Audigy 2 ZS Platinum - Channel 3 to 7 resett

I have a Audigy 2 ZS Platinum, and everytime I change the volume through the Creative Volume Control and the remote, my speaker settings channel 0 to 7 will reset to 0, which will kill off my surround sound. It's been happening ever since I downloaded the beta driver (note: I also reinstalled mediasource at this same time because I wanted to get rid of some of the useless plugins I downloaded) but it thought it would be fixed after the official version come out. And I have the newest driver now.
So how do I make it stop resetting channels 0 to 7? It also sets channel 8 at max.
Message Edited by dman3k on 08-05-2008 :43 PMMessage Edited by dman3k on 08-06-2008 09:59 AM

I'm having similar problems...no sound at all from the external I/O box. I can hear system sounds, though. I posted a similar question last week...no replies. This forum seems to have lots of questions, but little in the way of answers.

Similar Messages

  • AUDIGY 2 ZS PLATINUM PRO : 8-Channel (7.1) Playback in WINDVD 6 Platinum doesn't work proper

    Ok here's the deal.
    I have a Audigy 2 ZS Platinum Pro
    Furthermore I own WINDVD 6 PLATINUM (incl. Booster pack) which supports 8 channel audio.
    My speaker system is an analog one. The 8 speaker Creative Inspiron one.. don't know the exact name.
    I just did a clean installation of Windows.
    I am running windows XP Home SP2 with all latest updates.
    Furthermore I installed all Audigy 2 ZS Platinum Pro updates there are.
    Anyways..
    Whenever I switch to 8 channel (7.) playback from within WinDVD only the center and the 2 front channels work. The side (surround) and rear channels aren't working at all!
    I get the same problem when I switch to 7 channel (6.) from within WinDVD.
    When I click on test (in WinDVD) to see if the channels are working.. the test noise only appears in the front and center channels. However once it gets to the rear channel there's nothing.. and at the side left channel there's this quiet odd noise.
    If I switch to 5. (from within WinDVD) mode.. everything is working perfectly... but 5. only..
    I want to take full advantage of my soundcard.. and even though WinDVD supports this soundcard.. it doesn't seem to work.
    Any other application... CUBASE SX2 or games such as Call of Duty work perfectly fine with all channels.
    Can anyone help me?
    Can you recommend any other 8 channel software DVD playback software?
    Thanks
    - Ben
    [email protected]

    first of all your questions ain't stupid...you got to learn/understand once right?
    **bleep** 3 yrs ago i thought i knew digital audio (mp3/wave on PC and Philips DCC recorder) but then came Dolby Digital & hardwaredecoding...LOL... Lots of differences in channelprocessing & so misconfiguration possible.
    Well I hope you didn't uninstall your dvd player software... I mean software audiodecoding like matrixmixer(that you can find in codecpacks, all **bleep** that uses directx this because most of it is max 6bit LOL) ..your talking about all your extra dvd software.(but you don't need their extra audio playing features). Just select the sp-dif audio in WinDVd PowerDVD or NVDVD whateverDVD and then go check the creative soundcard speakersetup(not the windows speakersetup , but prefer to use the creative surroundmixer (click the THX logo/icon under in the creative mixer, and calibrate analog speaker output) etc.
    You only need the player 4 dvd playing acces. (DVD-V DVD-A) (prefer the dvd-player for dvd-A in sp-dif mode because then you'll see that some dvd-A's have some videoclips or images. and do check the site of www.slysoft.com and score it in any way )
    .. by the way don't forget this about your analog output 3.5mm jacks on the back og the card:
    first channel = 3.5mm 3-pole jack (stereo)
    second and third channel = 3.5mm 4-pole jack (stereo portable camera cable works (3xrca).
    so don't use stereo jacks on the 2nd & 3th channel...
    You can use a portable stereo camera cable because the've on one side 3xrca(yellow/white/red) and on the other side a plastic 4-pole minijack (plastic=preferred because you probably need to make the 4-pole jack smaller with a metal file (be careful not to harm the cable) these cable's are standard and so very cheap. standard meter long.
    Final joke: It's nice to have THX@Soundcard + THC@head greetings from a late in the evening Amsterdam NL.Message Edited by www_96KHz_tk on 05-24-2005 08:20 AM

