds for each than usual. If all drumnkits would be stored in high-quality, the soundfont would be huge... Every synth i know uses the standard drumkit, if the chosen one is not existent. This is not optimal, but it will guarantee, that the the MIDI file or Program/ game will work. The KXDrivers wont do this. SO they are not useable for General MIDI. Only for MIDIs and soundfonts fitting together. But thats not the point of General MIDI. CMSS isnt working with these drivers, too. Dolby decoding/ encoding isnt possible with them, either. These drivers are not bad, but if you want a completely working card, KXdrivers are worthless.

Similar Messages

Midi playback problem

Hi,
I am new to logic, maybe it's a very simple problem.
what I want to do is to play back a midi file which I recorded in Ableton Live before.
I recorded it in NO quantization mode in Live, there are some overlapped notes.
the problem in Logic is it sounds totally different !
the note length is wrong, and a lot of my notes are ignored, I searched here and guess maybe it's because the overlapped notes or Logic has some auto snap/quantize function ?
in short, I hope it sounds like what I recorded before, how to turn off all these auto fix things?
thank you for any help !

now the problem is :
I play external midi device, use logic to record them --- ok
after recording, playback the midi directly in logic --- ok
export the midi, import the exported midi, playback --- wrong ! some notes ignored !
the most weird thing is , these two midi looks same , sounds different !
why...

Basic midi playback problems

I am playing with the demo for logic express 7 and having a bit of a problem with playing back midi.
I am inputting from a korg sp 300 through an edirol ua-20 and it records ok but only seems to play back from logic through the korgs speakers. I want to be able to play it back through the main mix to my amp and speakers. audio tracks like vox and guitars are fine.
It must be pretty simple but i just cant find the answer?

The midi tracks are only telling the Korg what to play, so you're going to hear the sound from wherever the Korg's sounds come out. If you want to hear the sounds from the speakers, you'll need to route the audio outputs from the Korg to your amp. There may be a way to do that with your interface; otherwise you may need a mixer. That's the old-school midi way (pre software instruments).

Audigy 2 ZS Notebook and Midi Adapt

I have an Audigy 2 ZS Notebook I want to coonect my Roland JX3P Midi Keyboard that i want to connect to my sound card but the Audigy 2 ZS Notebook doesn't have any midi connections does anybody know of a Creative product or a 3rd party USB device that will allow me to hook up my Roland keyboard to my laptop.
Thanks

? A soundfont cannot contain alle drumkits, and it is not nessecary at all. I dont know a soundfont bank wich contains a complete set of drumkits, too. There are only some soundfonts like the crysis soundfont (to big for its "bad" quality) wich have some dummy-drumkits/ entrys or slightly modified sounds for each than usual. If all drumnkits would be stored in high-quality, the soundfont would be huge... Every synth i know uses the standard drumkit, if the chosen one is not existent. This is not optimal, but it will guarantee, that the the MIDI file or Program/ game will work. The KXDrivers wont do this. SO they are not useable for General MIDI. Only for MIDIs and soundfonts fitting together. But thats not the point of General MIDI. CMSS isnt working with these drivers, too. Dolby decoding/ encoding isnt possible with them, either. These drivers are not bad, but if you want a completely working card, KXdrivers are worthless.

Problems with recording with Audigy 2 ZS Notebook pls pls help????

hi
!!! I am try to fix a record from a dj mixer to my Audigy 2 ZS Notebook...every is set ...from the mixer i am using 3.5 mm strero? 2 st RCA to the Audigy 2 ZS Notebook...but when i click record i donot get any signal in ...i am try to record through line in on the record program. but when i try to record with a anther program" sony" its works ....but not the Audigy 2 ZS record program ...pls help ...
mike

jkeener7 wrote:
Thanks I went ahead and got some Logitech Z5500 speakers.
Hi
Did you not looked "Audigy 2 Zs Notebook's" User's Guide?
jutapa

