Audigy 2 ZS Plat/WinXP x64 rear sound plays through fr

As the title says, when I try to run the test through the Speaker Settings application the rear right/left channels come through the front right/left respecti'vely. What's going on here? Yes, it is set to 5. and yes the cables are hooked up correctly (orange, black, green from the firewire port over). Speakers are Logitech Z-640.
I'm going to try under Vista and report my findings.

bump, still don't know whats wrong

Similar Messages

  • Audigy 2 ZS Plat/WinXP x64/Gigabyte 965P-DS3/pop, click, hiss during HDD activity **FIXE

    Alright, I've been searching the posts on this board for the past hour with no luck in solving my problem.
    Here are my system specs:
    Core 2 Duo E4300
    4GB G.Skill DDR2-800
    eVGA 8800GTX
    Audigy 2 ZS Plat
    2x320GB SATA RAID 0
    Windows XP x64 SP2
    Whenever there is sound playing during HDD activity the sound clicks, hisses, and pops severely, definitely to the point of being unusable. This happens with both the rear jack and the front panel. The RAID array is on the JMicron controller on the board, not the Intel ICH8 south bridge. This problem does not seem to exist under Windows Vista x64, but that is so unstable that I really need XP to work correctly. I also have the Surround Mixer, Speaker Setup, and EAX Console apps installed, if that means anything.
    Things I have tried:
    Driver reinstallation
    <
    "Clean boot" method described in the FAQ<
    Things I have not tried:
    Putting the card in another PCI slot
    <
    Changing the IRQ of the card
    <
    Changing the PCI latency<
    I don't know a whole lot about the last two (the IRQ and the latency) so if someone could help me out there I'd really appreciate it. Thanks for checking out my problem and for any help you may provide.
    EDIT: I have fixed the issue! The problem was I was using an older driver for the JMicron controller when I slipstreamed it into my XP x64 install disc. I had used the newest one when I installed Vista. I'll keep this post here to help out anyone else who has this issue!
    Get the driver!
    Message Edited by stncttr908 on 05-4-2007:32 PM
    Message Edited by stncttr908 on 05-7-20072:3 PM

  • How to make the notification sounds play through EarPods

    The notification sounds/ringer on my iPod touch keeps playing through the external speakers even though I have EarPods plugged in. If I turn on a video of game tho, it will play through the earpods. Is it possible to make the notification sounds play through the EarPods as well?

    Hi Everyone,
    Just in case anyone else runs into this problem here is the solution that i've managed to piece together,
    I have a movie clip twice the size of the stage, the movie clip is called bg_mc, here is my actionscript...
    bg_mc.addEventListener(Event.ENTER_FRAME, mouseMoveHandler);
    function mouseMoveHandler(event):void
    var cursorX = stage.stageWidth - mouseX;
    bg_mc.x -= dx / 5;
    this action script tells the movieclip to move left and right depending on where the users mouse pointer moves. (it also adds a slight delay to make it look like tweening)
    I then published this in Flash using the publish settings shown in the reply above.
    Then i went into dreamweaver and removed the margins in the html file
    Now the flash file will resize to any screen resolution and will allow the user to move the MC left / right across the screen depending on where the mouse pointer is,
    I hope this is helpful,
    Ben

  • When I click on a movie link, the movie sound plays through my telephone instead of my external speakers

    When I click on a movie in Firefox, the sound plays through my Ipevo telephone instead of my external speakers

    You can open the volume control via the icon on the Taskbar and check which Device is used.
    * https://support.mozilla.com/kb/No+sound+in+Firefox

  • Sound playing through both headphones & speakers

    Sound playing through both headphones & speakers at the same time
    please help.
    HP ENVY TouchSmart m7-j020dx Notebook PC (ENERGY STAR)

    Hi,
    Try the following.
    Download the IDT Audio installer on the link below and save it to your Downloads folder.
    http://ftp.hp.com/pub/softpaq/sp63501-64000/sp63555.exe
    When done, open windows Control Panel, open Device Manager and open up Sound, Video and Game Controllers.  Right click the IDT device and select Uninstall - you should also get a prompt to remove the current driver, tick the box to allow this and then proceed with the uninstall.
    When complete, download and reinstall the Chipset driver on the following link.
    http://ftp.hp.com/pub/softpaq/sp63001-63500/sp63408.exe
    When the Chipset driver reinstallation has completed, shut down the notebook, unplug the AC Adapter and then remove the battery.  Hold down the Power button for 30 seconds.  Re-insert the battery and plug in the AC Adapter.
    Tap away at the esc key as you start the notebook to launch the Start-up Menu and then select f10 to enter the bios menu.  Press f9 to load the defaults ( this is sometimes f5, but the menu at the bottom will show the correct key ), use the arrow keys to select 'Yes' and hit enter.  Press f10 to save the setting and again use the arrow keys to select 'Yes' and hit enter.
    Let Windows fully load - it will automatically load an audio driver, but just let this complete.  Then open your Downloads folder, right click on the IDT installer and select 'Run as Administrator' to start the installation.  When this has completed, restart the notebook again before checking.
    Regards,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

  • Skype sounds making my other sounds play through s...

