Audigy 2zs Gamer and Windows Vista / Windows 7

.Audigy 2zs Gamer and Windows Vista / Windows 7? Hello, I am just wondering if it is a known issue to have really loud static and crackling when playing games using this card in Vista or Windows 7. I had this issue playing Bioshock a few months back on my Vista boot. I never figured out a way to resolve it so I belei've I just eventually uninstalled the driver and used the card without a driver install (not sure but I think this what I did). It worked but I might as well of just ran onboard sound...
Now I have installed and tried to run Windows 7 on a dual boot but I started receiving really loud cracking and popping in Warhammer Online and realized I had not installed a driver for my sound card. I did not expect creative to have a Win 7 driver yet but thought perhaps the Vista driver would work in compatibility mode, it does and sounds awesome and really makes me remember what I am missing without my driver installed on Vista but unfortunatly it randomly starts the crackling and popping again after a while...especially when a lot start happening on screen (pvp raids with many characters on screen and magic effects).
When the crackling starts happening I have no choice but to exit the game and restart the computer to get rid of the noise, but randomly it comes back after a while during gameplay. So as a temporary solution I have installed my onboard sound drivers and have been using that for sound output and my mic port on my sound card for my microphone. I would REALLY love to get my sound issues worked out in both Vista and Win 7 because it sounds SOOO awesome while it's working, the popping though is terrible, I never had that issue in XP.
I know this is an older card but any help would be appreciated!?
Message Edited by grimdeath9740 on 0-4-2009 2:3 PM@
68.95.29.2

One thing you do need to learn is that SHOUTING IS MUCH HARDER TO READ!
But, if you are using Audition 1 and it works with XP, then if you have the chance, I'd stick to that on a new machine. Apart from anything else, it's completely untried with Windows7 and with Vista its a) likely to have problems, and b) going to run slower.
The other part of your question about the 'look' of later versions is that 1.5 looks pretty similar to 1.0, but with 2.0 and 3.0 things have changed somewhat - rather more with Multitrack View than Edit View. Basic operating principle remains the same, though - most people have had very little trouble transferring from one to another.

Similar Messages

Want to connect Audigy 2zs gamer with digital so

Ok I have the audigy 2zs gamer, and the gigaworks 750 7. surround sound.
I also have hdtv cable box with digital out, and optical digital out.
I have ps3 (obviously with blu-ray) and xbox 360, both of which have a optical digital out.
I want to be able to connect to these, but I guess the only inputs ( on pod, and on card) are analog only.
My question is. Is there any way to do this. I see a digital i/o box, but I don't think it's compatible. It says it is with the value model, but not the regular 2zs gamer one?
So do I have to buy a newer sound card, or can I use this one as is, or with the digital i/o box to make it work.
I don't care about having multiple connections, I can make do with having only connected at a time.
Thank You

I guess what can solve one of the problems is.
If I use a digital out (4 pin minipole connecter) from my cable box to the line in of the 2zs board, will it accept it...or is the line in for the 2zs analog only?

Disabling SMB2 and SMB3 Client from Windows Vista, Windows 7 and Windows 8.

There are many programs that are using a shared file on the server from clients from XP to Windows 10. From time to time it seems like there is a network outage and the handle to the file is broken and the file
cannot be read or updated. It seems more prevalent on a Windows 2012 server but may have happened from time to time on 2008 & 2008 R2. However there are not any network problems so it just leaves the server & Client
I have searched for possible resolutions including:-
Turning off the Cache for the share
Disabling the network adapter power setting to allow windows to put the device to sleep.
Disabling Antivirus/configuring it to ignore folders for on access scanning
Disabling SMB Signing
Configuring the clients DWORD registry value SilentForcedAutoReconnect=1 in HKEY_LOCAL_MACHINE\Software\Microsoft\CurrentVersion\NetCache
Setting the "NET CONFIG SERVER /AUTODISCONNECT:-1" to not drop client
connections
The last bit of trouble shooting that I can think of is to disable SMB2 and SMB3 as that does a lot of caching and batching of packets which could also be the cause of the problem.
I have looked at
http://support.microsoft.com/kb/2696547/en-us
I have disabled SMB2&3 on the server as that is very straight forward.
When I get to the section about disabling SMB2 on the client the command fails.
sc config
lanmanworkstation depend= bowser/mrxsmb10/nsi
  After running the above command, it returns an error:
      [SC] ChangeServiceConfig FAILED 1059:
      Circular Service Dependency was specified.
So it's not worth running the following command:
sc config mrxsmb20 start= disabled
I have tried the command on Windows Vista, Windows 7 and Windows 10 just to confirm that it's nothing to do with any particular PC, machines in Domains and Non-Domain machines.
So, my questions are:-
1, is
http://support.microsoft.com/kb/2696547/en-us actually correct and up to date and for the OSes (Vista, 7, 8, 8.1, 2012 server and Windows 10) with latest updates & service packs?
2, How do I disable SMB2 and SMB3 on clients for troubleshooting purposes the server to resolve problems with shared files (multi user access)
3, If I just disable SMB2 & 3 from the server would that force the clients not to use SMB2 when communicating with the server and therefore not caching the directory structure and file not found etc? I have seen posts that suggest this is not the case.
4. Does sc.exe have a bug in it?
Thanks in advance
Rob

