Audigy 2 zs output mixing program needed to reduce overpowered rear speakers

To neutralize the strong rear sounds on my usb card i simply reduced the rear output in my output mixer. for some reason my audigy 2 zs doesnt have output mixer software, at least the downloads section of the creative?site doesnt supply it with the rest of the software. if the audigy 2 has mixer software that allows me to set the output of each channel, can some one tell me how to get it's i dont have access to my original cd.

skyd7 wrote:
To neutralize the strong rear sounds on my usb card i simply reduced the rear output in my output mixer. for some reason my audigy 2 zs doesnt have output mixer software, at least the downloads section of the creative site doesnt supply it with the rest of the software. if the audigy 2 has mixer software that allows me to set the output of each channel, can some one tell me how to get it's i dont have access to my original cd.
You mean THX console? It's the only software bundled with A2Zs that lets you control output level (and spkr position) for every channel separately. No other software for this job available by the creative. THX console must be installed from original installation CD. You can find a download link for an ISO CD (original) by searching this forum after BadBoy posts.
jutapa

Similar Messages

Need to reduce to four speakers with T7900

I have the T7900 speaker system and due to lack of desk space I would like to reduce to just:
Centre
Sub-Woofer
Left
Right
Can I do this without losing sound quality? If so, what settings should I use in the Volume Panel?
I would be very grateful for any help, advice, etc.
Many thanks.

You will only get sound out of all your speakers when you:
Play a movie/game that is encoded with dolby digital surround sound.<
Enable the CMSS feature on your Creative sound card. <

Muffled audio from rear speakers using Audigy Gamer

I just upgraded my mobo to the asrock 939Dual-SATA2, and was using the 7. onboard audio until the buzzing/humming everytime I moved the mouse finally got to me. I also missed being able to skew the sound slightly to my rear speakers.
I finally decided to reinstall my Audigy Gamer. I was very disappointed to discover the rear speakers playing awfully. The music is very muffled and nothing like the front speakers.
Before I upgraded my mobo these monsoon 5. speakers played great with the audigy gamer. They also played great with the 7. onboard audio.
Can anyone help me?

Read through this lot and see how you go.
P
http://forums.creative.com/creativel...ssage.id=46767
P2
http://forums.creative.com/creativel...ssage.id=46768
P3
http://forums.creative.com/creativel...ssage.id=46769

Need a basic surround mixing program

i need a basic surround mixing program. i need help FAST....thanks

the most basic is in included in compressor.
go to File Menu . . Import Surround Sound Group. and pick a different file for each spearker,
then choose Dolby 5.1 as the setting (in the audio formats folder)
haven't used it so good luck!

How do I output the program monitor from Premiere Elements 13 to an external TV monitor?

I can find information about dual monitor set ups, but is it possible to output the program monitor only to an external monitor?
If so, what is needed?
I'm using PE`3 on a PC with Windows 7 64 bit with an NVIDIA Quadro NVS 290.
Thanks

bobj
Have not found a way, but....
Do you have a HDMI cable and does your computer and TV each have a HDMI port.
The TImeline panel appears to be the only undockable panel in the Premiere Elements 13/13.1 Expert workspace area (Window Menu/Dual Monitor)
The best I can do is to make a HDMI connection between the HDMI ports of my computer and TV, with display at Duplicate or Extend. That does not appear to be what you seek.
The other part of all this is that Premiere Elements used to have a "Playback Settings" in Project Settings and accessed from
right clicking the Edit area monitor. That is no longer to be found in 13.1, even in a grayed out state. And, for me, the Playback Settings could not be made visible
when attaching a 3rd party device.
In the days of Premiere Elements 11, the answer to your question might have been as described in the following
Adobe Premiere Elements 11 * Previewing movies
Until proven otherwise, I am thinking that it cannot be done in Premiere Elements 13/13.1. But, I am not at a stage where I would put a never and always stamp on this.
ATR

Audigy 2 SPDIF output - again, asking for any help.

Some time ago I asked question about my Audigy 2:
[size="">Hi, I am using Audigy 2 soundcard connected to Altec Lansing ADA885 speakers. These speakers have built-in Dolby Digital Decoder, and of course SPDIF input for this. Additionally, they have inputs for analog front and rear speakers signal. They can be switched to different operation modes : Dolby Digital decoding, Dolby ProLogic decoding, stereo, and quad modes. I have connected them to my Audigy 2 using analog connections, and also digital output. The problem is, that they process both kind of inputs (analog and digital) all the time in most modes simultaneously. For example, when I set them to "quad" mode (for gaming) they process analog signal that Audigy deli'vers them, but also they attempt to decode the signal from digital input. This produces some kind of phase distortions (basses dissappear and the sound becomes slightly muffled). Possible solutions could be : - disable digital decoding in speakers when using analog output from Audigy - this can't be done, these speakers' decoder is not configurable, - disconnect digital cable when using analog output from Audigy - obvious solution, however not very comfortable - disable "ON-DEMAND" spdif output on Audigy card and enable it when necessary. This would be most satisfying option for me. But.... is it possible at all ? Just something similar to the "Digital output only" setting in soundcard panel, but in my case i'd like to have an option of "Analog outputs only". Thanks in advance for any help <img title="Smiley Happy" alt="" src="http://forums.creative.com/i/smilies/6x6_smiley-happy.gif"> Greetings, Martin
No-one answered me, unfortunately
Yesterday I moved to Vista Ultimate and newest set of Creative Drivers.
To my surprise, there is an option of SPDIF output volume and mute in system mixer. However, it also doesn't work.
Can anyone confirm, if I can mute digital output whenever I want ?
Best regards,
Martin

