Audigy 2 ZS Platinum Pro Drivers

<!-- [if gte mso 9]&amp;gt;&amp;lt;xml&amp;gt;
&amp;lt;w:WordDocument&amp;gt;
&amp;lt;w:View&amp;gt;Normal&amp;lt;/w:View&amp;gt;
&amp;lt;w:Zoom&amp;gt;0&amp;lt;/w:Zoom&amp;gt;
&amp;lt;w:PunctuationKerning/&amp;gt;
&amp;lt;w:ValidateAgainstSchemas/&amp;gt;
&amp;lt;w:SaveIfXMLInvalid&amp;gt;false&amp;lt;/w:SaveIfXMLInvalid&amp;gt;
&amp;lt;w:IgnoreMixedContent&amp;gt;false&amp;l t;/w:IgnoreMixedContent&amp;gt;
&amp;lt;w:AlwaysShowPlaceholderText&amp;gt;false&a mp;lt;/w:AlwaysShowPlaceholderText&amp;gt;
&amp;lt;w:Compatibility&amp;gt;
&amp;lt;w:BreakWrappedTables/&amp;gt;
&amp;lt;w:SnapToGridInCell/&amp;gt;
&amp;lt;w:WrapTextWithPunct/&amp;gt;
&amp;lt;w:UseAsianBreakRules/&amp;gt;
&amp;lt;wontGrowAutofit/&amp;gt;
&amp;lt;/w:Compatibility&amp;gt;
&amp;lt;w:BrowserLevel&amp;gt;MicrosoftInternetExp lorer4&amp;lt;/w:BrowserLevel&amp;gt;
&amp;lt;/w:WordDocument&amp;gt;
&amp;lt;/xml&amp;gt;&amp;lt;![endif] --><!-- [if gte mso 9]&amp;gt;&amp;lt;xml&amp;gt;
&amp;lt;w:LatentStyles DefLockedState=&amp;quot;false&amp;quot; LatentStyleCount=&amp;quot;56&amp;quot;&amp;gt;
&amp;lt;/w:LatentStyles&amp;gt;
&amp;lt;/xml&amp;gt;&amp;lt;![endif] --><!--
/* Style Definitions */
p.MsoNormal, li.MsoNormal, div.MsoNormal
{mso-style-parent:&amp;quot;&amp;quot;;
margin:0in;
margin-bottom:.000pt;
mso-pagination:widow-orphan;
font-size:2.0pt;
font-family:&amp;quot;Times New Roman&amp;quot;;
mso-fareast-font-family:&amp;quot;Times New Roman&amp;quot;;}
@page Section
{size:8.5in .0in;
margin:.0in .25in .0in .25in;
mso-header-margin:.5in;
mso-footer-margin:.5in;
mso-paper-source:0;}
div.Section
{page:Section;}
--><!-- [if gte mso 0]&amp;gt;
&amp;lt;style&amp;gt;
/* Style Definitions */
table.MsoNormalTable
{mso-style-name:&amp;quot;Table Normal&amp;quot;;
mso-tstyle-rowband-size:0;
mso-tstyle-colband-size:0;
mso-style-noshow:yes;
mso-style-parent:&amp;quot;&amp;quot;;
mso-padding-alt:0in 5.4pt 0in 5.4pt;
mso-para-margin:0in;
mso-para-margin-bottom:.000pt;
mso-pagination:widow-orphan;
font-size:0.0pt;
font-family:&amp;quot;Times New Roman&amp;quot;;
mso-ansi-language:#0400;
mso-fareast-language:#0400;
mso-bidi-language:#0400;}
&amp;lt;/style&amp;gt;
&amp;lt;![endif] --><p class="MsoNormal">Hi everyone
?<p class="MsoNormal">As I?m writing this, I?m losing my sanity. Never in my life a computer hardware has created this much problems for me as this card has. I have Audigy 2 ZS Platinum Pro and yesterday installed a 32 bit Windows XP professional again on my PC. I installed all my drivers and finally got to the Sound Card. I have serious problems with the drivers that are on the CD; if I only install the drivers from there, every time I click on EAX my computer restarts. This was a problem that I had since I bought this hardware 3 years ago. Last time (which was couple of month ago) I found an updated driver in creative website and everything worked fine until I re-installed my windows but I can't find that driver anymore.
<p class="MsoNormal">?
<p class="MsoNormal">First let me say finding drivers for this Sound card in creative support section is an absolute nightmare. Nothing is where it should be. The section doesn?t even have my sound card in their sound blaster list. What a joke.
<p class="MsoNormal">?
<p class="MsoNormal">As of yesterday, I have been unable to find any drivers for this product; nothing. I don?t have sound on my computer and if I go with the original CD installation my computer crashes.
<p class="MsoNormal">?
<p class="MsoNormal">Finally after searching through the forum (do I seriously have to search the forum to find drivers?!!) found a driver called ?SBAX_PCDRV_LB_2_8_000.exe? but my god that is even worse! Nothing works after the update. I don?t have any sound on my computer. EAX and other functions are not working. It gives one error after another. I can't even click on them.
<p class="MsoNormal">?
<p class="MsoNormal">I don?t know what else to do. I want to break this sound card to pieces but I paid 320 dollars for it. I know I?m screwed and stuck with this ?thing? but please, if anybody has a driver or knows where I can find the drivers, post a message here. I just want to listen to music on this 300$ sound card. Why did I buy this is what I?m asking myself right now. I?m going insane.
<p class="MsoNormal">?
<p class="MsoNormal">?