Hi,
I made a test in our testing enviroment, everything works fine to disable SMB2 and 3. For your problem, in my opinion, as I didn't find any specific report about this error, it would be better to use Process Monitor to capture the trace when running the
command.
Start Process Monitor, then set the filter as cmd.exe, after that, open CMD and execute the command.
Process Monitor:
http://technet.microsoft.com/en-us/sysinternals/bb896645.aspx
In addition, I found another thread that had similar error with yours, you can take its solution as reference.
https://social.technet.microsoft.com/Forums/windows/en-US/506828c8-e7af-4039-aca7-43321939bb55/offline-files-synchronization-error-the-file-specified-cannot-be-found?forum=w7itpronetworking
Roger Lu
TechNet Community Support
Roger,
Many thanks for the time taken to look into this.
I've downloaded process monitor and loaded it. I filtered for cmd.exe started capture and saved a 1mb file.
However I don't think this is going to help unless you can point me in the direction of what you're expecting to see in the capture file? If you want me to send you it I can but it does contain personal information which I'd rather not place online.
You can recreate the problem yourself by doing the following:
Go to modern.ie
Download any windows 7 virtual machine for your preferred of virtualisation platform
log in, start cmd as administrator and run the command
sc.exe config lanmanworkstation depend= bowser/mrxsmb10/nsi
You will also receive the same error.
[SC] ChangeServiceConfig FAILED 1059:
Circular Service Dependency was specified.
You can also try it on the Windows 8 and 8.1 machine if you have time.
I checked the link to the similar error and that just looks at the file not found problem which is the smb2 cache. They still didn't resolve the slow access to the share which is seen on a machine that has anti-virus on it when you go to right click
on the folder or a file in the folder. It's about a 20 second (spinning circle) pause every time. The problem is bigger than that. If you have shared files on the network share that are used by multiple people at the same time, say a spreadsheet or database
file windows is loosing the connection to that file so the user cannot write to it even if they have the file open. The smb2 caching shouldn't cause that problem.
It appears that I have to disable from SMB2 and SMB3 and ensure that the clients only use SMB1.
If SMB2 & SMB3 are disabled from the lanmanworkstation service the clients will not do any caching even if the server has disabled the share cache (offline files for that share).
The problem with the "Circular reference" error message is standard across all versions of windows that have "smb2" or "smb2 and smb3". Can you recreate that problem? Or is it working on your windows computer and on the machines
downloaded from modern.ie ?
My testing has shown that the command "sc.exe config lanmanworkstation depend= bowser/mrxsmb10/nsi" does not work. Therefore that's the one I want to resolve first. By resolving that I may be able to get the clients accessing the share to behave
themselves and use the shared files correctly as they always did from Windows 95/NT4 through to Windows XP and 2003/2008 server.
I'm unable to recreate the problem with multiple users having access to shared database files on windows 2012 server from Windows 7 clients were the access to the files drops once a day or once every couple of days.
Kindest Regards
Robert

BDB support for Windows Vista, WIndows 7 and Windows Server?

