Audigy 2 ZS - Sound works but output is extremely qui
Hi all.
I just finished building my rig:
AMD 64bit 3500
dfi Lanparty UT nF4 Ultra-D (newest bios)
eVGA geforce 7800 GT
hitatchi 60gb sata hard dri've
2Gb Corsair XMS PC3200
Audigy 2 ZS
zippy 500w PSU
NEC DVD-burner
However, i was bummed out when i tried to listen to music via winamp. In order to hear any sound at all i have to crank the speaker volume up to max. Although the sound is not distorted, it is too low for me to settle for.
onboard sound is disabled.
cleansweeped multiple times.
bios updated.
multiple driver installs
tested the card in another machine (it worked and sounded fine)
There are no IRQ conflicts
I want my audigy to work ****it!
HELP!
First things first. W00t. nice system
Ok, wipeing drool off my face. Cheak all media source settings for volume and wav and raise them.
Windows volume control, also raise them.
Similar Messages
-
When I try to play a video the sound works, but I get a green screen and no video.
What is your operating system? If Windows, see http://forums.adobe.com/thread/945765
-
Why when I try to play an avi video on my iMac the sound works but why not the picture?
Why when I try to play an avi video on my iMac the sound works but not the picture? I need codecs but xvid doesn't support Macs.
Maybe I should figure out if and how to use torrents and forget about using QuickTime.Try VLC, can play almost any format known to man...
http://www.videolan.org/vlc/
Or you can install the Perian extension to Quicktime to allow for Xvid playback.....
http://perian.org/ -
Audigy 2 ZS+Sounds works only if mediaplayer has played some video and you leave mediaplayer
sounds work only in movies with mediaplayer..i have installed ffdshow what pops up when i start videos..if i try to play winamp only, music plays only -2 second and stops but with mediaplayer on backround it will play mp3..
in mediaplayer sounddevice is audigy 2 but winamp directsound output is working only with primary sound device, if i change it to audigy 2 then the music stops
also tryed dxdiag and there sound page..it plays directsound test only if mediaplayer is on..without mediaplayer nothing but at music page it plays that test without mediaplayer on in backround
Even reinstalling WIN XP didn't help..same thing with audigy 2 cd full installion
Can anyone HELP me..And sorry about my bad english
Motherboard is DFI Ultra-DMy guess is that your PowerDVD and WinDVD versions don't have ES support and you're using the programs to decode. This might be the case if you are configuring the programs for multiple speakers. If you are, try configuring them for SPDIF output, then make sure the soundcard is configured to decode AC3/DTS (it probably is). Does that help?
-Dave
[email protected] -
When I plug in my ipod touch the sound works but not the video
I got this app for my kids and I want to play it on my tv the sound works not the video. But when I put the same app on my iphone 4s it works fine on my tv using same cord etc I don't know if there is something I need to do to my ipod to make it work.
The 4G iPod TV (video) out only works with apps that support TV out. The Video app is one such app. The iPhone 4S (and later iPhones, the 5G iPod and iPad 2 and later) on the other hand can mirror the iPod's screen for TV out.
-
Sound works but not when playing music
When i turn on my computer it makes the start up sound. But when i try to play music out of itunes or off the internet, the sound wont work. I know its on, but no sound is coming from the speakers. i have an hp G71
Hi,
It might be worth running Microsofts Automated Fixit for sound playback issues on the link below.
http://support.microsoft.com/gp/no_sound
Best Wishes,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience -
Premiere pro sound works but video lags
i am trying to use premiere pro cc but when i play a clip the sound works great but the video really lags. i have been told that my pc is more than capable of running it
If you lose sounds for keyboard clicks, games or other apps, email notifications and other notifications, system sounds may have been muted.
System sounds can be muted and controlled two different ways. The screen lock rotation can be controlled in the same manner as well.
Settings>General>Use Side Switch to: Mute System sounds. If this option is selected, the switch on the side of the iPad above the volume rocker will mute system sounds.
If you choose Lock Screen Rotation, then the switch locks the screen. If the screen is locked, you will see a lock icon in the upper right corner next to the battery indicator gauge.
If you have the side switch set to lock screen rotation then the system sound control is in the task bar. Double tap the home button and in the task bar at the bottom, swipe all the way to the right. The speaker icon is all the way to the left. Tap on it and system sounds will return.
If you have the side switch set to mute system sounds, then the screen lock rotation can be accessed via the task bar in the same manner as described above.
This support article from Apple explains how the side switch works.
http://support.apple.com/kb/HT4085 -
Et-sdl-sound working, but with problems..
Hi,
I got et-sdl-sound working so that I can play it with sound, but there is a wierd high looping noise for about 5 seconds before the game actually starts, after which it's completely normal. Unfortunately, I'm a perfectionist , so if possible I'd like to remove that annoying very high noise.