  • Audigy 2 ZS Platinum not decoding A

    I want to use my Audigy 2 ZS Platinum to decode AC-3 signals when I play DVDs. I have done everything the "Digital Connections, SPDIF and Dolby Digital Info" thread. I have verified the SPDIF passthrough is disabled in AudioHQ.. rather.. Use Installed Decoder is enabled. I am using Intervideo WinDVD 5 to play DVDs. In this software I have Digital (S/PDIF) out selected. I'm using the Creative wire harness to connect the analog connections from the audigy to my receiver and I have my receiver setup to use the direct analog inputs. When I play a DVD the dialog is faint and only comes from the front channels. If I tell InterVideo WinDVD 5 to decode instead of using the SPDIF out it sounds exactly like it should. The dialog is very clear and comes from the center channel and the rear channels also produce sound. I don't trust my receiver to decode so that's why I'm not using the digital out instead. It doesn't sound right.. why I bought the Audigy to do the decoding.
    Using InterVideo WinDVD 5 to decode isn't an option for me to use for other reasons. It is a good test to make sure the Audigy is doing what it should. For whatever reason, the Audigy is not decoding the AC-3 signal properly. Does anyone have any thoughts on this? It really blows my mind. This isn't a new concept at all. I didn't expect to have problems with it.
    Cheers,
    Scott

    $$$ I keep throwing money at this computer trying to get audio to work right. The Audigy 2 ZS Platinum was throwing more money at it... I'm not going to keep buying more and more stuff to get the computer to decode an AC3 signal properly. I'm going to see what other people do that works.
    Is there a solution to get the Audigy 2 ZS Platinum to actually decode the AC3 signal?

  • Audigy 2 ZS Platinum- Inspire 4.1 don't see each other after computer move

    ?? Running: Windows XP Pro
    Sound Card: SB Audigy 2 ZS Platinum? Driver Version 2.8
    ? Speakers: Creative Inspire 4. 4400
    ? Software: Creative Media Source 3.30
    I moved my computer to another room and started having sound problems. I removed Creative Media Source 5 ( I had it when I used the creative zen mp3 player ) because I thought it was redundant on my system. My sound is now hollow and tinny. But the truth is I don't know what caused the problem to begin with since the Holidays were involved and many people were at my computer. I only want the sound to be as great as it was before.
    These are my problems:
    . No matter how many times I set the audio properties through the volume control icon on the taskbar, the configuration always resets to desktop stereo speakers instead of surround sound.
    2. Using the Creative Speaker Settings results in information showing that there are only 2 speakers attached and they are synchronized with control panel. Under speaker calibrator it reads that there is a generic speaker system.
    3. Using the calibrator Wizard, only 2 speakers show up.
    4. Normally in the EAX console, the Effects tab shows many settings - but now there is nothing inside the box.
    5. On the CMSS3D tab, the slider for the speakers is grayed out
    6. The THX setup console on the Speaker selection tab there is nothing under the speaker selection tab - There is an analog output and a digital 48khz under digital sampling.
    7. Under calibration there are only left and right front speakers the subwoofer and rear speakers are grayed out
    This is what I have done to troubleshoot my problems:
    . Used Auto update of card which reads that everything is updated. There are no drivers for the speakers, so that is ok.
    2. Through the Creative Organizer I enabled CMSS
    3. Through the Creative Audio console on the Decoder tab, I have checked use built in decoder and under speaker mapping for 4./5 using side channels
    4. Under Dolby digital settings Dynamic Range is Full - Dolby Pro Logic is ON - Dolby Digital EX is ON --- DTS for Es is ON
    5. Made certain all connections are secure and verified the placement of the green and black wires coming from the subwoofer are connected to my computer in the correct place, namely that the black wire is in the second hole from the firewire port and the green wire is in the third hole
    Please help me if you can. I'm ready to throw in the towel, I would even buy digital speakers but don't know which way to turn. I don't know if it's the card or the speakers or the fact that I removed the Media source 5 (for which I can't find the disk.)
    Thanks in advance for reading this and taking the time to troubleshoot with me.
    Jane

    Hello KokChoy-CL.
    Many thanks for your support!
    I've been reinstalled the drivers and changed the options of your link, now the DTS 5. effects are quite working on my xbox.
    Again, thank you!
    Lucio.