Audigy 2 zs notebook - no soundfont

# Hi,
I have Windows XP SP2 (also tried SP3 and Windows 7 with the same result).
When I install the original Audigy 2 ZS Notebook CD, soundfont playback (using the Soundfont Bank Manager) has terrible latency, probably 250 mSec or so. After I update drivers and applications using Creative's Autoupdate, I get no soundfont sound at all.
After the update, the Bank Manager showed no soundfonts loaded, so I tried reloading the soundfonts that were originally installed (CT2MGM.SF2, CT4MGM.SF2 and CT8MGM.SF2) - still no sound.
Additionally, I've downloaded Vienna 2.4 and starting it up gives me the error:
Sound font editing capability is currently being used by another application.
Quit the other application and try again.
This is a fresh XP Home installation with SP2 installed.
The the original Audigy CD, then Creative's updates.
help!

? A soundfont cannot contain alle drumkits, and it is not nessecary at all. I dont know a soundfont bank wich contains a complete set of drumkits, too. There are only some soundfonts like the crysis soundfont (to big for its "bad" quality) wich have some dummy-drumkits/ entrys or slightly modified sounds for each than usual. If all drumnkits would be stored in high-quality, the soundfont would be huge... Every synth i know uses the standard drumkit, if the chosen one is not existent. This is not optimal, but it will guarantee, that the the MIDI file or Program/ game will work. The KXDrivers wont do this. SO they are not useable for General MIDI. Only for MIDIs and soundfonts fitting together. But thats not the point of General MIDI. CMSS isnt working with these drivers, too. Dolby decoding/ encoding isnt possible with them, either. These drivers are not bad, but if you want a completely working card, KXdrivers are worthless.

Audigy 2 ZS notebook sound card compatible with Lenovo X6

I have to admit I probably made a mistake for rushing to?EBAY to get a creative Audigy 2 ZS notebook sound card, which?is intended to be used for my Lenovo X6t tablet pc. The problem is I just did some research and found my PCMCIA driver "RICOH R/RL/5C476(II)" is sitting?on their list of incompatibility.
Do anyone have any experience on this matter? It is true it really will not work?
Please help.

mpbojangles wrote:
Simple problem... The soundcard is playing a sound appx. second after the sound is actually supposed to play. When I take out the card, everything is fine. Anyone know the fix? Thanks.
Do you mean you can hear the sound even Audigy is not connected? --> if yes, then just disable the onboard sound (from BIOS or/and device manager).
If you're playing some external instrument (etc.) or from some audio/media player then, it's latency question --> try w/ ASIO (you need to cahnge to the advanced mode) latency set around 0ms or decrease buffer size on playback software.
jutapa

Audigy 2 ZS Notebook- Popping and Beeping probl

Hey all, I installed my Audigy 2 zs notebook card today and it seems to work fine except that when using with any media player (have tried Winamp, WMP, mediasource player), i get a horrible beeping/hissing/popping sound at the beggining of most songs and it has frozen my player a few times. Most of the time if I suffer through it and let it play, the noises will cease even when it moves to the next song on it's own, but if i skip tracks, the noise appears again. I am absolutley positi've it is not an issue with my sound files or player programs, as they have all worked perfectly in the past. this is kind of an odd problem and i'm just wondering if anyone has had a similar experience. Thanks.

? A soundfont cannot contain alle drumkits, and it is not nessecary at all. I dont know a soundfont bank wich contains a complete set of drumkits, too. There are only some soundfonts like the crysis soundfont (to big for its "bad" quality) wich have some dummy-drumkits/ entrys or slightly modified sounds for each than usual. If all drumnkits would be stored in high-quality, the soundfont would be huge... Every synth i know uses the standard drumkit, if the chosen one is not existent. This is not optimal, but it will guarantee, that the the MIDI file or Program/ game will work. The KXDrivers wont do this. SO they are not useable for General MIDI. Only for MIDIs and soundfonts fitting together. But thats not the point of General MIDI. CMSS isnt working with these drivers, too. Dolby decoding/ encoding isnt possible with them, either. These drivers are not bad, but if you want a completely working card, KXdrivers are worthless.