Hm, Testing the normal et binary without the et-sdl-sound makes sound work without the wierd noise, but I'd like to have other applications with sound running in the background. And besides, it could stop anytime But I don't know why it suddenly worked, I didn't do the echo command as root to get it working..
Thanks for your help!BUMP.
Any ideas? Sound somehow stops working with the normal et binary, but sometimes it will work.. -
Reinstalled Arch, sound works but not when I login
Hey guys I just reinstalled Arch, card has worked fine before (M-Audio Revolution 7.1). It works fine now, too, as I have a little "welcome.wav" file that plays when I reach GDM on boot, and it plays just fine but as soon as I log in I can't get any sound. I am in the audio group:
bobby@dabox:~$ groups
video audio optical bobby
bobby@dabox:~$
Also here is lsmod output so you can see that it certainly works:
bobby@dabox:~$ lsmod
Module Size Used by
nvidia 7813984 24
pcspkr 3072 0
rtc_cmos 7712 0
rtc_core 15240 1 rtc_cmos
rtc_lib 3072 1 rtc_core
ppp_generic 23956 0
firewire_ohci 15360 0
firewire_core 36416 1 firewire_ohci
crc_itu_t 2432 1 firewire_core
ohci1394 28848 0
ieee1394 80568 1 ohci1394
i2c_i801 8976 0
i2c_core 20096 2 nvidia,i2c_i801
tsdev 6976 0
intel_agp 21780 0
agpgart 27352 2 nvidia,intel_agp
sg 26652 0
evdev 8320 0
thermal 12956 0
processor 28248 1 thermal
fan 4100 0
button 6544 0
battery 10248 0
ac 4356 0
snd_ice1724 76364 0
snd_ice17xx_ak4xxx 3712 1 snd_ice1724
snd_ac97_codec 95396 1 snd_ice1724
snd_pt2258 4096 1 snd_ice1724
snd_i2c 4992 2 snd_ice1724,snd_pt2258
snd_ak4xxx_adda 8320 2 snd_ice1724,snd_ice17xx_ak4xxx
snd_ak4114 8192 1 snd_ice1724
snd_mpu401_uart 7168 1 snd_ice1724
snd_rawmidi 19232 1 snd_mpu401_uart
snd_seq_oss 29568 0
snd_seq_midi_event 6656 1 snd_seq_oss
snd_seq 47056 4 snd_seq_oss,snd_seq_midi_event
snd_seq_device 7052 3 snd_rawmidi,snd_seq_oss,snd_seq
snd_pcm_oss 37152 0
snd_pcm 69124 4 snd_ice1724,snd_ac97_codec,snd_ak4114,snd_pcm_oss
snd_timer 19332 2 snd_seq,snd_pcm
snd_page_alloc 8200 1 snd_pcm
snd_mixer_oss 14592 1 snd_pcm_oss
snd 45476 15 snd_ice1724,snd_ac97_codec,snd_pt2258,snd_i2c,snd_ak4xxx_adda,snd_ak4114,snd_mpu401_uart,snd_rawmidi,snd_seq_oss,snd_seq,snd_seq_device,snd_pcm_oss,snd_pcm,snd_timer,snd_mixer_oss
soundcore 6496 1 snd
ac97_bus 2432 1 snd_ac97_codec
slhc 5760 1 ppp_generic
sky2 40324 0
usbhid 40000 0
hid 28160 1 usbhid
ff_memless 5256 1 usbhid
ext3 119944 9
jbd 54568 1 ext3
mbcache 7040 1 ext3
sr_mod 14884 0
cdrom 34080 1 sr_mod
sd_mod 23040 12
ehci_hcd 32140 0
uhci_hcd 22544 0
usbcore 123016 4 usbhid,ehci_hcd,uhci_hcd
ata_piix 13572 10
ahci 20356 0
ata_generic 5380 0
pata_jmicron 4736 0
libata 105968 4 ata_piix,ahci,ata_generic,pata_jmicron
bobby@dabox:~$
Any ideas???You need to store the alsa "state" once (alsactl) before using the alsa daemon for this task.
That caused me some confusion recently as well. -
Insignia LCD 32 inch TV sound (works, but really fuzzy/lame)
just yesterday i purchased the 32 inch dvd/TV LCD. Set up was easy, but wow, the sound is awful especially on non HD channels..it was really bad when I went to watch a show in the Comcast OnDemand section.
It's sort of a fuzzy/static-y sound. Anyone have this problem? i know it's not a top of the line unit, but c'mon...I have HD coaxial cable into cable box from the wall obviously, and HDMI cable running from box to TV.