    Whenever a skype sound plays, the sound comes through my headphones. However, let's say I'm listening to music at the same time. The skype sound will cause my music to play through the speakers for the duration of the skype sound. Is there a way to make both the sounds play through my headphones?
    This isn't how it was on my old headphones. My new headphones are Logitech G230's.
    Also, in this image: http://prntscr.com/4adcvz you can see that a sound is playing through the "speakers" while it's actually playing through my headphones. My old headphones had a USB and my new one doesn't, so that might be why.

    I had the same problem, go to sound/playback devices accesible from either control pannel or right-clicking the speaker icon in the bottom-right-hand corner.
    Then play around with disabling/enabling different devices until it works.
    Put on some youtube video or something else that runs for a while, then every time you made a change call Echo/sound testing services

  • Crative Inspire 7.1 w/ Audigy 2 Value - Subwoofer constantly rumbling, whether sound playing or not

    As the message title says, my subwoofer constantly rumbles whether I have sound playing or not. If I don't have sound playing, just the subwoofer rumbles. If I do have sound playing, the sound plays normal, except the subwoofer rumbles OVER the sound. I've tried adjusting every subwoofer option I could find to no avail. The only thing that stops it is completely killing sub woofer volume, and it really sounds like crap without bass Anyone else had this problem? Anyone know a fix? It used to work fine, then this problem started up a few months ago, then it corrected itself, and now its back and I can't fix it...

    If I have understood you right, then I'm afraid you have broken the subwoofer!
    Several months ago, I think it was last year, somewhere in August I encountered this problem with my P580 5.1 speaker system. I was playing with too loud music and the subwoofer couldn't take it. This is were you all people have to pay ATTENTION! Just because the remote says "Level 0" on the bass volume doesn't mean that you may turn both the volum and the bass to the MAX! You will simply break the subwoofer, it cannot handle that kind of pressure. Now, how do you notice that the subwoofer is broken? Well, it may have different sounds on different systems, however my P580 had some kind of "Whhhooooo" sound.
    But don't worry!!! There is always a way through this kind of problems as it is with any other problem you encounter with your speakers. If you have the receipt at your disposal and your garuantee haven't expired then you may always get a new one! But if you haven't got it, then you just contact your customer support, then they will ask you to send your subwoofer to them and they will just send you a new one! It will take a couple of week's but, make sure to contact them and they will send you a new one as soon as they have recieved yours. You need to give them a copy of your receipt, if you haven't got one then send your product number found on the box containing the speaker and all that...

  • Sound playing through speakers and Headphones at the same time...

    Hi everyone, I have a Toshiba Satellite A215 S5849. It is only about 6 months old. Now whenever I plug my headphones into the headphone jack, sound keeps playing through the speakers and in the headphones at the same time. Also the speakers do always have a crackling sound like they are blown. I have been trying to fix it for awhile now but no luck. Any help would be appreciated.

    Hello again, sorry that the driver did NOT resolve the issue. What I suggest we try is the Support Assistant. This will do a scan on your entire computer and if the computer does have a issue it will find it and show you how to resolve the issue. Please click on the following link to get to the download.  http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-110990-1&cc=us&dlc=en&lc=en...
    Thanks again.
    Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    W a t e r b o y 71
    I work on behalf of HP

  • My Macbook Pro wont play sound through Mini DisplayPort to HDMI adapter on toshiba television anymore. The sound plays through sony or samsung television, but not toshiba television.

    I have a Macbook Pro early 2011 running on mountain lion version 10.8.2. A while back, i purchased a mini display port thru HDMI port so i could watch dvds on my toshiba television. it all worked great for a while, then the sound just stopped working. At first, I thought the mini display port connector must have broke, until I plugged it into a sony television and it worked. I also tried using it through a samsung television and it worked just fine. Why does it not work through the toshiba television anymore? The picture works fine, but the sound does not come thru the television anymore. My mac is set to play sound thru the HDMI port and it doesnt. When i switch it to built in internal speakers, the sound comes thru my mac, but when i switch it, no sound comes out. Any help would be greatly appriciated. Thank you!

    I am still waiting to receive a response from them, but i dont think they'll be much help. the television still works fine and all of the ports on the back, including both HDMI ports, work perfectly.

  • Satellite P200 - no sound playing through Panasonic HDTV

    Hi, I recently bought a P200 Notebook, and have tried to play HD DVDs through my Panasonic HDTV, connecting from the notebook's HDMI port to the TV's HDMI port with an HDMI lead, and connecting from the headphone socket on the notebook to the two audio sockets on the back of the TV. However, although the image is fine, no sound is coming through the TV.
    I think I may be overlooking something incredibly obvious, but has anyone got any suggestions as to why no sound is coming from my TV?
    Thanks!

