AUDIGY 2 ZS PLATINUM PRO : 8-Channel (7.1) Playback in WINDVD 6 Platinum doesn't work proper

Ok here's the deal.
I have a Audigy 2 ZS Platinum Pro
Furthermore I own WINDVD 6 PLATINUM (incl. Booster pack) which supports 8 channel audio.
My speaker system is an analog one. The 8 speaker Creative Inspiron one.. don't know the exact name.
I just did a clean installation of Windows.
I am running windows XP Home SP2 with all latest updates.
Furthermore I installed all Audigy 2 ZS Platinum Pro updates there are.
Anyways..
Whenever I switch to 8 channel (7.) playback from within WinDVD only the center and the 2 front channels work. The side (surround) and rear channels aren't working at all!
I get the same problem when I switch to 7 channel (6.) from within WinDVD.
When I click on test (in WinDVD) to see if the channels are working.. the test noise only appears in the front and center channels. However once it gets to the rear channel there's nothing.. and at the side left channel there's this quiet odd noise.
If I switch to 5. (from within WinDVD) mode.. everything is working perfectly... but 5. only..
I want to take full advantage of my soundcard.. and even though WinDVD supports this soundcard.. it doesn't seem to work.
Any other application... CUBASE SX2 or games such as Call of Duty work perfectly fine with all channels.
Can anyone help me?
Can you recommend any other 8 channel software DVD playback software?
Thanks
- Ben
[email protected]

first of all your questions ain't stupid...you got to learn/understand once right?
**bleep** 3 yrs ago i thought i knew digital audio (mp3/wave on PC and Philips DCC recorder) but then came Dolby Digital & hardwaredecoding...LOL... Lots of differences in channelprocessing & so misconfiguration possible.
Well I hope you didn't uninstall your dvd player software... I mean software audiodecoding like matrixmixer(that you can find in codecpacks, all **bleep** that uses directx this because most of it is max 6bit LOL) ..your talking about all your extra dvd software.(but you don't need their extra audio playing features). Just select the sp-dif audio in WinDVd PowerDVD or NVDVD whateverDVD and then go check the creative soundcard speakersetup(not the windows speakersetup , but prefer to use the creative surroundmixer (click the THX logo/icon under in the creative mixer, and calibrate analog speaker output) etc.
You only need the player 4 dvd playing acces. (DVD-V DVD-A) (prefer the dvd-player for dvd-A in sp-dif mode because then you'll see that some dvd-A's have some videoclips or images. and do check the site of www.slysoft.com and score it in any way )
.. by the way don't forget this about your analog output 3.5mm jacks on the back og the card:
first channel = 3.5mm 3-pole jack (stereo)
second and third channel = 3.5mm 4-pole jack (stereo portable camera cable works (3xrca).
so don't use stereo jacks on the 2nd & 3th channel...
You can use a portable stereo camera cable because the've on one side 3xrca(yellow/white/red) and on the other side a plastic 4-pole minijack (plastic=preferred because you probably need to make the 4-pole jack smaller with a metal file (be careful not to harm the cable) these cable's are standard and so very cheap. standard meter long.
Final joke: It's nice to have THX@Soundcard + THC@head greetings from a late in the evening Amsterdam NL.Message Edited by www_96KHz_tk on 05-24-2005 08:20 AM

Similar Messages

Logic pro x native instrument issue: the vintage B3 organ doesn't work at all!

I installed logic pro x, and the vintage B3 organ doesn't work at all! Oddest thing? Help?
Yes, the little blue power "button" is pressed in the window for the organ.
Yes, my other instruments seem to be working just fine...

OK, I solved my problem - I don't know why I didn't see the other responses on this earlier. Turns out the midi output has to be set to channel 1....

