Audigy 2 ZS to Home Theat

Hi,
I'm new here. I notice Creative have the Home Theatre Cable here: http://sg.creative.com/products/product.asp?category=&subcategory=6&product=4309
I'm wondering what type of home theatre can those cables plug in to And what's the name of that input. What do i have to look out for when buying a home theatre which can be connected to my Audidy 2 ZS?
Thank you

Just out of curiosity why exactly are you hooking your computer to a home theater. If you are planning to play movies on your pc and output the sound through your home theater I think the digital might be better. Dolby 5. and DTS are both compressed digital signals. If you use the cables you mentioned the sound card needs to take the extra step of a digital to analog conversion before sending the signal to the receiver. Using a digital connection makes this extra step unnecessary. If you plan on playing a dvd audio disc (dvd-a) on your pc then you have to use the analog setup as the digital output is disabled during dvd-a playback. As far as a home theater not having rca inputs that depends. If you are talking about an all in one setup (HTIB, home theater in a box) than it may not have rca inputs. If you are talking about separate components then even a low end surround receiver like the $30 Insignia at Best Buy would probably have the rca inputs, as well as digital. Later

Similar Messages

Connecting Soundblaster Audigy 2zs to Home Theater Amplif

Can I connect my Soundblaster Audigy 2zs directly to an amplifier and still get 5.,6.,or7. speaker setup? I feel it's kind of redundant to use a reciever when the Audigy has all the capabilities of a Home Theater Reciever. And it outputs sound at 92khz, which currently is only available on more expensi've recievers.
My goal is to use my pc as a souce and connect it directly to amps and speakers. I would like to put money I save on recievers into a high end speaker system
I have read in the previous posts that it may be possible to do 5. by getting an mini jack to RCA adapter for each channel. But no details on 6. or 7..

I am in the same situation as you. As the CL told me
http://forums.creative.com/creativelabs/board/message?board.id=soundblaster&message.id=5343 --
You can either use the audigy to decode the sound or your reciever to decode the sound with the SPDIF passthrough. Just whichever has the better specs.
From my situation I would recommend having speakers with analog hookups to the front/rear/center sub rather then the digital output. The only way to take advantage of the digital output is with a DVD and in that case you can just watch a DVD on your TV rather then your computer. For games the analog 5. hooks is better as well because with games it decodes it and with your reciever it would only have 2. sound.

Connecting the Audigy 2 to a home theater sys

I've seen a lot of posts on this subject, but have seen a number of different answers. Hopefully I can get a definiti've answer...
I have an Audigy 2 ZS card (ordered as part of a Dell E50) in my PC and want to connect it to my home theater system. The home theater system has both analog, digital coax, and digital optical inputs. I want to get the best possible sound quality coming out of the PC to play music, thus I would like to have a digital connection between the PC and receiver.
The question I have is specifically what type of connector do I need to make this digital connection. I have seen people mention using a regular mini-plug to RCA connector, but didn't really say whether that got a digital signal or not.
I've looked on the Creative web site a bit, and saw some cables, but didn't know for sure which one was the right one. Please advise specifically what kind of cable I should get for this.
Thanks.

You will have to ask the store if they have a 3.5mm minijack to RCA cable. Somewhere within the Getting Started program of the Audigy 2 ZS Sound card they have a section which shows you illustrations on how to connect your sound card to different setu
ps.
The digital connection will give you the purest stereo signal for your music, but you will not get surround sound unless you are listening to a surround sound?digital feed which the Home Cinema Recei'ver can understand (i.e. Dolby Digital, DTS, or regular PCM). This means that unelss you are listening to DVD Videos?with Dolby Digital or DTS soundtracks, you will only get stereo sound out the speakers, no multi channel EAX, no DVD Audio or CMSS either. Best thing to do is to connect the sound card to the Home theater system using Analog Mutlichannel input. Get 3 3.5mm to 2 Phono Cables. Plug each 3.5mm end into Line out ,2 and 3 on the back of the sound card. At the other end of the cable, match the 2 phono plugs?to the respecti've sockets on the home cinema amp. For example Line out is the front left and right speaker so just match white with Front Left and red with Front Right. Line out 2 - white goes to Rear/Surround Left and Red goes to Rear/Surround Right, irrespecti've of the colour coding on your amp.
Line out 3 - white goes to Center, red goes to Subwoofer, irrespecti've of the colour?coding again?- am not too sure on this one so be ready to reverse the connections if the speaker test comes out wrong or the "Front Center" voice booms out of your subwoofer!?By connecting it through multi channel analog input, the sound card will do all the decoding, so you can enjoy CMSS, EAX, Neo:6 and any other multi channel pleasure that the Sound Card provides in all its glory. The digital connection will provide purer sound but NOT surround sound unless you invoke a multi channel source such as a Dolby Digital or DTS?DVD, this is of course assuming you have set up the DVD software to correctly channel the sound to the SPDIF out and then set the sound card to passthrough SPDIF signals through digital out!?Good luck and hope that hel
ps.