Glad to hear that I'm not the only one experiencing such pain with this card.
After 3 connectors, I have my SPDIF of my Audigy 2 ZS connected to my Recei'ver and passing sound. However, it is NOT passing the 5. AC3/DTS stream. Playing a movie through Media Center 2005, if Dolby Digital 5. is selected, I hear the movie, but the Recei'ver does not indicate it is in Dolby Digital (like when I play it through my standalone DVD Player). When selecting DTS in the Audio Options of the DVD Menu, I hear no sound at all.
I have a minijack to RCA Stereo connector with a Digial Coax cable going from the White connector to my Recei'ver Digital Coax Input.
I have set the Device Decoding Options for SPDIF Passthrough.
What am I missing? This is going on a week now to get something going that worked right out of the box with a $40 DVD Player. And the $40 DVD Player sounds better than this $00 sound card....because it passes the AC3 stream flawlessly.

Hi! I can't upgrade my iTunes 10.3.1.55 on my Windows XP 2002 SP3 to the latest version of iTunes. Got the message: "A problem has occured with the Windows Installer-package. A program needed for this installation could not be run." What to do?

Hi! I can't upgrade my iTunes 10.3.1.55 on my Windows XP 2002 SP3 to the latest version of iTunes. Got the message: "A problem has occured with the Windows Installer-package. A program needed for this installation could not be run." What to do?

Perhaps let's first try updating your Apple Software Update.
Launch Apple Software Update ("Start > All Programs > Apple Software Update"). Does it launch and offer you a newer version of Apple Software Update? If so, choose to install just that update to Apple Software Update. (Deselect any other software offered at the same time.)
If the ASU update goes through okay, try another iTunes install. Does it go through without the errors this time?

When trying to install iTunes I get an error saying "a program needed to install itunes cannot be run". Any ideas what that program is?

My computer would not let me update my version of itunes so I was advised to uninstall and start fresh. I still get the same error..."a program needed to complete the installation cannot run". Can any one tell me what program they are referring to or if anyone has a fix for this?
Mandee

I'd start with the following user tip with that one:
"There is a problem with this Windows Installer package ..." error messages when installing iTunes for Windows

My first java programming - Need some help please!!!

I have to create a simple java program which i am not good at i am ok in C but my java is quite bad. The program need to define a class called Student and with a string called StudentNAme, a integer StudentID(key), An array of 8 integers called Marks that holds the students marks for 8 modules. It also says Include appropriate accessors, mutators and constructor(s) as well as a method to update the student�s marks. Anybody please help me in this question. I prefer an simple example of this program so I can learn faster, I dont even know how to declare a class.. So sorry but please help me out and thanks in advance

I would also suggest you try using an IDE like
eclipse (free)
www.eclipse.org
This will help you get a working program much faster.But please do also tell them that if they have troubles using it, they're supposed to read the IDE manual instead of posting here.

EXPECTED OUTPUT:   here i need to get the count of 932 + 134 records = 1064

Hi Team,
could you pls suggest y iam getting wrong count.
select * from i_invoice_info_t_log_v invlog,invoice_header_t invhead
WHERE substr(invlog.tot_cust_no,1,7)=substr(invhead.acct_no,3,7)--------comparing tot_cust_no and acct_no for the other countries
and invhead.comp_code NOT in (2300) ----here when iam running this query i am getting the count of 932 records.
select * from i_invoice_info_t_log_v invlog,invoice_header_t invhead
where substr(invlog.tot_cust_no,3,7)=to_char(substr(invhead.acct_no,3,7))--------------comparing tot_cust_no and acct_no FOR THE COUNTRY 2300
and invhead.comp_code in (2300) ----Here when i am running this query i am getting the count of 134 records.
EXPECTED OUTPUT:   here i need to get the count of 932 + 134 records = 1064 records.
I am using this query like below:
select * from i_invoice_info_t_log_v invlog,invoice_header_t invhead
where
(substr(invlog.tot_cust_no,1,7)=substr(invhead.acct_no,3,7)
           and invhead.comp_code NOT in (2300)
          OR
          (substr(invlog.tot_cust_no,3,7)=to_char(substr(invhead.acct_no,3,7))
           and invhead.comp_code in (2300)
)---------------------------------------------------here when i am running this query i am getting the count of 18381 records which is incorrect.
Expected output: i need to get the data for the comp_code which are not in 2300 and which are in 2300... both

select *
from i_invoice_info_t_log_v invlog,
        invoice_header_t invhead
WHERE    (
                substr(invlog.tot_cust_no,1,7) = substr(invhead.acct_no,3,7) --comparing tot_cust_no and acct_no for the other countries
            and
                invhead.comp_code NOT in (2300) --here when iam running this query i am getting the count of 932 records.
        or (
                substr(invlog.tot_cust_no,3,7) = to_char(substr(invhead.acct_no,3,7)) --comparing tot_cust_no and acct_no FOR THE COUNTRY 2300
            and
                invhead.comp_code in (2300) --Here when i am running this query i am getting the count of 134 records.
/SY.

