Audigy 2 ZS Platinum Vista 32bit full support

I would like to know if there will ever be full support drivers for the Audigy 2 ZS Platinum card and the I/O box in Vista 32 bit's? I am looking for the ability to use my 6. speakers correctly and being able to record through Line-In on the card. I would hate to think I will have to go to a competitor for a card that works fully in Vista.

He didn't ask this in 2005, he's registered in 2005, he asked this a month ago (just look again back, I made the same mistake too )?About some replies:Yes the audio?stack in Vista must be very difficult to handle, but the companies had MONTHS, there has been A LOT since Vista's Beta versions and RC etc has been around. Everyone had enough time. I just can't play music correctly because of the current Vista drivers. Furthermore, I can't play my favorite game because some sort of application cslled audiodg eats lots of CPU while anything is playing through my sound card: not a good idea for games as they REALLY doN't run smoothly this way. What I want is not an immediate support, but a well planned approximate date for the new, clean, smooth drivers for Vista. Ok, maybe they are not ready and won't be ready until September, so I'll go back to XP. Or they are maybe ready and the developers are making the last adjustments and the driver's coming in a week or two, so I'll stick to Vista. Creative NEEDS to give this information to the customers, no one has to wait with bogus drivers. I'm not blaming Creative for having their drivers not ready, I understand that, it's technically difficult, but they should at least inform us about when will the drivers be ready.

Similar Messages

Creative Audigy 2 ZS platinum Vista Supp

Guys
i've a Audigy 2 ZS platinum
I bought a New Windows Vista Ultimate 32BIT
I try installing the drivers from the Driver CD its not supporting
I downloaded the vista drivers from web
and its the most lousiest driver pack i ever saw in my life
Is there any way to enable the full audio console(like THX,EAX,Graphic EQ and speaker settings) for Vista?
Why creative is not up to date with the market...
why no Vista support is available for creative.. weird...
any brilliant ideas from anywhere?

Exactly how I feel. It borders on the absurd that 5 months after Vista release Nvidia has nothing but garbage drivers and applications for Audigy2.

Audigy 2 zs Platinum, Vista 32 Ultim

Hello all,
I'm having a problem installing the Audigy 2 zs Platinum on Windows Vista Ultimate 32 bit. The computer boots and sees the card as a "Multimedia Audio Controller" in the device manager. It offers to automatically install drivers, which (naturally) fails. I've downloaded and installed the Vista drivers from Creative support, but after rebooting, the situation remains the same. I've tried pointing a manual driver install at the C:\ dri've, to no avail.
Any advice?
Thanks!
darthbith?

The Audigy 2zs will install 2 devices in Windows. One is the sound and the other is a game port. If you hear sounds then it's working correctly. As correctly as the windows update drivers allow anyway. The game port isn't supported. There won't be any problems if you leave it like this, however if you don't like to see the not installed device then install the game port support pack from here.
A better option yet would be to install the daniel_k drivers from here. These will also install the game port drivers, and offer better sound with more features as well.

Audigy 1 + Audigy 2 ZS Platinum + Vist

So I decided to plug in my old audigy to have an extra sound card to play music and use with ventrilo.
Once I got around some problems getting the driver installed I noticed that I get no sound whatsoever out of the Audigy . When I checked the device properties for the audigy I noticed there was no tab for "Tone," "Custom," nor "Levels."
However the Audigy 2 ZS works 00%.
anyone else try this or another combination of different model Audigys?
What are the odds that this combo ever working under vista?
-- judging from some of the complaints about the lack of updates I'm thinking never?