SB Home Theater Cable vs. Audigy 2 Platinum Ex incompatib

Hi all,?I need to connect my good ol' Audigy 2 Platinum Ex to a 6. speaker setup. I noticed that Creative has the Home Theater Cable, but the cable seems to be for a 7.-able sound card, not a 6. (see link)http://www.creative.com/products/pro...duct=4309&nav=. Is this true that the cables we can buy from Creative are only for the newer 7. cards? If so, where could I get/what kind of cables will I need for the Audigy 2 Platinum Ex to a 6. speaker setup?Thanks!Message Edited by bizsar on 07-09-20072:56 PM

leif99 wrote:
I tried to paste the picture on the front page of this manual. Here you can see that the card does in fact not have the connection you circeled red. I have also seen the sketch with this aux connection. The drawing is wrong. The card does not have the aux 4 pin connection. It seems like this type of card has been supplied as a "clean" version with no aux input, and a version as you describe. The manual following my card includes a sketch where the aux is not shown. I am quite puzzeled. Is there any other way of solving this? I am reluctant to by a new sound card.
If there are no 4-pin input connectors onboard, then you need to use one of the line-ins on I/O Console. You mentioned that the sound becomes distorted when connected through line-in (which one have you tried?)
--> can you control the output level from VCR ?
--> have you tried to set input level in Surround Mixer (Wave and Line-In sliders, .rec (AnalogMix(), Line-In n when recording))?
--> have you tried usie Line-in 3 (Aux-In, back of the I/O Console) or Line-In 2 instead of Line-In which is a 'FlexiJack' type jack connector (holds both, mic-in/line-in sources)?
jutapaMessage Edited by jutapa on 08-2-2006 0:22 AM

Home Theater receiver users should read this for enabling dolby digi

I have an onkyo 5. dts / dolby digital receiver, and an audigy 2 zs platinum. i am using an optical cable from the front panel on the audigy to the optical in on my receiver. My receiver manual says it is a 96 khz receiver. I am using a 2 pin cable from my dvd player to the audigy. When using a dvd, I can not get dolby digital sound to my receiver. I have set the audigy to spdif pass through, i have tried 48khz, 96khz, every combination of everything. Setting to 2. speakers, 5. speakers, but yet i am stuck with either stereo sound if set to 96khz, or dolby prologic II if set to 48khz.
Another thing i tried was using a dvd image i created on my hard dri've from a dvd, and playing it through alcohol 20%, to see if it was my dvd player giving the problems. I still get the exact same results when playing a dolby digital source through the hard dri've.
So, in the end, is it actually possible to have dolby digital from the audigy 2 zs platinum through a home theater receiver, or not?
thanksMessage Edited by jonnybruno on 0-20-2005 2:7 AM

I am feeling the same way about this card. It would be nice if somebody from creative could respond with a definite correct way to get dolby digital to my home theater receiver. Im sick of being plagued with problems.. no dolby digital, random stopping of sound which requires me to reinstall drivers, popping noises every so often, etc etc etc..
seriuosly... an m-audio revolution is starting to sound pretty appealing.
edit: I would also like to note that my box does say front panel optical out for 5. support, unlike the previous poster had said it says stereo only. I am able to get dolby digital if i switch to my onboard nforce soundstorm or whatever it is.
PS. I am not going to let this thread drop down until I have a definiti've answer on whether it is possible to have dolby digital through my audigy 2 zs platinum and home theater receiver. I paid $200 for this card, and I really would appreciate a straight forward definite answer.Message Edited by jonnybruno on 0-9-2005 09:4 AM

Home Theater need. Multiple Audio Streams from 1 card or possible to use 2 car

I currently have 2 SB Li've's installed and a SB Audigy in the box.
I would like to be able to send different audio out to different devices. I need to send audio from a game interface called MAME 32 to a speaker system connected to the PC. I also use this PC as a home theater PC and want to send audio from my DVD playing software out to my TV(in analog stereo mode) and/or to my receiver(in Dolby Digital mode using the digital connector).
I would like to be able to run these seperatly without having to go into the Control Panel and switch the default sound card like I am doing now. I do not need to run them at the same time.

