Audigy 2 ZS Platunum Pro (working with vista x64 beta

Just posting to let all you people know the Audigy 2 ZS does actualy work with vista beta 2 64bit the drivers them self do not work nor do any of the others but if you play around with them for a few hours (not using this work around which sucks) you can get them to work.
All I used was the drivers for XP 64bit and the Beta drivers with the XP drivers in first then uninstalled then put the new drivers in after.
Problem is for now they only work in stereo, though the breakout box does work with the voilume and such.
So dont give up sound will come from your audigy 2 zs just not very easly :P
EDIT: Well it seems that most people know this now, anyone got a sound way to get 5. working?Message Edited by Cafuddled on 06--2006 :2 AM

I would like to add my two cents to this. I had an RM-500 which stopped working after a while. My MCE IR receiver seemed to pick up an infra-red signal from the thing but the dri've bay didn't respond.
I then tried an older RM-900 from an old Audigy installation and that worked perfectly with the dri've bay. So in my case, the RM-500 was dead ( the battery was ok ).

Similar Messages

  • Bought a 2GB Zen, not working with Vista X64

    Hi guys,
    I'm having major troubles here, I can't seem to sync it with Vista X64 no matter what methods I tried, its the 2GB version with the 2.5inch screen.
    I can't even transfer songs since the media center kept saying no player connected.
    What is the problem here exactly? I didn't just pay $00+ for a useless product didn't I?

    What program are you trying to sync with? Can you find the player in Device Manager? If so what does it report about it's status?

  • Anyway to get an Ipod to work with Vista X64?

    I recently built a computer under Vista X64 and remarkably enough, the most manufactured piece of hardware I hook up to it is the only one that isn't supported by its manufacture. Whether or not this is extreme incompetence or complications, I will never truly know but anyways....
    Is there anyway to sync an Ipod with a 64bit version of Windows Vista. I don't care whether it is through Itunes or not, I just need to be able to add and remove video and music from my Ipod.

    You can try Winamp or Xplay.

  • AUDIGY 2 ZS doesnt works with vista ultimate

    The problem is, when i try to install the drivers SBAX_PCDVTBETA_US_2_2_000, this message below appear to me:?"Setup is unable to detect a supported product on your system.Please ensure that your product is properly installed beforerunning this Setup program.Setup will exit."?The point is before this, Vista tries to find the driver to my Audigy 2 ZS without any success... So, any body knows some solution for this?ThanksByron

    I have the same problem with Vista home premium. I've tried every driver possibilities, I reinstalled the original disks and then the Vista beta drivers and my card still isn't being recognized. My computer can play sound but all of the advanced features of my sound card are unavailable.

  • T61 Sound Controls Not working with vista x64

    I recently upgraded from vista ultimate to vista 64 bit, and since the install, the sound controls do not work.  now, I know i need a special driver to make them work, but can anyone point me to the correct one?  Thanks
    T61 15.4" T9300 (2.5GHz 6MB L2) Windows 7 Professional x64 4GB Memory, NVidia Quadro NVS 140M
    Solved!
    Go to Solution.

    You need to install the HotKey driver.
    As a thought, you may like to add this site to your favourites.
    Andy  ______________________________________
    Please remember to come back and mark the post that you feel solved your question as the solution, it earns the member + points
    Did you find a post helpfull? You can thank the member by clicking on the star to the left awarding them Kudos Please add your type, model number and OS to your signature, it helps to help you. Forum Search Option T430 2347-G7U W8 x64, Yoga 10 HD+, Tablet 1838-2BG, T61p 6460-67G W7 x64, T43p 2668-G2G XP, T23 2647-9LG XP, plus a few more. FYI Unsolicited Personal Messages will be ignored.
      Deutsche Community     Comunidad en Español    English Community Русскоязычное Сообщество
    PepperonI blog 

  • Acrobat Problem with Vista X64 OLE calls

    Acrobat Problem with Vista X64 OLE calls - CreateObject("AcroExch.AVDoc") does NOT open its window in the CreateObject("AcroExch.App") - but opens a new (invisible) window. Works correctly in XP x64 and 32 bit Vista - happens with Acrobat v8 and v9.

    Again, I contend that something changed between 8.1.2 and 8.1.3.
    refer to http://www.adobeforums.com/webx/.59b6fe7c
    To show the viewer, use the show method after the document is opened.
    In 8.1.2 you did not have to perform this extra step.

  • Itunes not working with Vista Home Premium 32-bit

    Itumes 10.6.3 version will not work with Vista Home Premium. I have a 32-bit operating system. I'm not sure what to do next. It appears in trying to update it deleted the old itumes, as I can't find a copy of it when I search the computer.

    Then I installed Quicktime on its own - still get the same error 'Quicktime has stopped working;
    Okay. That will be the source of the iTunes problem. (Without a properly working QuickTime, iTunes won't work correctly.)
    Checking on things that can cause QuickTime launch errors now.
    Have you at any stage installed any Codec Packs, any copies of the programs QT Alternative, QT Lite or Storm Codec, or any media converter programs that can convert files into QuickTime readable formats?
    (I'm checking on these things because depending on the versions of the programs/codec-packs, these can install earlier versions of QuickTime componentry on a PC, which can interfere with the running of a higher version of QuickTime.)