terror_adagio wrote:
It would seem Creative's Audigy and also Audigy 2 ZS sound cards produce unwanted sound problems with RAID setu
ps.
Specifically, my testing was done on an onboard Promise 378 RAID 0 setup. The following setup was configured:Windows XP (Tested both Home & Pro)Intel Pentium 3.4C Ghz HT 800FSB2GB Corsair TWINX PC3200ASUS P4C800 Deluxe2xWestern Digital 60GB Caviar's Special Edition 8MB Cache in RAID 0Onboard Promise RAID Controller Fasttrak 378 (old and newest drivers tested)Creative Sound Blaster Audigy MP3+ Retail & Creative Sound Blaster Audigy 2 ZS Retail (all available drivers tested)The sound problems are heavily distorted sounds, cracks, cut-outs, and hissing when any type of audio is playing and is especially apparent with using the hard dri'ves.The standard Intel based Non-RAID configuration contains zero problems with any sound. It is only when users are using RAID that these problems occur. It would definitely be in Creative's best interest to investigate this issue and resolve a solution. This problem has been around for a long time, with no support from Creative.Please note, the onboard sound audio was tested with RAID setups and non-RAID setups and there were never any sound problems with either. All available PCI slots were tested and various PCI Latency configurations were tested within the BIOS. No solution was found.
Hi, have you find a solution?
I try to disable the Promise PDC20378 controller and the problem seems disappeared.

Audigy 2 ZS Platinum Pro not recognised by Vista 32 b

Hi
I cannot get my new computer to recognise my Creative Audigy 2 ZS Platinum Pro Sound Card. Have tried a new mobo, interchanged video cards, HD's, ram, and just about everything else that could ever possibly be incompatible with hte sound card. Have even tried different power supplies. I have all latest drivers installed and have disabled the onboard sound card in the bios.I've had the card for over a year now and it used to work well in my old computer running XP.
Can anyone help
Thanks.
My system: Asus P5K Premium/Wifi, EVGA 8800GTX, Corsair 2GB DDR2 800, Creative Audigy 2 ZS Platinum Pro, 50GB WD Raptor HD + 250GB Seagate, 620w Corsair power supply, Vista Home Premium 32 bit.

Sound card recognition issues are usually related to software/driver conflicts. I had an Audigy2 that thought it was an Audigy once! I'm confident that a FULL remove of Creative files will solve your issue. It did for me anyway.We've made a list of all the problem Creative files & entries that need to be removed here.http://nomoregoatsoup.wordpress.com/...tall-problems/ After that, your drivers will install properly.Hope this helps

Audigy 2 ZS Platinum: Optical cable doesn't recognize DTS 5.1 on Vista

Hello!
This is my first trheat, where I've been search other discussions about this subject, but noyone helpt me.
I have a Inspire 7. switched on a Audigy 2 ZS Platinum, that has a IO-DIN to connect external features (see here: http://images.americas.creative.com/...large/4659.png)
Then, I used it to play guitar without problem. But, now I want to switch on my Xbox 360 with optical cable, but it is working only stereo way. When I switch to 5., occrus a?BIP and the sound stay mute.
My doubt is: the optical in recognize only stereo sounds? How can I get 5. sounds on my xbox 360?
OBS: The sounds effects on Windows games?and DTS movies are perfect on 5. channels. The problem is concentrad on optical cable only.
PC configuration:
Q6600
6 Gb RAM
video card nvidia 8800GTS
Windows Vista 64 bits
Creative last driver (SBAX_PCDRV_LB_2_8_000.exe )
Inspire 7.

Hello KokChoy-CL.
Many thanks for your support!
I've been reinstalled the drivers and changed the options of your link, now the DTS 5. effects are quite working on my xbox.
Again, thank you!
Lucio.

