Audigy 2 ZS Plat Pro and Cubase AI 4 issues

+? Hello everyone!
Just wondered if anyone had come across this before?
I'm just setting up a project in Cubase AI 4 that came with my Yamaha MM6. I've selected Creative ASIO driver, direct monitoring, release into background etc...and I've set up the inputs and outputs (Line In 3 plus Mic).
When I play the keyboard, I'm seeing the audio registering on the mixer in Cubase, but no sound is coming through my speakers. I've checked that the Creative mixer Line In 3 wasnt muted and tested the speakers, but still nothing.
However...if the Creative Mixer is open and I maximise it while I'm using Cubase, I can suddenly hear my keyboard..!.*?
Erm...does anyone know what I'm doing wrong? I have to say that the Creative mixer has always caused me a headache when recording, but that might just be because I'm missing something....
Cheers
Kat

already asked and discussed in the last 3 days.
http://forums.creative.com/creativel....id=79342#M940
next time do a search before posting in a new thread, it helps keeping lisibility and finding quicky users with the same interest.

Similar Messages

SB Audigy 2 ZS Plat Pro and MXL 990 Phantom power microph

I recently acquired the microphone which is "phantom power".
I am presuming that it is not compatible with the sound card, would that be true?
if any walkaround could be suggested so that i can use a better quality mic with the sound card it would be much appreciated.
phantom power 48v +/- 4 (if that means anything).
I will be getting a mixer soon as well to aid a variety of projects but all my hardware is sourced at relati've low cost so compatibility issues cannot be tested in advance. again if there are any issues with connecting to the hub it would be good to know.
cheers
Ian

already asked and discussed in the last 3 days.
http://forums.creative.com/creativel....id=79342#M940
next time do a search before posting in a new thread, it helps keeping lisibility and finding quicky users with the same interest.

Audigy 2 ZS plat Pro, "What you hear"? problem PLEASE H

Hello, im a gamer, I play cs:source. I just bought the plat pro and I have issues. In gaming you must use a microphone to communicate. And everything was great with my Audigy gamer. But after purchasing the plat pro I noticed I had a problem. In the system volume properties in recording windows xp has the default playback as "what you hear". It doesnt transmit what you speak into the microphone, it transmits "what you hear" Lets say you were listening to music and you try to talk into the mic. All they hear is the music, even though you have headphones on and the microphone isnt picking it up. Anyways, thats what "What you hear" does. So I select microphone in the recording properties and all is great, problem fixed. but when I load up cs:source and when I connect to a server it resets windows defaults to "what you hear" So everytime I connect to a server and try to talk all they hear are my game sounds. yes I can alt tab after connectiing to a server and switch it back again to "microphone" but its quite a hassle.
PLEASE HELP!

http://steampowered.custhelp.com/cgi...li=&p_topview=
next time, read ALL the available supports before turning to forums.

Audigy 2 ZS Platinum Pro and XP

I have Audigy 2 ZS Platinum Pro and Logitech Z-5300 5. Speakers. When using XP SP, everything worked perfectly, then I upgraded to SP2. It has been a complete multimedia nightmare.
When using the diagnostic tools, each speaker works perfectly except will always have a faded voice to the point where I cannot hear the voice but I can hear something was attempting.
WinAMP or Media player or any other MP3 player to include tools coming with creative labs products, I get music only out of a single (Center) speaker. The rest lay silent. I upgraded my sound card drivers using Creative Lab's website. Any ideas how to get my system back to normal sound quality, as of this moment I am thinking creative lab's products do not work correctly under SP2.
Any help would be appreceated and for the money spent on the card, I kind of expect creative to have a solution.

Roaming,
Try cleansweeping and reinstalling the sound card. Sometimes after a major update (like a service pack) some hardware or software needs to be reinstalled. Here is a link to the article that describes how to cleansweep your card.
http://us.creative.com/support/kb/ar...asp?l=2&sid=72
Jeremy

HT1338 I have a new MacBook. Pro and never had any issues until yesterday. I can not get it to complete its cycle to. Turn on, where I can log in like normal. I read the reboot in the little manual, but nothing. Please help!!!!!

I have a new MacBook. Pro and never had any issues until yesterday. I can not get it to complete its cycle to. Turn on, where I can log in like normal. I read the reboot in the little manual, but nothing. Please help!!!!!

So what happens when you boot it up? What do you get?

