Audigy 2 ZS under Vista - Line-in prob

I've a problem with my Audigy 2 ZS card running under Windows Vista Ultimate 32bits. I record using the line-in and it records fine but ONLY if I unmute the line-in sound in the speakers setup... and I just want to record it, NOT no hear it. I mean, I have the record level at 00% in the Recording Devices->Analog Mix properties, but it won't record anything unless I also set it to a high level and unmute it in Playback Devices->Speakers properties. I tryied uninstalling the drivers, then removing everything left with Driver Sweeper and the reinstalling them again, but I still have the same problem. Any ideas?
BTW, I already have checked "Record without monitoring" in the Analog Mix->Custom tab, but it only mutes the speaker output when I'm acti'vely recording, before and after that precise moment I can still hear the line-in output. Also using the Microphone device is not an option because the line-in device has a much cleaner (i.e. less noisy) signal.
Thanks!

I've reinstalled windows vista and still have the same problem... any clue how to fix it without having to go back to XP?

Similar Messages

Audigy 4 support under vista (looking to upgra

Hey everyone,
Creative site seems inconclusi've, but then again I might just be blind.
Anyways, I have a SB0228, which as you all know causes no end of issue on Vista, I can't get 5. to work and that's just not good enough. Anyways I can line up Audigy 4 cards for cheap - and I'm wondering if they work under vista?
I dont care about SPDIF and all that, I just want 5. to work. Are people having problems with the Audigy 4 or does it seem to be reasonably vista happy?

x-fi work with vista if you just need 5. ; the problem is the software package if you by one of the old X-fi (the first 4 models that appeared : xtreme music-platinum-fatalty-elite), but there is a work around : you have to install modified driver and software from youp-pax (see here : ?)?anyway, you can buy any x-fi, install the last official vista driver, and you'll get 5., no problem??
edit : remember that for the games, there is no directsound support in vista : just open AL (and Alchemy work around for some old games) ; for divx and other (music) stereo sources, X-fi are great (with cmss3D) ; the same if you use often a headset : buy an x-fi!
if you're not in a hurry, there will probably be new X-FI 2 models soon...
Message Edited by oliwek on 03-22-20070:20 AM

"Add Folder" fails to find network servers under Vista

I've got a samba file server on my network, with all my music. I want to manage my music library myself, not with iTunes. This is all working fine with my old PC (running Windows XP).
I just upgraded to a new PC, running (32-bit) Vista. I've also got the latest iTunes (7.6.0.29). On the Vista desktop, when open the Network icon, I can see (and browse inside) my samba file server(s). I've also got desktop icons that are aliases or network folders to subdirectories in the file share.
In iTunes, if I do File->Add File To Library, I get a file browser which lets me explore the Network section and get to my file servers. But that's only a single file at a time.
Obviously, what I want is to File->Add Folder To Library. And this worked fine in iTunes with my old PC under XP. But now in the new PC, under Vista, nothing from the network shows up. The (very different) "folder browser" claims to be showing the desktop, but none of my network folders that are on the desktop appear there. There is a line for "Network", with a triangle to open it. But click on the triangle, or double clicking on the Network label, causes a brief pause, and then nothing shows up underneath (and the triangle disappears).
Is this a bug in iTunes under Vista? Is there any way to add a network music folder to the iTunes library in Vista, the way I used to in XP? I certainly don't want to add a single song at a time for hundreds or thousands of songs!
Thanks,
-- Don

Nope, no luck.
I go to iTunes, then File->Add Folder To Library. In the dialog, the top entry is Desktop. The third subentry is Computer. I open it, and see only my local drives, no network drive:
+> Computer
+> Local Disk (C:)
+> Recovery (D:)
+> Linux Shared (E:)
+> DVD RW Drive (F:)
+> Removable Disk (G:)
+> Removable Disk (H:)
+> Removable Disk (I:)
+> Removable Disk (J:)
That's it. (I've got one partition share with a Linux system in dual boot; the last four "Removable Disk" partitions are a 15-in-1 media card reader.)
As for "network drives mapped to a drive letter", no I guess I don't have that. What I have is that I can browse the Network icon, which explores the Windows domain and finds my file server on the LAN. And I can explore through those subdirectories. And I can create a shortcut on the desktop to any one of them, and if I later reboot and doubleclick on the shortcut, I get directly to that subfolder on the remote samba file share.
So ... just for kicks I tried your suggestion. On the desktop, I did a "map network drive", and bound Z: to the same samba folder, and asked it to reconnect on logon. And wouldn't you know it, you're right: the Z: drive now appears in the Computer folder on the desktop, and indeed shows up in the Computer folder in the iTunes dialog box.
I still am convinced that iTunes has a bug, and it is still the case that clicking on Network in the Add Folders dialog never gives any choices, whereas exploring the Network in any other manner shows all my file servers.
But I'll give you credit: you've provided me a workaround. Much thanks!

