Audigy 2 zs notebook vs. creative live 5.1 exter

Hello, I am currently thinking about upgrading my sound card and before I spend the money, I was wondering if anyone could help me. I currently have a soundblaster li've 5. external hooked up to a yamaha receiver optically. I was wondering if getting the Audigy 2 zs notebook(because it is hooked up to my laptop) would make a major difference in sound quality. I am only using klipsch speakers, and plan on adding to my collection. Thanks in advanced. Alex

Similar Messages

Audigy 2 Z2 Notebook PCMCIA Card cannot install Creative Mediasource 5

. Every time I try and install CMS5 on the Audigy 2 Z2 Notebook PCMCIA Card, I keep getting this ERROR:
[color="#ff0000"]DoInstall Fails to Launch C:\Windows\CRF002\CTXInst\Setup.inx DoInstall return error code is - 2472332
here is the file name of the install: CMS5-BRNR_PCAPP_LB_5_0_44.exe
I have re-installed, all creative drivers, I even clean installed them, and i still get this error, any ideas?
EDIT: I fixed the problem, you have to install the older CMS5 before the latest new driver will work............well duh!
Message Edited by denb45 on 0-8-2009 06:5 [email protected]

Thank you for the reply split0,
as for the informati've post, thank you for the compliment, i tend to not open a thread at all unless i have spent enough time on the problem and searched around enough for solutions, and after that i only post if it has enough info regarding everything in inside the thread.
In regard to the known incompatibility list, unfortunatly this is one of the things i checked beforehand already.
The PCMCIA adapter in my laptop is a Texas Instruments PCI-8x2/7x2/6x2 CardBus-controller.
Which is one of the most common controllers and should normally not cause any troubles at all, also in another thread on this forum i found a differant driver for it, i even tried that with no result sadly.
At the moment personally i am thinking the whole problem lies within not being able to uninstall the onboard sound card to full extent somehow, and while i posted here i also have all this info in a direct message sent to creative, and even acer for that matter.
In hopes of some kind of solution for this so i can keep my hopes up for not having to return the card itself.
What bugs me is that there is option at all to disable the onboard sound through the bios.
Because right now whenever i install the ZS notebook card it checks hardware for the onboard first installing it again, then setting priority for the zs notebook.
This is what seems to result in the crashes through a conflict in drivers in my idea, but thats just a hunch which i cant do anything about currently in regard to testing unless someone has an idea for me to try.
Message Edited by Natharneal on 05-23-2008 0:54 PM

Compatibility with Creative Live Ultra (notebooks)

I run a HP Pavilion ze2000, will I be able to use the Creative Live Ultra without problems like on the TOshiba Sattelite notebooks? I have usb 2 port and I surpase/meet all recommended requirements.

hi bro try webcamXP its better, try it out! take a look @ my website and see the webcamXP @ work,http://www.gibconnect.com/~gibraltarldm/ldmcam.html :smileyvery-happy:

Audigy 2 ZS Notebook PCMCIA will not give me 6-channel 5.1 with my Creative DTT2500 Speakers!

I have this (Creative DTT2500 5. Speaker system) Amplifier/Decoder Box:
<IMG src="http://www.gdhardware.com/images/rev_graphics/rev_graphics2/control_box_back.jpg">
Audigy 2 ZS PCMCIA has these connections:
<IMG src="http://asia.cnet.com/i/r/2004/nb/3997856/sc002.jpg">
How do I get it to work with this to allow me to get 5. Surround Sound?!?!?
I am baffled: So far I can only get line out to work, but only 2 speakers at a time. Rear out does nothing!
Please help me, as I want to make sure I am not an idiot before I am forced to buy a Logitech Z 5500 speakers!!!
<SPAN class=time_text>
Message Edited by jkeener7 on 0-04-2006 08:08 PM

jkeener7 wrote:
Thanks I went ahead and got some Logitech Z5500 speakers.
Hi
Did you not looked "Audigy 2 Zs Notebook's" User's Guide?
jutapa

Audigy 2 ZS Notebook/ Creative Soundfont Synth

.Audigy 2 ZS Notebook/ Creative Soundfont Synth; Hi there, if have a problem with this card. I solved it in some way, but maybe someone has got a hint for me. The problem: Creative Soundfont Synth only works with the original driver cd installation. The only working driver update, wich leaves the Creative soundfont Synth functional, ist the one available via Windows Update (Windows XP). If im using autoupdate from creative, and a newer driver like the 2_0_06 or the 2_8_00 is installed, the creative soundfont synth is dead. No way to get it to work. (DXDIAG shows errormessages while testing, Synth cannot be initialised) I reinstalled the driver manually, i tryed to uninstall it, so many options i've tryed: no way! So i gave up, and now im staying with the latest drivers from windows update. The card is working fine, so its Ok for now. Is there someone else with the same problem? Question: Do someone know why the hardware synth on this card is disabled? Why is this sofware synth necessary? The card is a EMU0K2, so it has the Hardware Synth available theoeretically. This Software Synth- Installation is a [email protected]