  • Mocha Pro Work With AE

    Can "Mocha Pro" work with After Effect???  I know Mocha AE can work with After Effect...but can Mocha Pro???
    Can anyone tell me please.....

    Sure - mocha Pro will work with any version of AE, all the way back to CS3.
    You can either launch mocha Pro as a stand alone app or you can set mocha Pro to launch from AE>Animation menu>Track in mocha. To do this change your user preference in mocha Pro.
    mocha Pro can export to AE: 2D Planar Tracking, 3D Camera Tracking, Roto masks and Lens distortion.

  • Adobe Photoshop 6.0 - will it work with Vista?

    Hey there -
    I bought Photoshop, Illustrator, InDesign, etc in 2001 (I don't know if that is relevant or not), and have Photoshop 6.0, for example.
    My laptop with Windows XP is dying very soon.  I may be forced to get a computer that has Vista.
    Will my software work with Vista?
    I appreciate you help!
    Alex

    I sent myself an email back when I upgraded to Vista, I just looked back and found the email. It had some links in it (which are no longer good), but there was some useful information and troubleshooting guides on there on how to get various older versions to work on Vista machines. I was thinking there was a "trick" on there about setting the date back on the computer or something while reinstalling Illustrator in order to get it to work. I have AI 10 at home as well, but I have not yet installed it on the Vista Machine as I got CS3 and use it on my XP machine just fine.
    If I were you I would hold off as long as you can, like Marian said, and maybe by then CS5 will be out too.

  • I purchased photoshop CS5 for my windows vista operating system. I purchased a canon 7 D some yrs ago no problem. I purchased canon 7D mk 11 in december 2014. The supplied software will not work with vista. Photoshop CS5 will not accept canon7D mk11. Can

    I purchased Photoshop CS5 for my windows vista operating system. I purchased a canon 7 D some yrs ago no problem. I purchased canon 7D mk 11 in December 2014. The supplied software will not work with vista. Photoshop CS5 will not accept canon7D mk11. Can someone please tell me how i process canon 7D mk11 photos ?????. (is it possible to bypass camera raw and open the photo straight into CS5 without using camera raw first. if so how do i do that. if not how do i process pictures).
    Thank you.
    Brian in the UK.

    Photoshop by itself cannot process raw image data. That is why the Camera Raw plug-in was developed. You could try the DNG converter and convert your images to the DNG format and then the Camera Raw that you have would be able to open them. I can't recommend Lightroom because you are using Vista, and Lightroom 5 cannot be used with that operating system. It may be time for you to get a new computer and upgrade your software.

  • Will idvd with a new MacBook Pro work with a DVCAM deck? I'm using firewire to burn a DVD from a DVCAM tape in a Sony DSR-30 deck but it isn't working.

    Will iDVD with a new MacBook Pro work with a DVCAM deck? I'm using firewire to burn a DVD from a DVCAM tape in a Sony DSR-30 deck but it isn't working.

    http://www.lafcpug.org/phorum/read.php?1,268296,268300
    Bit of googling wouldn't go astray.

  • With Vista x64, I can't get exported library restored

    I had to do a system recovery on my laptop. Before I started I exportd my library to my exteranl hard drive.
    After restore andgetting all my updates an such up to date I re-installed iTunes and attempted to restore my library.
    Clearly there was no simple, Import Library function so I went to IiTunes support to find the steps. I followed the steps (http://support.apple.com/kb/ht1451 - How to re-create your iTunes library and playlists but the only thing it has restored is the name of the playlists I created.
    No Songs
    No Apps
    No TV Shows
    No purchases
    Hundreds of items are not available. I did get a warning message that it could not restore some of the songs as they were unavailable (I assume they should be from the CDs I added) but not one song is restored.
    Where did I go wrong?

    According to Adobe's knowledge base, http://www.adobe.com/support/products/pdfs/adobe_products_and_windows_vista.pdf?promoid=DN RTX , you need version 8 with updates or version 9 or better. Acrobat/Reader 8 and below were distributed prior to Microsoft introducing Vista, so they are not compatible. Since Acrobat 8 was close to the introduction of Vista, Adobe provided updates so version 8 could work with Vista.

  • Zire72 is not working with vista. help me please.

    I have a computer with Vista and a Zire72. I don't have the disk that came with it, and have tried to download the software from the website. I am not tech smart and need some simple directions and help.  I have alot of money invested in my palm zire72 and love it but it just doesn't work with vista 64. what can I do?
    Post relates to: Zire 72

    I have sat here for 4 days reading and installing everything I was told to install to be able to sync with my palm.  I am not smart about bluetooth or wi-fi. Geek squad came out and set up my wi-fi in my office. Can someone tell me or give me the A B C's of getting this thing to sync. I don't like the new phones that have everything on it. I love my palm because IT WAS SIMPLE TO USE AND SYNC.  As bad as the economy is I hate to have just wasted $300.00 on a palm that I cannot get to work. .  I have wasted alot of time reading and calling and installing and it still doesn't work. After about 8 hours today I got the desktop to download. No wonder palm is going under.  Help me please !!!!!!! 
    Post relates to: Zire 72

  • Making the WMB54G work with Vista (Service Pack 1) - it does work.

