Audigy 2 ZS - Toshiba SD-63HK Sound problems in XP and Vi

Right here we go,
I have connected and av amp to the Audigy via the SPDIF using a Coax cable and a Mono Jack to Phono converter from Maplin (product number RW04E).
Yesterday I tried it in Vista and got these results
Windows sound test - Worked fine
Cyberlink DVD player playing Matrix Revolutions - Worked fine. DTS lit up on the amp
Windows Media player playing my own WMA lossless files - was close to inaudible (too quiet even when all windows volumes were maxed out)
Gameplay F.E.A.R which does not run DD or DTS - again quiet like the media player
Today I plugged in my XP HDD and got these results
Creative Speaker test - listed below
Front left speaker test - The audio came out of the middle Speaker?
Middle Speaker Test - No Audio from any speaker
Front Right speaker Test - The audio came out of the right speaker
Rear Right and Rear Left Test - No audio heard from either
Windows sounds - Does work but only out of the middle and front speaker
Cyberlink DVD - funny result Audio only from Middle and Right but background sounds played at normal volume i.e music SFX but dialogue was inaudible. Also the DTS did not come on the amp where it did on Vista
Media player - normal volume but only middle and right speaker
So can anyone help with these problems?

I have same problem. Did you find a fix?

Similar Messages

Sound problems with CNBC and E4 with TV @nywhere Master

Got the TV @nywhere Master card, had no problems with tuning in the cable stations picked up all the channels, but E4 and CNBC have no sound just a anoying clicking sound. Have updated the drivers and software, tried the card with Windows 2000 SP4, and XP pro SP1, tried both internal & external audio connections, nothing makes a difference. Anyone got any idea's?

I bought and installed a TV@nywhere Master yesterday (18June03) and no sound problems at all. The Radio volume control definitely controls the line in volume, but check that the mixer Volume Control is not being muted. My Sound in via on-board sound 6 channel Realtek ACL650.
I have been generally very pleased with the results but have yet to get the remote to do anything, I have WinXP SP1 with all updates installed. Not sure if it is my System set-up or faulty remote but it a minor concern for me.
I would suggest that you take a look at VirtualVCR (freeware) for your capturing if you want more that Mpeg files. It works very well for me and allows me to capture using the frame size and codec of my choosing

