Audigy 2 ZS software insists card is not install

I am using WindowsXP SP2 and a 2ZS, and everything was fine until I reinstalled the current audio drivers. The drivers installed properly, both Windows and other programs (DirectX as well) see the card as working and installed properly. EAX works in games, Winamp works as it always has. However all of the Creative Programs such as Surround Mixer, THX console, Speaker settings, all report "no installed hardware" or "no compatible hardware".
The only thing that works is the Audio Console, I can set EAX and CMSS there (I'm using 5. analog). I have done everything, swap slots, used a registry cleaner, even reinstalled Windows (not a full format and install, just an overwrite). I have the original install cd(s), they also report no hardware.
I am pretty knowledgeable in these things and yet I'm stumped. Any ideas? nForce4 SLI, with current chipset drivers, current forceware drivers, everything seems in order, even in the registry, which I have a lot of experience in pruning keys. Driver Cleaner has been applied as well redundantly.
I had one USB audio device as well, the logitech wireless dj, but that has been removed as well, and not yet reinstalled. While I suspected it as being the system default device, it wasn't. Any ideas welcomed...

I tried the cleansweep per your instructions and then re-installed the card. But still have the same problems. Also, a small gray box appears at the top center of the display at startup, like a program tried to run but could not.
Any help would be appreciated.
Sundance

Similar Messages

Recently I started having this problem with the Iphone5 IO7 software it says " SIM Card is not Installed" while it fixed the problem by repeated turn on and off but comes again on the second day

I am sure apple must be working on a patch or an io7 update. I keep on getting this msg while calling and phone does not receive any incoming calls when it displays a msg saying "SIM card is not installed". I would appreciate if apple try to resolve this software problem asap. Thanks

Hi apple954!
I have an article for you that can help you troubleshoot SIM issues with your iPhone:
iPhone: Troubleshooting No SIM
http://support.apple.com/kb/ts4148
Take care, and thanks for visiting the Apple Support Communities.
Cheers,
Braden

Snow Leapard Is saying that my wifi card is not installed

Snow Leapard Is saying that my wifi card is not installed. When It worked before. should i reinstall the os?

NO love on this huh! come on guys and gals you know the answer! Help

My phone blacked out, re-set it and now says my sim card is not installed! Help!

What do I do if my phone blacked out, then re-set it, but now says my sim card is not installed!

Honestly it sounds like you purchased a no-contract phone and not an unlocked phone.
Without the receipt it is impossible to say what was really purchased. Contact Apple to get a copy of the receipt. If you did infact purchase an unlocked iPhone, then they will resolve it.
What model iPhone do you actually have? Paying $700 for and iPhone 4 would have meant it was purchased approximately 2yrs ago. Also, there is no 35gb model.
If it is the iPhone 5, the unlocked version was not available at launch but rather released (online only) on November 30th. Later it was available in store.

IPod software 1.1 will NOT install.

new ipod nano for Xmas.
Latest version of software 1.1 will NOT install.
I get a message saying "new version available", i tell it to install, it extracts, turns ipod on and off, but when it eventually comes back...it says:
"New version available" and it still has it's own version of 1.0.3 listed.
I tried Restore with "current(1.0.3)".
I tried Restore with "new" version.
Nothing.

GOT IT TO WORK!
HOWEVER The way i got it to work was to go to a completely different machine download 1.1 there and apply by hooking up iPod.
As much as I love my iPOd, there are some serious issues with iTunes + iPod + Windows

I just tried to install Photoshop 4.0 to my iMac (version 10.9.3) and I was informed that there was an error with the software. I could not install it. Where do I go from here?

I just tried to install Photoshop 4.0 to my iMac (version 10.9.3) and I was informed that there was an error with the software. I could not install it. Where do I go from here?

Photoshop 4.0 is not compatible with MAC 10.9.3 . You will face issues as when Photoshop 4.0 was launched there was no MAC Mavericks and Adobe has not tested the version on new MAC OS.
If you want you can download the latest version of Photoshop CC 2014 and you can use it as a trial for 30 days and you can plan to switch to the latest version.
http://www.adobe.com/products/photoshop.html

Software updates sometimes do not install. I have two software updates that I continually show up as available to install. When I click on the install button it changes to installed. Checked About this Mac shows that the updates have not installed.

Software updates sometimes do not install. I have two software updates that I continually show up as available to install. When I click on the install button it changes to installed. Checked About this Mac shows that the updates have not installed.

What are the updates?

C6180 All In One Photosmart. Software and drivers will not install on Windows 8.