Bummer. Are you guys working on something that might have this capability? Seems to me that the closer we integrate PC's into our entertainment systems the more need we will have for the ability to do multiple audio streams, i.e. MP3's to the living room. DVD movie audio to the family room, XM radio classical station to the kitchen for mom etc..
Intel is offering this as an onboard solution that has the ability to do at least 2 different streams.
http://www.intel.com/design/chipsets/hdaudio.htmMessage Edited by relay on 0-26-2004 05:02 PM

Intermittent sound using dd live pack, spdif to home theater spdif.

. when using dd li've pack to listen to audio through home theater, connecting spdif out on elite pro module to spdif in, i have only intermittent sound. there is no common timing, just sound on and off. as the sound comes on, on my computer i have the dolby digital li've bitstream out "bug" that comes on in the lower left hand corner of my screen, then goes away when sound off. i am listening in entertainment mode. i don't really know what else to say. does anyone else have this [email protected]

G? A lot of Audigy DDL users have reported 5. signal being lost randomly.
Mine cuts out and Dolby Digital Li've becomes plain PCM (stereo on the receiver). It only does it for a second, then 5. gets restored. Then a few seconds/minutes/hours later it happens again.
Sounds somewhat related to the X-Fi issues.... perhaps is the same thing?
heavyd wrote:
when using dd li've pack to listen to audio through home theater, connecting spdif out on elite pro module to spdif in, i have only intermittent sound. there is no common timing, just sound on and off. as the sound comes on, on my computer i have the dolby digital li've bitstream out "bug" that comes on in the lower left hand corner of my screen, then goes away when sound off. i am listening in entertainment mode. i don't really know what else to say. does anyone else have this problem?

Desktop/Finder keeps rebooting after upgraded to Maverick (mac mini hooked up to a home theater system)

My desktop keeps rebooting ever since I upgraded to Mavericks.
Current setup, Mac Mini hooked up to home theater (Panasonic SC-HTB20) that is then hooked up to my Panasonic Plasma TV.
I usually leave my Mac Mini on running and at least once a day when I turn on the TV I can see that my desktop was rebooted. Firefox and Chrome will say that it wasn't shut down properly and if I want to restore my previous session. Also some times when I switched the input to watch TV and switch back, all my windows will be scattered out of place. For example Chrome will be in the top left hand corner to the point that it's almost minimized and I wouldn't be able to move it as well. Only thing I can do is close out these applications and relaunch them. It doesn't appear that the OS actually crashed, but more like the desktop/finder itself crashed. Cause once in a while I will switch back or turn on the TV and the screen will stay black for a few minutes then I'll see the cursor in the top right hand corner. After that I will start to see the desktop and my application start loading. It doesn't go through the regular process of rebooting where you see the Apple logo so I don't think the OS actually crashed but I could be wrong.
For some reason it seems like Maverick doesn't like the home theater system. An almost guarantee way to reproduce the issue is to wait for the home theater to turn off after it's been inactive for a while. If I turn it on the home theater to have the audio coming from it I will see the desktop goes black immediately then the whole desktop reboot process I mentioned above will kick in.
Never had any of these issues on 10.7 before I upgraded to Maverick.
Anybody have any suggestion? I really don't want to format and downgrade back to 10.7.
Thanks

Sounds like a kernel panic.
If you post the report we could have a go at deciphering it.
It would be in /Library/Logs/Diagnostic Reports.

How to Connect My Apple TV to My Panasonic SC-PT760 Home Theater

Hello;
I currently use the Panasonic SC-PT760 as the Home Theater DVD Player which only has 1 HMDI output and connects directly to the HD TV, also I have the Direct TV connected to the Home Theather via AUX.
I am wondering how should I connect my apple TV, if I would like to connect ut via HMDI. Is a HMDI switch an option or what should I do ?
Please advise.