Audigy 2 ZS Notebook/ Creative Soundfont Synth

.Audigy 2 ZS Notebook/ Creative Soundfont Synth; Hi there, if have a problem with this card. I solved it in some way, but maybe someone has got a hint for me. The problem: Creative Soundfont Synth only works with the original driver cd installation. The only working driver update, wich leaves the Creative soundfont Synth functional, ist the one available via Windows Update (Windows XP). If im using autoupdate from creative, and a newer driver like the 2_0_06 or the 2_8_00 is installed, the creative soundfont synth is dead. No way to get it to work. (DXDIAG shows errormessages while testing, Synth cannot be initialised) I reinstalled the driver manually, i tryed to uninstall it, so many options i've tryed: no way! So i gave up, and now im staying with the latest drivers from windows update. The card is working fine, so its Ok for now. Is there someone else with the same problem? Question: Do someone know why the hardware synth on this card is disabled? Why is this sofware synth necessary? The card is a EMU0K2, so it has the Hardware Synth available theoeretically. This Software Synth- Installation is a [email protected]

? A soundfont cannot contain alle drumkits, and it is not nessecary at all. I dont know a soundfont bank wich contains a complete set of drumkits, too. There are only some soundfonts like the crysis soundfont (to big for its "bad" quality) wich have some dummy-drumkits/ entrys or slightly modified sounds for each than usual. If all drumnkits would be stored in high-quality, the soundfont would be huge... Every synth i know uses the standard drumkit, if the chosen one is not existent. This is not optimal, but it will guarantee, that the the MIDI file or Program/ game will work. The KXDrivers wont do this. SO they are not useable for General MIDI. Only for MIDIs and soundfonts fitting together. But thats not the point of General MIDI. CMSS isnt working with these drivers, too. Dolby decoding/ encoding isnt possible with them, either. These drivers are not bad, but if you want a completely working card, KXdrivers are worthless.

SB Xtreme Audio Notebook optical out problem with Home TheaterSystem-HELP!

JSB Xtreme Audio Notebook optical out problem with Home TheaterSystem-HELP!, I have this sound card connected?(optical OUT) ?to my home?theater system's digital IN ?through the recommended /8in. optical miniplug-to-optical SPDIF cable. Theater system is set correctly to Digital-In mode. I have no sound!
The cable is a Velocity Toslink-to-Optical Mini Plug digital cable. I don't see any settings in the Creative Console Launcher. The notebook is a Dell XPS M730 (Vista 32).
I have a PS3, DirecTV, and the SB Xtreme Audio Notebook cable on a hub switch that connects to the system's?one Optical IN. The PS3 and DirecTV sound perfect!
The sound card works fine with standard PC speakers. I'm at a loss as?to what to try next. I set this whole system up myself, so I'm pretty good at working out the kinks, except this one!
Karen

OK. I just went to Control Panel - Sound - Playback - Digital Output Device (SB Xtreme Audio Notebook) - Properties - Advanced. I experimented with different sample rates and bit depths. Clicked the test button and lo and behold - sound from the HTS! I've tried iTunes, PowerDVD (configured to digital output) and YouTube - no sound! Am I missing something really obvious?
HA! Just backed out to Playback and selected Digital Output Device (SPDIF) and set as Default. Sound is emunating from HTS! Well, that mystery is solved! Who knew.
Thanks anyway! Any comments or advice will still be appreciated.