C6180 All In One Photosmart
on
Windows 8 64bit
Acer Aspire V5-552PG
AMD A10- 5757M
Radeon HD 8750M dedicated
Software and drivers package will only unpack but not install.
When the unpacking bar reaches the end, it disapears without any following actions.
I have of course tried it over again many times, and I have deleted the download and redownloaded it again but the same happens every time.
Any idea on how to solve this?
Sincerly
FLFO

HI FLFO:
I have done some research on your post. I have found a document with steps to help resolve the stall you're experiencing during your printer installation.
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00836418&tmp_task=solveCategory&cc=us&dlc=en&lc...
Happytohelp01
Regards,
Happytohelp01
Please click on the Thumbs Up on the right to say “Thanks” for helping!
Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
I work on behalf of HP

Software purchased but will not install?

I purchased Pages ... it shows under my purchases, but when it started to install I lost internet connectivity ... now it will not install.

Ok.. that's what I needed to know.
Try re downloading the app ...
Open the App Store. From the menu bar click Store > Sign In
Click Purchases from the top of the App Store window.
Select which apps you want to re download. Then right or control click where you see Installed then click Install.
Make sure and use the same Apple ID used for the original purchase.

Video card will not install properly

Hi, I have an HP Pavillion a6120n. I am trying to install a Radion HD 5450 video card (view links below for pc and video card). I have upgraded my psu to an Ultra LSP 750w and disabled the on-board graphics. However, no matter which way I try to install the video card (while running the pc or not) and rebooting, my monitor says "No Signal Detected". Furthermore, when I try to install the software for the video card from the CD, it goes through the entire install process and says that it is complete but the file never shows up in the folder that it is supposed to. Basically, whenever the new video card is attached to the motherboard, the PC doesn't like it and I get no display.
My BIOS version is 4/20/07. I can change the video setting to [PCI] or [On Board] but nothing more than that, like PCIE. Is there a new BIOS version that I haven't found?
Should I be looking at a different video card? Is this one not compatable for some reason?
Any ideas here? I'm stumped.
Thanks so much for your help. Glad HP does this.
PC: http://h10010.www1.hp.com/wwpc/ca/en/ho/WF06b/12132708-12133156-12133158-12133158-12133158-80230663-...
Video Card: http://www.tigerdirect.com/applications/searchtools/item-details.asp?EdpNo=149617&SRCCODE=WEBGOOPA&c...
This question was solved.
View Solution.

I dont see any reason why that card wont work.
Make sure the card is seated and the lock on the tail end of the card is engaged.
PCIe slots are sometimes a little tricky getting seated.
Also make sure it is not binding against the back plate on the computers chassis
where the ports come out the back. It sould seat comfortably.

Scanning software for ScanJet G3110 not installing

I have downloaded the latest version of the recommended software directly from the HP support site. OS is Win7 64 bit. The setup ends in few instants with no error messages but I have not desktop shortcut icons. The setup creates folder: "C:\Program Files (x86)\HP\" with just two subfolders: "Temp" and "Digital Imaging". Inside Digital Imaging folders I can't found many application files and there isn't the \bin\hpqkygrp.exe application.
On a pc with windows VISTA and default CD installer evertything works fine.
I noticed that many files missing from setup, like Common folder. The pc is in a network domain and I launched the setup as both domain user and domain administrator.
I tried many times in different days/months/updates... please help.
This question was solved.
View Solution.

Hi @MauroRulli
I would like to help you with the software troubles you are having. Please try the following steps;
Hold down the Windows Logo key () on the keyboard and the 'R' to open the run box, type %temp%
Delete all files and folders from the temp folder. Choose skip if any pop ups appear saying any of the files could not be deleted
Uninstall the software again - Uninstalling the Software Instructions
When the uninstall has completed restart the computer
Follow these steps to reset the registry settings and options for Windows Installer.
Hold down the Windows Logo key on the keyboard and the 'R' to open the run box
In the Open box, type msiexec /unregister, and then click OK.
Hold down the Windows Logo key on the keyboard and the 'R' to open the run box
In the Open box, type msiexec /regserver, and then click OK
*Note: there is a space between the c and the /
If you have any difficulty with this step, please use this link to perform it another way. Restarting Windows Installer
Run Disk cleanup from Accessories\ System Tool < How to Delete files using Disk Cleanup
Download and install the latest version of Adobe flash player http://www.adobe.com/support/flashplayer/downloads.html
Restart the computer
Download and install the software for your Scanjet again. HP Scanjet G3110 Full Feature Software and Driver
Please let me know the outcome of your efforts. Thanks.
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP

F4140 not working. cant remove, software says it's not installed but then wont re-install

The printer isn't working so I want to remove and re-install BUT the printer is not in Add/Remove Programs (I have XP). I downloaded the complete install package and tried to uninstall it that way, but the unistall program says nothing is installed. So I tried to install it but it says the software is already installed and doesn't install anything. I am really stuck this time. I wish HP had a "cleaner" utility because obviously the registry or something is out of synch. Please HELP!
This question was solved.
View Solution.