Sound problems - MSI Motherboard and drivers

message:-
I have an Evesham Microcomputer and am having difficulty with the sound - distorted and sometimes slow. I decided to use Live update to ensure I have the most upto date drivers for the sound card and chip set, both VIA.
Unfortunately I am having a trouble down loading these update and installing. All I get after a few minutes of the download screen is error code 997. Any ideas about the down load or sound problem? System info below.
regards
Nick
Motherboard MS-6340 ATX
VIA KT133A (VT8363A 552BGA & VT82C686B 352 BGA)
Audio Direct Sound AC97 Audio
Live update version 3.55
Chip set 4.37
Audio set version 6.14.1.3880
****************System Information****************
Motherboard MS-6340 ATX
VIA KT133A (VT8363A 552BGA & VT82C686B 352 BGA)
Audio Direct Sound AC97 Audio
Live update version 3.55
Chip set 4.37
Audio set version 6.14.1.3880
[MSI_Info]
OS Version: WinXP
LUS Version: 3.55.000
Language: 2057
MB Model Name: MS-6340
MB BIOS Vendor: Award
MB BIOS Version: 6.10
[OS]
Name: Microsoft Windows XP Home Edition|C:\WINDOWS|\Device\Harddisk0\Partition1
Manufacturer: Microsoft Corporation
Version: 5.1.2600
CSD Version: Service Pack 2
Windows Directory: C:\WINDOWS
Boot Device: \Device\HarddiskVolume1
Total Virtual Memory: 2048 MB
Free Virtual Memory: 2009 MB
Total Visible Memory: 256 MB
Free Physical Memory: 47 MB
Serial Number: 55277-OEM-0041603-32617
Install Date: 09/16/2005
Current Time Zone: Paris , Belgrade , West Central Africa
Locale: 0809
State: OK
[System]
User Name: NICHOLAS-STUDY
Description: AT/AT COMPATIBLE
Model: MS-6340
Manufacturer: MICRO-STAR INTERNATIONAL CO., LTD
Number Of Processors: 1
Total Physical Memory: 256 MB
System Type: X86-based PC
System Wake Up Type: LAN Remote
Power Supply State: 2
Power Manage. Support: null
Bootup State: Normal boot
[BIOS]
Name: Award Modular BIOS v6.00PG
Manufacturer: Award Software International, Inc.
Version: VIA694 - 42302e31
Serial Number:
Release Date: 12/18/2001
Target Operat System: Unknown
Language: n|US|iso8859-1
State: OK
[CPU]
Name: AMD Duron(tm) processor
Description: x86 Family 6 Model 7 Stepping 1
Manufacturer: AuthenticAMD
Processor Type: Central Processor
Version: Model 7, Stepping 1
Data Width: 32 Bits
Socket Designation: Slot A
Processor Id: 0383FBFF00000671
Processor Family: Power PC 604
Processor Stepping: 1
Max Clock Speed: 1202 MHz
Current Clock Speed: 1202 MHz
Current Voltage: 3.3 V
External Clock: 100 MHz
L2 Cache Size: 64 Kb
Availability: Running/Full Power
Power Manage. Support: false
State: OK
[Memory]
Name: Physical Memory
Memory Device Locator: BANK_0
Memory Bank Label: Bank0/1
Memory Capacity: 128 MB
Memory Total Width: null Bits
Memory Data Width: null Bits
Memory Type: Unknown
Name: Physical Memory
Memory Device Locator: BANK_1
Memory Bank Label: Bank2/3
Memory Capacity: 128 MB
Memory Total Width: null Bits
Memory Data Width: null Bits
Memory Type: Unknown
[Mainboard]
Name: Base Board
Manufacturer: MICRO-STAR INTERNATIONAL CO., LTD
Product Name: MS-6340(VT8363)
Version:
Serial Number:
[Sound Device]
Name: VIA AC'97 Audio Controller (WDM)
Manufacturer: VIA Technologies, Inc.
Product Name: VIA AC'97 Audio Controller (WDM)
Availability: undefined
Power Manage. Support: false
State: OK
[Network Adapter]
Name: RAS Async Adapter
Manufacturer: null
Product Name: RAS Async Adapter
Availability: Running/Full Power
Power Manage. Support: false
State: null
Name: WAN Miniport (L2TP)
Manufacturer: Microsoft
Product Name: WAN Miniport (L2TP)
Availability: Running/Full Power
Power Manage. Support: false
State: null
Name: WAN Miniport (PPTP)
Manufacturer: Microsoft
Product Name: WAN Miniport (PPTP)
Availability: Running/Full Power
Power Manage. Support: false
State: null
Name: WAN Miniport (PPPOE)
Manufacturer: Microsoft
Product Name: WAN Miniport (PPPOE)
Availability: Running/Full Power
Power Manage. Support: false
State: null
Name: Direct Parallel
Manufacturer: Microsoft
Product Name: Direct Parallel
Availability: Running/Full Power
Power Manage. Support: false
State: null
Name: WAN Miniport (IP)
Manufacturer: Microsoft
Product Name: WAN Miniport (IP)
Availability: Running/Full Power
Power Manage. Support: false
State: null
Name: WAN Miniport (IP)
Manufacturer: Microsoft
Product Name: WAN Miniport (IP)
Availability: Running/Full Power
Power Manage. Support: false
State: null
Name: Packet Scheduler Miniport
Manufacturer: Microsoft
Product Name: Packet Scheduler Miniport
Availability: Running/Full Power
Power Manage. Support: false
State: null
Name: BT Voyager 105 ADSL Modem
Manufacturer: BT
Product Name: BT Voyager 105 ADSL Modem
Availability: Running/Full Power
Power Manage. Support: false
State: null
[Video Controller]
Name: RADEON 7500
Current Refresh Rate: 75 Hz
Installed Drivers: ati2dvag.dll
Driver Version: 6.13.3276
Inf File name: oem1.inf
Availability: Running/Full Power
Monochrome: false
State: OK
[Video Configuration]
CheckBtn=ON

Well it looks like your board is an OEM board, which MSI doesn't officially support. But these drivers should work.
Chipset Drivers
Audio Drivers
Good Luck
Jeremy

TOSHIBA LEPTOP L100 SOUND PROBLEM

i have toshiba satellite L 100 system laptop my sound driver is not working to fix problem is there free driver to downlod.....