Audigy 2 ZS platinum pro and msvcrt.

scard: Audigy 2 ZS Platinum Pro
OS: Windows XP SP3
msvcrt.dll: 7.0.2600.552 located only in windows\system32 and windows\ServicePackFiles\i386
I tried to update the driver. (Full uninstall of the previous one as per the FAQ plus some cleaning tools like Driver Sweeper, Driver Cleaner, regcleaners etc) I started getting MANY msgs about "different".exe - ENTRY POINT NOT FOUND "The procedure entry point _mbsnbcpy_s could not be located in dynamic link library msvcrt.dll" (the"different".exe contains eg. CTRegSvr.EXE among others).
After restart the driver works but I don't have access to any Creative tools like the mixer for example. It's just the sound working. Nothing else.
I uninstalled everything again. After the previously described cleaning proccess I tried to reinstall the old driver from the installation CD. Same thing. Many errors during the installation proccess about "ENTRY POINT NOT FOUND on msvcrt.dll".
Any Ideas?
I appreciate the help
Pan

Problem solved.
Uninstall/Reinstall SP3 did the job
Pan

Audigy 2 ZS Platinum Pro and Vista 64

I just built a new computer system?and am trying to get my Audigy 2 ZS Platinum Pro to work in my new system. I am running 64 bit Vista?on an ASUS P5E-V HDMI motherboard with 4 GHz of memory and an intel Quad Core Processor. I have downloaded the Vista drivers, but I cannot get everything to work properly. My THX console, speaker setting console and others will no longer work. I am getting sound only through the front left and front right speakers. My subwoofer, center channel and right rear and left rear spekaers will not work. I have confirmed that analog 5. has been selected and that digital is not checked. I am at a loss as to what to do next. I have Logitech THX Z-5300e 5. speaker system. Please help!

Is there no one out there that can help?

Audigy 2 ZS Platinum Pro and Inspire T7700 does not recognize Mic on Audio Control

Hi folks,
I decided to hook up my headphone and mic sets to the Audio Control Pod for the first time recently to chat online. I'm not sure if I ever tried this when I bought the Inspire T7700 speaker system, but I cannot seem to get any voice to come through in Windows' Sound Recorder (the headphones work fine). I'm hoping that someone here can help...otherwise, I suppose I'll have to find an alternate solution than using my soundcard system.
Here are some specs:
OS: Windows XP SP2 and all current updates
Soundcard: Audigy 2 ZS Platinum Pro
Speakers: Inspire T7700 with Audio Control Pod (contains the headphone and mic jack)
Here's what I have tried:
. Updated drivers to: SBAX_WBUP2_LB_2_09_006.exe
2. Tested headsets and mics out on another one of my computers with a SoundBlaster Li've. They work fine.
3. Set each audio source with full volume in the Recording Control window as the source while recording in Windows' Sound Recorder (I know some of these aren't right, but I tried them all nonetheless):
- MIDI Synth
- Line-In 3
- Line-In /Mic (this should be the one, I think)
- S/PDIF-In
- Auxiliary (this might be the one for the Audio Control Pod)
- "What U Hear"
- Line-In 2
- CD Digital
- Wave
4. Installed the Creative software from the official CD to manage the audio and speaker settings. Retested the same as item 3 above within this software. Same results.
5. Disconnected the external I/O hub (since I am connecting to the Audio Control Pod, which connects to the speaker system and then my sound card). Interestingly, the Line-In /Mic input disappeared. All that I saw for an input (I believe) was Auxiliary. I tried even that as noted in item 3, but nothing.
Has anyone had any luck in getting a mic from a headphone set to work with the Audio Control Pod for the Inspire T7700 speaker system along with the Audigy 2 ZS Platinum Pro?
Thanks in advance for the help!

Read the FAQ on top of the soundcard forum concerning SPDIF and digital out. The reason is very easy to find out if you read that. In short: the digital out can only send out a PCM stereo signal (which is why you only get FL/FR sound) and an encoded AC-3 signal.

Problems with SB Audigy 2 ZS Platinum Pro and autoexec.nt and running games. HE

Hey, this is my first post here so Hello all!
Just wondering if anyone can help me.
Ever since i've installed my SB Audigy 2 zs platinum pro soundcard the following error has occurred whenever I attempt to play a dos-based game:
<location of game file>
c:\WINDOWS\System32\autoexec.nt. The system file is not suitable for running MS-DOS and Microsoft Windows applications.
I've looked for solutions but I've only found things relating to old old soundblaster cards etc and not an audigy 2. One solution was to copy the autoexec.nt file from the windows\repair folder into the system32 folder. It tried it and yes it worked for the games, but I then had no soundcard and had to move the file back, uninstall and reinstall my audigy 2 all over again. The games still bring up this error. The error also occurred when I tried running Band in a Box .
So I'm really stuck.
Thanks for any help.

In that case, have you try updating the latest BIOS, chipset driver, USB driver(if any) from your mainboard website.
Jason

Audigy 2 zs platinum pro and my

i have a Creative Labs Audigy 2 Zs Platinum pro (the one with the external box).
How do i go about getting sound coming from the PS2 to go through my sound card, and out the speakers. Im trying to use the optical output from the ps2, to the optical input on the external box from my sound card.
Where is the setting to make this happen...i've read over some of the post regarding this on here...but still really confused
Thanks

Anybody?