  • Audigy 2 ZS Platinum and Stereo PCM

    #Audigy 2 ZS Platinum and Stereo PCM? Hi,
    Have an Audigy 2 ZS Platinum here and I'm having issues with having no audio when inputting Stereo PCM over Optical Toslink. I tried using both default and internal decoder, but no audio at all. It only works when using passthru/bypass mode. Tried a bunch of stereo inputs and had no audio at all. Is Stereo PCM not supported or what here? The test input streams were PCM two channel 48khz 6bit and 20bit. And Dolby Pro Logic is listed in the decoder tab with Auto, On, or Off. But maybe that isn't the same as Dolby Pro Logic II and that is why there is no audio. Only seems to work with Passthru mode only.
    Message Edited by Seraphic on 04-7-2009 03:07 PMMessage Edited by Seraphic on 04-8-2009 0:44 PM

    Hi, is anyone able to offe some help? Thanks

  • Audigy 2 ZS Platinum

    First of all, Hi this is my first post here. I own an Audigy ZS Platinum Pro, an SB Li've, and have been a loyal Creative customer since the Soundblaster 2.0 6bit I fitted to my 386SX. I've been working in I. T. for 3 years in various roles, from C++ programming to IT Management. I'm currently certified as an eMCPA, MCP, MCSA, MCSE, MCSA&MCSE+Messaging, and am about to complete a VCP and soon?a Cisco Unified Messaging cert. I'm far from uninformed, I guess that's what I'm trying to get across. Now some other facts:- Windows Vista has been available to corporate customers since November 2006.- Windows Vista has been available to retail customers since January 2007- Windows Vista SDK including Driver SDKs have been readily available since early 2006. Yes you read that right.
    Now, I like most people downloaded the Audigy 2 ZS Plat Pro drivers for XP and found they didnt work under Vista. Things like the scale of the volume controls was way off - but Surround sound was strangely enough working. I have a full surround sound system with either SPDIF or just RCA inputs. I use either, I'm not that fussed. I could not use these drivers as there were so many bugs under Vista (the XP drivers) that it wasnt workable. I then waited for well over a month. Eventually, Creative release the first beta drivers for the Audigy 2 ZS Plat Pro under Vista 32bit. I install these drivers, and find to my dismay, everything sounds absolutely terrible (I'm not sure how the quality can be so bad?) and also the rear channels won't work. No SoundBlaster applications are installed. It's like I'm using the worst onboard sound ever invented with the world's worst driver and application support. At this point I'll remind you?I paid over $450 for this card and external box. That is a massi've expense and one I only outlayed due to my previous faith in Creative. I already had my suspicions about the quality of the drivers due to the way the previous XP drivers had been bundled into 3 files then a patch and then that was changed, and it was all very seemingly mismanaged. Anyway the drivers bomb out without warning on January 2th, which I was very much less than impressed with.When I first hit the Creative site that morning, the updated drivers were NOT available. That is absolutely unacceptable. Later that day, the current drivers were posted. With massi've warning labels like "THESE ARE AN UNSUPPORTED BETA DRIVER. DO NOT USE THESE....