Hey there,
Here is how you can uninstall using the scrubber that is built into the software. I included both options on how to access the scrubber. Just choose whatever option is easiest for you.
Option 1: From Original installation CD:
1. Insert CD into drive, and then cancel the installer
2. Open My Computer, and then right click on the CD drive and chose open
3. Open folder Util
4. Open folder CCC
5. If you have an HP computer run the L3uninstall.exe. If you have a non-HP computer run the L4uninstall.exe
6. When the uninstall has completed restart the computer
7. Run Disk cleanup from Accessories\ System Tools
8. Download and install the latest version of Adobe flash player
http://www.adobe.com/support/flashplayer/downloads.html
9. Download the full feature software and drivers
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=al-64285-2&cc=us&dlc=en&lc=en&...
10. Run the download to reinstall the printer
Option 2: If software was downloaded and extracted to your system:
1. Type %temp% in the run field
2. Look for, and open the folder starting with 7z (Example: 7zS2356)
3. Open folder Util
4. Open folder CCC
5. If you have an HP computer run the L3uninstall.exe. If you have a non-HP computer run the L4uninstall.exe
6. When the uninstall has completed restart the computer
7. Run Disk cleanup from Accessories\ System Tools
8. Download and install the latest version of Adobe flash player
http://www.adobe.com/support/flashplayer/downloads.html
9. Download the full feature software and drivers
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=al-64285-2&cc=us&dlc=en&lc=en&...
10. Run the download to reinstall the printer
Hope this helps!
-Sean
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

Error mess software updates -installer could not install some files in "/"

I get this message regardless of the software update. Just started today. Has anyone else had this issue? If so, any idea how to fix. Thanks so much in advance!

There may be an error in the computer's directory, requiring a repair; some kinds
of errors or damage to the data in the hard drive are not responsive to attempts
to use the booted Disk Utility version on the OS X Installer disc #1, and while it
may be worth a try to see if that Disk Utility could at least give it a go, the usual
kinds of third party disk utilities (if this is the case, a directory error or damage)
would be along the lines of DiskWarrior, to rebuild or replace a directory.
The slashmark / usually indicates the mount point, of the internal main hard disk
drive partition used by the OS X. So, there may be other reasons why the update
installer does not appear to be working correctly or at all in this matter.
I've not seen such an error message before; but for general maintenance and
before any issues would arise, I try and do preventative maintenance; to include
startup in SafeBoot (shift key held until login screen) and then run Disk Utility to
'repair disk permissions' on Macintosh HD; then when done, note repair logs.
And restart the computer normally. {Also, I have & use Titanium Software OnyX
in its Automation mode every month or two; and choose all checkboxes. This
is also set to automatically restart when the tasks are completed. + It is free.}
To start the computer from the Installer disc and run Disk Utility from there,
involves holding the C key on restart with the OS X install disc #1 in the
optical drive; and when in the Installer, often a second window where there
is a main Installer menu bar, there are drop-down menus from clickable words
across the top bar. Various options are there, and Disk Utility is among them.
This version of Disk Utility can be used to repair disk, repair disk permissions,
and also there are other more active tools among its utility features. This is an
installer, too; with options of several kinds. The Utility can also reformat, etc.
So be careful in what you choose to run. The repair disk and repair permissions
are both ones that may be a bit helpful, at least in the process of elimination.
If the directory is bad, a retail DiskWarrior utility may need to be purchased from
a Mac-friendly vendor; be sure that DW version covers your OS X system level.
Good luck & happy computing!

I have just tried to upgrade to the new software update and I can no longer access iTunes. I have uninstalled and downloaded the latest software but it will not install. Any help please?

I have just tried to update iTunes to the latest software and now I keep getting error messages. I have uninstalled and downloaded the latest version without any success. Any advice please?

Download the Windows Installer CleanUp utility from the following page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
http://majorgeeks.com/download.php?det=4459
To install the utility, doubleclick the msicuu2.exe file you downloaded.
Now run the utility ("Start > All Programs > Windows Install Clean Up"). In the list of programs that appears in CleanUp, select any Bonjour entries and click "Remove", as per the following screenshot:
Quit out of CleanUp, restart the PC and try another install. Does it go through this time?

I am connected to wifi, but the signal bars in my menu bar say that the airport card is not installed. Any ideas?

I just updated my mbp with the icloud update and now my wifi signal bars in my menu bar stopped working and say that there is no airport card installed. I am connected to the internet through wifi just fine and the system preferences says that I am connected, just weird that the menu bar signal stopped working. if there is no fix, is ther an alternate wifi signal bar that i can put up there?
Thanks for the help.

anyone?

Audigy 2 ZS software insists card is not install

Similar Messages

Maybe you are looking for