Audigy 2 ZS/ Teamspeak/ Mic Problems/ SOL

I gather from other posts im not the first and probably not the last to have problems with my SB card and Teamspeak Mic function, after MANY painful hours of reading this forum, downloading drivers, reinstalling software and countless tweaks to my SB mixer and Teamspeak options I finally got my Mic to work right. Hopefully my pain will help someone one else, I was ready to give up on my Mic/SB card ever working right till I stumbled on what appears to be the fix to to Mic problem, I made so many changes I will list them all as Im not sure that it isnt the combination of any or all things that made it work,
My set up, front Mic and Headphone jack on computer,
-Go to SB mixer function, above the first volume knob is a red arrow, click on it, it will say digital only output, SELECT this option, turn volume up
-reading left to right on the middle part of the mixer, turn the function ON the first 3, turn off the the following 3.
- the 6th funtion should be set to microphone, click on red arrow above mic picture and turn on mic boost function.
-Teamspeak setting, go to options screen select "wave" sound, click ok and adjust in and out volumes on settings panel.
This did it for me, I went from no mic, to fuzzy mic, to crystal clear mic after playing with things for 2 days.
I have new faith in my SB card and hope others are smarter than me and figure it out with out all the research good luck.

In the Creative Mixer on the right hand side you should see a separate column with a "Rec" heading. There should be a small upside-down triangle. Click on that and you should get a list. Choose "Analog Mix" which includes Microphone, Line-In, etc. Then to the left, un-mute the source you want.
ErictheRed wrote:
Happy New Year to all.
I have installed 2 ZS card. Output works well. I want to record a couple of old vinyl albums. I cant either through Creative Surround mixer or through windows get either a Line-in or microphone input to select from. I have tried everything but this forum. If anybody has any ideas it would be greatly appreciated.
Thanks
Eric

Similar Messages

SB Audigy 2 ZS Mic Problems with COD4. please Help

Ok. Heres my problem. When I start my Call Of Duty 4 Game, My Mic's volume turns itself all the way down, if I close the game, it resumes at max volume. On teamspeak Im always being told i sound real low. i've tried to turn the mic boost on, wont work, and its a pain to not , be heard, and 2 alt tab out of the game to turn my mic up each time. Ive tried other programs like ventrillo, works well and mic sounds louder. but the group of people i play with use teamspeak. Ive read numerous posts, and have tried lots of solutions but cant seem to figure this one out. any ideas, please share.Message Edited by JDuck87 on 03-2-2009 0:6 [email protected]

make sure your have set up microphone in sound option and not "What you hear"Double click the Creative sound menu buttom right, and make sure its microphone thats in the far right?Put the volume to the max to might be that also, even try to use the 20db boost

Audigy 2 zs, mic problems, please please help!a

Hi everyone. I have the audigy 2 zs sound card, i got a new headset with mic today however, i am trying to play battlefield 242, but no one can hear me and i can hear them. I have tried recording my voice but to no avail, i have tried in acoustica and even windows movie maker.
I have tried all available slots for the jack to go in, but still it wont work. Can someone please please help?

make sure your have set up microphone in sound option and not "What you hear"Double click the Creative sound menu buttom right, and make sure its microphone thats in the far right?Put the volume to the max to might be that also, even try to use the 20db boost