<continues like this>" I download these and install them, and find to my dismay CMSS might be present but it's implementation is very very poor and I'm getting truly abysmal quality through the rear channel. It's like somebody ripped the DAC out and replaced it with one they bought from a 25cent bargain warehouse. I then change volume settings and attempt to use some of the features of the card and find that practically nothing that is present in the XP drivers is actually working in these drivers. There is no point using these drivers other than to hear Windows sounds. They are buggy, suffer from massi've quality problems, and do not include any of the features that I bought the card FOR and also cripple my home stereo/theater sound reproduction to the point it's not worth bothering with. So thanks, Creative, for because of your drivers alone, I'm now dual booting to XP and having to wait to actually begin using a new operating system, for absolutely no reason other than the incompetence displayed by Creative. Not anyone elses, the Video card has been working fine since Vista Beta , and every single other device in my system including USB sticks and third party disk controllers, all work great under Vista. Every single, and I mean every single, one of these other manufacturers had a software team that was worthy of the hardware. I'm afraid that I can't say the same for Creative Labs. The software is truly terrible now, you need to fix this situation. In closing, let me also remind you that it is now the 2st of February, 2007. These unsupported beta drivers have been my only option for well over a month. Prior to this drivers that were barely alpha release drivers were my only option, and prior to that - I had no option. This is completely unacceptable. Microsoft did not just spring Vista on the market; SDKs were made available 2 months in advance and even futher in advance for hardware vendors. Please stop blaming Microsoft or implying it is their fault for implementing DRM. This was documented, published, warned about in advance, and any software or hardware manufacturers caught behind the 8 ball like this should be truly ashamed, and fully expect to lose the vast majority of their Enterprise level customers, which filters down to the IT Media, which filters very quickly down tos Consumers. Once your products are recommended AGAINST, on major websites and in major IT publications, the retail customer will no longer select Creative. Do not be complacent, it will happen if nothing changes and extremely rapidly. This will take a long time for the user base to forget too, we will be suspicious and never trust Creative for many years. Neither I, nor my businesses, will ever buy a PC with a Creative component in it again, and I have written to local Computer publications stating the same. I am removing my Creative hardware from the systems, and will move to another high end manufacturer that does have current Vista drivers. Believe me people there are cards out there with better SNR and all of the features and more, with driver support. This shows a real lack of commitment to the customer base on behalf of Creative. This post is not intended to start a debate. It is a letter from myself, and my?local I. T. community, to Creative, for comment on by the community. Everyone should realise that the software development lifecycle for a modern I. T. hardware vendor needs to be tracked closely to the operating system vendors' releases and patch levels. Creative, are not behaving with any professionalism. This is not an operating system being delayed, this is a driver, the tools for which have been made readily available to Creative by Microsoft directly for over 2 months, Creative manufacture the hardware, and to add insult to injury Microsoft worked with hundreds of hardware vendors to ensure Vista compatibility. For the Creative Vista drivers to be in this state of disarray on February 2st 2007 is a terrible reflection on Creative, showing a massi've lack of planning. Pardon me for asking, but is everyone at Creative asleep?On behalf of the I. T. Community at large, I hope Creative acknowledges our disgust.?Travis RoeMessage Edited by troe on 02-20-200709:52 PM

