Audigy 2ZS How to output same sound quality on rear and fro

Hello,
i am having following problem: I have the audigy 2 zs and a teufel concept e 5. surround system.
i use bpm studio to mix music. in this program i can assign the two players/turntables to the different output channel, so i am able to have seperate channels for output with only one soundcard (left player front output, right player rear output.
the thing is, that to me it seems that the sound quality is different between front and rear. this also occurs when i output something with winamp, it sounds different in the front and in the rear. how is it possbile to achieve the same quality output with the same frequencies and the same volume level on both front and rear. i hope that the question is understandable.
thanks in advance,
mirza hujdur

I've experienced this before. I have read about it somewhere, but I can't remember the exact details and now I forgot where I saw it :angry:. I think that it is the amps in your speaker system and it has something to do with the front amps needing to be more robust than the rear. So the rear speakers sound slightly clearer. Is that what you are experiencing? You can check whether it is the soundcard by swapping the front/rear channels around. If it is the speakers, the difference in quality will remain unchanged.
Message Edited by pjc on 02-25-2005 08:48 PM

Similar Messages

When i put my bounced track to CDJ 900, the sound quality drops, Hi and Mid Pass sound like they "Shrink In", doesn't sound the same when playback in logic. I set my bouncing setup as highest.

when i put my bounced track to CDJ 900, the sound quality drops, Hi and Mid Pass sound like they "Shrink In", doesn't sound the same when playback in logic. I set my bouncing setup as highest.

Hi Eriksimon,
Firstly, thanks for your message.
What I meant by "hi pass mid pass shrinking in" is EXACTLY what you menat, I got a heavy bass and muffed high and mid content. Apologised for my poor English.
I haven't checked the setting of the playback device yet but instead I tested it with some professional produced tracks. I know the sound tends to vary a little bit when playing from computer and CD player such as the CDJ 900 that I am using. The differences were not as significant as my own track. They tend to get a rather good balance. My track is well balanced and mixed (I guess) in Logic but it turns out completely different when using the CD player.
I bounced my work to MP3 with highest BIte Rate.

I play music on my hi fi via an airport express attached to my iMac. Since installing maverick the sound quality is terrible and I get frequent distortion, which never happened before. I have reset the airport express and reconfigure my wireless settings.

I play music on my hi fi via an airport express attached to my iMac.
Since installing maverick the sound quality is terrible and I get frequent distortion, which never happened before.
I have reset the airport express and reconfigure my wireless settings. I have also used Ethernet on its own but still get the same sound problems.
I would love to turn itunes sound off as you used to be able to do, but this I believe can't be done.
Has anyone else been having the same types of problem, and better still has anyone got the answer?

When the AirPort Express Base Station (AX) is connected by Ethernet, you will find an option in the AirPort Utility, labeled: Enable AirTunes over Ethernet on the Music pane. Just select this option to allow streaming iTunes via the AirPort's Ethernet port. You should also be able to disable the AX's wireless so that it shouldn't interfere with the nearby TC.

How do I improve sound quality when the sync property is set to "stream"

I recently had a problem with timing text with sound (narrator). For example, when a user tapped a button a narrator would read text on the page and the words would highlight as the narrator read the words. The problem I ran into was that it performed well on the desk top but the timing was off on some mobile devices. So I set the sync to "stream" and it worked fine. But I ran into another problem; the sound quality went down, sounding muffled.
How can I make the sound quality better when the sync property is set to "Stream"?

you can control streaming sound quality in your publish settings which can override the sound quality settings that you can set by clicking the library sound's properties (right click/properties).

How can I adjust sound quality?

I'd like to be able to adjust the sound quality when using EyeTV or when I play movies on Mplayer or VLC. Is there a way to adjust the sound on an eMac?

Hi, Chops,
Thanks. I upgraded to the latest version of VLC and that solves my major problem, getting an equalizer to keep movie explosions from knocking me out of my chair while but forcing me to read lips to find out what characters are saying.
I use Harman/Kardon Soundsticks and Subwoofer.
Since you seem to know something about this and I don't, would you happen to know if someone has written an application which would add an equalizer to the eMac itself? It would be majorly cool to be able to adjust the sound output in general.
Thanks again for your help.
Troy

How to output surround sound with airport express N

is this possible? I am streaming successfully with airport express, sounds great with no audio dropouts. I have it hardwired to my router and the AX is connected optical to my surround receiver. Music is only played through my fronts. Is there a way to output surround sound? I can't even choose different audio options through my A/V receiver.