Audigy 2 Z2 Notebook PCMCIA Card cannot install Creative Mediasource 5

. Every time I try and install CMS5 on the Audigy 2 Z2 Notebook PCMCIA Card, I keep getting this ERROR:
[color="#ff0000"]DoInstall Fails to Launch C:\Windows\CRF002\CTXInst\Setup.inx DoInstall return error code is - 2472332
here is the file name of the install: CMS5-BRNR_PCAPP_LB_5_0_44.exe
I have re-installed, all creative drivers, I even clean installed them, and i still get this error, any ideas?
EDIT: I fixed the problem, you have to install the older CMS5 before the latest new driver will work............well duh!
Message Edited by denb45 on 0-8-2009 06:5 [email protected]

Thank you for the reply split0,
as for the informati've post, thank you for the compliment, i tend to not open a thread at all unless i have spent enough time on the problem and searched around enough for solutions, and after that i only post if it has enough info regarding everything in inside the thread.
In regard to the known incompatibility list, unfortunatly this is one of the things i checked beforehand already.
The PCMCIA adapter in my laptop is a Texas Instruments PCI-8x2/7x2/6x2 CardBus-controller.
Which is one of the most common controllers and should normally not cause any troubles at all, also in another thread on this forum i found a differant driver for it, i even tried that with no result sadly.
At the moment personally i am thinking the whole problem lies within not being able to uninstall the onboard sound card to full extent somehow, and while i posted here i also have all this info in a direct message sent to creative, and even acer for that matter.
In hopes of some kind of solution for this so i can keep my hopes up for not having to return the card itself.
What bugs me is that there is option at all to disable the onboard sound through the bios.
Because right now whenever i install the ZS notebook card it checks hardware for the onboard first installing it again, then setting priority for the zs notebook.
This is what seems to result in the crashes through a conflict in drivers in my idea, but thats just a hunch which i cant do anything about currently in regard to testing unless someone has an idea for me to try.
Message Edited by Natharneal on 05-23-2008 0:54 PM

HELP! Audigy 2 ZS Notebook used with Vista and can't reco

I just installed my Audigy 2 ZS Notebook PCMCIA card and cannot figure out how to record in both Adobe Audition .5 and Sony Acid 6.0b.
The info I'm missing is:
) Which device to set as the "default" in the Windows Vista "Recording Devices" area.
2) What "Audio Device" to use as well as the "Default Audio Recording Device" in Sony Acid 6.0b.
3) The "Recording Device Order" and the "Wave In Device Properties" for Adobe Audition .5
Any help would be greatly appreciated as I'm a musician and really need to get recording.
Thank you!

I
The result of the last install: Crashed with blue screen, Two lines are in the messages, that are not part of the explanation, on how to fix the problem:
(I took a photo, but my just missed, so all the text is washed, but readable: The unrecognised letter replaced with ?)
I?Q?_NOT_LESS_OR_EQUAL
(Propably IRQA or IRQE)
Thecnical Information:
*** STOP: 0x0000000A (0x00000000, 0x00000002, 0x0000000, 0x82C6870F)
Source:?? Microsoft-Windows-WER-SystemErrorReporting
D?tum:?? 2009.09.26. :54:43
Event ID:00
Description:
Tells that the action was the code, that I was wrote above, and the report id is 092609-33992-0.
Event in XML:
<Event xmlns="<a rel="nofollow" href="http://schemas.microsoft.com/win/2004/08/events/event"]http://schemas.microsoft.com/win/2004/08/events/event[/url]">
? <System>
? rovider Name="Microsoft-Windows-WER-SystemErrorReporting" Guid="{ABCE23E7-DE45-4366-863-84FA6C525952}" EventSourceName="BugCheck" />
? <EventID Qualifiers="6384">00</EventID>
? <Version>0</Version>
? <Level>2</Level>
? <Task>0</Task>
? <Opcode>0</Opcode>
? <Keywords>0x80000000000000</Keywords>
? <TimeCreated SystemTime="2009-09-26T09:54:43.000000000Z" />
? <EventRecordID>6322</EventRecordID>
? <Correlation />
? <Execution ProcessID="0" ThreadID="0" />
? <Channel>System</Channel>
? <Computer>XXX</Computer>
? <Security />
? </System>
? <EventData>
? <Data Name="param">0x0000000a (0x00000000, 0x00000002, 0x0000000, 0x82c6870f)</Data>
? <Data Name="param2">C:\Windows\MEMORY.DMP</Data>
? <Data Name="param3">092609-33992-0</Data>
? </EventData>
</Event>
After restart, the bios test freezez in the final frazes, and force shutdown and restart, functions well again. The sound card is in while booting.
No driver confilcts.
I've uploaded the dmp file here: <a rel="nofollow" href="http://pantonite.extra.hu/bin/MEMORY.DMP"]http://pantonite.extra.hu/bin/MEMORY.DMP[/url]