    Well so far this only Issue Im having with my my Audigy 2 ZS Platinum Pro drivers , it's the sound is Crappy, but to be honest, it look like a performance Issue , cause if im not in a game the sound is quite better, but as soon I've let my music play during a game, the Sound Goes to So So to BullS**T. Im in IT since a long time, I won't tell all my degree and so but..! Im a pro..!?While Running Game my Sound card decrease my performance. And sometime I need to restart cause Cracking noise get over the game. I can be 2 Weeks without restart Needed...!If there any Beta Drivers Available I would like to be on trials...!BTW IM not just blaming Creative for Drivers and Issues, developing Drivers under Vista is Really new,Hardware layer are really not the same as all windows OS..! So keep up the good Work Guys..!We can blame Bill and is friend to have create a New Layer :P but I won't cause in year, everything will be Perfect..! now it's just too new ?Thanks,?here is my Spec. AM2?DualCore 4800 +4 gig Ram DDR2 800 Mhz OCzAsus CrossHair MotherBoard.5Tera in SATA RAID WDAsus 7800 GTX GeforceAudigy 2 ZS Platinum ProRunning under Vista Ultimate ( Registered with Real Info, Im a MSDN Subscriber + MCP )??

  • SB Audigy 2 ZS Platinum Pro stutter during DVD playb

    I've just recently installed the SB Audigy 2 ZS Platinum Pro into my PVR. I am connecting to my stereo system via the SPDIF connector using a coax cable. I've set, via AudioHQ, to pass through any Dobly Digital and DTS signals to my amp therefore the Audigy card is doing no decoding of any kind for digital signals.
    The player I'm using is the latest VideoLAN player available (v0.8.4a) and have also set the player to use SPDIF output. When I try to playback my DVD's using VLC, the audio stutters constantly. I know it's not a DVD problem because when I switch the player back to normal stereo, the audio comes through fine.
    My amp also detects the signal properly as it goes from Dolby Pro Logic to either Dolby Digital or DTS depending on which audio track I use from the DVD.
    My system has a P4 3.0GHz CPU, GB RAM, 200GB HD (partitioned 0GB for OS, ~80GB for PVR recording, 0GB swap), with XP SP2. My swap is system managed and the OS has set it to ~.5GB.
    Has anyone experienced the same or similar problem? Any help would be appreciated as I've banged my head against the wall all weekend long trying to figure this out.
    TIA...

    I have absolutely same problem.
    I use Audigy 2 Platinum.
    Operation System:
    Win XP Pro 32bit
    Driver:
    Creative Sound Blaster Audigy series Driver v.2.8.000
    Applications:
    Creative MediaSource Player-Organizer v.3.30.2
    Creative MediaSource Plugin for Remote Control v.2.30.02
    I use 5. configurations of speakers.
    When, I use remote controller to adjust volume.
    Front left and right channels working correctly.
    Center, Low Frequency and Back Left channels apply max high volume level and don t apply any other volume levels.
    Back Right channel apply max low volume level and don t apply any others volume levels.

  • Audigy 2 ZS Platinum Pro - GigaWorks 7.1 - Tracktor DJ Studio - Setup help ple

    I am trying to work out the best way to configure the following components so I can mix 2 tunes - listen to the mix on one channel and the incoming song on the headphones.
    SoundBlaster Audigy 2 ZS Platinum Pro
    GigaWorks 7.
    Tracktor DJ Studio
    Currently with the Gigaworks connected to the Audigy and the headphones connected into the External IO Hub - selecting any combination of channels in Traktor to become master or headphone yields all tunes being played through speakers and headphones.
    Reading the spec on the Audigy it appears I can use Line out on the soundcard itself to connect the headphones direct - but with the Gigaworks requiring all 3 line outs - how should i then best connect the speakers?
    The Traktor instructions indicate that this config is possible using a multichannel soundcard - which this is.
    I've attempted config in Traktor using all of the following Audio Devices:-
    SB Audigy 2 ZS ASIO [ECCO]
    SB Audigy 2 ZS ASIO 24/96 [ECCO]
    Creative ASIO
    DS SB Audigy 2 ZS Audio [ ECCO]
    No luck with any of them.
    Im obviously not understanding something - and im sure im not the first person to attempt this.
    Any help appreciated.
    Regards
    Simon

    I think what you're missing is that the headphone out is really connected to the same signal as the front speakers out. The assumption is that you're either going to be listening to the headphones or to the speakers. Tracktor can probably use the soundcard channels independently, but anything directed to the headphones also goes to the front speaker output. I believe you can set things up so plugging in the headphones will mute the speakers, but that doesn't help the front speakers play a different signal than the headphones.
    I don't think there's a connection setup which you can use both for Tractor and for 7. listening. You can probably get Tractor to send the output you want to hear on your headphones to line out 2 and the mixed signal to line out . That would mean connecting the headphones to what is normally the surround left/right output, which you'd need to disconnect from the speakers while you're doing this.
    If you end up trying to rig up switching to help you go back and forth, using 4 Sony-type camcorder cables for line out 2 and 3, and 2 stereo minijack to RCA cables will probabably be helpful because it will be a lot easier to get RCA-connector switching than 4-pole minijack switching.
    -Dave
    [email protected]

  • Audigy 2 ZS Platinum Pro and Vista 64

    I just built a new computer system?and am trying to get my Audigy 2 ZS Platinum Pro to work in my new system. I am running 64 bit Vista?on an ASUS P5E-V HDMI motherboard with 4 GHz of memory and an intel Quad Core Processor. I have downloaded the Vista drivers, but I cannot get everything to work properly. My THX console, speaker setting console and others will no longer work. I am getting sound only through the front left and front right speakers. My subwoofer, center channel and right rear and left rear spekaers will not work. I have confirmed that analog 5. has been selected and that digital is not checked. I am at a loss as to what to do next. I have Logitech THX Z-5300e 5. speaker system. Please help!