<!-- [if gte mso 9]><xml>
<w:WordDocument>
<w:View>Normal</w:View>
<w:Zoom>0</w:Zoom>
<w:PunctuationKerning/>
<w:ValidateAgainstSchemas/>
<w:SaveIfXMLInvalid>false</w:SaveIfXMLInvalid>
<w:IgnoreMixedContent>false</w:IgnoreMixedContent>
<w:AlwaysShowPlaceholderText>false</w:AlwaysShowPlaceholderText>
<w:Compatibility>
<w:BreakWrappedTables/>
<w:SnapToGridInCell/>
<w:WrapTextWithPunct/>
<w:UseAsianBreakRules/>
<wontGrowAutofit/>
</w:Compatibility>
<w:BrowserLevel>MicrosoftInternetExplorer4</w:BrowserLevel>
</w:WordDocument>
</xml><![endif] --><!-- [if gte mso 9]><xml>
<w:LatentStyles DefLockedState="false" LatentStyleCount="56">
</w:LatentStyles>
</xml><![endif] --><!--
/* Style Definitions */
p.MsoNormal, li.MsoNormal, div.MsoNormal
{mso-style-parent:"";
margin:0in;
margin-bottom:.000pt;
mso-pagination:widow-orphan;
font-size:2.0pt;
font-family:"Times New Roman";
mso-fareast-font-family:"Times New Roman";}
@page Section
{size:8.5in .0in;
margin:.0in .25in .0in .25in;
mso-header-margin:.5in;
mso-footer-margin:.5in;
mso-paper-source:0;}
div.Section
{page:Section;}
--><!-- [if gte mso 0]>
<style>
/* Style Definitions */
table.MsoNormalTable
{mso-style-name:"Table Normal";
mso-tstyle-rowband-size:0;
mso-tstyle-colband-size:0;
mso-style-noshow:yes;
mso-style-parent:"";
mso-padding-alt:0in 5.4pt 0in 5.4pt;
mso-para-margin:0in;
mso-para-margin-bottom:.000pt;
mso-pagination:widow-orphan;
font-size:0.0pt;
font-family:"Times New Roman";
mso-ansi-language:#0400;
mso-fareast-language:#0400;
mso-bidi-language:#0400;}
</style>
<![endif] --><p class="MsoNormal">Oh man, thank you thank you thank you! I could kiss you if you were here! After month and years of having problem with this card I can finally listen to what I want with no pain.
<p class="MsoNormal">?
<p class="MsoNormal">Thanks again