Help needed with HTC One regarding mic problem with noise cancellation

I picked up an HTC One last week, and so far I am loving the phone. Great build quality, screen, sound - all as advertised.
However, there is one very annoying problem I am having. When I am talking to someone, I can gear them great, but they keep telling me I sound muffled or robotic. I performed some tests, and the problem appears to be something with the dual microphones and the HTC One's noise cancellation features.
Here are the tests I ran:
Typical phone call, with holding the phone as I normally do on the sides and to my ear. Call result, pretty muffled voice. I'd give the call quality a 5/10.
Help the phone as I typically do, but covered the mic hole on the back of the phone. This definatelyimproved call quality. Was louder and clearer, but not perfect. I'd rate it at 8/10.
Help the phone towards the bottom, using my hand to kind of cup the bottom directing the sound to the bottom mic. This was a further improvement in sound quality. Rating would be 9/10.
Help phone as normal, but covered the bottom mic hole. Very low volume and muffled sound. Rating a 4/10.
Talked directly into the bottom of the phone into the bottom mic. This gave perfect call quality and volume. Rating a 10/10!
Talked directly into the mic on the back of the phone. Horrible quality, couldn't hear hardly anything. Rating 0/10.
Speaker phone on, held the phone up and moved it around as I would normally use a speaker phone. Call quality was really nice. Id give it 9/10.
Speaker phone on, covered back mic hole and used speaker phone as in #7. Very bad quality, rating 1/10 for call quality.
Speaker phone on, covered bottom mic and help speaker phone in hand. Really good quality, even an improvement over test #7. Would give the call quality a 9.5/10.
Speaker phone on, placed face down on table. Volume a bit low, a little muffled. Call quality 6/10.
Speaker phone on, place face up on table. A bit worse than test #10, low volume and a bit muffled. Call quality is 5/10.
Based on these tests, I know this problem has nothing to do with the network CDMA connection. It is obvious that the noise cancellation features are a bit too aggressive, or I have some hardware problem with one or both mics.
I question wether its really a hardware mic problem, because on non-speaker phone calls, talking directly into the bottom mic gives great quality. And on Speaker phone, covering the bottom mic makes the speaker phone sound really good. That's why I think there's something going on with the "Sense Sound" noise cancellation.
Is anyone else seeing the same issues? I want to be able to hold the phone normal on a non speaker phone call and get good quality.
Looking for any tips and advice anyone can give. Is it worth exchanging for a new one, as I am still in my 14 day window.
Thanks in advance for the help!

Here are some other threads that seem to be having similar issues:
http://forum.xda-developers.com/showthread.php?t=2262648
http://forum.xda-developers.com/showthread.php?t=2294532

Mic problems with all boards thread! What do we do to fix this or do we need a new boa

I have come the conclusion that this is not just a mic problem but a uni'versal line in problem since several devices can be connected thru my SoundBlaster Li've! 24-bit line in port. I'm assuming its a software problem and it seems to be a common problem. The second possibilty is that part of the board is either defected or assembled incorrectly. Either way everyone seems to have made sure that:
A. there drivers are up to date.
B. they have dissabled any other audio device in windows or in BIOS.
C. there mic won't work no matter what port they attempt.
D. creative software changes of audio devices and mixer still don't change anything.
I came on here for answers yet all i find is questions.
And all seem to be pretty similar. There are many other posts pertaining individual audio cards, yet they all have the same problem. If your having the same problem post here and keep this thread ali've, if you have an answer to your own problems you'd like to share post it here. Hoping for a Creative response to either my post or one of the many other posts on the same subject.Message Edited by syferus on 09-23-2005 0:30 AM

If you have a PCI-GPIB card, you needn't worry about the USB port or whether or not Windows ME supports 1394. All you need in NI-488.2 version 1.70 from National Instruments. Install this driver and then insert your card. Windows should detect the card and find the proper driver.
If this did not happen in the proper sequence, look in the device manager and see if the card was installed as an "other device". If this happens, remove the card in the device manager and have windows redetect it. If this is not a solution, you may consider the ask an engineer page at www.ni.com/ask. Provide as many details as possible.

Mic problem & warrenty issue .

Hiii
I have iPhone 4S which is having mic problem i guess.During voice calls the call receiver at other end unable to hear my voice on handset mode but on speaker mode he can hear my voice.
Also wanted to know in which country my phones warrenty is valid .
iPhone4S
Model: MD241LL/A
Serial No.: DNPHN0Z3DTD6

Hi Alankar,
Make sure your iPhone case is not covering the mic. It is on the bottom to the right or left of the connector. Have you tried a call without a case on the phone?
Your Model Number indicates that this is a US phone, so the warranty would be valid in the US.
Cheers,
GB

Re: Mic problems

message me back let me kno some options to fix my mic problems please skype

wityh me i dont have head phones and only use the mic that the pc always used.i have an hp 2000 laptop with windows 8.1 installed