I Found out the problem. When I was hooking everything up, I kept the t.v. on so I can assign audio inputs with the onscreen display. If the T.V. is left on....only stereo outputted. When I turned the t.v. off and with the airport express plugged into AUX, I was able to switch between surround sound settings.
so the moral of the story is, turn off video devices when you just want sound, especially if they are hooked up to the AVR with HDMI.

Poor sound quality in timeline and export; fine in Source?

Hello all.
Newbie to Pr but experienced pro in digital audio. I'm stumped and know I'm just missing something somewhere.
I've made a music video for one of my songs. The graphics are all done (in AE), imported to Pr and eveything looks great. I import the final mix of the audio and it sounds very low quality when played from the timeline and in the final output, regardless of format (I've tried several presets and custom settings as well). I played around and noticed that the audio sounds fine when played from the Source window inside Premier.
The Pr session is comrised of 18 video tracks (not all playing at once, of course) and one stereo audio track.
I've tried re-exporting the audio from Logic at different bit depths, sample rates and file formats (mp3, wav, AAC, etc) but the results are the same every time: Source (Pr)sounds fine, Logic output sounds fine, rendered / timeline playback sounds like very low quality mp3 and final product sounds just as bad.
I've tried everything I can think of. I hope one of you can show me what I'm missing.
TIA!
Mark
Premier Pro CC
Processor 2 x 2.8 GHz Quad-Core Intel Xeon
Memory 8 GB 800 MHz DDR2 FB-DIMM
Graphics ATI Radeon HD 2600 XT 256 MB
Software OS X 10.9.1 (13B42)

Thank you for the reply!
I was experiencing the same results no matter what export settings I used. Plus the poor sound quality was present in the timeline itself, without even exporting the project.
I finally threw my hands up, started a completely new project, drug the same audio file in... sounded fine. Copied / Pasted the video clips from the original, broken project and boom, eveything is fixed. Yeah, corrupted Pr file it turns out. All I had to do was start a new project and import all the old components.
I've had to do this in Logic a lot (increasingly, these days). I just wish I'd tried it 10 hours earlier! Ha.
Anyway, problem solved, and thanks very much!

How can i get sound on BOTH imac and apple tv

The sound works fine on the apple tv Television but goes off on the iMac
Video works on both, so How do I get sound on Both when mirroring?

Go to Settings > Messages > Receive At. Use the same Apple ID. Make sure the phone numbers/email addresses you want to receive messages at are checked.

Poor sound quality on airtunes and airport express

I recently configured a new Airport Extreme base station and two airport expresses. I used the airport expresses to extend my network but the sound quality is very poor when I run itunes no my stero. can anyone tell me why and how to fix it. The sound is very scratchy and there is no volume.
Rich

Dear All,
I'd like to follow up because I think that the answer to why I am getting poor sound quality my be in how I set up my wireless network. I'd like to get some feedback about this and some help about how to correct it.
My wireless network has three components.
1. "Base Station" which is a new Airport Extreme.
2. Unit "Number 1" which is an Airport Express located in my living room and connected to my stereo. it is 30 feet away from the "Base Station."
3. Unit "Number 2", also an Airport Express that is upstairs in a bedroom and connected to a ruby imac. via its ethernet port.
Wireless strength is excellent in all locations and all other services are working well from a laptop, the ruby mac or the imac. My problem only seems readily apparent when playing itunes through the stereo's speakers.
My wireless system is configured as follows:
Base Station: Wireless mode is set to participate in wireless network and to allow this network to be extended. The WDS mode is main and is set to allow wireless clients. The two airport expresses are identified by ID number as remotes.
Unit 1 and 2 are configured as WDS remotes and to allow wireless clients and identify the base station as WDS main.
I recently configured a new Airport Extreme base
station and two airport expresses. I used the
airport expresses to extend my network but the sound
quality is very poor when I run itunes no my stero.
can anyone tell me why and how to fix it. The sound
is very scratchy and there is no volume.
Rich

Poor sound quality on ipod and G4

The last three albums i have downloaded from itunes music store have poor sound quality. On both my G4 and my ipod the songs have a lot of noise. They sound as though the speakers are blown, or the eq is maxed. All my songs prior to these last three downloads sound fine on the same speakers and headphones.
Am i nuts?
Marc Cohn and St John's Childrens Choir are the last two albums i have downloaded.