You can purchase HDMI switches but don't expect them to work perfectly in _every_ configuration. What I mean is that your mileage may vary, it may work, or it may not. However, chances are good that it will but I'd make certain that you can return the HDMI switch if it doesn't work correctly when paired with you DVD player and the Apple TV and your HDTV.
By the way, does your TV have component inputs? If so you can use the Apple TV's component outputs to get HD but then you'll have to route the audio from the Apple TV either over standard RCA stereo plugs or via the digital audio optical connection on the Apple TV (assuming again that your HDTV has optical audio inputs, but I see that you receiver has an optical input so that should work too).

How to connect a apple tv to a panasonic sa-pt860 home theater sound system?

how do i connect my apple tv to a panasonic sa-pt860 home theater sound system? Having no luck, what leads do I need please?

Welcome to the Apple Community.
Does it have HDMI inputs and outputs.

How to connect Apple TV to projector and home theater system?

I have an Optoma HD20 projector that I have a long hdmi cable connected to and plugged that into my Apple TV. I also have an older home theater system that does not have an optical audio input. So I bought an adapter to go from optical audio to RCA cables. When I get it all plugged in and turned on I can't even get the video on my screen. What am I missing?
This is the adapter...
http://www.amazon.com/gp/aw/d/B005F20756

Darn. Ok. Then do you have any suggestions for other options to connect the two? My projector is mounted to the middle of the ceiling with a whole for the wires that go along inside the ceiling to the other side of the room.

IMAC =HDTV&HOME THEATER

How can i connect my IMAC to both HDTV(LG) and LG surround system (home theater) and get everything to work as one i.e IMAC to work on both TV & SURROUND SYSTEM. I got HDMI cables . I will appreciate your help.

I don't think it work work for HD, at 800 MHz G4. Not enough graphics or CPU processing power to display HD at full screen without a lot of dropped frames.
Also, there is no way to connect a digital display over HDMI. You may be able to get acceptable standard def results with connecting it over VGA or other analog connection, but I believe an iMac G4 only mirrors the built-in display. So it may be stuck at 1024x768 as the max resolution. A typical HDTV's native resolution is 1920x1080.
You should test the output from the mini-VGA port using a regular multi-sync CRT display, if you happen to have one collecting dust or know someone that has one. See what resolutions you can achieve. You won't get any better if you connect it to an HDTV.

How to connect mid 2012 MacBook Pro to home theater system

Okay so I'm looking at purchasing a home theater system and was wanting to know the best way to connect my mid 2012 MacBook Pro to the home theater system and TV. I am wanting to play both movies (Netflix etc) and music. Will my MacBook play 5.1 surround sound to the home theater system? Whats the best way to connect this all up? MacBook audio to the home theater system via Digital Optical from the headphone port with a 3.5mm to toslink adapter and then video to the TV via HDMI cable from the thunderbolt port with thunderbolt to HDMI adapter? My thinking was to separate the video and audio to get the best picture and sound. Any help/advice on this would be greatly appreciated.

Will my MacBook play 5.1 surround sound to the home theater system?
Yes.
Whats the best way to connect this all up?
An AppleTV or any AirPlay-enabled AVR. AirPlay is wireless, though you could use wired Ethernet if you want to avoid all the potential problems associated with wireless. Make sure it specifically says AirPlay which is Apple's proprietary technology. There are quite a few of them to choose from today. Denon is one, I believe Pioneer, there may be others. Shop around. The AppleTV's price was recently reduced to $69 US and may actually be the most cost-effective solution, allowing you to research the best AVR for your needs. The AppleTV has both HDMI (audio and video) and optical audio outputs.
MacBook audio to the home theater system via Digital Optical from the headphone port with a 3.5mm to toslink adapter and then video to the TV via HDMI cable from the thunderbolt port with thunderbolt to HDMI adapter?
Way too complicated But if you really don't want to use AirPlay, you can purchase an inexpensive (< $10) Thunderbolt to HDMI adapter and an equally inexpensive (<$3) HDMI cable to any HDMI input on your AVR.
My thinking was to separate the video and audio to get the best picture and sound.
It makes absolutely no difference. HDMI and optical audio use completely identical digital audio signals.