Audigy 2 zs on Vista, no Creative Volume Cont

Hello,?Installing my audigy 2zs using the vista drivers goes without a hitch, except for the fact there is no Creative Volume Control. Which means I can't adjust bass, trebly, bass boost and similar features which I feel are a requirement for me to be using under xp. I tried to install using the original cd I got from audigy, and the volume contrl installs, but all the optional adjustments are grayed out, and the main volume control doesn't do anything. Can anyone help me with this?Cheers,?Matt?(www.highertier.co.uk)

thanks for the quick reply...
i tried everything, but it's not working.
I've re-installed the drivers a dozen times, but still
i can't choose any speaker setup in the creative audio console.
Also, in Windows, when i test the 5. speakers, i only
hear sounds from the front speakers, not the rear speakers and the center. When I connect the rear speakers to the position of the front speakers, only the rear speakers are acti've, so the cable setup is correct and the rear speakers are intact.
this is driving me crazy. Maybe because it's not a vista clean install? I updated it from XP...
Anyone else the speaker-choosing problem?

Audigy 1 + Audigy 2 ZS Platinum + Vist

So I decided to plug in my old audigy to have an extra sound card to play music and use with ventrilo.
Once I got around some problems getting the driver installed I noticed that I get no sound whatsoever out of the Audigy . When I checked the device properties for the audigy I noticed there was no tab for "Tone," "Custom," nor "Levels."
However the Audigy 2 ZS works 00%.
anyone else try this or another combination of different model Audigys?
What are the odds that this combo ever working under vista?
-- judging from some of the complaints about the lack of updates I'm thinking never?

terror_adagio wrote:
It would seem Creative's Audigy and also Audigy 2 ZS sound cards produce unwanted sound problems with RAID setu
ps.
Specifically, my testing was done on an onboard Promise 378 RAID 0 setup. The following setup was configured:Windows XP (Tested both Home & Pro)Intel Pentium 3.4C Ghz HT 800FSB2GB Corsair TWINX PC3200ASUS P4C800 Deluxe2xWestern Digital 60GB Caviar's Special Edition 8MB Cache in RAID 0Onboard Promise RAID Controller Fasttrak 378 (old and newest drivers tested)Creative Sound Blaster Audigy MP3+ Retail & Creative Sound Blaster Audigy 2 ZS Retail (all available drivers tested)The sound problems are heavily distorted sounds, cracks, cut-outs, and hissing when any type of audio is playing and is especially apparent with using the hard dri'ves.The standard Intel based Non-RAID configuration contains zero problems with any sound. It is only when users are using RAID that these problems occur. It would definitely be in Creative's best interest to investigate this issue and resolve a solution. This problem has been around for a long time, with no support from Creative.Please note, the onboard sound audio was tested with RAID setups and non-RAID setups and there were never any sound problems with either. All available PCI slots were tested and various PCI Latency configurations were tested within the BIOS. No solution was found.
Hi, have you find a solution?
I try to disable the Promise PDC20378 controller and the problem seems disappeared.

Duplicate files appearing in Windows Photo Gallery under Vista Home Basic.

I am suffering a bout of duplications in my Windows Photo Gallery under Vista. I am getting duplicates, triplicates and quadruple versions of the original file.
Despite turning off all Autoplay media types to 'No Action', I get random duplicates when I try to enter update pictures from camera or memory chip through a USB port. There is no 'Enter Updates Only' option, and Microsoft says that this is unnecessary as
duplication is prevented. The duplicates however appear with 'copy' in the file name after the image numbering system. My preference is to view the memory contents via 'Computer' - select and open the port, and view, then copy and paste into Photo
Gallery. Photo Gallery kicks in to view the chip correctly, but often/always (?) promptly uploads uncommanded. It did not used to do this, only in the last year or two.
What do I do, it is driving me crazy ?