? A soundfont cannot contain alle drumkits, and it is not nessecary at all. I dont know a soundfont bank wich contains a complete set of drumkits, too. There are only some soundfonts like the crysis soundfont (to big for its "bad" quality) wich have some dummy-drumkits/ entrys or slightly modified sounds for each than usual. If all drumnkits would be stored in high-quality, the soundfont would be huge... Every synth i know uses the standard drumkit, if the chosen one is not existent. This is not optimal, but it will guarantee, that the the MIDI file or Program/ game will work. The KXDrivers wont do this. SO they are not useable for General MIDI. Only for MIDIs and soundfonts fitting together. But thats not the point of General MIDI. CMSS isnt working with these drivers, too. Dolby decoding/ encoding isnt possible with them, either. These drivers are not bad, but if you want a completely working card, KXdrivers are worthless.

Creative Audigy 2 ZS Notebook install probl

Lets start off with the system owned:
Acer Aspire 9920G, Windows Vista Home Premium x86 32bit, Intel Core 2 Duo processor T7500 (2.2GHz/FSB: 800MHz/4MB L2 cache), 4GB DDR II RAM (2x 2GB), 2x 250GB (5400rpm S-ATA), NVIDIA GeForce 8600M-GT 280MB TC.
With a realtek onboard HD soundcard.
Now here's the problem:
I purchased the Creative Audigy 2 ZS Notebook last monday, went home and read the instructions.
I made sure to disable and uninstall the onboard card before hand and then pushed the card into the PCMCIA slot and press cancel on the automatic driver search vista gives me, afterwards starting the installation of the vista drivers that i downloaded seeing a small sticker on the box notified me that the installation cd would only work on XP.
Mind you, this is on a clean install, i reinstalled the whole system in the weekend and made a full backup that can be put back in less then 40 minutes in case something would go wrong.
Anyway, next thing i know after starting the install the system freezes entirely at the point where the installation says: "Updating windows drivers".
Hard reboot is the following action ofcourse, system freezes up and refuses to boot only giving me all the nifty blue lights and a black screen.
I pull out the zs notebook and reboot, works fine, however the second i push in the zs notebook the whole system freezes and i have to pull the plug yet again to force it to reboot.
Only action left is putting the backup back and everything works fine again and now i can actually push in the zs notebook card again without the system crashing.
I have tried multiple things after that reinstall so far with multiple results:
- Installing the drivers listed for vista in the drivers section: install freezes, have to reset by cutting the power, but i can reboot with the card still in the laptop, however its not installed at all nor are any programs installed.
- Installing with daniel's drivers: install freezes, cut power to reset and laptop refuses to boot with the zs notebook card in the slot and when in windows the card is pushed in the laptop freezes up yet again.
- Installing either of both drivers in safe mode results in a normal correct install: no freezing or crashing however the second i boot up in normal mode the laptop freezes before loading windows and the power has to be cut yet again.
So far every time this is fixed by using the recovery backup i made to have everything to normal again.
Probable cause that i was able to find:
If i install in safe mode the onboard sound card doesnt get loaded at all, then the installation of the zs notebook runs correctly.
However, in normal mode even if i disable and uninstall the drivers for the onboard card when the install runs it triesto install both the "Creative Audigy Audio Processor (WDM)" drivers for the audigy zs notebook, but it also tries to reinstall the realtek onboard, and i have no clue how to get rid of that since there is no option to disable the onboard soundcard through the bios at all.
Either way, the only time the laptop actually freezes is when the "Creative Audigy Audio Processor (WDM)" gets installed.
If that process doesnt manage to install itself the system doesnt crash, but doesnt see the ZS notebook card either.
Any ideas of random throughts that might help me solve this problem
Also, sorry for the long post, but i tried to make everything as complete and detailed as possible because i really want this fixed seeing i own both an older 5. creative sound set and a logitech z5500 with THX and would like to be able to run both on my laptop when i am at home.
Either way if i end up not being able to fix this i might end up swapping in the audigy 2 zs notebook for the x-fi xtreme audio notebook, problem there is though that it does not have THX and that i'll aslo have to seperatly buy the docking cable.
With regards,
Natharneal.
Message Edited by Natharneal on 05-23-2008 07:35 PM