Help on purchasing a Home Theater System...

Hi everyone,
I just bought a new HDTV and I am now looking into getting a good Home Theater System, since as I'm sure you all know, the speakers on my TV are pretty pathetic.
But in all honestly, I really don't know much at all about speakers and home theater systems, so that's why I'm here.
I hear that most home theater systems come with DVD and Bluray players, but I don't need either of those, since my ps3 and 360 give me 2 DVD players and a Bluray player already.
I am really looking to spend less than 400 bucks, or around that area if possible.
I also have one question: My HDTV only has 2 HDMI ports and one Component port and since I am using both of those (HDMI is being used for the cable and ps3 and component is used for my 360) I am wondering if there is some other way of connecting the Home Theater System?
Thanks in advance for all your help.
Solved!
Go to Solution.

paulmohr wrote:
Ok after looking at the manual for that reciever this is what I come up with.
One HDMI cable running from your PS3 to the reciever (BD in would be my choice)
One HDMI cable running from your Cable box to the receiver (dvd in would by my choice)
Now for you Xbox 360 you said you have the component cables for it, from what I can tell you can also get an HDMI connector as well. What you choose is up to you but this is how it would work.
Xbox with component cables:
Since the receiver doesn't have component swtiching you would have to hook the xbox up to your tv with the component cables ( the way it is now).
Then run an optical audio cable from the xbox to the receiver SAT optical in.
If you get the HDMI cable most likely you would just run the HDMI cable from the Xbox to the receiver like the other components. If you went this route I would hook the xbox to the dvd hdmi in and the cable box to the SAT hdmi in though. Honestly it doesn't matter but it just might be less confusing that way.
Then you would need on optical cable running from the TV out to the TV in on the reciever. If you never watch regular tv you don't need this since the sound will come from your cable box anyway. But if you also have the tv hooked up to an antenna or something this will send the sound to the receiver.
And one HDMI cable running from the Receiver out to on the HDMI inputs on the tv. This is what will carry all of the signals going into your receiver to your tv.
And then the speakers connections which should be described in the instructions for the receiver. Just make sure the polarity is right when you connect them.
This configuration will let you control most or all of the components through the receiver since it switches most of them. Just choose the correct input and the tv will display it.
Okay, so according to that, I would need 4 HDMI cables to my HDTV, which would be impossible.... Unfortunately, my new HDTV only has 2 HDMI porsts, so is there a way to get around that issue? If I use HDMI for the ps3 and HD cable box, then is there a way to hook everything else up (including the reciever) without HDMI?
Thanks in advance.

Dolby DIGItal HOME THEATER cannot be installed after upgrading to Windows 8.1

Hi there,
today i was forced by microsoft to upgrade from windows 8 to windows 8.1 I have problem with installing Dolby Digitial Theater Home app. I unistalled previous conexant drivers (windows 8) and installed new conexant (for windows8.1). I removed dolby. Then i went to C/Drivers/WIN/Audio/DolbyGUI/ there is setup.exe, dolbydigitalplusAA.msi and dolbydigitalplusHT.msi. THe setup.exe doesnt start installation, plusHT(home theater) gives message saying - cannot installed due to an error. However I can install dolby digital advanced audio, but I want my Home Theater back!!!! Can you please help me resolve this matter.... thank you
I have lenovo edge E531 with 8gb ram, intel core i5-3230M 2.6GHz, GeForce 740M

hi sotim01,
Thanks for posting!
1. Uninstall all components,
Open Device Manager and Uninstall your Conexant audio under Sound and ganing controllers (make sure to place a check under delete driver software for this device)
2. Open Control Panel Uninstall a program and highlight the dolby component and an Uninstall button will appear.
3. Open your C: drive and Delete any folder that says drivers if non then continue with the next step
4. Download this Driver for installation
Conexant Audio Driver
Install it and continue
5. Open Drive C: now and you should have the Drivers folder back.
Open that, Open Connexant Open Dolby Gui, then you should have Dolbyaa for Advanced audio.
Restart your PC and there you go!
Let me know your findings
Cheers!
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Audigy 2 ZS to Home Theat

Similar Messages

Maybe you are looking for