Hi,
As I know, for Duplicate issue, it might be caused by a corrupted database, please try to rebuild it as a test.
Close Windows Photo Gallery
First show hidden files.Navigate to C:\Users\Usename\AppData\Local\Microsoft\Windows Live Photo GalleryRename “Pictures.pd” to “Pictures.pd.old” (without quotes) and reopen Windows Photo Gallery.
Yolanda Zhu
TechNet Community Support

Need to switch off and on my apple tv v2 each time I want to connect my PC under vista

Hello
need to switch off and on my apple tv v2 each timeI I want to connect my PC under vista.
After that, everything is going well...
But it is not the best user experience ;-)
Any idea if this can be fixed ?
My PC is under Vista...
Thanks a lot

I'm having the same problem. It seems to have started after the most recent firmware upgrade. Does anybody know if Apple is looking into this? It's rather irritating to have to reboot the Apple Tv every time I want to use it!

ITunes 7.3.1 under VISTA causes DVD/CD driver conflicts or blockage !!!!!!!

After installing iTunes under VISTA I noticed that both of my DVD/CD drives were missing. Device manager shows a conflict or blockage causing the drivers not to start.
I tried iTunes 7.3.1 on another PC with VISTA and it did the same thing. I had to remove iTunes since it basically disables by DVD and CD drives. Any ideas?

Actually everything is working just fine after I had
uninstalled iTunes 7.3.1. Oh, I didn't have error
code 31 but just for your information it was 10.
Please don't give bad advice to people or perhaps to
some that don't even know what regedit is or will
even do for that matter. Apple should be able to
put together a script that will get the job done
correctly without having the enduser try a dangerous
tool.
I love how you're asking for help, and then refusing the help provided. Regedit is complex, but that article goes through it step by step, and even gets you to export the specific registry tree that you will be working on, so you can set the registry back to how it was before.
However, the regedit fix that was mentioned earlier would be the easiest thing to go through. If you go through the steps and it doesn't work, try going through the exact same steps again, except skip the step where is says to enter 'GEARAspiWDM' in the UpperFilters. If you just leave UpperFilters blank, and restart the computer, the CD drive should re-appear, and iTunes should work (but give you a message saying that you'll be unable to import or burn CD's... although most of the time you still can anyways). If it doesn't work, you can always import the registry tree back to how it was before, and close out of that scary regedit program.