Sound Blaster Audigy 2 ZS Platinum with Vista 64

0Sound Blaster Audigy 2 ZS Platinum with Vista 64Y Hi
I'm considering buying a Sound Blaster Audigy 2 ZS Platinum (with front panel) off ebay, but first I'd like to know if certain features will be compatible with my system. I'm running Vista Home Basic 64bit (hardware is an Asus P5Q-E, Q6600, 2GB of RAM, ATI Radeon HD4850, etc). I'll be using this card for my PC's 5. surround sound system (using the stereo outputs), and more importantly, recording some music. I want to achieve this by using the optical S/PDIF port, as my bass guitar effects board has an S/PDIF output and I've got an S/PDIF cable. I'd also like to use the Line In and Mic inputs. The driver before the latest one for this card said that there was no S/PDIF passthrough for Vista. Has the latest driver got everything I need fixed, so I can just plug it in, install the drivers and then be happily recording through these three inputs?
Thanks for the help?
Message Edited by SuperMaximo on 05-22-2009 2:4 [email protected]

I am brand new to this message system but I am so desperate for help I thought I would try it. After reading lots of comments I find that my problem may be more the rule than the exception. I have an Audigy @ Platinum card and all I ever get from it is crackling and popping. I have been around and around with Creative support but nothing they tell me results in a fix. I am so disgusted at this point that I am ready to just trash the whole thing. I have gone through the BIOS and checked so many settings its a shame. Still crackling and popping. I NEED SPECIFIC ANSWERS FROM SOMEBODY...not just the generic flip the wingle wangle to port xyz and move this to that. here has got to be an answer to this maddening problem. The other thing is that now I can't get my MIDI keyboard to play back. I must have turned something off in the set up process but now I have no idea what to do.
If anyone has any solid answers for me PLEASE come forward with them before I kill someone!

Vista ultimate x64 any chance to get decoding of dts and dolby digital for audigy 2 zs platinum

hello,
i need the support of deconding dts or dolby digital for my audigy 2 zs platinum pro.
is there any chance to get this feature back in vista ultimate x64?
i hope anybody can help me.
thanks for all
steffen

According to Creative, Vista no longer supports the decoding of Dolby and DTS at the driver level, so no, that feature proabably won't added back in the future. It is gone for all the Creative cards.

Technical Support Request - (Audigy 2 ZS Platinum Hacked?

I just want to know yes or no can a sound card or video card be hacked. More importantly my old computer was hacked right down to the bios. Can not install windows nothing works. Is it safe to put my Audio Card (Audigy 2 ZS Platinum) into a new computer or could doing so harm my new computer? Should I just by another card? I would love to save the money from not buying another card but not if there is any chance that it will harm my new computer. >Original Message Follows:>------------------------>=======================>>Subject: CLI - Technical Support Request - (Audigy 2 ZS Platinum)>Name: Br Gordon 32>Self Description: Intermediate PC User>Country: United States of America>------------------>Support Inquiry: ID(5) I need help with a third-party software>application>Product: Audigy 2 ZS Platinum>------------------>Operating System: Windows XP>Computer Brand/Model: E Machines>Processor/CPU: pentium 4
2.0 ghz>Memory: 52 mb>>Detailed Problem Description:>I have two questions. One I have Audigy 2 zs>sound card in an old computer that got hacked>bad. I was thinking of using it in my new>computer but my old computer got hacked right>into the bios. I have not been able to get a>tech to fix it because it was hacked so bad. So>my question is this. Is it safe to put this>sound card in my new computer?>> If someone can get into my bios could they do>something to a sound or video card that would>make it dangerous to put in a new computer?>Should I just buy a new sound card from you?
THE QUESTION BELOW CAN BE IGNORED I was just curious about the answer.
My second question has to do with Asio. There is a>website www.asio4all.com that I downloaded from>because one of my VST soft synths said I needed>it. But windows li've care said it was a trojan.>(ASIO4ALL 2.7 ) Are there third party websites>that offer Asio that are safe?>> When I first installed the ASIO Im not sure it>was from that site and it seemed to work like a>regular program but lately I have been cleaning>my computer from a hacker and windows identified>it as a trojan. So my last question is do you>have asio drivers that would work with VSTs>requiring it's>>Would they only be bundled with creative sound>cards or are there third party distributers that>can be trusted. I guess Im asking if windows>li've care could be wrong. I removed it just to>be safe. I hope I did not ask too many>questions. I appreciate your time and efforts in>answering my questions.>Sincerely>Brian G>