Hello,
I examine to use BDB on Windows, and I have a question.
There's a description about supported OSs on the BDB reference guide as follows;
Where does Berkeley DB run?
The Berkeley DB distribution includes support for Windows/95, Windows/98, Windows/NT, Windows/2000 and Windows/XP, via the Microsoft Visual C++ 6.0 and .NET development environments.
Does BDB distribution supports for Windows Vista and Windows Server 2003?
And it will support Windows Server 2008 and Windows 7?
I believe that BDB does not depend on specific function of Windows, thus there's no problem to support them...
Regards,
Akira

Yes, we have a plan about BDB support for Windows Vista, Windows 7 and Windows Server. Once we are ready, we'll let you know here.
Hi Vit,
For Berkeley DB XML questions, please go to the Berkeley DB XML forum at: Berkeley DB XML
By the way, I learnt there's a XP-compatible mode in Windows 7. You may want to try DB-XML with that.
Best regards,
Chao Huang
Oracle Berkeley DB

Firefox is loading pages very slowly, most of times saying server not found. Same pages loaded quickly in ie9. Previously FF used to load pages fast. FF version 8.0.1, windows vista & windows XP.

firefox is loading pages very slowly, most of times saying server not found. Same pages loaded quickly in ie9. Previously FF used to load pages fast.
FF version 8.0.1, windows vista & windows XP.
Please help
Generally we dont get any reply to the questions asked here!

65kid wrote:https://bbs.archlinux.org/viewtopic.php?id=162327
Thank you for the link, but I am not sure how this is going to help me: I am not booting straight to an X session, but prefer to log into TTY1 and have my login shell handle everything from there.
Here is the relevant part of my .zprofile:
if (( UID )); then
[[ -z $DISPLAY && $XDG_VTNR -eq 1 ]] && exec systemd --user
fi
As far as I understand, your method works if I enable the [email protected] template when actually booting straight to X.

Which register cleaner or tune up software is the best to use for windows vista,windows 7 and windows 8.1 as professional?

hi,
I like to know wich register cleaner or tune up software is the best to use for windows vista- windows7- and windows 8.1.
I like to know the proffesional version of it which I can use for my clients every where unlimitted to clean unwanted keys of registry and improve performance.(specialy in Dutch language).
thanks
johan
h.david

I second what Kate Li said. There's no need for a registry cleaner! Don't do it! I run Windows systems for years and they keep running as light and fast as when they're new.
What I *do* recommend is regularly reviewing the list of programs set to run in the background using a tool to show you what starts in various ways called Autoruns, which can be found here:
http://technet.microsoft.com/en-us/sysinternals/bb963902.aspx
This tool can be used to disable things you don't need.
-Noel
Detailed how-to in my eBooks:
Configure The Windows 7 "To Work" Options
Configure The Windows 8 "To Work" Options

Audigy 2ZS Platinum Pro in Vista x64: "Skipping" (Distortion) when record

Hi! I've just setup Vista x64 and installed the latest Drivers for my Audigy 2ZS Platinum Pro. Besides the fact that there's no software available for convenient control of the features of my soundcard (Surround Mixer, Speaker Settings, THX Console etc.), everything is fine for playback (after adjusting the bass and treble-sliders to their 0dB-Position!). But I've got a massive problem when recording audio, or when using the microphone: I can play back sound from any source without distortion, but when recording it or using the microphone for VoIP-Applications like Skype, Teamspeak or In-game communication, I get a constant "skipping" distortion like the clicking when a CD is defective and skips.
It sounds like short disruptions which come at regular, very short intervals (approx. 0 per second or so). This effect is always present, irrespective of the load situation of the system and does not change with it. In XP32, my Audigy 2ZS still works like a charme. Furthermore, I've got a "PCI Input Device" in Device Manager with a question mark, although the Firewire-Port does work. Could this be the Gameport not beeing recognised But that's not nearly as problematic as the flaw from above... Thanks in advance for your advice!

I'd like to also add that I have been observing this same problem for quite some time now. While I do not frequently have a need to record, that is changing now and I would rather not have to reboot to Windows XP in order to have functional recording capabilities.
I am currently running a dual-boot configuration of Windows XP/SP2 and Windows Vista Ultimate 64-Bit/SP, with the Audigy 2 ZS Platinum soundcard, and the latest drivers available for the card as of today's date (0/7/2008).
A clip of audio to illustrate the problem may be heard by saving and playing the MP3 file found at http://ambress.com/audigy/audio_recording_fault.mp3. The following graphic also illustrates how the sound is like a series of recorded pulses, making recording completely useless.
I would greatly appreciate any feedback confirming this problem by Creative and what solution is available or when one is to be expected. If a solution is known by any users that perhaps I have missed in searching the forum, of course I'd be grateful for that help as well.
Thank you,
Daryl
Message Edited by Ambress on 10-26-2008 11:43 PM