Secure Web.Show_Document with forms10.1.2.3 under vista Need authentication

Hi All
I installed forms 10.1.2.3 successfully under Windows Vista , i use Java Bean described in the OTN Forms document titled "Oracle Forms Services - Secure Web.Show_Document calls to Oracle Reports" ,but when the form calls the report, the following error message :
"REP-51018: Need database user authentication" is presented to the user.
note : I did this before successfully with forms 10.1.2.0.2 under windows xp
What is wrong with me please under Vista ?
Note :The Java console give this :
Java Plug-in 1.5.0_12
Using JRE version 1.5.0_12 Java HotSpot(TM) Client VM
User home directory = C:\Users\crizma1
network: Loading user-defined proxy configuration ...
network: Done.
network: Loading proxy configuration from Internet Explorer ...
network: Done.
network: Loading direct proxy configuration ...
network: Done.
network: Proxy Configuration: No proxy
basic: Cache is enabled
basic: Location: C:\Users\crizma1\AppData\LocalLow\Sun\Java\Deployment\cache\javapi\v1.0
basic: Maximum size: unlimited
basic: Compression level: 0
basic: Plugin modality.register
c: clear console window
f: finalize objects on finalization queue
g: garbage collect
h: display this help message
l: dump classloader list
m: print memory usage
o: trigger logging
p: reload proxy configuration
q: hide console
r: reload policy configuration
s: dump system and deployment properties
t: dump thread list
v: dump thread stack
x: clear classloader cache
0-5: set trace level to <n>
basic: Registered modality listener
liveconnect: Invoking JS method: document
liveconnect: Invoking JS method: URL
basic: Referencing classloader: sun.plugin.ClassLoaderInfo@e34726, refcount=1
basic: Added progress listener: sun.plugin.util.GrayBoxPainter@7be8c2
basic: Loading applet ...
basic: Initializing applet ...
basic: Starting applet ...
basic: Referencing classloader: sun.plugin.ClassLoaderInfo@e34726, refcount=2
basic: Releasing classloader: sun.plugin.ClassLoaderInfo@e34726, refcount=1
network: Connecting http://mostafa:8889/forms/java/frmall.jar with proxy=DIRECT
basic: Loading http://mostafa:8889/forms/java/frmall.jar from cache
basic: Reading cached JAR file from JRE 1.5 release
basic: Certificates for http://mostafa:8889/forms/java/frmall.jar is read from JAR cache
security: Loading Root CA certificates from C:\PROGRA~1\Java\JRE15~2.0_1\lib\security\cacerts
security: Loaded Root CA certificates from C:\PROGRA~1\Java\JRE15~2.0_1\lib\security\cacerts
security: Loading Deployment certificates from C:\Users\crizma1\AppData\LocalLow\Sun\Java\Deployment\security\trusted.certs
security: Loaded Deployment certificates from C:\Users\crizma1\AppData\LocalLow\Sun\Java\Deployment\security\trusted.certs
security: Loading certificates from Deployment session certificate store
security: Loaded certificates from Deployment session certificate store
security: Loading certificates from Internet Explorer ROOT certificate store
security: Loaded certificates from Internet Explorer ROOT certificate store
security: Loading certificates from Internet Explorer TrustedPublisher certificate store
security: Loaded certificates from Internet Explorer TrustedPublisher certificate store
security: Checking if certificate is in Deployment permanent certificate store
basic: Loaded image: jar:http://mostafa:8889/forms/java/frmall.jar!/oracle/forms/icons/splash.gif
basic: Loaded image: jar:http://mostafa:8889/forms/java/frmall.jar!/oracle/forms/icons/oracle_logo.gif
basic: Loaded image: jar:http://mostafa:8889/forms/java/frmall.jar!/oracle/forms/icons/bgnd.gif
network: Connecting http://mostafa:8889/forms/java/oracle/forms/registry/Registry.dat with proxy=DIRECT
network: Connecting http://mostafa:8889/forms/java/oracle/forms/registry/default.dat with proxy=DIRECT
proxyHost=null
proxyPort=0
connectMode=HTTP, native.
network: Connecting http://mostafa:8889/forms/frmservlet?form=d:%5CFEMTOSOFT%5CACC%5Cmainmenu&separateframe=true&acceptLanguage=ar-eg&ifcmd=startsession with proxy=DIRECT