Satellite PRO A200-1S1 with Windows 7 x32. Touchpad doesn't work

Hi everybody
I Installed Windows 7 on my Satellite Pro A200-1S1, retrieved all the drivers on Toshiba site, everything works fine (less than the web camera that didn't work even with previous s.o. XP or Vista...). But my Touchpad doesn't work at all.... No Fn+F9, no driver, nothing works. And in my control panel-device manager seems to be everything ok.
Any suggestion?

Hi
Never had any problems with the touchpad using Win 7 32bit.
I recommend installing VAP (value added package) and Flash Card Support Utility to get the FN button functionality. Then you could try FN + F9
Both tools can be downloaded from Toshiba European driver page there you should choose Sat L500 series because I didnt find mentioned Win 7 software for A200 series.
Check also the touchpad drivers which I found in L500 download area (Alps a Synaptics)
<img src='http://img510.imageshack.us/img510/5830/capturelxz.jpg' border='0' width='550px'/>

Macbook Pro recent update to Snow Leopard now disc drive doesn't work??

I just updated my Macbook Pro to Snow Leopard 10.6.8 now my disc drive won't work at all! I've read a couple forums here that show everyone had this problem back in 2009 when I guess this first came out...great. How do I fix this? It appears to be a software issue. If I upgrade to mavericks will this fix it? Although I also see that makes your computer very slow! Ugh I need help please!

Two things to try:
1. SMC reset, Directions are here - note the steps are different depending on whether or not the battery can be removed by the user:
http://support.apple.com/kb/ht3964
2. NVRAM / PRAM reset:
http://support.apple.com/kb/ht1379
These steps are worth trying, although the problem may be deeper.
Please post back with your results.

Why can't I use the touch pad on my MacBook Pro to zoom or shrink? Two finger pinch doesn't work.

My touchpad is set to do this but it works in OS X 7 the same as in snow leopard (with a couple of exceptions).

Yeah, that's what I ended up doing. It just wasn't worth the hassle. I got a good (standard size) monitor for about half the price of the old one, so I'm not too disappointed. Thanks for your help though

Searching for a software to control temp of my macbook pro retina late 2013. SMSFanControl 2.2.2 doesn't work. THX

Hi,
All is in the title,
Need a good Software who sho me live Temperature of the CPU at least.
I usually use SMCFanControl but the last version does'nt work on new rMBP with Mavericks.
THX

Download istat menus:
http://bjango.com/mac/istatmenus/
Ciao.

Soundblaster Audigy 2 ZS Platinum Pro Freezing Prob

Hello, i am using a Creative Audigy 2 ZS Platinum Pro soundcard and whilst in playback my computer keeps freezing. I have used different software to see if it was that but both freeze in playback. I use media source and windows media player. I have Used Ad-Aware to remove any spyware and antivirus software to clarify there is not viral threat conflicting with my soundcard.
I use usb for a USB internet connection and the other for a plug and play USB Midi controller. Could this be interfering?
My computer specs are.
Windows XP Pro
2.0GHZ athlon XP
768 MB ram
60 gig HDD
64 MB graphics card
I did not have this problem before and has suddenly started happening. I hgave tried reinstalling software etc but the problem still occurs.
Please Help
Many Thanks

Thanks for this answere, but it is the wrong one, i need this one:
http://www.picupload.net/t-bfdbe8aca930c09d294905088c6c26df.jpgMessage Edited by BigDL on -24-200709:43 AM

Using Platinum Voicemaster Pro Vocal Channel Strip with Logic Pro & MBox 3

Hiya,
I was wondering if you can help me please.
I have a small little home studio that I am currently building (just to record vocals mainly to instrumentals as I am singer/songwriter).
I am currently using Logic Pro 9 and MBOX Mini 3 as my midi interface but my producer who is based overseas told me to get a preamp. Many musicians have suggested I purchase Platinum Voicemaster Pro Vocal Channel Strip. CAN ANY CONFIRM WHETHER THIS WILL WORK WITH LOGIC PRO 9 AND GIVE ANY ADVICE AS TO HOW IS THE BEST WAY TO USE IT WITH LOGIC PRO 9 AND MY MBOX MINI 3?
THANK YOU SO MUCH FOR YOUR HELP.
RUSHELLA
X