    Is there no one out there that can help?

  • Voice-processor on Audigy 2 ZS Platinum

    Hi there!
    My condenser-mic is connected to a voice-processor. I have to connect the processor to an input of my Audigy 2 ZS Platinum-Bay. Which one I have to take? The line-1/mic or line2? When I connect to line2 I only have sound thru the left speaker. When connected to line1/mic, the same problem. It works only when the mic-volume on the bay is activated.
    What goes wrong and why do I have only sound on one channel when put the processor in a line-input?
    Thanks,
    Danny.

    I'm not exactly sure if i'm right, but I can offer a guess...
    It sounds to me as if your vocal processor is sending a mono signal. The Line-In inputs on every SoundBlaster that I have used are stereo. Now, by your problem description I think I can safely assume that you are using a TS cable to connect your vocal processor to your Audigy? (I'm assuming Ts, though the problem might happen with TRS... this is where I am unsure... see below). The problem is, the line input is expecting a balanced or stereo signal, and it is receiving input only for one channel. When you enable the mic volume, it changes the input to a mono input, therefore allowing your sound to come through both left and right speakers.
    Your vocal processor should say something about being balanced or unbalanced. If it is unbalanced, you will probably want to get something like a DI-Box or another unbalanced to balanced adaptor. If it IS sending balanced signal, then make sure the cable you are using is TRS (it will have on the end 3 sections of metal (tip, ring, sleeve), instead of just two). This will allow the signal to travel to both left and right channels. (A TS cable will connect the right channel to ground.)
    If your vocal processor is sending balanced signal, AND it is using a TRS cable, then I would assume your cable is broken.

  • Audigy 2 ZS Platinum: Optical cable doesn't recognize DTS 5.1 on Vista

    Hello!
    This is my first trheat, where I've been search other discussions about this subject, but noyone helpt me.
    I have a Inspire 7. switched on a Audigy 2 ZS Platinum, that has a IO-DIN to connect external features (see here: http://images.americas.creative.com/...large/4659.png)
    Then, I used it to play guitar without problem. But, now I want to switch on my Xbox 360 with optical cable, but it is working only stereo way. When I switch to 5., occrus a?BIP and the sound stay mute.
    My doubt is: the optical in recognize only stereo sounds? How can I get 5. sounds on my xbox 360?
    OBS: The sounds effects on Windows games?and DTS movies are perfect on 5. channels. The problem is concentrad on optical cable only.
    PC configuration:
    Q6600
    6 Gb RAM
    video card nvidia 8800GTS
    Windows Vista 64 bits
    Creative last driver (SBAX_PCDRV_LB_2_8_000.exe )
    Inspire 7.

    Hello KokChoy-CL.
    Many thanks for your support!
    I've been reinstalled the drivers and changed the options of your link, now the DTS 5. effects are quite working on my xbox.
    Again, thank you!
    Lucio.

  • Capturing laserdisc AC3 signal with Sound Blaster Audigy 2 ZS Platinum

    I'm considering converting my laserdisc collection over to DVD.
    As far as PC hadware is concerned, I have the ATI All-In-Wonder 9800 Pro and the Sound Blaster Audigy 2 ZS Platinum Pro.
    My system in a 3.2G P4 on a Intel D875PBZ board w/ 2Gig of memory. Connected are 3 dri'ves, (2) 250G SATA dri'ves and () old 250G IDE dri've that I keep archi'ves on.
    The laserdisc player has the following:
    AC-3 Bit Stream / PCM Optical Output AC-3 Bit Stream / PCM Coaxial Output PCM Coaxial Output
    I was planning to use the optical input of the soundcard but was unsure what to use to capture the digital stream to capture the entire surround channel info. Normally audio is captured as an uncompressed WAV and then converted to AC3 which to me is a wasted step since it's only going to wind up as AC3 again
    I've used Virtual dub in the past to capture TV broadcasts, but I seem to be at a loss on this current venture. Any assistance will be great