No, it can't

Audigy 2 ZS Platinum Pro and Vista 64

I just built a new computer system?and am trying to get my Audigy 2 ZS Platinum Pro to work in my new system. I am running 64 bit Vista?on an ASUS P5E-V HDMI motherboard with 4 GHz of memory and an intel Quad Core Processor. I have downloaded the Vista drivers, but I cannot get everything to work properly. My THX console, speaker setting console and others will no longer work. I am getting sound only through the front left and front right speakers. My subwoofer, center channel and right rear and left rear spekaers will not work. I have confirmed that analog 5. has been selected and that digital is not checked. I am at a loss as to what to do next. I have Logitech THX Z-5300e 5. speaker system. Please help!

Is there no one out there that can help?

Is OBI 11g is supported on Vista 32bit?

I am sorry I should have addressed this in a new thread, so here it is
I am having problems configuring OBI-11g on Vista Enterprise - SP1 - 32bit. The installation, however is successful.
The link provided is for: Release 10.1.3.2.1 for Microsoft Windows (http://download.oracle.com/docs/cd/E10352_01/doc/bi.1013/e10270/toc.htm#CEGGGCEG
) and it seems Vista is not supported in 10.1.x
Can anybody advise if OBI 11g is supported on Vista 32bit and if they have it running successfuly?
Thanks.

Hi,
I have the following confirmation from Oracle:
'From the certification Matrix, http://www.oracle.com/technetwork/middleware/bi-enterprise-edition/bi-11gr1certmatrix-166168.xls#'Current System Certification'!A1
Only having OBIEE client is supported on Vista but not the server and that can be the reason that you are having issue. You need to choose from one of the supported Operating Systems for having the server installed.
As I am configuring OBIEE for server <-- it is currently recommended that vista will not support it.
Thanks.