Drivers can be found here.
http://support.toshiba.com/drivers
They can help you more over here.
http://support.toshiba.com/support/family?fname=Satellite
http://answers.microsoft.com/en-us/windows/forum/hardware?sort=lastreplydate&dir=desc&tab=Threads&status=&mod=&modAge=&advFil=&postedAfter=&postedBefore=&threadType=All&tm=1421021196904
Regards, Dave Patrick ....
Microsoft Certified Professional
Microsoft MVP [Windows]
Disclaimer: This posting is provided "AS IS" with no warranties or guarantees , and confers no rights.

Audigy 2ZS How to output same sound quality on rear and fro

Hello,
i am having following problem: I have the audigy 2 zs and a teufel concept e 5. surround system.
i use bpm studio to mix music. in this program i can assign the two players/turntables to the different output channel, so i am able to have seperate channels for output with only one soundcard (left player front output, right player rear output.
the thing is, that to me it seems that the sound quality is different between front and rear. this also occurs when i output something with winamp, it sounds different in the front and in the rear. how is it possbile to achieve the same quality output with the same frequencies and the same volume level on both front and rear. i hope that the question is understandable.
thanks in advance,
mirza hujdur

I've experienced this before. I have read about it somewhere, but I can't remember the exact details and now I forgot where I saw it :angry:. I think that it is the amps in your speaker system and it has something to do with the front amps needing to be more robust than the rear. So the rear speakers sound slightly clearer. Is that what you are experiencing? You can check whether it is the soundcard by swapping the front/rear channels around. If it is the speakers, the difference in quality will remain unchanged.
Message Edited by pjc on 02-25-2005 08:48 PM