HOW TO CREATE A DRILLDOWN PROGRAM NEED EXAMPLE

HAI FRIENDS
1 I WANT TO KNOW HOW TO CREATE A DRILLDOWN PROGRAM NEED EXAMPLE IN ABAP
2 NEED ABAP PROGRAM EBOOK
PLZ DO IT

CHECK THIS ALV DRILL DOWN REPORT
*& Report ZHAI_SD_CUSTOMER_DETAILS_ALV
REPORT ZHAI_SD_CUSTOMER_DETAILS_ALV.
TYPE-POOLS: SLIS.
    TYPES DECLARATIONS
TABLES : KNA1.
DATA : BEGIN OF IT_CUST OCCURS 0,
KUNNR LIKE KNA1-KUNNR,
NAME1 LIKE KNA1-NAME1,
LAND1 LIKE KNA1-LAND1,
ORT01 LIKE KNA1-ORT01,
STRAS LIKE KNA1-STRAS,
PSTLZ LIKE KNA1-PSTLZ,
       END OF IT_CUST.
DATA:BEGIN OF IT_SALE OCCURS 0,
VBELN LIKE VBAK-VBELN,"SALES DOC NO
AUDAT LIKE VBAK-AUDAT,"DATE RECIEVED AND SENT
AUART LIKE VBAK-AUART,"SALES DOC LIKE
NETWR LIKE VBAK-NETWR,"NET VALUE IN DOC CURRENCY
KUNNR LIKE VBAK-KUNNR,
      END OF IT_sale.
TYPES: BEGIN OF TY_ITEM,
VBELN TYPE VBAP-VBELN,
POSNR TYPE VBAP-POSNR,"ITEM NO
MATNR TYPE VBAP-MATNR,"MATERIAL NO
CHARG TYPE VBAP-CHARG,"BATCH
MATKL TYPE VBAP-MATKL,"MATERIAL GROUP
MEINS TYPE VBAP-MEINS,"BASE UNIT OF MEASURE
END OF TY_ITEM.
SELECT-OPTIONS : S_KUNNR FOR KNA1-KUNNR.
     INTERNAL TABLES
DATA:
     IT_CUST TYPE TABLE OF TY_CUST,
     IT_SALE TYPE TABLE OF TY_SALE,
      IT_ITEM TYPE TABLE OF TY_ITEM.
                   INTERNAL TABLES FOR ALV
DATA: IT_FCAT   TYPE SLIS_T_FIELDCAT_ALV,
      IT_FCAT1 TYPE SLIS_T_FIELDCAT_ALV,
      IT_FCAT3 TYPE SLIS_T_FIELDCAT_ALV.
DATA: IT_EVENTS TYPE TABLE OF   slis_alv_event,
      IT_EVENTS1 TYPE TABLE OF SLIS_ALV_EVENT,
      IT_EVENTS2 TYPE TABLE OF SLIS_ALV_EVENT.
DATA: IT_LISTHEADER1 TYPE SLIS_T_LISTHEADER,
      IT_LISTHEADER TYPE TABLE OF slis_listheader,
      IT_LISTHEADER3 TYPE TABLE OF SLIS_LISTHEADER,
      IT_FOOTER TYPE TABLE OF SLIS_LISTHEADER.
DATA: IT_SORT TYPE SLIS_T_SORTINFO_ALV,
      WA_SORT LIKE LINE OF IT_SORT.
                   WORK AREAS FOR ALV
DATA: WA_LAYOUT TYPE SLIS_LAYOUT_ALV,
      WA_LAYOUT1 TYPE SLIS_LAYOUT_ALV,
      WA_FCAT    LIKE LINE OF IT_FCAT,
      WA_FCAT1   LIKE LINE OF IT_FCAT1,
      WA_FCAT3   LIKE LINE OF IT_FCAT3,
      WA_EVENTS LIKE LINE OF IT_EVENTS,
      WA_EVENTS1 LIKE LINE OF IT_EVENTS,
      WA_EVENTS2 LIKE LINE OF IT_EVENTS.
        WORK VARIABLES
DATA: W_REPID TYPE SY-REPID,
      W_KUNNR TYPE KNA1-KUNNR.
$$**----
   WORK AREAS
    MACROS
DEFINE ADD_FCAT1..
WA_FCAT1-COL_POS = &1.
WA_FCAT1-FIELDNAME = &2.
WA_FCAT1-TABNAME = &3.
WA_FCAT1-REF_TABNAME = &4.
WA_FCAT1-KEY = &5.
WA_FCAT1-DO_SUM = &6.
WA_FCAT1-HOTSPOT = &7.
WA_FCAT1-EMPHASIZE = &8.
APPEND WA_FCAT1 TO IT_FCAT1.
END-OF-DEFINITION.
START-OF-SELECTION.
PERFORM F_GET_DATA.
PERFORM F_BUILD_FCAT.
PERFORM F_GET_EVENTS.
PERFORM F_BUILD_LAYOUT USING WA_LAYOUT.
PERFORM F_GET_DISPLAY.
*&      Form F_GET_DATA
FORM F_GET_DATA .
SELECT   KUNNR
          NAME1
          LAND1
          ORT01
          STRAS
          PSTLZ FROM KNA1
          INTO TABLE
IT_CUST WHERE KUNNR IN S_KUNNR.
ENDFORM.                    " F_GET_DATA
*&      Form F_GET_DISPLAY
      text
--> p1        text
<-- p2        text
FORM F_GET_DISPLAY .
CLEAR W_REPID.
MOVE SY-REPID TO W_REPID.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
   EXPORTING
     I_CALLBACK_PROGRAM                = w_repid
I_CALLBACK_PF_STATUS_SET          = ' '
I_CALLBACK_USER_COMMAND           = ' '
     I_CALLBACK_TOP_OF_PAGE            = 'F_TOP_OF_PAGE'
I_CALLBACK_HTML_TOP_OF_PAGE       = ' '
I_CALLBACK_HTML_END_OF_LIST       = ' '
I_STRUCTURE_NAME                  =
I_BACKGROUND_ID                   = 'DUCK'
I_GRID_TITLE                      =
I_GRID_SETTINGS                   =
   IS_LAYOUT                         = WA_LAYOUT
     IT_FIELDCAT                        = IT_FCAT
IT_EXCLUDING                      =
IT_SPECIAL_GROUPS                 =
IT_SORT                           =
IT_FILTER                         =
IS_SEL_HIDE                       =
I_DEFAULT                         = 'X'
I_SAVE                            = ' '
IS_VARIANT                        =
     IT_EVENTS                          = IT_EVENTS
IT_EVENT_EXIT                     =
IS_PRINT                          =
IS_REPREP_ID                      =
I_SCREEN_START_COLUMN             = 0