Audigy 2 ZS Platinum

First of all, Hi this is my first post here. I own an Audigy ZS Platinum Pro, an SB Li've, and have been a loyal Creative customer since the Soundblaster 2.0 6bit I fitted to my 386SX. I've been working in I. T. for 3 years in various roles, from C++ programming to IT Management. I'm currently certified as an eMCPA, MCP, MCSA, MCSE, MCSA&MCSE+Messaging, and am about to complete a VCP and soon?a Cisco Unified Messaging cert. I'm far from uninformed, I guess that's what I'm trying to get across. Now some other facts:- Windows Vista has been available to corporate customers since November 2006.- Windows Vista has been available to retail customers since January 2007- Windows Vista SDK including Driver SDKs have been readily available since early 2006. Yes you read that right.
Now, I like most people downloaded the Audigy 2 ZS Plat Pro drivers for XP and found they didnt work under Vista. Things like the scale of the volume controls was way off - but Surround sound was strangely enough working. I have a full surround sound system with either SPDIF or just RCA inputs. I use either, I'm not that fussed. I could not use these drivers as there were so many bugs under Vista (the XP drivers) that it wasnt workable. I then waited for well over a month. Eventually, Creative release the first beta drivers for the Audigy 2 ZS Plat Pro under Vista 32bit. I install these drivers, and find to my dismay, everything sounds absolutely terrible (I'm not sure how the quality can be so bad?) and also the rear channels won't work. No SoundBlaster applications are installed. It's like I'm using the worst onboard sound ever invented with the world's worst driver and application support. At this point I'll remind you?I paid over $450 for this card and external box. That is a massi've expense and one I only outlayed due to my previous faith in Creative. I already had my suspicions about the quality of the drivers due to the way the previous XP drivers had been bundled into 3 files then a patch and then that was changed, and it was all very seemingly mismanaged. Anyway the drivers bomb out without warning on January 2th, which I was very much less than impressed with.When I first hit the Creative site that morning, the updated drivers were NOT available. That is absolutely unacceptable. Later that day, the current drivers were posted. With massi've warning labels like "THESE ARE AN UNSUPPORTED BETA DRIVER. DO NOT USE THESE....<continues like this>" I download these and install them, and find to my dismay CMSS might be present but it's implementation is very very poor and I'm getting truly abysmal quality through the rear channel. It's like somebody ripped the DAC out and replaced it with one they bought from a 25cent bargain warehouse. I then change volume settings and attempt to use some of the features of the card and find that practically nothing that is present in the XP drivers is actually working in these drivers. There is no point using these drivers other than to hear Windows sounds. They are buggy, suffer from massi've quality problems, and do not include any of the features that I bought the card FOR and also cripple my home stereo/theater sound reproduction to the point it's not worth bothering with. So thanks, Creative, for because of your drivers alone, I'm now dual booting to XP and having to wait to actually begin using a new operating system, for absolutely no reason other than the incompetence displayed by Creative. Not anyone elses, the Video card has been working fine since Vista Beta , and every single other device in my system including USB sticks and third party disk controllers, all work great under Vista. Every single, and I mean every single, one of these other manufacturers had a software team that was worthy of the hardware. I'm afraid that I can't say the same for Creative Labs. The software is truly terrible now, you need to fix this situation. In closing, let me also remind you that it is now the 2st of February, 2007. These unsupported beta drivers have been my only option for well over a month. Prior to this drivers that were barely alpha release drivers were my only option, and prior to that - I had no option. This is completely unacceptable. Microsoft did not just spring Vista on the market; SDKs were made available 2 months in advance and even futher in advance for hardware vendors. Please stop blaming Microsoft or implying it is their fault for implementing DRM. This was documented, published, warned about in advance, and any software or hardware manufacturers caught behind the 8 ball like this should be truly ashamed, and fully expect to lose the vast majority of their Enterprise level customers, which filters down to the IT Media, which filters very quickly down tos Consumers. Once your products are recommended AGAINST, on major websites and in major IT publications, the retail customer will no longer select Creative. Do not be complacent, it will happen if nothing changes and extremely rapidly. This will take a long time for the user base to forget too, we will be suspicious and never trust Creative for many years. Neither I, nor my businesses, will ever buy a PC with a Creative component in it again, and I have written to local Computer publications stating the same. I am removing my Creative hardware from the systems, and will move to another high end manufacturer that does have current Vista drivers. Believe me people there are cards out there with better SNR and all of the features and more, with driver support. This shows a real lack of commitment to the customer base on behalf of Creative. This post is not intended to start a debate. It is a letter from myself, and my?local I. T. community, to Creative, for comment on by the community. Everyone should realise that the software development lifecycle for a modern I. T. hardware vendor needs to be tracked closely to the operating system vendors' releases and patch levels. Creative, are not behaving with any professionalism. This is not an operating system being delayed, this is a driver, the tools for which have been made readily available to Creative by Microsoft directly for over 2 months, Creative manufacture the hardware, and to add insult to injury Microsoft worked with hundreds of hardware vendors to ensure Vista compatibility. For the Creative Vista drivers to be in this state of disarray on February 2st 2007 is a terrible reflection on Creative, showing a massi've lack of planning. Pardon me for asking, but is everyone at Creative asleep?On behalf of the I. T. Community at large, I hope Creative acknowledges our disgust.?Travis RoeMessage Edited by troe on 02-20-200709:52 PM