No TV sound - Problem with Pulseaudio and Gnome

Hi Community!
Since January 2013 I got big problems with the sound of my tvcard. The card is a Sundtek Media TV Pro. But after all the problems have nothing to to with the card itself!
So far I found out, that the problem is with Pulseaudio.
- Sound works under Windows on same PC.
- Sound don't work under Arch - not with tvtime, not with vlc, etc.
- Problem occurs even on a new installed system with the Arch-2013-02-01 install medium.
cat /etc/mediasrv.log
[1033] Pulseaudio connect reported an error (6 - Connection refused)
[1033] select error() in audio processor (can be caused because of pulseaudio) (Interrupted system call)
After setting up a new Arch installation with just xorg-server, gnome, tvtime and the sundtek driver from AUR I run journalctl -b:
Feb 10 16:25:15 hightower pulseaudio[636]: [pulseaudio] pid.c:
Daemon already running.
With sudo journalctl | grep 'Feb 10 16:2' I get the following output:
Feb 10 16:25:01 hightower rtkit-daemon[489]: Successfully made thread 488 of process 488 (/usr/bin/pulseaudio) owned by '120' high priority at nice level -11.
Feb 10 16:25:14 hightower rtkit-daemon[489]: Successfully made thread 606 of process 606 (/usr/bin/pulseaudio) owned by '1000' high priority at nice level -11.
Feb 10 16:25:15 hightower rtkit-daemon[489]: Successfully made thread 636 of process 636 (/usr/bin/pulseaudio) owned by '1000' high priority at nice level -11.
Feb 10 16:25:15 hightower pulseaudio[636]: [pulseaudio] pid.c: Daemon already running.
Feb 10 16:28:55 hightower pulseaudio[1000]: [pulseaudio] module-jackdbus-detect.c: Unable to contact D-Bus session bus: org.freedesktop.DBus.Error.NotSupported: Unable to autolaunch a dbus-daemon without a $DISPLAY for X11
Feb 10 16:28:55 hightower pulseaudio[1000]: [pulseaudio] module.c: Failed to load module "module-jackdbus-detect" (argument:""): initialization failed.
Feb 10 16:28:55 hightower pulseaudio[1000]: [pulseaudio] socket-server.c: bind(): Die Adresse wird bereits verwendet
Feb 10 16:28:55 hightower pulseaudio[1000]: [pulseaudio] module.c: Failed to load module "module-esound-protocol-unix" (argument: ""): initialization failed.
Feb 10 16:28:55 hightower pulseaudio[1000]: [pulseaudio] main.c: Module load failed.
Feb 10 16:28:55 hightower pulseaudio[1000]: [pulseaudio] main.c: Module load failed.
Feb 10 16:28:55 hightower pulseaudio[1000]: [pulseaudio] main.c: Konnte Daemon nicht initialisieren.
Feb 10 16:28:55 hightower pulseaudio[997]: [pulseaudio] main.c: Start des Daemons fehlgeschlagen.
So, if I understand right, pulseaudio is alreade started by the rtkit-daemon and gnome couldn't start it again.
At https://bugs.archlinux.org/task/30926 I found a hint concerning /etc/xdg/autostart/pulseaudio.desktop and /etc/xdg/autostart/pulseaudio-kde.desktop.
After removing them from /etc/xdg/autostart and running journalctl -b there are no more errors.
With sudo journalctl | grep 'pulseaudio' I get:
sudo journalctl | grep 'Feb 10 17:4' | grep 'pulse*'
Feb 10 17:41:42 hightower rtkit-daemon[485]: Successfully made thread 484 of process 484 (/usr/bin/pulseaudio) owned by '120' high priority at nice level -11.
Feb 10 17:41:55 hightower rtkit-daemon[485]: Successfully made thread 625 of process 625 (/usr/bin/pulseaudio) owned by '1000' high priority at nice level -11.
In my opinion all looks ok! I also checked the channels with the alsamixer and it looks good, too.
So I ran vlc v4l2://:dev=/dev/video0:width=720:height=576:tuner-frequency=510750:adev=/dev/null:standard=255 - but still no sound.
With cat /var/log/mediasrv.log I checked the drivers logfile:
2013-02-10 17:48:55 [343] SETTING DVB-C
2013-02-10 17:48:55 [343] switching to analog TV
2013-02-10 17:48:56 [343] SETTING PAL/SECAM
2013-02-10 17:48:58 [343] invalid audio input selected: 2
2013-02-10 17:48:58 [343] Setting frequency: 510750000
2013-02-10 17:48:58 [343] Using settings for Europe
2013-02-10 17:48:58 [343] Set Pixelformat: 0 YUV 4:2:2 (YUYV)
2013-02-10 17:48:58 [1033] Starting audio processor (PID 1033)
2013-02-10 17:48:58 [1033] initializing audio in audio processor
2013-02-10 17:48:58 [1033] loaded local pulseaudio driver
2013-02-10 17:48:58 [1033] select error() in audio processor (can be caused because of pulseaudio) (Interrupted system call)
2013-02-10 17:48:59 [1033] Pulseaudio connect reported an error (6 - Connection refused)
2013-02-10 17:48:59 [1033] select error() in audio processor (can be caused because of pulseaudio) (Interrupted system call)
2013-02-10 17:48:59 [1033] Pulseaudio connect reported an error (6 - Connection refused)
I started tvtime again. This time I ran rm -rf ~/.config/pulse/ and killall pulseaudio to kill the Pulseaudio server. I instantly got a loud noise out of my speakers.
I closed tvtime and re-opened it. And there it was: TV SOUND OUT OF MY SPEAKERS!
But now, when I run pavucontrol I get:
Connection to PulseAudio failed. Automatic retry in 5s.
In this cas this is likely because PULSE_SERVER in the Environment/X11 root Windows Properties or default-server in client.conf is misconfigured.
This situation can also arrise when PulseAudio crashed and left stale details in the X11 Root Windows.
If this is the case, then PuseAudio should autospawn again, or if this is not configured you sould run start-pulseaudio-x11 manually.
I got the information from Sundtek, that Pulseaudio should not be started as system service. Instead, every user should have an own Pulseaudio daemon and that PA was concepted this way. But they don't know how it is implemented in ArchLinux.
I also don't know it exactly. So the question to all you ArchLinu pro's:
How is PA implemented in Arch? And how can I sustainable solve my problem?
Thank you for your time and help!
Durag