I_SCREEN_START_LINE               = 0
I_SCREEN_END_COLUMN               = 0
I_SCREEN_END_LINE                 = 0
I_HTML_HEIGHT_TOP                 = 0
I_HTML_HEIGHT_END                 = 0
IT_ALV_GRAPHICS                   =
IT_HYPERLINK                      =
IT_ADD_FIELDCAT                   =
IT_EXCEPT_QINFO                   =
IR_SALV_FULLSCREEN_ADAPTER        =
IMPORTING
E_EXIT_CAUSED_BY_CALLER           =
ES_EXIT_CAUSED_BY_USER            =
    TABLES
      T_OUTTAB                          = IT_CUST
EXCEPTIONS
PROGRAM_ERROR                     = 1
OTHERS                            = 2
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM.                    " F_GET_DISPLAY
*&      Form F_GET_EVENTS
      text
--> p1        text
<-- p2        text
FORM F_GET_EVENTS .
CALL FUNCTION 'REUSE_ALV_EVENTS_GET'
    EXPORTING
      I_LIST_TYPE     = 0
    IMPORTING
      ET_EVENTS       = IT_EVENTS
    EXCEPTIONS
      LIST_TYPE_WRONG = 1
      OTHERS          = 2.
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
SORT IT_EVENTS.
READ TABLE IT_EVENTS INTO WA_EVENTS
WITH KEY NAME = 'TOP_OF_PAGE' BINARY SEARCH.
IF SY-SUBRC EQ 0.
WA_EVENTS-FORM = 'F_TOP_OF_PAGE'.
MODIFY IT_EVENTS INDEX SY-TABIX FROM
WA_EVENTS TRANSPORTING FORM.
ENDIF.
READ TABLE IT_EVENTS INTO WA_EVENTS
WITH KEY NAME = 'USER_COMMAND' BINARY SEARCH.
IF SY-SUBRC EQ 0.
WA_EVENTS-FORM = 'F_USER_COMMAND'.
MODIFY IT_EVENTS FROM WA_EVENTS INDEX
SY-TABIX TRANSPORTING FORM.
READ TABLE IT_EVENTS INTO WA_EVENTS
WITH KEY NAME = 'USER_COMMAND' BINARY SEARCH.
ENDIF.
READ TABLE IT_EVENTS INTO WA_EVENTS WITH
KEY NAME = 'END_OF_PAGE' BINARY SEARCH.
IF SY-SUBRC EQ 0.
WA_EVENTS-FORM = 'F_END_OF_PAGE'.
MODIFY IT_EVENTS FROM WA_EVENTS
INDEX SY-TABIX TRANSPORTING FORM.
ENDIF.
ENDFORM.                    "F_GET_EVENTS
*&      Form F_BUILD_LAYOUT
FORM F_BUILD_LAYOUT USING P_WA_LAYOUT LIKE WA_LAYOUT .
CLEAR P_WA_LAYOUT.
P_WA_LAYOUT-COLWIDTH_OPTIMIZE = 'X'.
*P_WA_LAYOUT-F2CODE = '&ETA'.
*p_wa_layout-detail_popup = 'X'.
P_WA_LAYOUT-DETAIL_TITLEBAR = 'ALV REPORT'.
*P_WA_LAYOUT-CONFIRMATION_PROMPT = 'X'.
ENDFORM.                    " F_BUILD_LAYOUT
*&      Form F_TOP_OF_PAGE
FORM F_TOP_OF_PAGE .
refresh it_listheader.
DATA: LS_LIST TYPE SLIS_LISTHEADER.
LS_LIST-TYP = 'H'.
LS_LIST-INFO = TEXT-004.
APPEND LS_LIST TO IT_LISTHEADER.
LS_LIST-typ = 'S'.
LS_LIST-key = 'Date: '.
CONCATENATE sy-datum+6(2) '.'
sy-datum+4(2) '.'
sy-datum(4) INTO LS_LIST-info. "todays date
append LS_LIST to IT_LISTHEADER.
clear: LS_LIST.
LS_LIST-TYP = 'S'.
LS_LIST-KEY = 'DEVELOPED:'.
LS_LIST-INFO = SY-UNAME.
APPEND LS_LIST TO IT_LISTHEADER.
CLEAR LS_LIST.
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
    EXPORTING
      IT_LIST_COMMENTARY = IT_LISTHEADER
      I_LOGO             = 'GLOBAL'.
ENDFORM.                    " F_TOP_OF_PAGE
*&      Form F_BUILD_FCAT
FORM F_BUILD_FCAT .
CLEAR: W_REPID,
       IT_FCAT.
MOVE SY-REPID TO W_REPID.
CALL FUNCTION 'REUSE_ALV_FIELDCATALOG_MERGE'
   EXPORTING
     I_PROGRAM_NAME               = W_REPID
     I_INTERNAL_TABNAME           = 'IT_CUST'
     I_INCLNAME                   = W_REPID
    CHANGING
      CT_FIELDCAT                  = IT_FCAT
EXCEPTIONS
   INCONSISTENT_INTERFACE       = 1
   PROGRAM_ERROR                = 2
   OTHERS                       = 3
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM.                    " F_BUILD_FCAT
*&      Form F_USER_COMMAND
FORM F_USER_COMMAND USING R_UCOMM LIKE SY-UCOMM
                          RS_SELFIELD TYPE SLIS_SELFIELD.
CASE R_UCOMM.
WHEN '&IC1'.
IF RS_SELFIELD-FIELDNAME = 'KUNNR'.
READ TABLE IT_CUST
INDEX RS_SELFIELD-TABINDEX.
MOVE rs_selfield-value TO W_KUNNR.
IF IT_CUST IS NOT INITIAL.
   PERFORM F_GET_SECONDARY_DATA.
   PERFORM F_BUILD_FCAT1.
   PERFORM F_BUILD_EVENTS.
   PERFORM F_GET_SORT.
   PERFORM F_BUILD_LAYOUT1.
PERFORM F_GET_DISPLAY1.
ENDIF.
ENDIF.
ENDCASE.
ENDFORM.                    " F_USER_COMMAND
*&      Form F_GET_SECONDARY_DATA
FORM F_GET_SECONDARY_DATA .
data:v_data.
SELECT VBELN
          AUDAT
          AUART
          NETWR
KUNNR FROM VBAK INTO TABLE IT_SALE