Well so far this only Issue Im having with my my Audigy 2 ZS Platinum Pro drivers , it's the sound is Crappy, but to be honest, it look like a performance Issue , cause if im not in a game the sound is quite better, but as soon I've let my music play during a game, the Sound Goes to So So to BullS**T. Im in IT since a long time, I won't tell all my degree and so but..! Im a pro..!?While Running Game my Sound card decrease my performance. And sometime I need to restart cause Cracking noise get over the game. I can be 2 Weeks without restart Needed...!If there any Beta Drivers Available I would like to be on trials...!BTW IM not just blaming Creative for Drivers and Issues, developing Drivers under Vista is Really new,Hardware layer are really not the same as all windows OS..! So keep up the good Work Guys..!We can blame Bill and is friend to have create a New Layer :P but I won't cause in year, everything will be Perfect..! now it's just too new ?Thanks,?here is my Spec. AM2?DualCore 4800 +4 gig Ram DDR2 800 Mhz OCzAsus CrossHair MotherBoard.5Tera in SATA RAID WDAsus 7800 GTX GeforceAudigy 2 ZS Platinum ProRunning under Vista Ultimate ( Registered with Real Info, Im a MSDN Subscriber + MCP )??

Audigy 2 ZS Platinum- Inspire 4.1 don't see each other after computer move

?? Running: Windows XP Pro
Sound Card: SB Audigy 2 ZS Platinum? Driver Version 2.8
? Speakers: Creative Inspire 4. 4400
? Software: Creative Media Source 3.30
I moved my computer to another room and started having sound problems. I removed Creative Media Source 5 ( I had it when I used the creative zen mp3 player ) because I thought it was redundant on my system. My sound is now hollow and tinny. But the truth is I don't know what caused the problem to begin with since the Holidays were involved and many people were at my computer. I only want the sound to be as great as it was before.
These are my problems:
. No matter how many times I set the audio properties through the volume control icon on the taskbar, the configuration always resets to desktop stereo speakers instead of surround sound.
2. Using the Creative Speaker Settings results in information showing that there are only 2 speakers attached and they are synchronized with control panel. Under speaker calibrator it reads that there is a generic speaker system.
3. Using the calibrator Wizard, only 2 speakers show up.
4. Normally in the EAX console, the Effects tab shows many settings - but now there is nothing inside the box.
5. On the CMSS3D tab, the slider for the speakers is grayed out
6. The THX setup console on the Speaker selection tab there is nothing under the speaker selection tab - There is an analog output and a digital 48khz under digital sampling.
7. Under calibration there are only left and right front speakers the subwoofer and rear speakers are grayed out
This is what I have done to troubleshoot my problems:
. Used Auto update of card which reads that everything is updated. There are no drivers for the speakers, so that is ok.
2. Through the Creative Organizer I enabled CMSS
3. Through the Creative Audio console on the Decoder tab, I have checked use built in decoder and under speaker mapping for 4./5 using side channels
4. Under Dolby digital settings Dynamic Range is Full - Dolby Pro Logic is ON - Dolby Digital EX is ON --- DTS for Es is ON
5. Made certain all connections are secure and verified the placement of the green and black wires coming from the subwoofer are connected to my computer in the correct place, namely that the black wire is in the second hole from the firewire port and the green wire is in the third hole
Please help me if you can. I'm ready to throw in the towel, I would even buy digital speakers but don't know which way to turn. I don't know if it's the card or the speakers or the fact that I removed the Media source 5 (for which I can't find the disk.)
Thanks in advance for reading this and taking the time to troubleshoot with me.
Jane

Hello KokChoy-CL.
Many thanks for your support!
I've been reinstalled the drivers and changed the options of your link, now the DTS 5. effects are quite working on my xbox.
Again, thank you!
Lucio.