Thank you both for your input. I am back on the case again, this time with a fully functioning FCB1010. Right ou of the box the pedal does successfully send volume and pan with expression pedal a and b respectively.
What I would next like to accomplish is to have exp. ped. b now control a plug-in parameter instead, the pedal range on the fuzz-wah plug-in of Logic Pro 7 for expample.
When I use Automation Quick Access to edit the assignment of ped. b as Bryan suggested, Logic appears to be receiving the info from ped. b and creating the new assignment (as indicated in the Controller Assignments window), and yet the actual functionality doesn't change, that is, ped. b continues to control pan.
Any suggestions?
Best regards, Dan
Dual 2 GHz PowerPC G5 Mac OS X (10.4.8)

SB Audigy 2 ZS Platinum Pro stutter during DVD playb

I've just recently installed the SB Audigy 2 ZS Platinum Pro into my PVR. I am connecting to my stereo system via the SPDIF connector using a coax cable. I've set, via AudioHQ, to pass through any Dobly Digital and DTS signals to my amp therefore the Audigy card is doing no decoding of any kind for digital signals.
The player I'm using is the latest VideoLAN player available (v0.8.4a) and have also set the player to use SPDIF output. When I try to playback my DVD's using VLC, the audio stutters constantly. I know it's not a DVD problem because when I switch the player back to normal stereo, the audio comes through fine.
My amp also detects the signal properly as it goes from Dolby Pro Logic to either Dolby Digital or DTS depending on which audio track I use from the DVD.
My system has a P4 3.0GHz CPU, GB RAM, 200GB HD (partitioned 0GB for OS, ~80GB for PVR recording, 0GB swap), with XP SP2. My swap is system managed and the OS has set it to ~.5GB.
Has anyone experienced the same or similar problem? Any help would be appreciated as I've banged my head against the wall all weekend long trying to figure this out.
TIA...

I have absolutely same problem.
I use Audigy 2 Platinum.
Operation System:
Win XP Pro 32bit
Driver:
Creative Sound Blaster Audigy series Driver v.2.8.000
Applications:
Creative MediaSource Player-Organizer v.3.30.2
Creative MediaSource Plugin for Remote Control v.2.30.02
I use 5. configurations of speakers.
When, I use remote controller to adjust volume.
Front left and right channels working correctly.
Center, Low Frequency and Back Left channels apply max high volume level and don t apply any other volume levels.
Back Right channel apply max low volume level and don t apply any others volume levels.

Audigy 2 ZS Platinum Pro - GigaWorks 7.1 - Tracktor DJ Studio - Setup help ple

I am trying to work out the best way to configure the following components so I can mix 2 tunes - listen to the mix on one channel and the incoming song on the headphones.
SoundBlaster Audigy 2 ZS Platinum Pro
GigaWorks 7.
Tracktor DJ Studio
Currently with the Gigaworks connected to the Audigy and the headphones connected into the External IO Hub - selecting any combination of channels in Traktor to become master or headphone yields all tunes being played through speakers and headphones.
Reading the spec on the Audigy it appears I can use Line out on the soundcard itself to connect the headphones direct - but with the Gigaworks requiring all 3 line outs - how should i then best connect the speakers?
The Traktor instructions indicate that this config is possible using a multichannel soundcard - which this is.
I've attempted config in Traktor using all of the following Audio Devices:-
SB Audigy 2 ZS ASIO [ECCO]
SB Audigy 2 ZS ASIO 24/96 [ECCO]
Creative ASIO
DS SB Audigy 2 ZS Audio [ ECCO]
No luck with any of them.
Im obviously not understanding something - and im sure im not the first person to attempt this.
Any help appreciated.
Regards
Simon