Audigy 2 ZS Notebook Synthesizer not instal

I've just installed the SoundBlaster Audigy 2 Notebook soundsard, into my Fujitsu AMILO PRO V3525 notebook with Windows Vista Home Premium. It caused a little problem to me, with the WiFi network card and modem driver, but I've fixed it.
I have just figured out, that the Synthesizer is not installed properly, and any time I want to install it, the device manager crash, or it say somthing that the extension atribute not maches. I can't even remove the driver, 'cause windows device manager imediatly crashes.
I have already tried to update, but it had no affect on Synthesizer.
I had installed a deviced called unsupported game port driver from Microsoft, wich made it possible, to uninstall the driver. (I think it was not pernament.) What should I do, how can it be fixed

jkeener7 wrote:
Thanks I went ahead and got some Logitech Z5500 speakers.
Hi
Did you not looked "Audigy 2 Zs Notebook's" User's Guide?
jutapa

Audigy 2 ZS Notebook - Will this be Vista compatible?

Hi all, just popping in to ask a quick question. This is not a flame, nor is it meant to be anything other then a sincere question. Will the Creative Labs Audigy 2 ZS Notebook PCMCIA sound card be Vista compatible at some point?No need to tell me the date it's due or anything like that. Just wondering if, when Creative Labs releases their final Vista drivers, the ZS notebook sound card will be included in the list of supported cards.
Thanks.

ctorres wrote:
Ok it works, but you only get 2.1 instead of 7.1 ..... i hop creative guys hurry up because even the latest version of the drivers for vista doesn t work.
It isn't a driver problem, but your system/configuration! Make sure you have enabled the "CMSS" option in the CMSS-3D tab, if you have 7.1 speakers. Also make sure, you select 7.1 speakers in both AudioConsole and the Windows Sound/Multimedia properties. Microsoft does not allow for these changes to be made by an external program (like in Windows XP). You can also use Windows' built-in mixer to check the individual volumes of each speaker, like you did with Surround Mixer in XP.

Audigy 2 ZS Notebook with DTT3500 Digital

Hi
Sorry my very bad english, but i'm from Switzerland...
I have a problem. How can i use my Audigy 2 ZS Notebook with my DTT3500 Digital? SPDIF works with the optical cable. I want to use the decoder in the Soundcard, but the DTT 3500 has just green and black. But not orange, for center an subwoofer...
Is there a way to use this? With a special cable or something like that?
Thanks a lot, Rumblejack

Rumblejack,
Unfortunately the Audigy 2 ZS Notebook doesn't have a DIN on it which was the only way that the DTT3500 supported 5. outside of DVD passthrough over an optical or RCA connection. This means that to use the decoder on the card you will need a different set of speakers, as the DTT3500 speakers were designed with a different set of cards in mind.
If you decide to replace your speakers you might look at the Inspire T-5400, although they are less expensi've, they are actually more powerful speakers that the DTT3500s. They don't have a decoder (not needed since most of our cards now have built in decoders) so the price on them is much lower.
Jeremy

Audigy 2 ZS Notebook MIDI playback problem

Similar Messages

Maybe you are looking for