Audigy 2 ZS Platinum Pro and Gigaworks speakers

Greetings All. I was just wondering how the card and speakers connect. Does the optical on the breakout box get used or do you use the plugs on the actual card?
Also
What functions and imputs etc. does the gigaworks speakers have? Do they have an optical imput etc? A basic description would be very much appreciated. Thanks in advance!!

Cafuddled wrote:
I have just reinstalled my OS and have updated everything but have noticed the drivers off the website don?t give me the THX Console and a lot of other things that it did have with the drivers off the disc.
I have lost the install disc that came with the card so now I need to find some other way to get all the programs. I have tried the THX Console update file but that just spits out an error saying cannot find relati've components.
So does anyone know where I can get this program or anything that will do it'ss job because I really need to configure my 7. system as you can notice the difference when 7. is not properly configured in movies and games.
Specs:
Audigy 2 ZS Platinum Pro + 7. Gigaworks speakers
Windows XP SP2
http://badboy.filefront.com/
jutapa

MacBook Pro and new AirPort Extreme issue

Hi All:
I just bought a new MacBook Pro and Airport. other computers and a wii in my house seem to keep the the connection, but with the MacBook Pro i need to set up the connection every time, as I have the SSID broadcast0 turned off. Has anyone seen this before?
I have attempted to reset my keychain and the MacBook Pro remembers the wireless router at work? what could I be doing wrong?

Yes, just do the downgrade to 7.4.1. The support article is the typical nondescript article that neither indicates if it is a bug or not. This is quite irritating since I've been using an Airdisk for TM since Leopard was released (almost 2 years now). Originally you had to do hacks with "defaults" and touching files to get it to work. Then last year one of the firmware updates no longer required any hacks. Now they bust it.
It's busted because otherwise they wouldn't let TM pick the drive. They'd either present an error dialog stating it's not supported, or the Airdisk wouldn't even show up. Instead, the drive keeps falling off the network. That's something crashing inside the router. I wouldn't be surprised if the drive falls off the network when placed under any load. Apple's QA sure let us down.

Help to configure Audigy2ZS Platinum Pro and Cubase SX2

Can anyone tell me how to set my Platinum Pro card with Cubase SX2...I'm also having Latency problems recording in 24bit-96hrtz...Should I buy a mixer or is The Audigy breakout box good enough...many questions I know...I hope ye can help me,,,,

pedrozepelim197 wrote:
What's the best possible configuration for a Audigy Platinum and Sonar? (bit depth, samplig rate, etc.)
Driver mode:
ASIO: (there are not many choices available )resolution: 16-bit
SR: 48kHz
latency: on recording ~4-10 ms, on mixing 20-100ms (depending on plugins you have in use)
WDM/KS (or Asio4All):
resolution: 24-bit
SR: 48 kHz or 96 kHz
latency: Sonar sets it to 10 ms (you can set it bit lower with Asio4All), you can increase it when mixing
ASIO gives you couple of more inputs for (simultaenous) recording vs WDM/KS (or Asio4All).
You get more information/'support' from
Cakewalk -forums
jutapa

Audigy 2 ZS Platinum Pro and Inspire 5.1 Digital 5500

Hi!
Why can't i connect this digital speaker system to the external connection box of the Audigy 2 ZS? I've tried the optical as well as the coax-connection. When i run the surround soundtest in the Creative software it only gives me stereo sound in front left and right speaker.
It only works when i connect the speakers by analog connection directly to the soundcard, but then the volume settings for WAVE-sound in the Creative control panel has to be reduced to almost nothing if i wish to keep my ears.
If these speakers are'nt supposed to use digital connection....then WHY CALL THEM DIGITAL?
Message Edited by perssoe on 08-20-2005 07:48 AM

Read the FAQ on top of the soundcard forum concerning SPDIF and digital out. The reason is very easy to find out if you read that. In short: the digital out can only send out a PCM stereo signal (which is why you only get FL/FR sound) and an encoded AC-3 signal.

Audigy 2 ZS Platinum Pro and ASUS P5W DH Deluxe Motherbo

I am currently trying to get my soundblaster Audigy 2 Platinum Pro to work with this board. I have dis-abled the onboard sound but still no luck. Has anyone managed to get this to work? I am currently using the so called Hi quality onboard sound but it's nowhere near as good as my dedicated card. Any help would be appreciated.
Thank you...Rob

Is there no one out there that can help?

Audigy 2 ZS Plat Pro and Cubase AI 4 issues

Similar Messages

Maybe you are looking for