WHERE KUNNR EQ IT_CUST-KUNNR.
IF IT_SALE[] IS INITIAL .
   CALL FUNCTION 'POPUP_TO_CONFIRM'
     EXPORTING
      TITLEBAR                    = SY-REPID
     DIAGNOSE_OBJECT             = ' '
       TEXT_QUESTION               = 'NO SALES FOR THIS CUSTOMER'
     TEXT_BUTTON_1               = 'Ja'(001)
     ICON_BUTTON_1               = ' '
     TEXT_BUTTON_2               = 'Nein'(002)
     ICON_BUTTON_2               = ' '
      DEFAULT_BUTTON              = '1'
      DISPLAY_CANCEL_BUTTON       = 'X'
     USERDEFINED_F1_HELP         = ' '
     START_COLUMN                = 25
     START_ROW                   = 6
     POPUP_TYPE                  =
     IV_QUICKINFO_BUTTON_1       = ' '
     IV_QUICKINFO_BUTTON_2       = ' '
    IMPORTING
      ANSWER                      = v_data
   TABLES
     PARAMETER                   =
    EXCEPTIONS
      TEXT_NOT_FOUND              = 1
      OTHERS                      = 2
   IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
   ENDIF.
case v_data.
when '2'.
leave screen.
when 'A'.
leave to screen '0'.
endcase.
ENDIF.
ENDFORM.                    " F_GET_SECONDARY_DATA
*&      Form F_BUILD_FCAT1
FORM F_BUILD_FCAT1 .
REFRESH IT_FCAT1.
CLEAR WA_FCAT1.
ADD_FCAT1:
'1' 'VBELN' 'VBAK' 'VBAK' 'X' ' ' 'X' 'C500',
'2' 'AUDAT' 'VBAK' 'VBAK' ' ' ' ' ' ' 'C400',
'3' 'AUART' 'VBAK' 'VBAK' ' ' ' ' ' ' 'C100',
'4' 'NETWR' 'VBAK' 'VBAK' ' ' 'X' ' ' 'C300'.
ENDFORM.                    " F_BUILD_FCAT1
*&      Form F_GET_DISPLAY1
      text
--> p1        text
<-- p2        text
FORM F_GET_DISPLAY1 .
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
   EXPORTING
     I_CALLBACK_PROGRAM                = SY-REPID
I_CALLBACK_PF_STATUS_SET          = ' '
    I_CALLBACK_USER_COMMAND           = 'F_USER_COMMAND1'
     I_CALLBACK_TOP_OF_PAGE            = 'F_TOP_OF_PAGE1'
I_CALLBACK_HTML_TOP_OF_PAGE       = ' '
I_CALLBACK_HTML_END_OF_LIST       = ' '
I_STRUCTURE_NAME                  =
I_BACKGROUND_ID                   = ' '
I_GRID_TITLE                      =
I_GRID_SETTINGS                   =
IS_LAYOUT                         =
     IT_FIELDCAT                       = IT_FCAT1
IT_EXCLUDING                      =
IT_SPECIAL_GROUPS                 =
   IT_SORT                            = IT_SORT
IT_FILTER                         =
IS_SEL_HIDE                       =
I_DEFAULT                         = 'X'
I_SAVE                            = ' '
IS_VARIANT                        =
     IT_EVENTS                         = IT_EVENTS1
IT_EVENT_EXIT                     =
IS_PRINT                          =
IS_REPREP_ID                      =
I_SCREEN_START_COLUMN             = 0
I_SCREEN_START_LINE               = 0
I_SCREEN_END_COLUMN               = 0
I_SCREEN_END_LINE                 = 0
I_HTML_HEIGHT_TOP                 = 0
I_HTML_HEIGHT_END                 = 0
IT_ALV_GRAPHICS                   =
IT_HYPERLINK                      =
IT_ADD_FIELDCAT                   =
IT_EXCEPT_QINFO                   =
IR_SALV_FULLSCREEN_ADAPTER        =
IMPORTING
E_EXIT_CAUSED_BY_CALLER           =
ES_EXIT_CAUSED_BY_USER            =
    TABLES
      T_OUTTAB                          = IT_SALE
EXCEPTIONS
PROGRAM_ERROR                     = 1
OTHERS                            = 2
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM.                    " F_GET_DISPLAY1
*&      Form F_BUILD_EVENTS
FORM F_BUILD_EVENTS .
clear wa_events1.
CALL FUNCTION 'REUSE_ALV_EVENTS_GET'
   EXPORTING
     I_LIST_TYPE           = 0
   IMPORTING
     ET_EVENTS             = IT_EVENTS1.
EXCEPTIONS
LIST_TYPE_WRONG       = 1
OTHERS                = 2
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
SORT IT_EVENTS1.
read table It_events1 with key name = 'TOP_OF_PAGE'
into WA_eventS1.
if sy-subrc = 0.
    move 'F_TOP_OF_PAGE1' to WA_EventS1-form.
    append WA_eventS1 to it_events1.
endif.
READ TABLE IT_EVENTS WITH KEY NAME = 'USER_COMMAND'
INTO WA_EVENTS1.
IF SY-SUBRC = 0.
MOVE 'F_USER_COMMAND1' TO WA_EVENTS1-FORM.
APPEND WA_EVENTS1 TO IT_EVENTS1.
ENDIF.
*READ TABLE IT_EVENTS WITH KEY NAME = 'SUBTOTAL_TEXT'
INTO WA_EVENTS1.
IF SY-SUBRC = 0.