AUDIGY 2 ZS PLATINUM PRO : 8-Channel (7.1) Playback in WINDVD 6 Platinum doesn't work proper

Ok here's the deal.
I have a Audigy 2 ZS Platinum Pro
Furthermore I own WINDVD 6 PLATINUM (incl. Booster pack) which supports 8 channel audio.
My speaker system is an analog one. The 8 speaker Creative Inspiron one.. don't know the exact name.
I just did a clean installation of Windows.
I am running windows XP Home SP2 with all latest updates.
Furthermore I installed all Audigy 2 ZS Platinum Pro updates there are.
Anyways..
Whenever I switch to 8 channel (7.) playback from within WinDVD only the center and the 2 front channels work. The side (surround) and rear channels aren't working at all!
I get the same problem when I switch to 7 channel (6.) from within WinDVD.
When I click on test (in WinDVD) to see if the channels are working.. the test noise only appears in the front and center channels. However once it gets to the rear channel there's nothing.. and at the side left channel there's this quiet odd noise.
If I switch to 5. (from within WinDVD) mode.. everything is working perfectly... but 5. only..
I want to take full advantage of my soundcard.. and even though WinDVD supports this soundcard.. it doesn't seem to work.
Any other application... CUBASE SX2 or games such as Call of Duty work perfectly fine with all channels.
Can anyone help me?
Can you recommend any other 8 channel software DVD playback software?
Thanks
- Ben
[email protected]

first of all your questions ain't stupid...you got to learn/understand once right?
**bleep** 3 yrs ago i thought i knew digital audio (mp3/wave on PC and Philips DCC recorder) but then came Dolby Digital & hardwaredecoding...LOL... Lots of differences in channelprocessing & so misconfiguration possible.
Well I hope you didn't uninstall your dvd player software... I mean software audiodecoding like matrixmixer(that you can find in codecpacks, all **bleep** that uses directx this because most of it is max 6bit LOL) ..your talking about all your extra dvd software.(but you don't need their extra audio playing features). Just select the sp-dif audio in WinDVd PowerDVD or NVDVD whateverDVD and then go check the creative soundcard speakersetup(not the windows speakersetup , but prefer to use the creative surroundmixer (click the THX logo/icon under in the creative mixer, and calibrate analog speaker output) etc.
You only need the player 4 dvd playing acces. (DVD-V DVD-A) (prefer the dvd-player for dvd-A in sp-dif mode because then you'll see that some dvd-A's have some videoclips or images. and do check the site of www.slysoft.com and score it in any way )
.. by the way don't forget this about your analog output 3.5mm jacks on the back og the card:
first channel = 3.5mm 3-pole jack (stereo)
second and third channel = 3.5mm 4-pole jack (stereo portable camera cable works (3xrca).
so don't use stereo jacks on the 2nd & 3th channel...
You can use a portable stereo camera cable because the've on one side 3xrca(yellow/white/red) and on the other side a plastic 4-pole minijack (plastic=preferred because you probably need to make the 4-pole jack smaller with a metal file (be careful not to harm the cable) these cable's are standard and so very cheap. standard meter long.
Final joke: It's nice to have THX@Soundcard + THC@head greetings from a late in the evening Amsterdam NL.Message Edited by www_96KHz_tk on 05-24-2005 08:20 AM

Audigy ZS Bug with Vista 32 b

Hi, (I?beg your pardon?for my english)?When I install a Audigy? 2 ZS Card in my Notebook ACER Aspire 9302WSMi I never can use the microphone.(Vista 32bits)?Message Edited by PhBaum on 0-9-200709:02 AM

I realize you're using the PCMCIA version so this may not apply.
But the Audigy?2 ZS PCI version has many issues with Vista 32.
My most annoying issue is very low volume output.
Creative is unable or unwilling to fix these issues.
Last driver update was 8 months ago.
It is so bad that I am now using my motherboard's integrated sound (SigmaTel)
You may want to dump this card and get different brand.
Once upon a time I had a perfectly good Creative webcam running on win 98.
Creative didn?t support it on XP.
Needless to say I didn't buy another Creative webcam.
Needless to say I won't be buying another Creative soundcard either.
Message Edited by Bhagwan on 0-9-200706:52 PM
Message Edited by Bhagwan on 0-9-200706:53 PM

Audigy 2 ZS Platinum Vista 32bit full support

Similar Messages

Maybe you are looking for