Similar Messages

  • Audigy 2 zs platinum pro lines in (1-2-3) no so

    I installed Audigy 2 zs platinum pro drivers on windows XP and i can't get no sound of any line in (/2/3). I have tried several different devices and anyone worked. My motherboard is Asus P4P800E - Deluxe. Please, help me...

    I have EXACTLY the same proble. There is not only no signal in, I cant hear anything monitored at all when using Cubase or in fact any other sound application. The only sound I can hear is when I plug my speakers/headphones straight into the back of the sound card. I checked my 'Digital Output Only' setting as previously suggested (it wasn't checked) - still no joy.
    Somebody please help....

  • Analog inputs no longer working on Audigy 2 ZS Platinum Pro's external dr

    I have an Audigy 2 ZS Platinum Pro. After two years of use without problems, the analog inputs on the external dri've have stopped working. I get no signal from them, not even noise. All 3 inputs are silent, Line in / Mic and Line 2 in the front, and Line 3 in the back. Otherwise the dri've appears to function normally - I get output from the headphone jack, and the volume control knob works. I have not tested digital inputs or outputs, as I currently have no digital devices to connect to them.
    I had made no major changes to my computer - software or hardware - when the problems began. I recently added a new SATA hard dri've, but the Audigy dri've did work after that.
    I've taken steps suggested in another thread on this forum and uninstalled all Creative software and drivers, used the latest driver package's uninstall program as well as Driver Cleaner, and finally manually deleted everything related to Creative and Audigy from the system registry (and rebooted quite a few times in between). I then installed the original drivers from the CD that came with the sound card (a setup that has worked before), but still the problem persists.
    Any ideas on where to even begin looking for a solution? I find it hard to believe that it's a hardware problem, since three inputs suddenly went silent at the same time, and no other connections were affected. Yet I've done as clean a reinstall as possible, and that hasn't solved the problem.
    My current computer configuration:
    OS: Windows XP Pro (SP2 and all latest updates)
    CPU: Athlon XP 500+
    RAM: 2x 52 MB
    Motherboard: Abit AN7 (integrated sound chip disabled)
    Video card: Sapphire Radeon 9800 Pro
    Network card: D-Link DFE-530TX
    Hard dri've : Seagate ST320026A, 20 GB IDE
    Hard dri've 2: Maxtor 6L080J4, 80 GB IDE
    Hard dri've 3: Seagate ST330083, 300 GB SATA-II

    I don't have a Platinum Pro or the dri've, but a general hardware troubleshooting step I would take would be to remove the soundcard and either move it to another slot or re-seat it. Also, I'd disconnnect and reconnect all cables to and from the card and the dri've. If I had another machine I could try the card or dri've in, I'd do that. If I could borrow another dri've or even another card, I'd test those too. (Swapping parts is often the simplest diagnostic.) Yeah, maybe it's not a hardware problem, but I'd take these steps just to rule out some possibilities.
    Edit: And if you can remove or disconnect the SATA dri've and restore the system to the condition before you installed it, that's another good test.Message Edited by Katman on 2-8-2005 2:56 AM