Thank you for the reply split0,
as for the informati've post, thank you for the compliment, i tend to not open a thread at all unless i have spent enough time on the problem and searched around enough for solutions, and after that i only post if it has enough info regarding everything in inside the thread.
In regard to the known incompatibility list, unfortunatly this is one of the things i checked beforehand already.
The PCMCIA adapter in my laptop is a Texas Instruments PCI-8x2/7x2/6x2 CardBus-controller.
Which is one of the most common controllers and should normally not cause any troubles at all, also in another thread on this forum i found a differant driver for it, i even tried that with no result sadly.
At the moment personally i am thinking the whole problem lies within not being able to uninstall the onboard sound card to full extent somehow, and while i posted here i also have all this info in a direct message sent to creative, and even acer for that matter.
In hopes of some kind of solution for this so i can keep my hopes up for not having to return the card itself.
What bugs me is that there is option at all to disable the onboard sound through the bios.
Because right now whenever i install the ZS notebook card it checks hardware for the onboard first installing it again, then setting priority for the zs notebook.
This is what seems to result in the crashes through a conflict in drivers in my idea, but thats just a hunch which i cant do anything about currently in regard to testing unless someone has an idea for me to try.
Message Edited by Natharneal on 05-23-2008 0:54 PM

Connecting PCMCIA Sound Blaster Audigy 2 ZS Notebook to Onkyo HT-S580 Recei

Hi
I have PCMCIA Sound Blaster Audigy 2 ZS Notebook audio card with my Thinkpad laptop.
I have bought Onkyo HT- S580 Hometheater system. I was hoping to connect the Line out, Line out2, Line out3 jacks to the receiver's Front, Surround(rear) and Center in jacks.
The color on the Onkyo Recei'ver end are Center - Green , Surround(rear) - Blue , Front - White
The color on the Creative Card end are Center- Orange , rear - Black , Front - Green
There is color difference between these two ends . Is it advisable to connect these two jacks ?
Please recommend the suitable cable type and name for this connection
Thanks

dilip wrote:
Hi I have PCMCIA Sound Blaster Audigy 2 ZS Notebook audio card with my Thinkpad laptop. I have bought Onkyo HT- S580 Hometheater system. I was hoping to connect the Line out, Line out2, Line out3 jacks to the receiver's Front, Surround(rear) and Center in jacks. The color on the Onkyo Recei'ver end are Center - Green , Surround(rear) - Blue , Front - White The color on the Creative Card end are Center- Orange , rear - Black , Front - Green There is color difference between these two ends . Is it advisable to connect these two jacks ? Please recommend the suitable cable type and name for this connection Thanks
Hi
Colours may vary --> just connect by the instructions from both manuals.
There are good explanations for
- Stereo and 4-Pole Jack Diagrams
- Connecting a multichannel home theater receiver
- cabletypes needed on connections
on User's Guide.
NOTE: This User's Guide can be found on your driver CD too.
Also, here is the Onkyo HT-S580 manual.
jutapaMessage Edited by jutapa on 0-0-2006 03:32 AM

USB 2.0 Problem when installing Creative Live Motion Webcam

I currently have a Compaq desktop PC running Windows XP SP2 with all the latest Microsoft patches. However, when I try to install the Creative Live Motion drivers, it warns me that the software components required to support USB 2.0 are not installed.
As a result the Webcam will not function when plugged in directly to the USB 2.0 ports in the PC (either at the back or the front of the PC).
However, if a plug in the Webcam via a USB 4 port Hub (running at USB .) it then works okay.
Can any one please advise how I am suposed to upgrade the software on my PC to convince it to support USB 2.0 attached devices and why does the Webcam not function under certain conditions. Note that I have tried various BIOS configurations regarding its ability to support legacy USB - both Auto and Disabled.
Thanking you in advance.

I found answer for my problem from knowledge base, Solution ID # 7557.
"Creative WebCam Live! Ultra, WebCam Live! Ultra for notebooks and Live! Motion may be incompatible with some ATI southbridge SB400 and SB450 products."
And I have SB400...

Audigy 2 ZS Notebook - Will this be Vista compatible?