MOVE 'F_SUBTOTAL_TEXT' TO WA_EVENTS1-FORM.
APPEND WA_EVENTS1 TO IT_EVENTS1.
ENDIF.
ENDFORM.                    " F_BUILD_EVENTS
*&      Form F_TOP_OF_PAGE1
FORM F_TOP_OF_PAGE1 .
DATA: LS_HEADER TYPE SLIS_LISTHEADER.
REFRESH : IT_LISTHEADER1.
LS_HEADER-TYP = 'H'.
LS_HEADER-INFO = 'SALES ORDER DETAILS FOR CUSTOMER'.
APPEND LS_HEADER TO it_listheader1.
CLEAR LS_HEADER.
LS_HEADER-TYP = 'S'.
LS_HEADER-KEY = 'CUSTOMER NO:'.
LS_HEADER-INFO = W_KUNNR.
APPEND LS_HEADER TO IT_LISTHEADER1.
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
    EXPORTING
      IT_LIST_COMMENTARY       = IT_LISTHEADER1
     I_LOGO                   = 'DUCK'
I_END_OF_LIST_GRID       =
I_ALV_FORM               =
ENDFORM.                    " F_TOP_OF_PAGE
*&      Form F_END_OF_PAGE
      text
--> p1        text
<-- p2        text
FORM F_END_OF_PAGE .
DATA:LS_FOOTER TYPE SLIS_LISTHEADER.
LS_FOOTER-TYP = 'S'.
LS_FOOTER-KEY = SY-UNAME.
LS_FOOTER-INFO = 'DEVELOPED BY:'.
APPEND LS_FOOTER TO IT_FOOTER.
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
EXPORTING
    IT_LIST_COMMENTARY       = IT_FOOTER
ENDFORM.                    " F_END_OF_PAG
*&      Form F_USER_COMMAND1
      text
--> p1        text
<-- p2        text
FORM F_USER_COMMAND1 USING R_UCOMM LIKE SY-UCOMM
                           RS_SELFIELD TYPE SLIS_SELFIELD.
CASE R_UCOMM.
WHEN '&IC1'.
READ TABLE IT_SALE INDEX RS_SELFIELD-TABINDEX.
PERFORM F_GET_SECONDARY2.
PERFORM F_GET_FCAT3 USING:
'VBELN' '1' 'C' '12' 'SALES_DOC'   'M' 'VBAP' 'X' 'C51' ' ',
'POSNR' '2' ' ' '5' 'ITEM_NO'      'M' 'VBAP' ' ' 'C61' ' ',
'MATNR' '3' ' ' '12' 'MATERIAL_NO' 'M' 'VBAP' ' ' 'C71' ' ',
'CHARG' '4' ' ' '10' 'BATCH_NO'    'M' 'VBAP' ' ' 'C41' ' ',
'MATKL' '5' ' ' '10' 'MAT_GROUP'   'M' 'VBAP' ' ' 'C31' ' ',
'MEINS' '6' ' ' '12' 'BASE_UNIT'   'M' 'VBAP' ' ' 'C21' 'X' .
PERFORM F_GET_EVENTS2 USING WA_EVENTS2
                     CHANGING IT_EVENTS2.
PERFORM F_GET_DISPLAY3.
REFRESH IT_FCAT3.
ENDCASE.
ENDFORM.                    " F_USER_COMMAND1
*&      Form F_GET_SECONDARY2
      text
--> p1        text
<-- p2        text
FORM F_GET_SECONDARY2 .
SELECT VBELN
       POSNR
       MATNR
       MATKL
       MEINS
       FROM VBAP INTO
       TABLE IT_ITEM WHERE
       VBELN EQ IT_SALE-VBELN.
IF SY-DBCNT EQ 0.
MESSAGE E000(ZHAI) WITH TEXT-KO1.
ENDIF.
ENDFORM.                    " F_GET_SECONDARY2
*&      Form F_GET_DISPLAY3
      text
--> p1        text
<-- p2        text
FORM F_GET_DISPLAY3 .
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
   I_CALLBACK_PROGRAM                = SY-REPID
   I_CALLBACK_PF_STATUS_SET          = 'F_PF_STATUS'
I_CALLBACK_USER_COMMAND           = ' '
I_CALLBACK_TOP_OF_PAGE            = 'F_TOP_OF_PAGE3'
   I_CALLBACK_HTML_TOP_OF_PAGE       = 'F_TOP_OF_PAGE3'
I_CALLBACK_HTML_END_OF_LIST       = ' '
I_STRUCTURE_NAME                  =
I_BACKGROUND_ID                   = ' '
I_GRID_TITLE                      =
I_GRID_SETTINGS                   =
   IS_LAYOUT                         = WA_LAYOUT1
   IT_FIELDCAT                       = IT_FCAT3
IT_EXCLUDING                      =
IT_SPECIAL_GROUPS                 =
IT_SORT                           = IT_SORT
IT_FILTER                         =
IS_SEL_HIDE                       =
I_DEFAULT                         = 'X'
I_SAVE                            = ' '
IS_VARIANT                        =
   IT_EVENTS                         = IT_EVENTS2
IT_EVENT_EXIT                     =
IS_PRINT                          =
IS_REPREP_ID                      =
I_SCREEN_START_COLUMN             = 0
I_SCREEN_START_LINE               = 0
I_SCREEN_END_COLUMN               = 0
I_SCREEN_END_LINE                 = 0
I_HTML_HEIGHT_TOP                 = 0
I_HTML_HEIGHT_END                 = 0
IT_ALV_GRAPHICS                   =
IT_HYPERLINK                      =
IT_ADD_FIELDCAT                   =
IT_EXCEPT_QINFO                   =
IR_SALV_FULLSCREEN_ADAPTER        =
IMPORTING
E_EXIT_CAUSED_BY_CALLER           =
ES_EXIT_CAUSED_BY_USER            =
TABLES
    T_OUTTAB                          = IT_ITEM
EXCEPTIONS
PROGRAM_ERROR                     = 1