  • Microphone connection problems with SB audigy 2 ZX platinum pro

    I am using an old SB audigy 2 ZX platinum pro purchased back in 2004. It is installed on a PC that I stopped using it in 2005. The pc has no problems and I have started using it again.My problem is that I cannot connect the microphone. Everything was working fine at the time I was this pc including the microphone.At that time I had installed win xp pro( no service packs were available). But after I had to move physically in another location(connection and disconnections etc)and a pc format I cannot use the microphone again. I am trying to connect it to the front panel and to the appropriate places as indicated in the user manual but nothing is happening. I have connected properly the sound cart and all other components are working fine. I checked whether the microphone is checked to silent mode and all other software/di'vers nonetheless everything is working fine. I am now using Win xp pro sp3. I have contacted Creative and they told me to check the mic boost option. But there is no mic boost option now. I clearly recall that there was one when I was using this pc in 2004 under win xp pro(again no service packs were available at that time).One solution I could think is to format again and install some old version of win xp pro (say 2003 or so) and then update to current. But I do not want to format again since I do not have that version of windows available(copyright issues may also raise) plus for some other reasons I do not think I should mention them on an Internet forum. I also tried to download the latest drivers ans apps form creative ,clean installation from the orginal cd including Daniel_K pack and everything someone could think without solving the issue.Creative during our last communication in a very polite way told me to stop emailing them and try to solve the issue on my own as this product is no longer supported. One thing I neglected to mention above is that the mic boost option is available in the motherboard sound chipset. I checked it in one of my attempts to solve the problem. But it disappears when installing the SB driver. I know that if I manage to configure mic boost in the driver settings I will solve the problem.But once again there is no such option. Could you please provide with some suggestions and solutions on how to solve this?. Thank you very in advance for any suggestion and help

    Anybody?

  • HELP! Hey, (Yeah YOU!) I need some HELP with an OEM Audigy 2 ZS Platinum Pro SB0360 installat

    Hi Everyone.
    I'm new here so I'll try to be kind and make lots of helpful friends, especially folks at CL.
    Do you like a challenge?
    Try this on for size.
    My problem.
    I'm working on a PC for a doctor friend. It's a Gateway P4 dual 3.0 gHz "Media Center" unit.
    He let the antivirus proggie lapse and it was full of spybots, trojans and some missing stuff his kids (he says) had done (little kids like to click on stuff and he has 4 kids under 6 years old...).
    Anyway, I needed to re-install the whole system back to the original state. GW2K docs seemed to make that a piece of cake.
    Everything went well until the turkeys at GW2K threw me a curve - their CD re-install system just stinks. The CDs don't seem to AUTOSTART very well, the OS looks different than original (fo example - just plain ole XP Home instead of the neat-looking "Media Center" branding on the startup splash page), and then I got to a real problem.
    The SB0360 Audigy 2 ZS (Platinum Pro, I think) driver from GW2K installed OK, but the associated apps CD keeps spitting back that it doesn't find a "Sound Blaster" card.
    The Device Manager says its a Creative SB Audigy 2 ZS.
    I've tried to use updates from CL but they also spit at me - "No Sound Blaster found, Exiting".
    It seems that the Plug and Play only likes the GW2K driver, but the Apps CD don't like the "Creative" part, and so it balks. The CL drivers give the same message.
    GW2K tells me to contact Creative Labs or (haaaa) SAM'S, the purchasing store.
    Talk about the royal runaround...
    Anyway, anyone got any good ideas?
    I can't seem to find anything on the net to help.
    I'm about Google-ed out.
    Thanks in advance!
    P.S.
    I do have sound, Music CDs play fine and Windows sounds work OK.
    I just need to install those Audigy Apps from the GW2K CD...
    Message Edited by GrimWeeper on 2-02-2004 03:0 AM