    Alright, let me just double check...
    As long as the output from my laserdisc is 48K then things should work fine and I should receive the entire unadulterated stream, no data padding or modification. If it's not 48k then it won't. This is as long as I save it as 2. PCM audio stream
    The audiobitrate for AC3 should be at 384k, and this will be preserved using the above method?
    From what I'm reading, this unprocessed stream should sound like white noise. Once processed by cooledit , Soundforge or besweet I should have the DD 5. soundtrack intact and not a 2 channel AC stream?
    Sorry if I am rephrasing things but I just want to be absolutly certain when I start this project .
    Message Edited by madmax66 on -6-2004 02:40 AM

  • Digital output for SB Audigy 2 ZS Platinum Prob

    I am trying to connect SB Audigy 2 ZS Platinum to my Amplifier (Sony DVP-NS92V) via the SPDIF coaxial digital connection (I have also tried the digital output at the rear panel), unfortunitely the output i got is only on the left and right front speakers. I am currently having a 7. channel surround system. I have clicked both the dital output only under speaker settings and advanced control for play control, and I have also?tried by using both DTS and THX media file, but still does not work. Can anybody help ?

    With a digital connection (optical or coaxial SPDIF) that is normal. Check this sticky thread for more info:
    http://forums.creative.com/creativel...message.id=270
    Cat

  • SB Audigy 2 ZS Platinum Front Pa

    Hi there, I have recently purchased a SB Audigy 2 ZS Platinum sound card. I am experiencing problems with the platinum dri've. It has power, but only the firewire is working. When I try to connect my guitar to the line-in 2, or headphones to their jacks nothing happens. Also, in my volume control there isn't a Line-in 2 option. It would be much appreciated if you could help me with this problem... thanks

    So, you're saying the surround L/R channels are working? I think we need to know what you're using for speakers. I would suggest swapping some of the cabling around and seeing what results you get from the speaker test. This will often give big clues as to whether the problem is in the speaker system, the soundcard, or the cables.
    -Dave
    [email protected]

  • SB Audigy 2 ZS Platinum Pro RemoteControl Problem

    SB Audigy 2 ZS Platinum Pro RemoteControl Problem] Hello everybody,
    i have the following problem with my Audigy 2 ZS Platinum Pro:
    BS: Windows XP x64 SP2
    Driver-Version: 2.8.000 (PCDRV_LB_2_8_000
    All works fine exept one thing, everytime I use my remotecontrol to adjust the volume the system loses the original configuration of the Channels.
    When I view the settings, the Channel and 2 are correct but all others are asyncron. When?I reset the settings to standard then all is correct again until I use the remotecontroll again.
    [url="http://www.bilder-space.de/show.php?file=02.06W4cdSxH7zgBIZmJ.JPG">Bevore RC Use[/url]
    [url="http://www.bilder-space.de/show.php?file=02.069rNl8j665xFRdxu.JPG">After BC Use[/url]
    Anyone an Idea?
    <img border="0" width="" src="http://www.bilder-space.de/show.php?file=02.06W4cdSxH7zgBIZmJ.JPG" height="">
    I hope anyone can help me
    <img align="left" width="[/img] src="http://www.bilder-space.de/show.php?file=02.06W4cdSxH7zgBIZmJ.JPG" alt="before" height="">

    I have absolutely same problem.
    I use Audigy 2 Platinum.
    Operation System:
    Win XP Pro 32bit
    Driver:
    Creative Sound Blaster Audigy series Driver v.2.8.000
    Applications:
    Creative MediaSource Player-Organizer v.3.30.2
    Creative MediaSource Plugin for Remote Control v.2.30.02
    I use 5. configurations of speakers.
    When, I use remote controller to adjust volume.
    Front left and right channels working correctly.
    Center, Low Frequency and Back Left channels apply max high volume level and don t apply any other volume levels.
    Back Right channel apply max low volume level and don t apply any others volume levels.

Maybe you are looking for