network: Connecting http://mostafa:8889/forms/lservlet;jsessionid=0125fc1e6334c60e076ddfdd063a1d231270ff1507db8a2efc0666273e237011?ifcmd=getinfo&ifhost=Mostafa&ifip=192.168.1.2 with proxy=DIRECT
network: Connecting http://mostafa:8889/forms/lservlet;jsessionid=0125fc1e6334c60e076ddfdd063a1d231270ff1507db8a2efc0666273e237011 with proxy=DIRECT
network: Connecting http://mostafa:8889/forms/java/frmrwinteg.jar with proxy=DIRECT
java.io.FileNotFoundException: http://mostafa:8889/forms/java/frmrwinteg.jar
 at sun.net.www.protocol.http.HttpURLConnection.getInputStream(Unknown Source)
 at sun.plugin.net.protocol.http.HttpUtils.followRedirects(Unknown Source)
 at sun.plugin.cache.CachedJarLoader.isUpToDate(Unknown Source)
 at sun.plugin.cache.CachedJarLoader.loadFromCache(Unknown Source)
 at sun.plugin.cache.CachedJarLoader.load(Unknown Source)
 at sun.plugin.cache.JarCache.get(Unknown Source)
 at sun.plugin.net.protocol.jar.CachedJarURLConnection.connect(Unknown Source)
 at sun.plugin.net.protocol.jar.CachedJarURLConnection.getJarFile(Unknown Source)
 at sun.misc.URLClassPath$JarLoader.getJarFile(Unknown Source)
 at sun.misc.URLClassPath$JarLoader.<init>(Unknown Source)
 at sun.misc.URLClassPath$3.run(Unknown Source)
 at java.security.AccessController.doPrivileged(Native Method)
 at sun.misc.URLClassPath.getLoader(Unknown Source)
 at sun.misc.URLClassPath.getLoader(Unknown Source)
 at sun.misc.URLClassPath.getResource(Unknown Source)
 at java.net.URLClassLoader$1.run(Unknown Source)
 at java.security.AccessController.doPrivileged(Native Method)
 at java.net.URLClassLoader.findClass(Unknown Source)
 at sun.applet.AppletClassLoader.findClass(Unknown Source)
 at java.lang.ClassLoader.loadClass(Unknown Source)
 at sun.applet.AppletClassLoader.loadClass(Unknown Source)
 at java.lang.ClassLoader.loadClass(Unknown Source)
 at java.util.ResourceBundle.loadBundle(Unknown Source)
 at java.util.ResourceBundle.findBundle(Unknown Source)
 at java.util.ResourceBundle.getBundleImpl(Unknown Source)
 at java.util.ResourceBundle.getBundle(Unknown Source)
 at oracle.forms.registry.MessageManager.getMessage(Unknown Source)
 at oracle.forms.registry.MessageManager.getMessage(Unknown Source)
 at oracle.forms.engine.Runform.createInitialMessage(Unknown Source)
 at oracle.forms.engine.Runform.sendInitialMessage(Unknown Source)
 at oracle.forms.engine.Runform.startRunform(Unknown Source)
 at oracle.forms.engine.Main.createRunform(Unknown Source)
 at oracle.forms.engine.Main.start(Unknown Source)
 at sun.applet.AppletPanel.run(Unknown Source)
 at java.lang.Thread.run(Unknown Source)
basic: WARNING: error reading http://mostafa:8889/forms/java/frmrwinteg.jar from cache.
basic: httpCompression = true
basic: Downloading http://mostafa:8889/forms/java/frmrwinteg.jar to cache
basic: encoding = null for http://mostafa:8889/forms/java/frmrwinteg.jar
network: Connecting http://mostafa:8889/forms/java/myappicons.jar with proxy=DIRECT
basic: Loading http://mostafa:8889/forms/java/myappicons.jar from cache
basic: No certificate info, this is unsigned JAR file.
network: Connecting http://mostafa:8889/forms/java/oracle/forms/engine/RunformBundle_ar_EG.class with proxy=DIRECT
network: Connecting http://mostafa:8889/forms/java/oracle/forms/engine/RunformBundle_ar_EG.properties with proxy=DIRECT
إصدار بريمج Forms هو : 10.1.2.3
network: Connecting http://mostafa:8889/forms/lservlet;jsessionid=0125fc1e6334c60e076ddfdd063a1d231270ff1507db8a2efc0666273e237011 with proxy=DIRECT
network: Connecting http://mostafa:8889/forms/lservlet;jsessionid=0125fc1e6334c60e076ddfdd063a1d231270ff1507db8a2efc0666273e237011 with proxy=DIRECT
basic: Loaded image: jar:http://mostafa:8889/forms/java/frmall.jar!/oracle/forms/icons/frame.gif
network: Connecting http://mostafa:8889/forms/lservlet;jsessionid=0125fc1e6334c60e076ddfdd063a1d231270ff1507db8a2efc0666273e237011 with proxy=DIRECT
network: Connecting http://mostafa:8889/forms/lservlet;jsessionid=0125fc1e6334c60e076ddfdd063a1d231270ff1507db8a2efc0666273e237011 with proxy=DIRECT
Edited by: Mostafa Abolaynain on Jun 18, 2009 7:50 PM