    Anybody wants to help me ?I wait your answer for my question...!
    Thanks

  • Help Needed : Audigy 2 ZS Platinum Pro Hub doesn't w

    Hi all,
    I got a wierd problem with my SB Audigy 2 ZS Platinum Pro. The external Hub is VERY unstable, I mean that I own my SB card for two weeks now and I have the following behaviour:
    * Midi IN on external HUb doesn't works. "SB Audigy 2 ZS MIDI IO 2" is not visible on all MIDI applications (but "SB Audigy 2 ZS" yes!)
    * CMSS light on external Hub doesn't turn green when I turn CMSS on
    * OSD doesn't show and sound volume does not change when I change volume from the external Hub button.
    * Remote control doesn't works but red light flash on the external Hub when I press a button on the remote control.
    * FYI the optical out is always red which seems to say that the optical out is working correctly (but I haven't tested it because I have nothing to connect on it)
    For complexifying the problem I succeed in making all this stuff works only TWO times (in tow weeks) by reinstalling drivers and NOT restarting the computer. In this configuration, all the previous points works. I means that I can connect my midi keyboard to the Hub and play music thought the MIDI IO (and "SB Audigy 2 ZS MIDI IO 2" is available when everything works), I can use the remote control, OSD is showing etc ...
    I have really no idea why it was working only two times during these two weeks and I reinstalled the drivers and all softwares at least 5 times, rebooted the PC 30 times, etc ...
    Does anybody encoutered and solved the same problem ? Does my Hub must be changed.
    For your information, I have checked the internal configuration of my soundcard and everything seems to be correctly connected (including alim). I have also connected correctly the Two AD_Link cables. I have Windows XP SP2 on Intel 3Ghz with GB memory on Soltek QBIC system. No antivirus loaded.
    Please help.
    Thanks in advance.
    UPDATE :
    I had the support by phone yesterday and for the moment they have no explanation on what's going on ! I will try to phone again to the support tomorrow for advancing. For information they proposed me to do the following tests:
    - Does the optical out light is red when my hub doesn't work - the response is yes
    2- Does I have installed correctly the Hub alim - the response is yes
    3- Does I have installed correctly the connection cables between hub and card - The response is yes
    For information my analysis is that is doesn't comes from the software as when the hub work the CMSS light turn green during the boot of windows XP, moreover in computer science the behavious is most of the time reproductible. So from my mind it could comes from the following point:
    a- PC Alim not powerful enouth
    b- bad connection cables
    c- hub is not working and need to be changed

    Jminardi,
    I think I am in agreement with conclusion b or c. Although there are a couple things to check, first off go to Device Manager and go to view/resources by type. In here look and see what the IRQ assigned to the Audigy 2 ZS is and see if it is sharing with anything important like the video card. If so you might try another PCI slot just to sure there aren't difficulties caused by this. If everything checks out you might want to call tech support back and try to arrange a repair on the external box and cables.
    Jeremy

  • Audigy 2 ZS Platinum PRO meltdown All fixed

    <SPAN>Hi all.
    <SPAN>Normally I tend to help, but this time the tables have turned and I am looking for help. :smileysurprised:
    <SPAN>My lovely Audigy 2 ZS Platinum PRO sound card was working lovley, no hickups or problems until I upgraded my monitor yesterday.
    <SPAN>I have upgraded to a lovely CTX Triniton USB CRT monitor (to replace my old generic 7" monitor).
    <SPAN>For some unknown reason EAX console nolonger works. It crashes with an error report.
    <SPAN>"<SPAN>AppName: eax.exe AppVer: 2..8.0 ModName: unknown <SPAN>ModVer: 0.0.0.0 Offset: 0082ce85"
    <SPAN>Surround Mixer no longer works either, in fact NONE of the Creative applications work, however the card works in games and music applications.<SPAN>
    <SPAN>I am completely at my wits end. I uninstalled ALL of the drivers/applications and deleted the Creative directory. I am using the stock drivers and applications off the CD, but even THEY do NOT work!!!<SPAN>
    <SPAN>HELP!!!<SPAN>
    <SPAN>I reverted back to my old generic 7" monitor, but the problems still persisted!!<SPAN>
    <SPAN>What is going on?<SPAN>
    <SPAN>I did a full virus and spyware scan and that found NOTHING!!<SPAN>
    <SPAN>Any help and advice would be appreciated.<SPAN>
    <SPAN>PS I cannot reformat because I am using a RAID0 array which has important data on it.<SPAN>
    Thanks
    Message Edited by JohnZS on 09-09-2005 0:3 AM