    I posted this in response to a thread, thought it could use its own topic. 
    There is hope and potential success for Vista users!   I got the WMB54G 2 days ago.  I spent 6 hours with it and nearly threw the product AND my computer out the window the first night.  I scoured this forum for the past two days,  and by putting pieces together from various threads,  I'm now using the Music Bridge successfully with my 1 month old Dell XPS M1530 with Vista Home Ultimate with Service pack 1.  Once I had my gameplan,  it worked perfectly the first time I tried the new approach.  I will try to write a step by step process of what I did in the next few days but for now.....
    1.  Throw out the installation CD that comes with the music bridge (its useless for Vista).... I'm kidding, but you get the point.
    2.  You HAVE to dowload the Vista compatible installation utility and Firmware upgrade from the Linksys forum - I don't have the link right now, but its here in this forum. 
    3.  Run the Vista driver setup to install the Musicbridge utility - the "Install utility" link at the bottom of the setup screen, but DO NOT try to configure the router since you'll just have to do it again later. 
    4.  Run the firmware upgrade for the router (it behaves exactly like the setup utility, but instead of configuring the hardware for use, it upgrades the fimware)
    5.  Run the Vista driver setup to configure the router (only after the firmware upgrade).   I didn't have to do anything outside of the auto setup.  i'm using a Linksys wireless G router as well, and it connected with 64 Bit WEP encryption no problem once i entered my encryption passphrase. 
    6.  Open up MSCONFIG and disable the CMFLYWAVE Application on Startup
    7.  In your Program Files directory,  find \Linksys\wmb54g\wmb54g.exe,  \Linksys\wmb54g\driver\cmas2ds.exe, and \Linksys\wmb54g\driver\cmflywav.exe - For all three files,  right click and go to Properties\compatability.   Check the "Run this program in compatability mode for:"   pick XP with SP 2.   
    THANK YOU SO MUCH TO THE PEOPLE WHO POSTED THAT LAST BIT!!!!
    8.  I'd suggest restarting the computer now. 
    9.  You might get a "WMB54G.exe has stopped running error" on restart... that's ok
    10.  Start the following files in this order:
    cmas2ds.exe
    cmflywav.exe
    wmb54g.exe
    11.  The utility should start, and then you can connect to the bridge via the system tray icon.  - you might have to also set the default audio device to the Music Bridge by right clicking your system tray speaker icon
    12.  Uncheck the "Start the Music Bridge when I start Windows" option in the utility screen - and execute the three files in step 10 each time you restart. 
    I hope this works for you. 
    Solved!
    Go to Solution.

    I finally got my WMB54G to work with Vista SR1.    It took me 4 hours of struggling to figure it out though.
    What I did was:
    1. Download the latest utility and firmware from the linksys support site.
    2. To set up the device, preferably use http://192.168.1.210.  There are http setup instructions on the linksys customer service site.  Alternately, you can use the setup wizard on the CD but I would recommend avoiding it if you can.  If you do use the setup CD and it installs the WMB54G utility, promptly uninstall the utility afterwords and restart the computer.
    3. Update the firmware to v.2.18 by using http://192.168.1.210 and going to the HELP tab
    4. Install the latest utility from the support site but do not run the main setup.  Simply run setup.exe in the utility folder AND GIVE IT PLENTY OF TIME.  Walk Away and let the installer finish and close.  Then do the thing people discovered -- edit the properties of C:\Program Files\Linksys\WMB54G.exe and make sure it is set for running in XP compatability mode.
    5. Restart the computer
    Mine started working fine after I did all of this -- the WMB54G came up automatically and found the device.  Keep in mind I do not have WEP or anything -- just unsecured wireless.
    Good luck.
    Mike
    Message Edited by jmfife on 01-17-2009 10:51 AM
    Message Edited by jmfife on 01-17-2009 10:54 AM
    (Mod Note: Edited due to non-compliance of forum guidelines.)
    Message Edited by giantherockstar on 01-17-2009 11:05 AM

  • Sound blaster audigy 2 zs not working with vi

    ok so my sound blaster worked fine with xp and i upgraded to vista and it isnt working at all. i tried to install the driver from creative's site that is supposed to work with vista. when i run the install it says it is missing a bunch of files like layout.bin and setup.exe, setup.ini,and a bunch of crap like that...i even tried getting these files from somewhere else and putting them in the install folder, it ran without missing files but gave me the same error at the end, I-00. THEN i even tried using the cd it came with when i bought the card on xp, it worked with a few minor errors but at the end it recognized my card but i get absolutely no sound at all...

    The problem you are getting has to do with InstallShield and most probably your?Vista configuration... Make sure you are running as administrator and check the log files in the Program Files/InstallShield... folder to see exactly what files you are missing. There is a Creative Knowledgebase article about it, so do read it. Also do remove any Creative XP software, especially make sure you removed the InstallShield Creative folders (in the same location as above), as these have been known to cause Installation failures.

Maybe you are looking for