If I am remembering correctly, some changes were necessary in order to make this work with 10.1.2.3. So, if you are using the old jar which you used in previous versions, I would recommend obtaining the one specifically updated for 10.1.2.3. Refer back to the OTN page which has the download and choose the link that references the new version:
http://www.oracle.com/technology/products/forms/techlisting10gR2.html
Be sure to clear the client Jar cache before re-testing. This is not the same as the browser cache.

Light Room Under Vista 1.3.1

Hello, I purchased lightroom back in 4/07 with hopes of eventually getting a new computer around christmas.
So around christmas I got my new computer and moved my copy of LightRoom from an XP machine to a Vista Home Premium Machine. Quad core 6600 2.4GHz 3GB Memory and 512MB Nvida 8800GT Graphics card. It seemed to run okay at first but then when I updated from 1.0 to 1.3.1 it got to were it barely runs. It can take upto 5 hours for it to import 25 10MP raw files from a card to DNG format, creating standard previews. about 20minutes ago I clicked auto tone for a photo still waiting 20 minutes later for the new render of the file.
I have tried disabling the AERO Feature, I have tired deleting and recreating the preference file.
On Adobe's website it shows it is windows vista compatible, but now that I click on there tech support site is shows they don't guarantee it to work under vista.
Then I read under the knowledge base that NVIDA Display Manger software creates a know issue with this. So they stat I should remove it. I am not sure if I have the version the reference as it is not called the same. But serves the same function and comes from NVIDA. It just seems kind of silly I buy a new computer with 2 22" monitors to work on photographs. Buy the software that is suppose to be great only to read in the knowledge base they recommend that you remove dual monitor support from your computer to get things to run. This really seems odd considering they tout my other software photoshop and its ability to use multiple monitors. Hence the reason I upgraded my machine in the first place.
Any help anyone can give it getting on the path to once again being able to use lightroom would be great.

Hello Breezez,
I think there must be something else going on on your computer, the dual monitor support should be no problem. I use Lightroom under Vista on a less powerfull machine with Aero switched on, dual screens and DNG files and have no problem whatsoever. I use an ATI Radeon X800 Pro video adapter, not exatly the most up to date video card for that matter. My database contains more the 7000 photographs, most af them DNGs. I would be surprised if the slow speed had anything to do with using two screens. It sounds as if some other process is eating processor capacity. Checking for updates for your video card, BIOS and chipset drivers seems good advice to me. Try switching off the antivirus program (temporarily of course!). There might be a resource conflict.
Hans

D7263. Wrong printout colors under Vista/Wrong borderless printing.

    Getting dull colors while printing under Windows Vista from Print Manager or any application (Photoshop CS3). Colors are as expected (ok) while I print those photos under XP virtual machine (from under Vista Ultimate).
    Another problem is stupid results with borderless printing.Though I prepare dimension of the photo to match paper size (lets say 4x6inch x 600dpi), using borderless printing option, I always get printouts cutted about 0,2 inch on EVERY side.
    I got strange result from HP online consulting in July or August: "We do not have correct driver for Windows Vista yes. That's why you have those problems. We expect new driver SOON."
    As the latest version of the Vista driver is 10.0 (02/2008) and I use it, I do not know how to use my Photosmart for photo printing under Vista...
    Any suggestions?