    JohnZS wrote:
    Hi all.
    Normally I tend to help, but this time the tables have turned and I am looking for help.
    My lovely Audigy 2 ZS Platinum PRO sound card was working lovley, no hickups or problems until I upgraded my monitor yesterday.
    I have upgraded to a lovely CTX Triniton USB CRT monitor (to replace my old generic 7" monitor).
    For some unknown reason EAX console nolonger works. It crashes with an error report.
    "AppName: eax.exe AppVer: 2..8.0 ModName: unknown ModVer: 0.0.0.0 Offset: 0082ce85"
    Surround Mixer no longer works either, in fact NONE of the Creative applications work, however the card works in games and music applications.
    I am completely at my wits end. I uninstalled ALL of the drivers/applications and deleted the Creative directory. I am using the stock drivers and applications off the CD, but even THEY do NOT work!!!
    HELP!!!
    I reverted back to my old generic 7" monitor, but the problems still persisted!!
    What is going on?
    I did a full virus and spyware scan and that found NOTHING!!
    Any help and advice would be appreciated.
    PS I cannot reformat because I am using a RAID0 array which has important data on it.
    Thanks
    CTX Triniton USB CRT --> does USB mean, there are USB hub/controller(s) 'onboard' --> how many USB controllers more can be seen on device manager? Some of these may share IRQ with Audigy or its 'add-ons'.
    Try to disable all those new USB controllers 'comes with monitor' or turn them OFF (from monitor panel) if it's possible. You can then later apply them easily.
    <i>Also, did you install some software bundled with monitor. Thse may have changed some files to newer or older versions. Try re-installing SP2/directX/patches for OS.</i>
    .jtpMessage Edited by jutapa on 09-08-2005 :23 PM

  • Audigy 2 ZS Platinum Pro and Vista 64

    I just built a new computer system?and am trying to get my Audigy 2 ZS Platinum Pro to work in my new system. I am running 64 bit Vista?on an ASUS P5E-V HDMI motherboard with 4 GHz of memory and an intel Quad Core Processor. I have downloaded the Vista drivers, but I cannot get everything to work properly. My THX console, speaker setting console and others will no longer work. I am getting sound only through the front left and front right speakers. My subwoofer, center channel and right rear and left rear spekaers will not work. I have confirmed that analog 5. has been selected and that digital is not checked. I am at a loss as to what to do next. I have Logitech THX Z-5300e 5. speaker system. Please help!

    Is there no one out there that can help?

  • Audigy 2 ZS Platinum Pro + Xbox 360

    #Audigy 2 ZS Platinum Pro + Xbox 360? My xbox360 audio setup:
    Xbox360 - Optical audio out - Dolby Digital 5. / Dolby Digital with WMA / Digital Stereo
    Cable - Meter Fiber Optic cable audio Cable
    Input - SPDIF/Optical-IN on Creative Sound Blaster Audigy 2 ZS Platinum Pro External Dri've
    Decoder - Creative Built-in Dolby Digital/DTS SPDIF-In Decode @ 48/96KHz
    Speakers - Creative Inspire T7700 7.
    OS: Windows XP/Vista with Latest Creative drivers.
    Concern:
    1 - Whenever Xbox starts up - i have to remove the cable and replug it in for the sound to start coming.
    2 - If i play any video or movie - there is no audio heard and after the movie ends - i have to reconnect the audio cable for the system sounds to return. (this does not apply to in-game FMV)
    3 - Sound breaks and cracks in some games during multiple loud audio scenes. Such as in Forza3 - a car crash would cause cracking/breaking sound.
    Overall most games run fine - I just dont know why no audio is heard when a movie is played! I've tried all different audio setups on the 360 but nothing works (WMA makes cracking worse)
    Whats the cause and cure?