OTHERS                            = 2
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM.                    " F_GET_DISPLAY3
*&      Form F_GET_FCAT3
FORM F_GET_FCAT3 USING    VALUE(P1)
                           VALUE(P2)
                           VALUE(P3)
                           VALUE(P4)
                           VALUE(P5)
                           VALUE(P6)
                           VALUE(P7)
                           VALUE(P8)
                           VALUE(P9)
                          VALUE(P10).
CLEAR WA_FCAT3.
WA_FCAT3-FIELDNAME = P1.
WA_FCAT3-COL_POS = P2.
WA_FCAT3-JUST = P3.
WA_FCAT3-OUTPUTLEN = P4.
WA_FCAT3-SELTEXT_M = P5.
WA_FCAT3-DDICTXT = P6.
WA_FCAT3-REF_TABNAME = P7.
WA_FCAT3-HOTSPOT = P8.
WA_FCAT3-EMPHASIZE = P9.
WA_FCAT3-DO_SUM = P10.
APPEND WA_FCAT3 TO IT_FCAT3.
ENDFORM.                    " F_GET_FCAT3
*&      Form F_BUILD_LAYOUT1
      text
--> p1        text
<-- p2        text
FORM F_BUILD_LAYOUT1 .
WA_LAYOUT1-totals_text = 'TOTAL'.
wa_layout1-detail_popup = 'X'.
ENDFORM.                    " F_BUILD_LAYO
*&      Form F_GET_EVENTS2
      text
     -->P_IT_EVENTS2 text
     <--P_WA_EVENTS2 text
FORM F_GET_EVENTS2 USING    VALUE(P_WA_EVENTS2) LIKE WA_EVENTS2
                    CHANGING P_IT_EVENTS2 LIKE IT_EVENTS2.
P_WA_EVENTS2-NAME = 'HTML_TOP_OF_PAGE'.
P_WA_EVENTS2-FORM = 'F_TOP_OF_PAGE3'.
APPEND P_WA_EVENTS2 TO P_IT_EVENTS2.
CLEAR P_WA_EVENTS2.
P_WA_EVENTS2-NAME = 'PF_STATUS'.
P_WA_EVENTS2-FORM = 'F_PF_STATUS'.
APPEND P_WA_EVENTS2 TO P_IT_EVENTS2.
CLEAR P_WA_EVENTS2.
P_WA_EVENTS2-NAME = 'USER_COMMAND'.
P_WA_EVENTS2-FORM = 'F_USER_COMMAND3'.
APPEND P_WA_EVENTS2 TO P_IT_EVENTS2.
CLEAR P_WA_EVENTS2.
p_wa_events2-name = 'HTML_END_OF_LIST'.
P_WA_EVENTS2-FORM = 'F_HTML_END_OF_LIST'.
APPEND P_WA_EVENTS2 TO P_IT_EVENTS2.
CLEAR p_wa_events2.
ENDFORM.                    " F_GET_EVENTS2
*&      Form F_TOP_OF_PAGE3
      text
--> p1        text
<-- p2        text
FORM F_TOP_OF_PAGE3 USING DOCUMENT TYPE REF TO cl_dd_document .
data : link_area type ref to cl_dd_area,
       picture_area type ref to cl_dd_area.
CALL METHOD DOCUMENT->ADD_TEXT
EXPORTING
    TEXT          = 'ALV REPORT'
   TEXT_TABLE    =
   FIX_LINES     =
   SAP_STYLE     =
    SAP_COLOR     = cl_dd_area=>list_background_int
    SAP_FONTSIZE = 'LARGE'
    SAP_FONTSTYLE = 'TIMES'
    SAP_EMPHASIS = 'STRONG'
   STYLE_CLASS   =
CHANGING
   DOCUMENT      =
CALL METHOD DOCUMENT->NEW_LINE.
CALL METHOD DOCUMENT->ADD_PICTURE
EXPORTING
    PICTURE_ID       = 'LOGO1'
    WIDTH            = '10%'
ENDFORM.                    " F_TOP_OF_PAGE3
*&      Form F_GET_SORT
      text
--> p1        text
<-- p2        text
FORM F_GET_SORT .
WA_SORT-FIELDNAME = 'NETWR'.
WA_SORT-SPOS = 4.
WA_SORT-UP = 'X'.
WA_SORT-SUBTOT = 'X'.
APPEND WA_SORT TO IT_SORT.
ENDFORM.                    " F_GET_SORT
*&      Form F_PF_STATUS
      text
--> p1        text
<-- p2        text
FORM F_PF_STATUS USING RS_EXTAB TYPE SLIS_T_EXTAB .
SET PF-STATUS 'ZHAIALV' EXCLUDING RS_EXTAB.
ENDFORM.                    " F_PF_STATUS
*&      Form F_USER_COMMAND3
      text
--> p1        text
<-- p2        text
FORM F_USER_COMMAND3 USING R_UCOMM LIKE SY-UCOMM
                           RS_SELFIELD TYPE SLIS_SELFIELD.
CASE R_UCOMM.
WHEN '&SALE'.
IF RS_SELFIELD-FIELDNAME = 'VBELN'.
SET parameter ID 'AUN' FIELD rs_selfield-value.
CALL TRANSACTION 'VA02' AND SKIP FIRST SCREEN.
ENDIF.
WHEN '&MAT'.
IF RS_SELFIELD-FIELDNAME = 'MATNR'.
SET PARAMETER ID 'MAT' FIELD RS_SELFIELD-VALUE.
CALL TRANSACTION 'MM02' AND SKIP FIRST SCREEN.
ENDIF.
ENDCASE.
ENDFORM.                    " F_USER_COMMAND3
*&      Form F_HTML_END_OF_LIST
      text
--> p1        text
<-- p2        text
FORM F_HTML_END_OF_LIST USING DOCUMENT TYPE REF TO CL_DD_DOCUMENT.
DATA : PAGE TYPE SDYDO_TEXT_ELEMENT.
MOVE SY-PAGNO TO PAGE.
CALL METHOD DOCUMENT->ADD_TEXT
EXPORTING
    TEXT          = PAGE
   TEXT_TABLE    =
   FIX_LINES     =
   SAP_STYLE     =
   SAP_COLOR     =
   SAP_FONTSIZE =
   SAP_FONTSTYLE =
   SAP_EMPHASIS =
   STYLE_CLASS   =
CHANGING
   DOCUMENT      =
ENDFORM.                    " F_HTML_END_OF_LIS