? well idk what theyre talking about but i just got a new 160 GB classic 3 days ago and ive been perfectly happy with it and my music is only encoded at around 160, some down to 92 VBR! (saves disk space) and i work with music everyday as a listener, player, and engineer.

Output same Deski report as PDF and XLS

Hello,
will it be possible to generate (not schedule) a Deski - Report using Java SDK ?
desired workflow:
- generate/refresh the report to hold new data (User specific, Local specific)
- output this report in Formats PDF and XLS
- store the output - reports in Users inbox
The goal is to generate the report only once and output the same twice - as pdf and as xls.
As far as i saw in scheduling a report, it is only possible to produce one output (pdf or xls), if we need both, we have to schedule twice. And therefor we will have to generate the same report twice.
I found somthing like
binaryView = (BinaryView)documentInstance.getView(OutputFormatType.XLS);
binaryView = (BinaryView)documentInstance.getView(OutputFormatType.PDF);
in RBean for Webi - reports.
Looking forward for any idea.
Thanks in advance.
Johannes
Edited by: Johannes Kammerer on Sep 15, 2009 4:55 PM

If you're on XI 3.x, then you can specify multi-format exports using Publications.
Otherwise, you'd need to export to a file using REBean SDK, then Enterprise SDK to create a new InfoObject for that artifact.
Sincerely,
Ted Ueda

How to use same form for Editing info and creating info.

Hi all,
Here my aim is to select the user from list and edit the user info. There is one more option to create the new user.
Currently I am using two separate input forms one for Editing and one more creating new user.
Can anyone tel me, how to use the same form for both editing and creating.
Thanks,
Ramesh Biradar

Hi Ramesh,
I'll make some assumptions about how you're going about this, and then give you a possible solution:
I assume that you have a table with selection on one page. To edit an item, you wish to select it's radio button and click an edit button to take you to another page with the item filled in to edit it. To create a new item, you'd like to click a "new" button and go to the same page.
If this is correct, here's the basic steps:
1). Assuming you have both the list and edit pages already created, make sure you have a JSF navigation case defined going from the list page to the edit page. I'll call this navigation case "goToEditPage" for this discussion.
2). To make the edit button, drag a command button from the component palette and drop it on the af:TableSelectOne (the column in your table containing the radio buttons for selection).
3). Set the action property on this command button to "goToEditPage".
4). Now, to make the create button, drag a command button from the component palette somewhere on the page. I like to put mine in a panelButtonBar inside the actions facet of an af:Page component.
5). Now, for the Action property of this command button, bind it to a method in your page's backing bean. The code will look something like this:
public String performNew()
    BindingContainer bindings = getBindings();
    OperationBinding operationBinding = bindings.getOperationBinding("Create");
    Object result = operationBinding.execute();
    if (!operationBinding.getErrors().isEmpty())
      return null;
    return "goToEditPage";
}Hope this is helpful, Ramesh.
Regards,
John

How can I match sound quality between video clips and audio clips?

Hi guys,
First of all let me say that I enjoy using the latest Media Encoder. However, as a novice, I have two related problems.
1.I am recording video to use with PowerPoint slides in Adobe Captivate. I am encoding the video with best quality FLV. This produces very good video,
      but with a degraded audio track, even though I had filtered the audio in soundbooth. The post encoding sounds like it did before Soundbooth corrections.
2. Some of the video recording has been set cut into audio clips to be used as background narration behind PowerPoint. The logic behind this is: that if both are
      recorded at the same time, the voice quality should match.
This is far from the outcome. I have tried MP3 for the audio which of course produced the best sound- but is entirely unlike the rest of the video. I have also encoded the audio with Windows Waveform preset figuring that since the soundbooth edit was a .wav file, that there should be a reasonable match. Wrong again!
So, the audio quality of all clips is poor, and the difference between the encoded video clips, and the audio encoded clips spoils the otherwise professional result in Captivate.
Please help, all of you experts.

Thank you.
OS Windows 7 x 64; 3.2 MHz; 2 TB; 12 GB Ram-9GB ram allocated to Adobe.
My process is this:
1. The whole video and audio narration material is shot in one continuous video sesseion.
2. The microphone is only mono, but the camera is set to stereo. Noone can work out how to change the camera to mono.
3. In Premiere Pro 5, I select render and replace in SoundBooth.
4. In Soundbooth, I choose Add Multichannels.
5. In Multichannels, I delete the unwanted noisy channel, and any other unused channels.
6. With the remaining mono channel, I then select Export and Save As option, then Stereo.
7. