Audigy 2 ZX Platinum + Audig

I have installed about a year ago on my PC a second sound card and now I have:? Audigy 2 ZX Platinum with external box - Default Sound Card Audigy 2?I use them because I have a small home studio so I plug in all my instruments and it allows me to record in real time with effects several instruments and mics. They are working in perfection!?The only problem I have is that the remote is no longer working with the external box. It's not a battery problem... I think it's some kind of conflict due having another sound card installed. Is there something I can do so I can use the remote again?Thank you!

Anybody?

Similar Messages

Audigy 2 Platinum Ex No longer working properly under vista

;Audigy 2 Platinum Ex No longer working properly under vistat I have just upgraded to vista and I find my sound card to be no longer functional
I have upgraded all the fri'vers I can find
SBAX_PCDRVBETA_US_2_8_000.exe
creative_sbxfi_250002_vista.exe
and a couple of others that SecurityCentre found
And when I open "Surround Mixer" I get "The selected soundcard is not supprted by the application," whatever the hell that means.
Ihave spent all day researching installing rebooting, and cannot get microphone, and all the other functions "what you hear" etc to work.
What must I do to get this perfectly good sound card to work please. Vista has been out for some time now, and I would export supportingdrivers yo have been redily visible.
Thank you in anticipation.

? I guess Creative doesn't care about living up to the promise that their product is upgradeable as new technologies emerge such as VISTA. They were give plenty of warning, that it was coming out, and it has been out for some time. I guess the $700AUS I spent is down the tubes, because the lazy people at creative cannot be bothered to bring it into compatibility - AS PROMISED with "peace of mind" they said. There is no way that I will acti'vely tell people how good creative is any more. In fact I will be acti've in just the opposite.
Get of your backsides and support AS PROMISED, we deserve it, instead of giving us second rate partial compatibilities. I have wasted the best part of a week trying to get it all sorted, where do I send the bill for my time? Hvae I got sour grapes? No, I just expect decent support as promised.
I issue the challenge - ?Provide decent support and I will retract. Fair is fair. I PROMISE.

Audigy 4 platinum pro Microphone im

Simple one here, i'm just about to buy some leads to connect my condensor mic to my external hub. I just bought a preamp, yet don't have all the leads for it to work. Will a 'balanced /4" TRS connector' fit into the 'Mic imput'/'line-in' of my Audigy 4 platinum pro soundcard? This is opposed to an 'Unbalanced /4" TS connector'. Help will be appreciated! Carry on being CREATIVE
P3U6!SUn 3H+

Hi there,
I nearly freaked out when I got the platinum pro as I thought I could get no decent power in direct guitar and microphones. You said you bought a preamp, but there is a preamp switch for Line In/Mic on the front of the hub. I have been using this for boosting mic and guitar signals and it is okay but was wandering what preamp you bought and if you rate it.
Hope I haven't upset you by telling you about the built in pre-amp as it probably isn't the best quality anyway.
Cheers,
Paul D.

Audigy 2 Platinum sync probl

Hello. I have had an Audigy 2 Platinum for over a year now and use it as a decoder for our pioneer stand alone dvd player.Speakers are Megaworks 550. The problem is the audio lags behind the video after an hour or so into the movie. The souncard is in its own irq 8 with no conflicts. The latest drivers and software are installed and the same with xp pro service pack 4.Any idea how to resolve this for the only fix now is to stop and restart the player or toggle between spdif ac3 decode and default i audio hq. Im getting fed up with this and will just get a regular reciever and speakers if it cannot be resolved . Thanks in advance.
Bug

I came here looking for this exact problem. However mine is NEVER in sync when I use the SPDIF mode. As soon as I turn it to normal stereo it works fine. In a related issue, the sound playback of any DVD is about half of everything else on my system. I have to turn up the volume to about 80% to hear a DVD at a listenable level whereas normal volume for me is at 40%.
My stats are as follows: P4 3.2c, Abit IC7-G, 2GB DDR PC3200, Audigy 2 ZS Platinum, BFG 6800GT OC, XP Home SP2, and the Nvidia DVD Decoder. Everything is running the latest drivers. The volume problem has been happening ever since I purchased this ZS. I never had the problem with my older Audigy 2. The SPDIF issue is new to me since I have only recently been using it. Any ideas?
Message Edited by aqualite75 on 2-3-2004 2:5 AM

Midi ports line in ports Fire Wire etc on the Audigy 2 platinum, new Creative Driver for Vis

Hi, I have been using my Audigy 2 platinum dri've for a few years now and have been very pleased with it, the main things I do on my pc is music creation mainly Midi but also some analogue audio as well, I also do lots of video making. I am just about to build a new system with Vista ultimate as the platform, I currently use XP Pro. I have little use for Creative?s own software and personally I do not think it is that good, I know Creative have released a new driver for my sound card But, my question is will my Midi port connections and things like my line in and the auxiliary ports and the fire wire port on the front platinum panel work with this new driver, and without the Creative software installed on my pc, and as we all no by now it looks like we will not be seeing any at all, or not for ages yet. you see I am a wheelchair user and I can not readily fiddly about a the back of my pc that is why a bought the sound blaster so I can easily plug in and unplug what I like, can anyone give me some help or advice on this issue please. ??

Guess I wasn't clear enough. I have uninstalled the soundcard and reinstalled over a dozen times even going so far as making sure all the drivers that the device properties lists are really deleted from the system. I have resinstalled DirectX at least twice using the latest version from MS. The only thing I have not done with DirectX so far is installed the SDK version which I will be doing eventually anyway. I even uninstalled and then reinstalled my video card as it shared files with the sound card. As for getting the latest version of openAL I see little point in that as Windows forces openAL through DirectX anyway and none of my games use it. Nor does the device depend on it to work. Any other suggestions?

Is Creative Audigy 2ZS Platinum Sound Cardcompatible with Yamaha Keyboards? (XG sound

Hi,
I have an Yamaha PSR -550 keyboard that can generate Yamaha XG sound forms in addition to General Midi. Now I want to buy a sound card that is 00% compatible with this key board so that I can connect it to computer.
Are Creative Audigy 2ZS Platinum/ Platinum pro sound cards compatible with Yamaha keyboards (especially when it comes to reproducing XG sounds)?
Thanks for your time
Vijjee

Hi,
I have an Yamaha PSR -550 keyboard that can generate Yamaha XG sound forms in addition to General Midi. Now I want to buy a sound card that is 00% compatible with this key board so that I can connect it to computer.
Are Creative Audigy 2ZS Platinum/ Platinum pro sound cards compatible with Yamaha keyboards (especially when it comes to reproducing XG sounds)?
Thanks for your time
Vijjee

Connecting vcr to external SB Audigy 2zs Platinum Pro

I've just joined, so apologies if I "mess up". I have some precious things on vhs tape, and want to transfer them to cd/dvd. I run Windows XP. I have to use rca connections, don't think there's another option on the vcr. I see the red and white rca connections on the back of the external 2zs, but where does the yellow (video) connection go? Would be very grateful for help. TIA.
Sybil
Message Edited by Drummond on 04--2009 05:32 [email protected]

Re: connecting vcr to external SB Audigy 2zs Platinum Pro~ Hi Katman - many thanks for the reply. There is no video connection on the SBA2zs that I can find either. I did send mail to Creative, but they haven't had the courtesy to respond. If I use the 2zs for the audio connection, can I then attach the video connection from the vcr to a separate video capture card? Will this bring everything together and in synch? Sorry, I'm still very much on L plates with all this. Once I get things on to the computer, I can then edit out what I don't want, and burn the rest to cd/dvd; or that's what I'm hoping!! It's getting the data from the vcr tape that's the stumbling block. I know there are?expensi've machines that you can put the vhs tape in and it will copy direct to dvd, my friend has one, but she doesn't know whether you can pause the recording (disk) and let the tape continue running till she gets to the next bit she wants to copy, then start the disk again. TIA of further help.
Sybil
Message Edited by Drummond on 04-3-2009 04:05 AM

Audigy 2ZS Platinum Pro - breakout box not work

I have an an external external breakoput box which was working fine in my old computer. I upgraded the mother board and cpu and installed the Audigy as before. The actual card works but the break out box doesn't light up. If I plug the external box firewire cable in to another firewire port on the computer the power LED lights but that's all. Any ideas anyone?

I am sorry to bump this topic but it is the same as my question and does not seem to have been answered.
I have a Audigy 2ZS Platinum Pro - my old one which I decided to use in lieu of the on-board sound. I installed the latest drivers I could find SBAX_PCDRV_LB_2_18_0017.exe (after unistalling the existing ones)
The card itself works fine but the external interface box is as dead as a doornail. The power for the interface is supposed to come from the two connectors.
No lights no nothing - obviously I have checked the leads and the seating of the card itself. Playback is fine on MP3, midi, wave files etc. I have disabled the on-board sound in the BIOS of course.
Unfortunately the jacks on the back of the card are 1/8 in. outputs only and the external interface provides the inputs which I need for recording etc. They are 1/4in proper ones - guitar lead size which are much better.
I know it is an old card but I like it. The last time I used in in my old computer it was fine. Card/drivers show up in the device manager. I have installed this both on a Win 7 partition and a Win XP partition on my 2 HDDs with the same result. :mansad:
<font color="#0000FF">Any ideas appreciated! Is there something I am doing wrong? Thanks.

Problem with mic in on audigy 2 platinum

Hello,
When I try to record signal from my stereo microphone (for example sony ecm 959a) and I'm switchng to "mic in" only one channel is recording. When I'm switching to "line in " everything is ok (but then I can't use gain). "Mic in" in Audigy 2 platinum ex is mono or something?
Thx for help!

AFAIK it's mono.
You need to read something like [url="http://homerecording.com/sound_card_basics.html">this[/url].
I'm surprised you got both channels to work at all.

Connecting Audigy 2 Platinum I/O to new Audigy 2 ZS (urgent answers p

Hi everybody,I am currently using an Audigy 2 Platinum with fron panel. Because this card is 6. card and I have 7. Creative Speakers, I am going to buy Audigy 2 ZS (7.). But I don't want to purchase Audigy 2 ZS Platinum because I already I have front panel. So my question is; Can I use my Audigy 2 Platinum's I/O Front Panel with Audigy 2 ZS? Audigy 2 ZS has got AD_EXT Pins on its board but I wanted to ask you if it will work?And also does Audigy 2 ZX come with MediaSource 2 or ?Thanks a lot

Craigcharlie,
I am not sure exactly what the differences are, but my understanding is that some of the chips used may be different (and of course they are labeled differently). Functionally they are the same so there is no reason why you should have a problem with it.
The difference between the way the Audigy 2 and the original Audigy is quite a bit. This means that the dri've bays for the two are not compatible. Although connecting them shouldn't cause damage, they are not the same connection and there is always the possibility. Since the Audigy dri've won't work with the Audigy 2 or 2 ZS I would recommend not connecting them.
Jeremy

Audigy 2 Platinum used to work fine, now it doesn'

Hi,
I've been using my audigy 2 Platinum to record myself playing guitar for the past 2 years. I have my guitar amp hooked up (via send input on the back of the amp) to the Line In 2 (MIC IN 2) input. Lots of the time ill be up late recording stuff, so i turn my master volume down on the amp (so it doesn't come out of the amp) and just have it come out of my pc speakers. This time, the sound thats comming out of the speakers is just ugly noise. When i'm not playing anything it just hums. When i play something it just sounds like crap. I thought at first it might just be the speakers, so i recorded something and listend to it on different speakers, sounded exactly the same. So next thing i tried was a different guitar amp. Same thing. So i then opened up my tower to see if anything looked strange, everything looks fine. Next i uninstalled and reinstalled the drivers thinking that might help, sure enough, no help. I came here and read the FAQs and tried anything that sounded like it might help. Still havn't the same problem. I am completly baffled now. Is it possible i could have damaged it the last time i used it's If anyone has any ideas for me please let me know. I am running WinXP service pack 2. Thanks
Edit. I have also tried different cables.Message Edited by zedfour on 09-20-2005 02:24 AMMessage Edited by zedfour on 09-20-2005 07:25 PM

Hi Louie,
Thanks for confirming that is the correct directory. I agree cloning directories isn't the proper solution and would like to help identify what actually went wrong. Perhaps a mapping was removed from CF Admin. It's intriguing that expandPath('/secure') resolves to the proper directory but <cfobject name="getreqstatus" component="secure.common.getreqstatus"> throws an error that it can't find the getreqstatus.cfc that's located in secure's "common" subdirectory.
Just to be clear, is C:\ColdFusion10\cfusion\bin\xxxx-Dev the website's root directory? And is there also an Application.cfc file at C:\ColdFusion10\cfusion\bin\xxxx-Dev\Application.cfc as well as the one at at C:\ColdFusion10\cfusion\bin\xxxx-Dev\secure\Application.cfc?
Could you create a file named bar.cfm w/ this code?
<cfscript>
writeOutput(expandPath("/secure"));//should return "C:\ColdFusion10\cfusion\bin\xxxx-Dev\secure"
writeOutput("<br>" & expandPath("/secure/common"));//should return "C:\ColdFusion10\cfusion\bin\xxxx-Dev\secure\common"
writeOutput("<br>" & expandPath("/secure/common/getreqstatus.cfc"));//should return "C:\ColdFusion10\cfusion\bin\xxxx-Dev\secure\common\getreqstatus.cfc"
writeOutput("<br>" & fileExists(expandPath("/secure/common/getreqstatus.cfc")));//should return "YES"
writeDump(var=new secure.common.getreqstatus(), format="text");//should return "[cfc1] component secure.common.getreqstatus"
</cfscript>
Then could you place a copy of that file at C:\ColdFusion10\cfusion\bin\xxxx-Dev\bar.cfm and C:\ColdFusion10\cfusion\bin\xxxx-Dev\secure\bar.cfm, and then run both (so basically, www.yourdomain.com/bar.cfm and www.yourdomain.com/secure/bar.cfm) and see what is displayed?
Edit: Please rename or remove the cloned directories (i.e. the /secure/common within the calling routine's directory) before running the above.
Thanks!,
-Aaron

Need drivers for Sb0250 Audigy 2 Platinum

I am racking my brain trying to get the Vista drivers to make the Audigy 2 platinum SB0250 work. The card works fine but I cannot get a signal to or from the front panel sb0250 dri've and creatives website does not seem to have them. Any help?

Daniel K.'s Audigy support pack 3.6 will recognize your DELL card and you get see the info here:
http://forums.creative.com/t5/Sound-Blaster/SB-Audigy-Series-Support-Pack-3-6--09-2009/td-p/540934
I have used Dan's packs on OEM Dell cards before. He usually puts the hardware ID in his inf file.

Inspire P7800 connected to Audigy 2 Platinum

Help please. I properly (as far as the diagram shows) connected my new speakers to my existing Audigy 2 platinum sound card (not the front console but the sound card itself) but I do not seem to have the original sound card CD so downloaded the newest driver from Creative downloads and installed that. No matter what I do I can only get sound out of one speaker. What am I doing wrong?

There is only one choice. To get digital on the Z-5500, you have to use it's decoder (because you cannot turn it off). If you try to use the Audigy 2's decoder, you will get no sound. You can't send a decoded signal to another decoder.
In the Audigy 2 settings, select "spdif passthrough". This will disable the Audigy 2's decoder and just send the compressed digital signal to the Logitech Z-5500 control pod and it will then do the decoding (that's if you have the "coax" setting on in the control pod. Also make sure to have the DVD player software also set to "spdif" for the speaker selection.
You will be then be good to go. You can use the Z-5500 to switch between analog and digital (do not disconnect the 3 analog cables from the Audigy 2 to the Logitech Control Pod).