Mac mini, boot camp, windows vista/windows 7, DVI to HDMI, no display

I have a mac mini from 2008 on which I have put windows Vista via boot camp. I have connected the mini using DVI to HDMI, to my Sony Bravia 1080p HDTV.
When I log into the mac 10.6.2, all seems fine and I can see the display alright.
When I log into Windows Vista, I cannot. The display stays black even though I hear the Windows startup sound.
I tried force-upgrading to Windows 7 and the same thing. In fact at some point I can see some of the stuff (like when starting in safe mode), but as soon as it boots up, the display goes blank.
Normally I can see the display up to the point where it says loading Microsoft windows (with the small progress bar) and then, nothing.
Any clues what may be happening?

No response

Windows Vista/Windows 7

I currently am running Windows Vista. I need Windows 7 Is there a free basic version?

I've installed all vista updates and the other day installed the new version of itunes 7.3 and now i can transfer all info to ipod. However, I have now just been attempting to burn an imported disc and during the intializing period it pops the blanks disc out and says an unknown error occured(2131). Any ideas

Hot Sync with Windows Vista, Windows 7`

I have a client with a large deployment of Palm III and Palm IIIc devices. They are looking for a HotSync Manager that is compatible with Windows Vista and Windows 7, and that will still support sync operations with Palm III and Palm IIIc devices.

http://forums.palm.com/t5/Windows-HotSync/Windows-7-and-Vista-hotsync-instructions-here/td-p/251755/...
WyreNut
I am a Volunteer here, not employed by HP.
You too can become an HP Expert! Details HERE!
If my post has helped you, click the Kudos Thumbs up!
If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked!

PC Games and peripherals on Windows 7 on Lion on mid-2011 iMac. Possible?

Sorry for the long marquee, but I want to get anecdotal-experience answers on this convoluted subject before I waste a couple months of my fairly-rapidly-closing life --carpe diem. all y'all -- on something that's doomed from the very start.
For reasons I can't quite fathom (relative installed population, maybe), there are very few racing sims -- none, as far as I'm concerned -- for the Mac. That's most def not true for the PC -- I've been a Mac-only user since 1989, but the PC has always been -- when working -- a pretty good gaming platform (ALL it's good for AFAIC), with tons of titles, and the ability to accomodate multi, MULTI-axis controllers, like force-feedback steering wheels with gas, brake, and clutch pedals, and gearshift. I know of nothing like that for the Mac, even if there were racing sims that would run on a Mac.
So here's what I need to know: if I had a Boot Camp partition on my home drive (Macintosh HD), with a 32-bit or 64-bit (full version) of Windows 7 Home Premium, Windows 7 Professional, or Windows 7 Ultimate (necessary for my Mid-2011 27" iMac running Lion or above) installed on that partition, could I then install PC racing sims on that Boot Camp Windows 7-whatever Platform, and be able to use multi-axis controllers, like a Thrustmaster wheel, pedal, and shifter set?
Please, if anyone has been able to do this, by whatever means, on a mid-2011 iMac running OS X 10.7.x or above, I'd be eternally grateful if you could share your experience.
Thanks!
Bart

Seeing as how there are about 117 different versions of 64-bit Windows 7 out there, is there any particular version that is more advantageous -- in the case of Microsoft products, that means less bug-ridden -- for use on Boot Camp? I've seen reasonably priced ($66) versions like this:
"Microsoft Windows 7 Home Premium 64-bit FULL - BRANDED"
But then the description consists of this mangled English:
"This product will be branded HP, Dell, etc. but will do a FULL install on any brand computer and includes a DVD and COA. This is only unique to branded? [sic -- BB] OEM Windows products and not to non branded OEM Windows products. If you are the person people always seem to ask for help when their computer isnt right you should be fine with this. If you are not that kind of user you may want to stick to a non branded oem. Once again this only applies to Mac users [really sic -- BB]."
This is the only part of the description on this product page that even mentions "Mac users," and I'm left wondering if this "FULL - BRANDED" 64-bit version of Windows 7 will work OK on a Boot Camp partition on an OS X 10.7.x -- 10.8.x iMac.
Knowing all too well what a rat's-nest Windows has been since it was first foisted upon an unsuspecting public in 1985, with security problems that, after nearly 30 years, have still not been addressed, I want a 64-bit version of Win 7 that's going to give me the least amount of grief on my Boot Camp partition.
As this thread seems to be pretty much a dead letter, as many discussion threads become after an answer is provided, should I create a new question titled:
"Which 64-bit version of Windows 7 will work best on a Boot Camp partition on an OS X 10.7.x -- 10.8.x iMac?"
Thanks again!
Bart

Can i install programs such as qq game and pps on windows 7 once i've installed on a imac

i want to buy a imac 2011, if i do buy it and install windows 7 on it, can i install programs such as qq and pps

Anything you can use on a windows computer will work on a mac with windows 7 installed on it.