    Problem solved.
    Uninstall/Reinstall SP3 did the job
    Pan

  • Audigy 2 ZS Platinum Pro and Inspire T7700 does not recognize Mic on Audio Control

    Hi folks,
    I decided to hook up my headphone and mic sets to the Audio Control Pod for the first time recently to chat online. I'm not sure if I ever tried this when I bought the Inspire T7700 speaker system, but I cannot seem to get any voice to come through in Windows' Sound Recorder (the headphones work fine). I'm hoping that someone here can help...otherwise, I suppose I'll have to find an alternate solution than using my soundcard system.
    Here are some specs:
    OS: Windows XP SP2 and all current updates
    Soundcard: Audigy 2 ZS Platinum Pro
    Speakers: Inspire T7700 with Audio Control Pod (contains the headphone and mic jack)
    Here's what I have tried:
    . Updated drivers to: SBAX_WBUP2_LB_2_09_006.exe
    2. Tested headsets and mics out on another one of my computers with a SoundBlaster Li've. They work fine.
    3. Set each audio source with full volume in the Recording Control window as the source while recording in Windows' Sound Recorder (I know some of these aren't right, but I tried them all nonetheless):
    - MIDI Synth
    - Line-In 3
    - Line-In /Mic (this should be the one, I think)
    - S/PDIF-In
    - Auxiliary (this might be the one for the Audio Control Pod)
    - "What U Hear"
    - Line-In 2
    - CD Digital
    - Wave
    4. Installed the Creative software from the official CD to manage the audio and speaker settings. Retested the same as item 3 above within this software. Same results.
    5. Disconnected the external I/O hub (since I am connecting to the Audio Control Pod, which connects to the speaker system and then my sound card). Interestingly, the Line-In /Mic input disappeared. All that I saw for an input (I believe) was Auxiliary. I tried even that as noted in item 3, but nothing.
    Has anyone had any luck in getting a mic from a headphone set to work with the Audio Control Pod for the Inspire T7700 speaker system along with the Audigy 2 ZS Platinum Pro?
    Thanks in advance for the help!

    Read the FAQ on top of the soundcard forum concerning SPDIF and digital out. The reason is very easy to find out if you read that. In short: the digital out can only send out a PCM stereo signal (which is why you only get FL/FR sound) and an encoded AC-3 signal.

  • Audigy 2 ZS Platinum Pro not recognised by Vista 32 b

    Hi
    I cannot get my new computer to recognise my Creative Audigy 2 ZS Platinum Pro Sound Card. Have tried a new mobo, interchanged video cards, HD's, ram, and just about everything else that could ever possibly be incompatible with hte sound card. Have even tried different power supplies. I have all latest drivers installed and have disabled the onboard sound card in the bios.I've had the card for over a year now and it used to work well in my old computer running XP.
    Can anyone help
    Thanks.
    My system: Asus P5K Premium/Wifi, EVGA 8800GTX, Corsair 2GB DDR2 800, Creative Audigy 2 ZS Platinum Pro, 50GB WD Raptor HD + 250GB Seagate, 620w Corsair power supply, Vista Home Premium 32 bit.

    Sound card recognition issues are usually related to software/driver conflicts. I had an Audigy2 that thought it was an Audigy once! I'm confident that a FULL remove of Creative files will solve your issue. It did for me anyway.We've made a list of all the problem Creative files & entries that need to be removed here.http://nomoregoatsoup.wordpress.com/...tall-problems/ After that, your drivers will install properly.Hope this helps

  • Audigy 2 zs platinum pro - remote won't w

    as the subject says, i have an audigy 2 zs platinum pro and my remote (rm-500) won't work, i have a rm-900b from my last sound card here and it works fine with the I/O hub, i have all the settings correct and a new battery in the remote (rm-500) any help on how i can get this to work would be great, as i have search the forums, updated my drivers, sent a email to creative ( but they are closed for the holidays now), searched the knowledge base and have just tryed playing around with it to try and get it to work.
    thanks in advance
    ApeXi

    Anybody?