    I've done it
    Open up Control Panel
    Select *<<Sound>>* (Not the Realtek HD Audio Manager)
    Under Devices there will be Digital Output Device (HDMI)
    Right Click and select *<<Set as Default Device>>*
    Hey presto Audio comes blaring out of the TV.
    After Disconnecting, it seemed to stay locked to HDMI Audio despite selecting Speakers as the Default output. I had to disabled HDMI and then reenable it after the speakers were being used as the defaulot device again.
    This may not be the best solution but it works, so I can finally start watching all my BBC IPlayer downloads.
    If anybody has a neater solution that means Audio is automatically switched on connecting and HDMI Monitor please tell me.

  • Sound plays through Matrox MX02 instead of Komplete Audio 6 USB Device =(

    In Adobe Premire Pro CC I can't use my NI Komplete Audio 6 usb device for playback. Instead sound always comes out of my Matrox MX02 when I'm scrubbing or playing.
    Under Preferences -> Audio Hardware -> Default Device I have selected Komplete Audio 6. When I hit ASIO settings it brings up the expected Komplete Audio 6 Control Panel.
    Under Preferences -> Playback -> Audio Device I see options for Adobe DV, Adobe Desktop Audio, and Matrox Player but no Komplete Audio 6.
    My system is a custom built Windows7 PC. Any advice on getting sound out of my Komplete Audio 6 instead of the Matrox MX02 would be much appreciated!

    the komplete audio 6 seems more problematic than expected.
    Preferences -> Audio Hardware -> Default Device -> Premiere Pro WDM Sound causes stuttery playback. I've tried enabling/disableing "Device 32-bit Playback" under ASIO settings and I've also ensured that the buffer size (256 samples) is the same as in my Komplete Audio 6 Control Panel.
    Preferences -> Audio Hardware -> Default Device -> Komplete Audio 6 audio playback is fine but if I alt-tab away from PPCS6 the application will freeze as I describe in this thread: http://forums.adobe.com/message/5412540#5412540 ...
    I'm running the latest driver/control pannel from Native Instruments (3.1.0) and the latest firmware has been flashed to the Komplete Audio 6 (45).

  • Linux 3.2 sound plays through HDMI and laptop speakers simultaneously

    As topic says, laptop speakers is not muted when activating sound through HDMI. Downgrading to 3.1 solves the problem. The laptop is an Asus UL30a.
    Last edited by KlavKalashj (2012-01-20 08:52:49)

    natestar13 wrote:
    Are you using Alsa or PulseAudio to configure your audio settings?  The Arch Wiki has extensive tips for both.  You might need to set a default audio output
    https://wiki.archlinux.org/index.php/Ad … chitecture
    https://wiki.archlinux.org/index.php/Pulseaudio
    I am using Pulse Audio (and KDE). It's all correctly setup, it has been working for several months and it works if I downgrade kernel to 3.1, so it's a regression with the new kernel. Also, if any mods are reading this, maybe thread should be moved since 3.2 is out of testing.
    Edit: It's quite weird. If I go to KDE sound settings and change them around a couple of times, after a while it works like it should. There is no consistency in this and I have no idea how to troubleshoot
    Edit2: Could this be related? I know it's for Nvidia cards, but in the first comment he mentions hda_intel.chttps://bugzilla.kernel.org/show_bug.cgi?id=42567 I should probably have mentioned in the first post that my laptop is all Intel:
    oscar@arch-laptop: [~] >>> lspci | grep Audio
    00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio Controller (rev 03)
    Last edited by KlavKalashj (2012-01-20 18:35:26)

  • ATV 3 has no sound played through pioneer receiver

    Prior to the latest software everything worked fine.
    Now when ever playing a movie from apple tv 3 there is no sound from any HD movie in itunes. These movies have two sound tracks a surround sound and a stereo. The movie starts and there is no sound, i need to go into the sound option for the movie and set it to stereo and resume playing then go back into the sound option and set it to surround and then i get 5.1.
    Any help as to why it will not play straight away would be great.

    -Make sure a case is not covering the speaker.
    -Is your iPhone on mute?
    -try restarting your iPhone or restroing it.

  • No Sound Played Through Ear Phone in Windows

    Hi,
    I installed Mac & Windows on my iMac. I recently found out that In Windwos, I cannot here sound from my earphone when it's pluged in. The sound still comes out from the speakers.
    I do not know if it's the Windows setting. or if I should "download and install bootcamp again"
    Any suggestion is appreiated.
    ED
    null

    The problem is not getting any better.:(
    Ed

  • Presenting on ipad: will the video sound play through external speakers?

    I'm giving a presentation on my iPad, using Keynote. I have always had problems connecting the iPad to the podium in our classrooms (using the connector)--the screen mirrors beautifully, but the sound doesn't get transmitted. There is a speaker jack on the podium that always works with my MacBook, but when I plug it into the iPad2, no sound (except for the iPad's own speakers). Can anyone help? I don't want to have to take my MacBook--but I need sound! Thanks.

    see if this links helps
    http://discussions.apple.com/thread/2420374?start=0&tstart=0

Maybe you are looking for