Hi all, just popping in to ask a quick question. This is not a flame, nor is it meant to be anything other then a sincere question. Will the Creative Labs Audigy 2 ZS Notebook PCMCIA sound card be Vista compatible at some point?No need to tell me the date it's due or anything like that. Just wondering if, when Creative Labs releases their final Vista drivers, the ZS notebook sound card will be included in the list of supported cards.
Thanks.

ctorres wrote:
Ok it works, but you only get 2.1 instead of 7.1 ..... i hop creative guys hurry up because even the latest version of the drivers for vista doesn t work.
It isn't a driver problem, but your system/configuration! Make sure you have enabled the "CMSS" option in the CMSS-3D tab, if you have 7.1 speakers. Also make sure, you select 7.1 speakers in both AudioConsole and the Windows Sound/Multimedia properties. Microsoft does not allow for these changes to be made by an external program (like in Windows XP). You can also use Windows' built-in mixer to check the individual volumes of each speaker, like you did with Surround Mixer in XP.

Audigy 2 zs notebook - no soundfont

# Hi,
I have Windows XP SP2 (also tried SP3 and Windows 7 with the same result).
When I install the original Audigy 2 ZS Notebook CD, soundfont playback (using the Soundfont Bank Manager) has terrible latency, probably 250 mSec or so. After I update drivers and applications using Creative's Autoupdate, I get no soundfont sound at all.
After the update, the Bank Manager showed no soundfonts loaded, so I tried reloading the soundfonts that were originally installed (CT2MGM.SF2, CT4MGM.SF2 and CT8MGM.SF2) - still no sound.
Additionally, I've downloaded Vienna 2.4 and starting it up gives me the error:
Sound font editing capability is currently being used by another application.
Quit the other application and try again.
This is a fresh XP Home installation with SP2 installed.
The the original Audigy CD, then Creative's updates.
help!

? A soundfont cannot contain alle drumkits, and it is not nessecary at all. I dont know a soundfont bank wich contains a complete set of drumkits, too. There are only some soundfonts like the crysis soundfont (to big for its "bad" quality) wich have some dummy-drumkits/ entrys or slightly modified sounds for each than usual. If all drumnkits would be stored in high-quality, the soundfont would be huge... Every synth i know uses the standard drumkit, if the chosen one is not existent. This is not optimal, but it will guarantee, that the the MIDI file or Program/ game will work. The KXDrivers wont do this. SO they are not useable for General MIDI. Only for MIDIs and soundfonts fitting together. But thats not the point of General MIDI. CMSS isnt working with these drivers, too. Dolby decoding/ encoding isnt possible with them, either. These drivers are not bad, but if you want a completely working card, KXdrivers are worthless.

Audigy 2 ZS Notebook Iss

Hello, I recently purchased a Dell XPS Gen 2 system and with it I received my Audigy 2 ZS Notebook card. Upon arrival I opened up the package and installed the card and all the accompanying software and when I started up a game (Battlefield 2 to be exact) I found out that I had no sound. Figuring that it was a dilemma with my sound I turned up the volume to no avail, worked around in the BF2 options with no luck, and then headed to your website.
I have run the card's diagnostic program and I tell the system that it was a 2/2. speaker setting but when running the diagnostic I hear no sound during the speaker test. I went to control panel > Sounds and Audio Devices and set my speakers to a laptop stereo system rather then a desktop stereos system but I still lack sound. Also, I've repeatedly tried removing and putting the card back in yet I lack sound. Know that the default sound card is currently this one and I still have these issues. Please help!

Try this. What i suspect the problem to be is the failure of the "CTAPR.exe" application to start at the same time as the other startup applications.
To rectify this problem, create a shortcut to the below path on your desktop:
"C:\Program Files\Creative\Sound Blaster Audigy 2\Feature Mode Utility\CTAPR.exe"
and then move it into the "startup" folder of your start menu. You may well need to first of all try opening the application manually from the shortcut, and enabling "advanced features mode". You will also be given the opportunity to test the notebook speakers.
Obviously this is only guesswork on my part: if this is to no avail, my apologies for wasting your time!

Audigy 2 ZS notebook sound card compatible with Lenovo X6

I have to admit I probably made a mistake for rushing to?EBAY to get a creative Audigy 2 ZS notebook sound card, which?is intended to be used for my Lenovo X6t tablet pc. The problem is I just did some research and found my PCMCIA driver "RICOH R/RL/5C476(II)" is sitting?on their list of incompatibility.
Do anyone have any experience on this matter? It is true it really will not work?
Please help.

mpbojangles wrote:
Simple problem... The soundcard is playing a sound appx. second after the sound is actually supposed to play. When I take out the card, everything is fine. Anyone know the fix? Thanks.
Do you mean you can hear the sound even Audigy is not connected? --> if yes, then just disable the onboard sound (from BIOS or/and device manager).
If you're playing some external instrument (etc.) or from some audio/media player then, it's latency question --> try w/ ASIO (you need to cahnge to the advanced mode) latency set around 0ms or decrease buffer size on playback software.
jutapa