  • Microphone Issue - Sound Blaster Audigy 2 ZS Platinum Pro Audio C

    Hey there, sorry to post but I've got a little issue which I'm sure is me being stupid but its racking my head so here it comes. I have recently started using talk programs such as vent, skype blah blah to speak to people back home and since moving abroad I have found that now I need the mic to contact these people (which it used to fine before I arri'ved on foreign soil). On clicking on volume control and advance or properties I have nothing in recording for mic and this is where im lost. If I enable the mic on any of the programs people are hearing whatever happens to be coming out of the computer speaks such as games or a movie etc. i've just tried a full removal and reinstallation of the sound drivers for the model in my comp (Sound Blaster Audigy 2 ZS Platinum Pro Audio Card).
    All my mates are saying surely you cant lose mic from the volume control but yet its gone and I have no idea how to reactivate it. People seemt o think the card is buggered but it seems fine with everything else I fire out.
    Any help on how stupid I'm being would be great.
    Thanks in advance.

    Hi Joko,
    Please check your private message.

  • Audigy 2 ZS Platinum Pro and XP

    I have Audigy 2 ZS Platinum Pro and Logitech Z-5300 5. Speakers. When using XP SP, everything worked perfectly, then I upgraded to SP2. It has been a complete multimedia nightmare.
    When using the diagnostic tools, each speaker works perfectly except will always have a faded voice to the point where I cannot hear the voice but I can hear something was attempting.
    WinAMP or Media player or any other MP3 player to include tools coming with creative labs products, I get music only out of a single (Center) speaker. The rest lay silent. I upgraded my sound card drivers using Creative Lab's website. Any ideas how to get my system back to normal sound quality, as of this moment I am thinking creative lab's products do not work correctly under SP2.
    Any help would be appreceated and for the money spent on the card, I kind of expect creative to have a solution.

    Roaming,
    Try cleansweeping and reinstalling the sound card. Sometimes after a major update (like a service pack) some hardware or software needs to be reinstalled. Here is a link to the article that describes how to cleansweep your card.
    http://us.creative.com/support/kb/ar...asp?l=2&sid=72
    Jeremy

  • [Audigy 2 ZS Platinum Pro] need h

    i got myself a nice old Audigy 2 ZS Platinum Pro from a friend.
    but as i hear i have several options as for what drivers to use.
    official driver - http://kxproject.lugosoft.com/
    i think i know there are others as well
    what should i do?
    as some ppl will say there is http://forums.creative.com/creativelabs/board/message?board.id=soundblaster&thread.id=46767
    but
    !!! it says
    [color="#ff0000"]"Creative Audigy 2 ZS ( non Pro ) owners" [color="#000000"]thats kind of killing the point with my card.
    how should i install and work with my brand "new"? Audigy 2 ZS Platinum Pro.
    i want to work this point out before installing it's

    I'd give you a stereo adapter, too, since you might want to use the port as line-in. However, you may not be aware that a mono /4" plug fits in a "stereo" /4" jack. The mono plug has no ring, but it has a longer sleeve, which means that the ring contact and the sleeve contact in the jack get connected together, in that case. The same thing is true of /8" plugs and jacks, so the more general /8" female to /4" male adapter is the "stereo,"? three-contact version. If you plug a mono plug into a stereo input, you will ground the right-channel input, which means you will get the left channel, but the right channel signal will be 0 volts and will end up silent. If I were to design a dual-purpose line/mic jack, I'd have to use a stereo jack, but I could switch what I do with the input signals, ignoring the right channel in mic mode, running the left signal through a mic preamp circuit, and sending the preamp output to both channels, so the mic signal is panned to the middle of the stereo field, instead of hard left.
    -Dave
    ?[email protected]

Maybe you are looking for