Ipod Nano 4th Gen not recognised in Windows Vista, Windows 7 or Itunes and screen blank

Hello,
I have a quite old (3-4 years old) iPod Nano 4th Gen.
The screen is blank, which means it needs charging. When I plug it into my laptop/computer then it doesn't show up which im assuming is because it needs charging.
When I plug it into my plug charger (plugged into a wall) nothing happens.
I think this is because the cables (I have 3- 2 computer USB cables and one plug charger cable) being too lose and not connecting to the iPhone fully.
I have looked at all the articles, I have done the R's, I have tried to restore it, I have pressed the clickwheel and centre button together and I have toggled the hold switch.
If anyone can help it would be appreciated! (And please save the "take it to apple support" etc... comments for if you can't think of anything else- not being rude but I know this)
Thanks
BitMyApple

Hey, I hear ya and can sympathize. I have the same
issue. The difference is that my computer can "see"
my ipod but it refuses to show up in itunes itself;
therefore, I can't put anything on the ipod (from the
computer) and vice-versa. Apple support is clueless.
This is very frustrating to say the least. Itunes
keeps telling me that my ipod is synced to a
"different" computer, which isn't true. It's the
same computer. The difference is that when I first
got the 'pod and used it with this computer (and
everything worked fine), I was running XP. I
installed Vista and after that, all the problems
started. If I ever get this resolved, believe me,
I'll post something here.
I'm guessing that somehow, itunes "sees" what
computer it's hooked to by "looking" at something in
the OS. Change the OS and it "thinks" it's seeing a
"different" computer.
Try reformatting it.

Flex launching error on Windows Vista (Windows No Disk - exception ....

Hi guys, I downloaded the flex builder from adobe, I install the application but when I'am trying to lauch my application I get the error
Windows - No Disk ... exception processing message 0xc0000013
I reinstall adobe flash and my java runtime, I still get the same error, I can create an application but I can't execute it, that's sucks!
I check on adobe in the faq for flex, they say that error occurs when you install the application from a DVD, that's not true, I downloaded from their site....
thanks
Alex

Ok guys, I found it myself, very strange!
I just change my default workspace to another one, I got the same problem then I just put back the default workspace and the problem was resolved!
Alex

Can't Install iTunes 10.6.3 Windows Vista Windows Installer Problem

Basically, just before installation completes a popup of "There is a problem with this Windows InstWhat exactly would I be missing??? please help !aller package. A program required for this install to complete could not be run.". I've read many threads that state that all I have to do is run a repair on the Apple Software Update(ASU) but my problem is that I've already uninstalled it. Now what comes to my mind is that, it wasn't a clean uninstall as I just uninstalled through Add & Remove.
So I would preferably like to get an answer to the whole problem or if not what files are linked to the ASU that might cause this problem. Please help I've alot of things and I really hope there is another solution then to reformat my PC, I really don't wanna reformat my laptop just for iTunes and because I have an iPhone, I unfortunately, have to depend on having it installed.
Back story (Why I do not have ASU):
When I updated my iTunes and several other Apple software, I was unable to start itunes, kept getting a permissions issue. So I set all the permissions to my User Account (note that I am, from the start, using an admin account) but still errors kept popping up. Usually when an update doesn't work I just go through Add & Remove and uninstall all Apple programs before trying to reinstall iTunes and etc, which I did, Except this time...

Download and save a full itunessetup.exe or itunessetup64.exe file(depends on your operating system).
http://www.apple.com/itunes/download/
Use Winrar to unzip the file into a folder. Then right mouse click the file AppleSoftwareUpdate.msi from that folder to install.
If you don't have winrar, you can go to this link to download a free trial version.
http://download.cnet.com/WinRAR-64-bit/3000-2250_4-10965579.html?tag=dropDownFor m;pop

Audigy 2zs Gamer and Windows Vista / Windows 7

Similar Messages

Maybe you are looking for