Audigy 2 Platinum Front Panel Connecti

I recently began recording my band in our home studio. My mixing board is a Midas Venice 240 which has two balanced XLR outputs from the master bus. I am wondering what method I may use to connect this output to the /4" stereo input on the front panel of the Audigy 2 Platinum. If I just purchase a Y-adapter to combine the two channels into one XLR and then convert it to /4" TRS jack will both channels be preserved? Are there any sound quality issues that arise from this method of connection? I was hoping to get answers to these questions before wasting money buying unnecessary adapters.
Thanks

The BEST way to do this is to go to radio shack and buy two (yes 2) of their?XLR to /4" Impedence Matching Transformers, AND?one (yes )?dual /4" female TS (tip-sleeve) to single /4" male TRS (tip-ring-sleeve) "Y" cable. Unless your mixer also has /4" main outs as well as the XLR... then you can just use the Y cable and skip the transformers. Or you can use a /8" Y cable with the transformers (and stereo /4 to stereo /8 adapter) and go into the card's line in jack on the actual card. Which is how I did it for a year or more untill i got a firewire recording interface (and it worked darn good too with my Soundcraft mixer and some good microphones). Either way,?you need the transformers for optimal results. The reason is the mixer's output impedence and level doesnt match that of the soundcard's input... mixer will likely overdri've the card, or the signal will sound weak or noisy.. The transformers?are cheap and are darn handy for loads of recording functions, and will provide the Audigy with exactly the type of signal it needs, properly transformed from the mixer. If you do this, you can record ALL of the mixer channels IN STEREO with all the panning, effects, and levels preserved. If you have multitracking software like Cubase or similar, you can even record an individual instrument (or even 2 at once, one panned left, one right... each assigned its own track in your software), come back on a new track (or pair of tracks), and record a different instrumet (or 2) and build a multitrack recording one performance at a time. PS:? you CANNOT just hardwire the mixer outputs and combine them into a single channel. A mixer is needed to properly combine?signals. Don't do it
!!! Have fun... and rock on.PSS:? make sure your overall cable is as short as possible. If you must run it for more than 6 feet then run it in XLR mode and convert it very close to the computer. The non XLR section of cable is an antenna for noise. The XLR section will be shielded against noise. Also, the transformers are kinda heavy so do not plug them into somthing and allow them to hang in the plug becasue the hanging weight will ruin your jack. Its best to run cables to the transformers, allowing them to lay on the floor... in a safe place where they wont get stomped on.
Message Edited by ElectricUrinal on -28-200708:0 AM

FAQ Comment on Audigy 2 Platinum Solution ID 1

First, I didn't see where else to put this. So...
I was experiencing noise and hiss problems with my 2400+, Audigy 2 Platinum card. Every time I moved the cursor, especially when editing sound files on on IE, there was a high pitched squeal which accompanied mouse movement. The FAQ suggested to completely uninstall the board, software, and drivers. With a bit of "hmm, can't do that and the like" the FAQ corrected the problem.
The FAQ however needs a bit of updating under the XP cleansweep:
. Step 6: The A2P has the setup.exe, same as the X-Fi card, but what it does not have is the Creative Driver Utility Update. Perhaps this is under a driver update but trying to make sense out of those is difficult.
2 Selecting the "Rate Solution" is limited to 300 characters even though you can type more. So I guess this is the right place for FAQ comments.
Thanks for the help.

Seems that nobody else has had this problem yet. In the meantime i have found out that just one channel is full of noise. Even under Ubuntu i have this noise so it's definitely the hardware. Must be something damaged indeed. the point is that i would like to know how can i avoid to happen this once again. In the last 25 years i am dealing with RCA Audio i connected the devices always not powering them off before. Seems that the problem is here. It could have shortcutted something inside the I/O box.

EAX console on audigy 2 platinum

Hi all i just reformated and installed all the updated drivers for my audigy 2 platinum but now i dont have the EAX console with the mixer and the calibration tool. there is no icon in the desktop tray and when i tried to install the EAX console it says im missing required software and it exits.
Im on windows xp, i hope creative didnt get rid of all that right now i just have "creative audio console" and it doesnt have an EQ or bass/trebble settings. What should i do?

I have the same problem on Windows 7 - 64bit...and before also on windows xp 32bit...
I have installed all the drivers and all the utilities.
who can help us?

Audigy 2 ZX Platinum + Audig

Similar Messages

Maybe you are looking for