system ink has failuor

Can't start device-manager.exe under Vista

Can't start C:\Program Files\NetBeans 6.9\javafx\javafx-sdk\emulator\mobile\bin\device-manager.exe under Vista 32. It works fine under Windows XP
error is java.net.BindException: Address already in use: JVM_Bind
I changed C:\Program Files\NetBeans 6.9\javafx\javafx-sdk\emulator\mobile\toolkit-lib\modules\bootstrap\conf\system.properties
I tried
device-manager.object-registry.host: 127.0.0.1
device-manager.object-registry.port: 61309
no success
my C:\Windows\System32\drivers\etc\hosts consists
127.0.0.1 localhost
::1 localhost
error output is
[ 2408] DEBUG - un.jme.toolkit.bootstrap.Batch - Called create on cldc-ConnMg
rBridgeFactory
[ 2409] DEBUG - un.jme.toolkit.bootstrap.Batch - Calling create on cldc-Midle
tMgrBridgeFactory
[ 2409] DEBUG - un.jme.toolkit.bootstrap.Batch - Called create on cldc-Midlet
MgrBridgeFactory
[ 2409] DEBUG - un.jme.toolkit.bootstrap.Batch - Calling create on cldc-Profi
lerBridgeFactory
[ 2409] DEBUG - un.jme.toolkit.bootstrap.Batch - Called create on cldc-Profil
erBridgeFactory
[ 2409] DEBUG - un.jme.toolkit.bootstrap.Batch - Calling create on cldcnokdp-
ConnMgrBridgeFactory
[ 2409] DEBUG - un.jme.toolkit.bootstrap.Batch - Called create on cldcnokdp-C
onnMgrBridgeFactory
[ 2410] DEBUG - un.jme.toolkit.bootstrap.Batch - Calling create on cldcnokdp-
MidletMgrBridgeFactory
[ 2410] DEBUG - un.jme.toolkit.bootstrap.Batch - Called create on cldcnokdp-M
idletMgrBridgeFactory
[ 2410] INFO - un.jme.toolkit.bootstrap.Batch - Calling start() methods...
[ 2410] DEBUG - un.jme.toolkit.bootstrap.Batch - Calling start on DeviceAddre
ssManager
[ 2419] DEBUG - un.jme.toolkit.bootstrap.Batch - Called start on DeviceAddres
sManager
[ 2419] DEBUG - un.jme.toolkit.bootstrap.Batch - Calling start on DeviceRegis
trationNotifier
[ 2419] DEBUG - un.jme.toolkit.bootstrap.Batch - Called start on DeviceRegist
rationNotifier
[ 2419] DEBUG - un.jme.toolkit.bootstrap.Batch - Calling start on HttpServer
[ 2494] DEBUG - un.jme.toolkit.bootstrap.Batch - Called start on HttpServer
[ 2494] DEBUG - un.jme.toolkit.bootstrap.Batch - Calling start on RapiClientS
ervice
[ 2500] ERROR - sun.kvem.tools.http.HttpServer - java.net.BindException: Addr
ess already in use: JVM_Bind
java.net.BindException: Address already in use: JVM_Bind
at java.net.PlainSocketImpl.socketBind(Native Method)
at java.net.PlainSocketImpl.bind(Unknown Source)
at java.net.ServerSocket.bind(Unknown Source)
at java.net.ServerSocket.<init>(Unknown Source)
at java.net.ServerSocket.<init>(Unknown Source)
at com.sun.kvem.tools.http.HttpServer.createServerSocket(Unknown Source)
at com.sun.kvem.tools.http.HttpServer.run(Unknown Source)
[ 2547] ERROR - sun.kvem.tools.http.HttpServer - java.net.BindException: Addr
ess already in use: JVM_Bind
java.net.BindException: Address already in use: JVM_Bind
at java.net.PlainSocketImpl.socketBind(Native Method)
...

I am having the same problem here with Windows 7 64bit. Why are most of Oracle forum posts are left unanswered. Found many people having similar problems, but nobody seems to have the answer. Anybody, please help
Thank you in advance
Regards,
pra

Error installing FlsahPlayer under Vista 32 SP1 with Explorer 7

Please help me. I cannot install the latest Adobe Flash
Player. Always feezes the Internet Explorer. I can download, but
than stops the install. I changed the safly settings to the
recommended level, but the problem same.
I have Vista 32 SP1, IExplorer 7.
Thank you.
[email protected]

You may want to try a few different SD cards, there are apparently some which do not play well with Vista.
Personally I haven't had any issues with a 2GB SanDisk SD card running as ReadyBoost in an X61 under Vista Ultimate x64.
Cheers,
Bill
I don't work for Lenovo

Under each line item i should get an underline

In my smartforms under each line item i should get an underline,how to do it.

Hi,
i think you just want underlines but not horizontal lines.
If you want underline check the paragraph which was already used for that item, create another paragraph
format as your old one and select the underline optine for your new paragraph format in the style and assign the
same paragraph where you exactly required.
if you want horizontal lines.
1). Select the pattern any if suitable to your requirement.
2). In the text node you can write contiouns '_'.
3). In the text node output options check the frame check box and in the pattern select upper line or bottom line
but in table or template you can't select the frame check box.
Thanks,
Phani.

Removing space under a line chart

How do I remove the space under a line chart? Its as if space is held for axis labels on the bottom of the chart, even though I do not have any. I ve already set Additional Formatting Options - Bottom Padding and Height. Thanks

Hi Sophia,
Id you could send me the screen shot of the chart that would give me better understanding to resolve your issue.

Audigy 2 ZS under Vista - Line-in prob

Similar Messages

Maybe you are looking for