There is just one more thing I found out.
After logging into Gnome and running ps aux | grep pulse I get:
rebel 727 0.7 0.2 444316 10288 ? S<l 03:02 0:00 /usr/bin/pulseaudio --start --log-target=syslog
rebel 731 0.0 0.0 71236 2652 ? S 03:02 0:00 /usr/lib/pulse/gconf-helper
rebel 843 0.0 0.0 17396 1184 pts/0 D+ 03:03 0:00 grep pulse
To get the sound to work I run:
rm -rf .config/pulse/
killall pulseaudio
killall -9 pulseaudio
I again run ps aux | grep pulse
rebel 4016 4.2 0.2 510124 11528 ? Sl 03:06 0:02 /usr/bin/pulseaudio --start --log-target=syslog
rebel 4020 0.0 0.0 71368 2700 ? S 03:06 0:00 /usr/lib/pulse/gconf-helper
rebel 4046 0.0 0.0 19456 1216 pts/0 R+ 03:07 0:00 grep pulse
I can recognize that the STATs have changed. Maybe this can help to solve the problem?

Sound problems with KDE4 and intel mobo

Hi
I just installed Arch DAEMONS=(!syslog-ng network bash-4.0# uname -a
Linux myhost 2.6.30-ARCH bash-4.0# lsmod
Module nls_cp437 5444 2 vfat 11108 2 fat ipv6 277972 16 i915 183016 2 drm 154656 i2c_algo_bit video output ext3 134380 1 jbd mbcache usblp 12996 0 usb_storage 51456 1 snd_seq_dummy 2696 0 snd_hda_codec_realtek 206504 1 snd_seq_oss 31168 0 snd_seq_midi_event snd_seq snd_seq_device snd_pcm_oss 40352 0 psmouse 59644 0 i2c_i801 9656 0 snd_hda_intel 26664 3 snd_hda_codec snd_mixer_oss ppdev 7656 0 parport_serial 6372 0 uhci_hcd 23540 0 ehci_hcd 35664 0 intel_agp 27484 1 agpgart i2c_core heci 57516 0 snd_hwdep snd_pcm snd_timer snd parport_pc parport usbcore 150192 iTCO_wdt 10952 0 iTCO_vendor_support 3080 1 iTCO_wdt e1000e 121588 0 serio_raw 5704 0 evdev 10176 8 pcspkr 2372 0 sg 27928 0 fan 4392 0 thermal 13888 0 soundcore 6848 1 snd snd_page_alloc processor 35800 0 button 5556 0 battery 10984 0 ac 4360 0 rtc_cmos 11212 0 rtc_core 18048 1 rtc_cmos rtc_lib 2500 1 rtc_core reiserfs 241896 2 sr_mod 16612 0 sd_mod 27328 8 cdrom 36032 1 sr_mod pata_acpi 4228 0 ata_generic 4680 0 ata_piix 23080 5 pata_marvell 3524 0 libata 168012 scsi_mod 110708 Please tell me what else with kdemod4.3.2. I tried to playback an audio file in Amarok but it keeps telling my that all sound systems HDA-intel ALC888, JACK and ESD do not work. Other apps are also silent. I have enabled the ESD daemon as shown below. Since Im a relative newb and ignorant of the KDE4 sound architecture, I dont know the appropriate diagnostics or logs, but I included these:
!netfs !crond @dbus @mysqld esd hal kdm)
#1 SMP PREEMPT Fri Jul 31 18:10:38 UTC 2009 i686 Intel(R) Core(TM)2 Duo CPU E6750 @ 2.66GHz GenuineIntel GNU/Linux
Size Used by