I think what you're missing is that the headphone out is really connected to the same signal as the front speakers out. The assumption is that you're either going to be listening to the headphones or to the speakers. Tracktor can probably use the soundcard channels independently, but anything directed to the headphones also goes to the front speaker output. I believe you can set things up so plugging in the headphones will mute the speakers, but that doesn't help the front speakers play a different signal than the headphones.
I don't think there's a connection setup which you can use both for Tractor and for 7. listening. You can probably get Tractor to send the output you want to hear on your headphones to line out 2 and the mixed signal to line out . That would mean connecting the headphones to what is normally the surround left/right output, which you'd need to disconnect from the speakers while you're doing this.
If you end up trying to rig up switching to help you go back and forth, using 4 Sony-type camcorder cables for line out 2 and 3, and 2 stereo minijack to RCA cables will probabably be helpful because it will be a lot easier to get RCA-connector switching than 4-pole minijack switching.
-Dave
[email protected]

Audigy 2 ZS Platinum Pro and Vista 64

I just built a new computer system?and am trying to get my Audigy 2 ZS Platinum Pro to work in my new system. I am running 64 bit Vista?on an ASUS P5E-V HDMI motherboard with 4 GHz of memory and an intel Quad Core Processor. I have downloaded the Vista drivers, but I cannot get everything to work properly. My THX console, speaker setting console and others will no longer work. I am getting sound only through the front left and front right speakers. My subwoofer, center channel and right rear and left rear spekaers will not work. I have confirmed that analog 5. has been selected and that digital is not checked. I am at a loss as to what to do next. I have Logitech THX Z-5300e 5. speaker system. Please help!

Is there no one out there that can help?

SB Audigy 2 ZS Platinum Pro: USB-Headset dont w

I have the Soundblaste Audigy2 ZS Platinum Pro and want to use an 5. USB Headset or an USB-Freespeaker(? ... "Freisprecheinrichtung").
But it dont Work. On another Computer i have a Soundblaster Audigy and the USB-Headset or Speaker works great, but i dont need them on it.
Does anybody Know, what to do that Periphery with integrated USB-Soundcards works with an ZS Platinum Pro?
You can answer in German, if you can
Thanks for Help

I have absolutely same problem.
I use Audigy 2 Platinum.
Operation System:
Win XP Pro 32bit
Driver:
Creative Sound Blaster Audigy series Driver v.2.8.000
Applications:
Creative MediaSource Player-Organizer v.3.30.2
Creative MediaSource Plugin for Remote Control v.2.30.02
I use 5. configurations of speakers.
When, I use remote controller to adjust volume.
Front left and right channels working correctly.
Center, Low Frequency and Back Left channels apply max high volume level and don t apply any other volume levels.
Back Right channel apply max low volume level and don t apply any others volume levels.

SB Audigy 2 ZS Platinum Pro RemoteControl Problem

SB Audigy 2 ZS Platinum Pro RemoteControl Problem] Hello everybody,
i have the following problem with my Audigy 2 ZS Platinum Pro:
BS: Windows XP x64 SP2
Driver-Version: 2.8.000 (PCDRV_LB_2_8_000
All works fine exept one thing, everytime I use my remotecontrol to adjust the volume the system loses the original configuration of the Channels.
When I view the settings, the Channel and 2 are correct but all others are asyncron. When?I reset the settings to standard then all is correct again until I use the remotecontroll again.
[url="http://www.bilder-space.de/show.php?file=02.06W4cdSxH7zgBIZmJ.JPG">Bevore RC Use[/url]
[url="http://www.bilder-space.de/show.php?file=02.069rNl8j665xFRdxu.JPG">After BC Use[/url]
Anyone an Idea?
<img border="0" width="" src="http://www.bilder-space.de/show.php?file=02.06W4cdSxH7zgBIZmJ.JPG" height="">
I hope anyone can help me
<img align="left" width="[/img] src="http://www.bilder-space.de/show.php?file=02.06W4cdSxH7zgBIZmJ.JPG" alt="before" height="">