Audigy 2 ZS/Lost sound Output Rear speakers 5.1(line out

I seem to have no output on lineout #2. Can switch speaker plugs to line or 3 and then get sound from rear speakers.
I believe i might have something wrong with card,It's set for 5.,only frt.lft & rt center,sub seem to work.Any Ideas out there?
Thanks in advance! Windows XP SP-2
P4-2.4OC'd to 3.4// 4-20 gig HDD's Raid 0//Rocket raid 640 pci card//2 Gigs PC4000///audigy 2 ZS//MSI 865 Neo-2 Platinum//
NEC 3500 DVD & TDK 880 GDVD Burners//Gainward golden Sample FX5700 UltraMessage Edited by Biggunn on 05-25-2005 :3 PM

OK , Perhaps i didnt Say this at first But, My speakers,souncard,etc. all Were working fine previously. Just This Past week or so i have lost sound to my rear speakers. The speakers i am using are logitech Z-5500's. As i stated earlier, i can switch speaker connections at soundcard and get sound from the rear speakers. I have tried these speakers on another computer(audigy LS card) and they work on that one without any problems. I have tried the speaker settings console where it shows you a diagram of 5. layout and sound coming from each speaker as it goes around the diagram,it is showing sound symbol for rear speakers but, no sound out of speakers in rear. The creative diagnostics has been run and everything passes in it and shows no problems.

Initial Programming Needed?

My ancient LG flip-phone is on its last legs, so I am going to attempt to move my service to a newer flip phone (donated by a friend) It's a basic Samsung flip-phone of some sort, if that matters to this question.
I've looked over the online steps to transfer to the new phone, and it all looks pretty clear. And, I've backed-up my contacts from the old phone using Backup Assistant. So far, so good.
On the new phone though, I am getting this big, red message on the screen saying Initial Programming Needed. The phone won't do anything unless I first do...something.
My question...What do I need to do with this new phone in order to get it in a state to accept transfer of my service? Or, can I go ahead and perform the online transfer and this new phone will magically activate?
Thanks!

As several members have suggested already before me, do the *228 programming, choose option one, enter your phone number, enter the account password you use to connect to phone support, and then you should be good to go. Make sure the LG phone is turned off when the process with the Samsung is ensuing. If you still are having difficulty with the activation process, calling verizon at 800-922-0204, should resolve it, as they can solve almost anything.

How do I gang automation? ie. I need to reduce the volume on the master fader, so I need to reduce the volume of all my faders ( ideally simultaneously.)

How do I gang automation? ie. I need to reduce the volume on the master fader, so I need to reduce the volume on all my faders (ideally simultaneously.)

Open the Mixer, select all the faders at once and lower 1 of them. the others will follow proportionally.
Or you can just put a gain plugin in the master output and lowerr the gain coming to the masterfader.

Need to reduce the page size, not the file size (shrink the page to allow for binding)

I need to reduce the image size (text is too large to allow for binding).

What is the output device - it is best to set scaling there, or scale while printing from Acrobat. The only means to accomplish
I need to reduce the image size (text is too large to allow for binding).
Print to Adobe PDF printer.
Define a page size in the Properties of the PDF Printer
Print from Acrobat to PDF Printer with scaling in effect.

Audigy 2 zs output mixing program needed to reduce overpowered rear speakers

Similar Messages

Maybe you are looking for