Audigy 2 sound card problems

I am hoping that someone out there can help me in a crucial situation.
I am using an Audigy 2 sound card with creative 5. speakers.
I also use Adobe Audition to edit, record sessions for my voice-over jobs.
Recently, I attempted to hook up a web cam so that I could see my grand daughter on the west coast.
After hooking up the web cam, I noticed my home studio environment changed drastically. I began having trouble with recording using my microphone through my Macki mixer. I began hearing a continuous hiss that I had never experienced before.
In fact after uninstalling the web cam, and restarting my computer, I got that horrible blue screen on my computer indicating the world was about to end! Smile
Long story short, I was able to finally get my computer back up, but I continue to experience problems recording "clean' audio".
Three things, after reinstalling Creative from disc several times and restarting my computer I receive a window stating Creative Media Source Detector.....Unable to load needed components....Please reinstall the application"
Also, when trying to test my sound hardware I get a message stating...Direct play voice setup..."an error occurred during direct play voice setup....error code 0x80004005
Last but not least I cannot access the "Creative diagnostic feature on my computer. I only get a small window for this feature that will not open up fully and allow me to run a diagnostic test!
I know this is a lot to absorb, but I cannot get anyone from Creative to address my problems because I am out of warranty and therefore not getting any love from this company.
Need your advice and or guidance on this.
Please respond when time allows.
Vopro

Re: Audigy 2 sound card problems? use add/remove programs and remove all creative software and drivers, then do the same for your web cam and unplug it
restart your pc
download and install [url="http://downloads.guru3d.com/Guru3D---Driver-Sweeper-%28Setup%29-download-655.html" rel="nofollow">driver sweeper[/url] and use it to clean up any left over creative bits and bobs and restart your pc when it asks you to
now download and install the [url="http://support.creative.com/Products/product_list.aspx?catID=&CatName=Sound+Blaster" rel="nofollow">latest audigy drivers[/url]
once your back in to windows try recording something and see if everything's back to normal
now reinstalling your web cam but don't reinstall using the cd that came with it
find the manufacturer's website and get the latest drivers
install cd's best avoided simply because the software and drivers they contain are typically the initial release versions, and so potentially very old
and i think we can all agree that old, buggy drivers can be a real pain

Sound blaster Audigy 2 zs gamer problem!

(Sound blaster Audigy 2 zs gamer problem!? I had a recent problem recently that caused Windows not to load at all. After getting that fixed and the computer back home I have run into a sound issue. None of the Creative's Media Source programs would work properlly. When clicked on I would get the error that the program has encountered an error and needs to close. Finally un-installed all creative programs and related software and went through the re-install process. Encountered an error that program could not load because plxcore.plx cannot be found. I went through the solution listed on?Creative's web site to fix the?issue and none of fixes worked. Recently deleted everything Creative again by uninstalling all drivers and going through the installshield folder and deletd all creative related items. Went through the install process again. Had the plx error, fixed it and had sound but had the same problems with the Media SOurce as before. Went to Creative's web site through auto updater for a new driver and other essential items needed for my sound. Back to no sound again. Under Windows control panel under sounds and audio devices under volume tab, it will not even let me select the speaker setting or place the volume control on the task bar. @99.3.9.75

Brettpopp
Try updating your BIOS to the latest and have the sound card tested on another machine to see if it is still functioning.
Jason

Windows 7 - Audigy 2 ZS Mic Issues

"Windows 7 - Audigy 2 ZS Mic IssuesG Ok, i've seen so many posts on this issue but am now suffering from a headache after spending 3 hours trying everything I could find in google to fix this.
The mic works when it wants. When it does work (rarely), its garbled or lagging like crazy.
I have read, and searched this forums, but besides seeing "Doesn't work" or "Use daniel_k's drivers" i cant find any definate fix (or even links to something new that I haven't already tried).
I tried daniel ks drivers and they seems to be pretty darn good, however it still did not correct my issue.
I record music, and I play games. . . and absolutely love win7. . . but am forced to use XP (limiting my amount of memory used) when I want to do any of the above.
Any help would be greatly appreciated.