I have absolutely same problem.
I use Audigy 2 Platinum.
Operation System:
Win XP Pro 32bit
Driver:
Creative Sound Blaster Audigy series Driver v.2.8.000
Applications:
Creative MediaSource Player-Organizer v.3.30.2
Creative MediaSource Plugin for Remote Control v.2.30.02
I use 5. configurations of speakers.
When, I use remote controller to adjust volume.
Front left and right channels working correctly.
Center, Low Frequency and Back Left channels apply max high volume level and don t apply any other volume levels.
Back Right channel apply max low volume level and don t apply any others volume levels.

Audigy 2 zs platinum pro MIC-IN measures 2 different resistanc

First post for me so I want to say hello to all.
ok i have the audigy 2 zs platinum pro and i am connecting the supplied /8" to /4" adapter into the MIC-IN/LINE- Jack.
i have a /8" stereo jack plugged into that and on the other end is a white and red rca male connectors.
when i measure the white connector i get 340ohms and when i measure the red connector i get 725ohms...
im just wondering what is going on here...
when i measure the resistance on my el-cheapo computer mics....(you know the kind that are like $4.99 and have a base with a long arm....on its stereo /8" male jack it measures 000ohms when ohm meter is connected to its ground ring (and both the tip or center ring)
so im wondering what kind of ill effect this will produce if i connect that computers stereo mic connector into the supplied /8" to /4" stereo adapter and select record from both channels stereo and 2 at same time (on that MIC-IN jack with the Gain turned to "ON" since i measured TWO DIFFERENT resistances mentioned above.

one more thing
if i turn the mic gain to OFF so it is just in LINE-IN mode when i measure the L channel (the white rca = 2.5kohms) and (the red rca = 26kohms)
note im still using my 2 rca to /8" cable and then hooking that to the supplied /8" to /4" adapter and insert the adapter into the line-in /mic-in jack
?if i do the same test with LINE-IN 2 i get 00Kohms on the left channel (white rca) and on the right channel (red rca) i get 600Kohm and it climbs fast.
WHAT IS GOING ON!

[Audigy 2 ZS Platinum Pro] need h

i got myself a nice old Audigy 2 ZS Platinum Pro from a friend.
but as i hear i have several options as for what drivers to use.
official driver - http://kxproject.lugosoft.com/
i think i know there are others as well
what should i do?
as some ppl will say there is http://forums.creative.com/creativelabs/board/message?board.id=soundblaster&thread.id=46767
but
!!! it says
[color="#ff0000"]"Creative Audigy 2 ZS ( non Pro ) owners" [color="#000000"]thats kind of killing the point with my card.
how should i install and work with my brand "new"? Audigy 2 ZS Platinum Pro.
i want to work this point out before installing it's

I'd give you a stereo adapter, too, since you might want to use the port as line-in. However, you may not be aware that a mono /4" plug fits in a "stereo" /4" jack. The mono plug has no ring, but it has a longer sleeve, which means that the ring contact and the sleeve contact in the jack get connected together, in that case. The same thing is true of /8" plugs and jacks, so the more general /8" female to /4" male adapter is the "stereo,"? three-contact version. If you plug a mono plug into a stereo input, you will ground the right-channel input, which means you will get the left channel, but the right channel signal will be 0 volts and will end up silent. If I were to design a dual-purpose line/mic jack, I'd have to use a stereo jack, but I could switch what I do with the input signals, ignoring the right channel in mic mode, running the left signal through a mic preamp circuit, and sending the preamp output to both channels, so the mic signal is panned to the middle of the stereo field, instead of hard left.
-Dave
?[email protected]

AUDIGY 2 ZS PLATINUM PRO : 8-Channel (7.1) Playback in WINDVD 6 Platinum doesn't work proper

Similar Messages

Maybe you are looking for