Audigy 2 ZS Notebook MIDI playback problem

Hi guys, I have a following problem. I recently obtained PCMCIA SB Audigy 2 ZS Notebook. I'm running it on an older DELL Inspiron 5160, Win XP (latest possible service pack and drivers), P4 3.0GHz, 2 Gigs of RAM (max). Onboard audio SigmaTel is disabled.
I had no problem installing driver from Creative CD, playback and recording works fine. I can even play midi files in Windows Media Player. I knew I had to install drivers from CD in order to be able to use soundfonts, latest drivers do not support that.
There is the only problem - when I try to use the software keyboard in the Bank Manager, where I loaded up my sf2 banks, it does not make a sound. For writing midi songs, I used to use old MidiSession program. I can't hear anything there either. Strange thing is, when I play any midi file in the Widows Media Player - at the exact same time, both things mentioned above work, keyboard or MidiSession. I have no idea why that is. I tried to uninstall and reinstall Creative drivers and software, nothing. Since I can't update to a newer driver, I'm at loss here.
I used to have the same setup on my desktop (except the PCMCIA version) and all worked just fine.
Does anyone has any idea what could be causing this? Thanks.

? A soundfont cannot contain alle drumkits, and it is not nessecary at all. I dont know a soundfont bank wich contains a complete set of drumkits, too. There are only some soundfonts like the crysis soundfont (to big for its "bad" quality) wich have some dummy-drumkits/ entrys or slightly modified sounds for each than usual. If all drumnkits would be stored in high-quality, the soundfont would be huge... Every synth i know uses the standard drumkit, if the chosen one is not existent. This is not optimal, but it will guarantee, that the the MIDI file or Program/ game will work. The KXDrivers wont do this. SO they are not useable for General MIDI. Only for MIDIs and soundfonts fitting together. But thats not the point of General MIDI. CMSS isnt working with these drivers, too. Dolby decoding/ encoding isnt possible with them, either. These drivers are not bad, but if you want a completely working card, KXdrivers are worthless.

Audigy 2 ZS Notebook and Midi Adapt

I have an Audigy 2 ZS Notebook I want to coonect my Roland JX3P Midi Keyboard that i want to connect to my sound card but the Audigy 2 ZS Notebook doesn't have any midi connections does anybody know of a Creative product or a 3rd party USB device that will allow me to hook up my Roland keyboard to my laptop.
Thanks

? A soundfont cannot contain alle drumkits, and it is not nessecary at all. I dont know a soundfont bank wich contains a complete set of drumkits, too. There are only some soundfonts like the crysis soundfont (to big for its "bad" quality) wich have some dummy-drumkits/ entrys or slightly modified sounds for each than usual. If all drumnkits would be stored in high-quality, the soundfont would be huge... Every synth i know uses the standard drumkit, if the chosen one is not existent. This is not optimal, but it will guarantee, that the the MIDI file or Program/ game will work. The KXDrivers wont do this. SO they are not useable for General MIDI. Only for MIDIs and soundfonts fitting together. But thats not the point of General MIDI. CMSS isnt working with these drivers, too. Dolby decoding/ encoding isnt possible with them, either. These drivers are not bad, but if you want a completely working card, KXdrivers are worthless.

PCWorks fourPointsSorround vs. Audigy 2 ZS Notebook?

Dear Experts, I do have "PCWorks fourPointsSorround" speaker system which is kind of old speaker. And now I would like to buy USB or PCMCIA type of external creative sound card that can be used with my high-end laptop computer. I browse through the creative site and seen their product line items such as "Audigy 2 ZS Notebook" PCMCIA sound card; but I am not sure whether this type of card can still be used with my speaker stystem mentioned above. Your advice would be highly appreciated. Sincerely,Sothun

Dear Jason, Many thanks for your prompted reply. Your advice has helped me in making decision to buy one. However, I have observed that the Audigy 2 ZS Notebooks has two output interfaces (via its demo web site). There are two male connectors?come from PCWorks Four-Point Surround Sound FPS1000 sub-woofer to be pluged in to soundcard. One connector labeled as F (assuming Front) and the other connector labeled as R (assuming Rear). Wondering if the two female connectors of Audigy 2 ZS Notebooks designed to accommodate that. Thank for your next advice. Sincerely Sothun

Audigy 2 zs notebook vs. creative live 5.1 exter

Similar Messages

Maybe you are looking for