&Re: Windows 7 - Audigy 2 ZS Mic Issues? The support pack does absolutely nothing to fix the mic issues.
Does this driver improve sound quality or performance? Are there any tweaks?
No, this driver does not improve sound quality nor increase performance.
No, there are no tweaks.
If someone states that its driver improves sound quality and performance, you are being fooled, cheated.
It is even worse that the so called tweaks come from a person who is not EVEN technically acknowledged, does NOT know anything about Windows internals, software engineering and?sound?fidelity that all audiophiles always look for.
If you "feel" the sound better, that is the infamous placebo effect and there is no real proof that any tweaks work.
In fact, I have yet to see a driver that states in its release notes that it improves sound quality.
I've disassembled about every single .SYS driver, .DLL libraries and .EXE executables and found nothing.
There are some undocumented registry values, but nothing related to sound quality or performance.
Would the so called tweaks even exist, they would be in my Support Packs, you can bet that.
and
Microphone issues on Windows 7/Vista 64-bit (x64) with 4GB?of RAM or more
Audigy driver does not support 64-bit addressing, resulting in random issues with the Microphone (static, robotic or distorted voice, white noise).
Workarounds:
- install the 32-bit (x86) version of Windows
- limit the RAM available to Windows to less than 4GB
- enable Memore Hole in BIOS Setup, if?your motherboard supports the setting

Ipad 2 mic problem

1. My mic just suddenly has gone out of service. Only some scratching sound can be heard during video recording.
2. I bought my iPad 2 in NY, March of 2011 - I am currenlty in Saudi Arabia,
a. Is there any shop that can accommodate me to fix this mic problem?
b. I have got only a scanned copy of the receipt from the Apple Store in Palisades - am I still covered with a warranty using this scanned copy?

Yes, hold a finger longways over most of the nozzle (if you have one) to confine the suction to a specific area. Also, do it for a prolonged period, and gently use a common pin to loosen any foreign matter that my be in it!

I have mic problem while making video and while on loudspeaker its reduce the mic volume alot.

i have mic problem while making video and while on loudspeaker its reduce the mic volume alot. plz help me out

iPhone User Guide
http://manuals.info.apple.com/en_US/iphone_user_guide.pdf

HT201328 People can`t hear me during calls but i can hear them (probably *not* a mic problem)

I unlocked the iPhone From AT&T, its working well in browsering and i can hear people in calls, but people can`t hear me (even with earphones! it`s not a mic problem!!) help me please..

I had the same problem this morning. I tried reset on phone a few times. Nothing. Then I restored it from iTunes and it worked fine. This has happened to me before -- don't know the root of it, but restoring has worked so far. Good luck.

3GS Speaker Mic problem

I have a mic problem with 3GS 32GB running latest software v3.1.2. It works fine when making calls in standard mode, but the mic does not increase its sensitivity in speaker mode so that people can barely make out my voice. Speech is virtually inaudible speaking at it from just 30cm away. I tested it and there was no difference in mic volume between speaker and standard mode. The mic mesh is clean, and removing the phone cover made no difference, nor did restoring the iPhone or changing the SIM/carrier. I took it to the local Apple retailer and 3 other 3GS phones tested all had the same problem, but a 3G worked fine and calls were easily heard in speaker mode. Is this a problem with all 3GS phones?

I have found it myself. When Skype is running at the back plan, the app is routing sounds to ear speaker. Quitting app, solves the problem. This reply is for whom experience the same problem.

Blaster Audigy SE Mic problem in Vi

Hello everyone, I was wondering if anybody knew how to get the Microphone working in Windows Vista 32 Bit version, I have the drivers for my Audigy SE updated off this site and I hear sound but I cant use my Mic at all. If anybody has an aswer please help me out. Thanks.

<a target="top" href="http://forums.creative.com/creativelabs/view_profile?user.id=90734">[color="#000000"]tortofe0[/url] , im having the same problem, the sound is fine however my mic is really really quite, so quite that the people on teamspeak cant hear me!... i have the mic volume on high both in the mic settings and on teamspeak and im using the latest vista drivers form the creative website!

Audigy 2 ZS/ Teamspeak/ Mic Problems/ SOL

Similar Messages

Maybe you are looking for