Thanks for any suggestions. I was thinking about returning the TV.I don't have any problems with the sound on my 32" Insignia or my 22" except my 22 is very low but sounds great. Try hooking up an audio rca jack or a different HDMI cable incase the one you have it defective. If that doesn't work then yes I would return the TV as it sound defective. The stores usually have the TV's on for you I would check the sound of one of them sitting on the shelf.
Also check the reviews on the specific model number that you purchased. -
I am trying to get air play mirroring working on my mid 2011 Mac book pro and Apple TV 3 (latest one) with mountain lion. I have the icon, it seems to connect to each other, and the screen shows up on my apple TV, yet it doesnt update, takes a long time to show up at all, just keeps showing the same screen. However, the audio works fine, I tried to play a Xfinity stream through safari, the video didnt show up on apple TV but the sound came through with no delay. Any ideas?
thanks for the help.... even thought it didn't work...
basically I think i either have some virus or this is the result of that stupid update I did... I know i did that keyboard one an itunes one a quicktime one and there might've been another. -
Network manager works, but outputs lots of messages...
Hello, well, I have installed gnome-network-manager. It works good, but I have one question:
On botting and shutdown, network manager outputs lots of painful messages. What are these messages? Is there any way to remove them?
I think that networkmanager needs an update for arch...
Greetingshungsonbk wrote:
I don't know why you guys use GUI to manage your network. Command Line is the most powerful. Try to use ifconfig, route, netstat, dhcpcd, and so on to manage your network and you will study more from that.
If you still prefer GUI, why don't move to other distros like stupid Fedora Core distro ?
I was going to post a reply, but your post is so ignorant I'm not even going to try... -
QTVRAS - works but output is scrambled
Is there any way to make QTVR Authoring Studio work correctly on OSX 10.4.8 ?
The app runs fine and seems to do everything correctly, but the output panos have scrambled images.
Help!I think you are using QTVRAS on OS9 Classic. QTVRAS was a wonderfull program on OS 9 but is not translated on OSX. I have a G4 with Classic and I will try to do a QTVR scene as in the old time and write you back. Why a OSX version of Quicktime VR authoring studio is not on the market ?
-
Sound works, but not internet
I've been able to get music to play through my airport extreme, but when I try the internet it's like the ethernet cable isn't plugged into the station. I updated my address information with the broadband service (surewest) and have been working on the DNS settings; but after hours of this I have to admit that I don't have what it takes to get the internet to this laptop on this connection with this hardware..
Is there anyone who knows what to do?
ThanksI've been able to get music to play through my airport extreme, but when I try the internet it's like the ethernet cable isn't plugged into the station.
I believe you mean the AirPort Express Base Station (AX), not the AirPort Extreme Base Station (AEBS)...correct? (ref: http://docs.info.apple.com/article.html?artnum=107908)
I updated my address information with the broadband service (surewest) and have been working on the DNS settings; but after hours of this I have to admit that I don't have what it takes to get the internet to this laptop on this connection with this hardware.
I'm a bit unclear on what type of Internet service SureWest provides--DSL or cable. I did note that they recently changed their DNS servers, which might be the problem you're experiencing with their service. (ref: http://www.surewest.com/dns/)
Was this working before? That is, did you have the AX connected to the modem provided by SureWest and were able to get Internet access, or is this a new set up and are having problems getting it going? In either case, what make/model is the DSL/cable modem that SureWest provided with their service? Also, what is your current network configuration? Is it something like the following:
DSL/Cable modem > (Ethernet cable) > [Ethernet port] AX > (wireless) > wireless clients -
Mailbox sound on iMac is not working. All other sound works but not mailbox.
I can play music, hear videos, etc. But there is no sound when checking for new mail or sending out new e-mails.
Mail ▹ Preferences ▹ General ▹ New messages sound: choose one
Play sounds for other mail actions: check
Maybe you are looking for
-
How do I get rid of the 'Main Report' static text box in CR 2008 viewer?
It sits in the upper left hand corner. It takes up way too much real estate. Thanks.
-
How to save a open request with open hub?
Dear experts, we want to save a query result in an open hub destination. So at first we want to store the data in an ods object (we use bw 3.5) which was filled by the apd. The we want to tranfer the delta to the open hub destination which is connect
-
No 1680x1050 Resolution for External Monitor?
Hello, forum friends! So after getting a very nice 22"-ish Envision Monitor connected via VGA to my 2011 Macbook Pro, it appears that there is no option for the monitor's recommended resolution, which is 1680x1050! The highest level resolution is 160
-
An app was purchased even though I clicked to stop it before hand and took my card details off. Now I've been charged how do I get this app off and get a refund?
-
Toolbar does not appear except for little arrows for drop down
Premier Elements 8 running on Windows 7 - on the top of the page the organizer icon appear (small box containing smaller boxes) and then there's a blank space for few inches, them a small right arrow with a dropdown icon. When i click the arrow the