51812 1 vfat

3 i915
5864 1 i915
19832 1 i915
2884 1 video

48504 1 ext3
7080 1 ext3

7012 1 snd_seq_oss
53744 5 snd_seq_dummy,snd_seq_oss,snd_seq_midi_event
6768 3 snd_seq_dummy,snd_seq_oss,snd_seq

71716 2 snd_hda_codec_realtek,snd_hda_intel
17540 1 snd_pcm_oss

32756 3 drm,intel_agp
22776 4 i915,drm,i2c_algo_bit,i2c_i801

7656 1 snd_hda_codec
73672 4 snd_pcm_oss,snd_hda_intel,snd_hda_codec
21100 3 snd_seq,snd_pcm
58436 15 snd_hda_codec_realtek,snd_seq_oss,snd_seq,snd_seq_device,snd_pcm_oss,snd_hda_intel,snd_hda_codec,snd_mixer_oss,snd_hwdep,snd_pcm,snd_timer
36964 1 parport_serial
34380 2 ppdev,parport_pc
5 usblp,usb_storage,uhci_hcd,ehci_hcd

8876 2 snd_hda_intel,snd_pcm

4 pata_acpi,ata_generic,ata_piix,pata_marvell
5 usb_storage,sg,sr_mod,sd_mod,libata
to include here.

Online videos have working sound. It is the desktop apps which are silent. Please tell me further ways to diagnose the problem.
[Off-topic rant] My last install was an year ago and went like a dream. This time I had issues with networking, pacman, xorg and sound. Kdm refuses to log me every even attempt, to which I still have to find a solution. KDEmod4 has a lot of app crashes. Opera is as stable as alpha

Sound problem with java and windows (volume)

Hello,
Just wondering if there is any way that java can manipulate the sound volume
in windows...I've searched through the forums here and ive noticed that this question has come up a number of times, but nothing definitive has really been posted.
My program is a 'server' side portion of a mobile phone app ive written, that im trying to use as a remote to turn up the volume, skip tracks, etc. on my pc via bluetooth. Basically what im doing is sending a string from the mobile phone app to the pc telling it to increment the volume/decrement the volume by a certain amount. Can java do this natively or am i going to need to use a C++ library through JNI (which i have never done before)
Any help appreciated!
Thanks,
Craig

Victor,
I've tried your suggestions and found that the first one only alters the volume of the midi file that is being played through java. I want to be able to alter the volume of the sound that I already have coming out of my speakers, through windows master volume control.
Your second suggestion I also tried but to no luck...i always get the following exception message:
"Failed trying to find LINE_IN VOLUME control: exception = java.lang.IllegalArgumentException: Line unsupported: LINE_IN source port"This exception occurs no matter what I change LINE_IN to in this segment of code (I want to control sound output so i assume it should be either SPEAKER or LINE_OUT):
lineOut = (Port)mixer.getLine(Port.Info.LINE_IN);Any other suggestions?
I noticed on the j2se sound guide site, they mention a way to get a list of supported mixers and/or lines, but im not exactly sure how to go about doing that (maybe it will be helpful?)
Thanks for your time,
Craig

Audigy 2 Platinum sound problems (Windows XP S

Hi,
I recently formatted my computer and am having problems with my audigy 2 when listening to any sounds through my speakers-- headphones through the front panel sound fine! The best way to describe the sound is that it is 'fuzzy'... not an on-and-off fuzzy, but a constant fuzzy. I've tried playing with many of the options in Audio Console to no avail. Has anyone else experienced similar problems and found a solution? ANY help would be greatly appreciated... thanks!!

I found the solution that worked for me!
In the volume control for windows, I had to mute the microphone in playback mode, and check the box for 'Selected' in recording mode. To switch between the 2 modes, go to 'Properties' in the 'Options' menu. Hopefully this works for you like it did for me

Toshiba Excite 7.7 Sound Problems , need help!

I bought my Excite 7.7 last week ..Tis week i tried to played the mp3 songs that i stored on the micro sd card..every 2 to 3 songs it cut off the sounds for a second and then it came back again .First i thought is the poweramp player apps that i bought in Google play that course tis happened.So i switched to the Toshiba player apps, still 2 to 3 songs it cut off again.Then i even switched the micro sd card to another brand that stored my mp3 songs , stills it cut off for a second ....The last option i made a hard reset to factory setting..stills it wont work!!! ..What happened to my tablet? ..Do i need to bring it back for an exchange? ..Thank you

it does not happened to the same spot ...i am using sandisk 64gb class 10 ......last week i returned the old tablet and get a new ones ..same thing happened .comfirmed now if boot song or movie from micro sd , it will stop for a second while after sometime played ...TOSHIBA GOT TO DO SOMETHING ABOUT IT ..MAYBE AN UPDATE ... I oredi tried 2 tablets ...it happened the same thing .....

Audigy 2 Value sound problems with ga

While playing games, my sound randomly becoms crackly and screechy, and then there is no music playing, just sound effects. A while later, there will be more cracking and screeching and the music will return. I belei've this happens when the computers cooling fan switches from low to high, and vice versa, but I have not confirmed this. I am using an HP pavilion a465c.

You can see a comparison chart on this page:
http://us.creative.com/products/prod...95&nav=compare
The SNR (Signal To Noise Ratio) quality on the Audigy 2 Value is slightly lower than the Audigy 2 ZS.
Cat

TOSHIBA 40E220U SOUND PROBLEM

Whenever I'm playing NBA2K12 [XBOX360] on my tv and pause the game and then unpause it, the volume jumps up and becomes very loud for 5-10 sec. and then goes back to the normal level. This is very annoying and i have found no solutions to this problem, this is not the game because it happens with 2K11 also. When I hooked it up to my SONY downstairs everything works fine, so I know its not the console or the game. Tried resetting to factory defaults, changing outputs, changing from component to HDMI, tried fixing sound balance, audessey abx, and basically anything else you can do. Still no solution. Please help.

You may want to contact customer support at (800) 631-3811. I'm not familiar with this problem and don't have a solution to offer.
- Peter

Satellite L750D - BIOS update 2.1 and sound problem

Hello
I have little problem. I have been downloaded from your website BIOS 2.1 for Toshiba Satellite L750D (PSK32E).
I have been updated BIOS to 2.1 and start problem with sound. When I start game, music or something other only 2 first minutes sound plays properly but then it stops for no reason. No sound at all. I have been reinstalled op system but the problem is still there.
Sound works for 2 minutes only then is completely off. Every start application with sound plays 2 minutes and stop all quiet is. I have made a probe on my mother laptop its a twin laptop. I have been updated bios same problem 2 minutes and then no sound. My operating system is win 8 pro 64 my mother laptop is with win 7 x64 premium.
Two BIOS updated 2.1 ver on L750D and the problem is same. Please fix BIOS.

The BIOS seems to be very old. I was released nearly 1.5 years ago so to be honest I doubt its and BIOS issue.
I had the similar issue with my other notebook equipped with an Realtek sound card.
The sound appeared again after plugging and removing the headphone jack
But i could solve this installing the newest sound driver update from Realtek driver page.
But it seems that your Satellite does not support Realtek sound chip but Conexant sound chip.
Therefore the solution might not be useful for you.
However, I think you need to update the sound driver.I recommend you to google for Conexant SmartAudio HD driver and to test the newest available driver version.
In internet I could found the Conexant SmartAudio HD Driver version 8.65.9.51 for Win 7/ Win 8 / Win 8.1
Not quite sure if this is the newest version but you can test it.
In order to manually update your driver:
1. Go to Device Manager (right click on My Computer, choose Manage and then find Device Manager in the left panel)
2. Right click on the hardware device you wish to update and choose Update Driver Software
3. Choose to select the location of the new driver manually and browse to the folder where you downloaded the driver

Satellite L875D-S7230 Sound problems / drivers won't install

I've run a PC tech support service for over 10 years so I've tried all the standard fixes to no avail.
Main problem was after I started using my laptop with an HDMI cable to a projector -- the audio and video worked fine via HDMI, but when I disconnected the HDMI cable the laptop had no audio, and had a red x on the audio symbol in the system tray. Device manager only showed AMD High Definition Audio Device. Under Playback devices via the Sound icon (yes Disabled and Disconnected Devices are both checked) it only shows the AMD High Def device. When I reconnect the HDMI, the audio works fine. Once I thought that not properly "ejecting" the HDMI cable could be the problem, so I used Windows + P to show the Projector menu and selected Computer Only to disconnect the HDMI and then removed the cable and then the laptop audio worked, but that happened several weeks ago, and now after using HDMI again, it's back to no audio. I've reinstalled the HDMI audio, but in trying to reinstall the Realtek Audio Drivers shown on the Support page for my model, they won't install - they extract and then when I click to install, the install stops with no error warning, etc. The same with the AMD Display driver (which is supposed to contain the chipset drivers). I've been through this two hours troubleshooting process twice over the past 6 months and I am done. Any suggestions are appreciated. Here's the support page:
http://support.toshiba.com/support/modelHome?freeText=3385539

Hello , Welcome to the HP Forums, and thanks for posting! I understand you are having some issues re-installing the software for your HP LaserJet Pro M177fw Printer. I'd like to help you with this. First, I would recommend checking your programs to make sure there isn't anything listed for the LaserJet that wasn't uninstalled: Swipe inwards from the right hand side of the desktop (or press Win key + C on the keyboard). The charms bar will pop up on the right hand side of the screen.Select Settings, then Control Panel.Select Programs, then Uninstall a program.Check the list for any software indicating the printer model (select the software and click uninstall if necessary).You'll also want to make sure you have removed all instances of the printer from your devices and printers folder: Follow steps 1 and 2 above to open the Control Panel.Under Hardware and Sound, select Devices and Printers.If you see any icons for your printer, right click and select delete (or remove device).Now let's do a cleanboot of your computer (to make sure another program that is running is not interfering with your installation). You can find the steps to perform a clean boot in this Microsoft document - How to perform a clean boot in Windows Once all of this is complete, run the software install again. Please respond to let me know if we have resolved the issue!Good luck.

Please Help - sound problem

After reformatting my laptop and re installing xp pro everything works but my sound,,, before anyone suggesting I should renew my sound drivers or even update my BIOS let me mention that I have already taken those stept, the Mic works but I have no sound coming out of the laptop.....
Any Ideas????
[Edited by: admin on 02-Apr-05 15:40]

Hi Nick,
Sorry for the long delay I only just noticed your post. Easily done if you post in the middle of another thread.
To diagnose your sound problem the best approach is to systematically check (and isolate) each possible problem area until the culprit is found. For sound problems follow the sequence :-
1. Check Hardware. If you have a manual control check that it is turned fully on (this may be a wheel or knob somewhere on your notebook). There is no point carrying on if this is turned down/off.
2. Check Software. This is where the fun begins.
2.1 Check the sound properties (available from Control Panel) and make sure that the MUTE box is not ticked.
2.2 Check the individual volume levels shown on the sound properties box. Set them all to maximum.
2.3 Select Device Manager (from Control Panel) and check the entry for Sound/audio devices. Select your sound device and click the 'troubleshooting' option. Follow the on-screen checks.
2.4 If you still have no sound deinstall the sound device (from ADD/REMOVE hardware) and reboot. The system should detect the sound device and re-install it)
2.5 Finally download and reinstall the correct device drivers for your sound devive from the Toshiba web-site.
2.6 If you still have no sound after all of the above then I would recommend a complete re-install of your system from the Toshiba Recovery CDs. and if that does not correct the problem then you will need to take it to a Service Agent for them to sort it out.
HTH

Audigy 2 ZS - Toshiba SD-63HK Sound problems in XP and Vi

Similar Messages

Maybe you are looking for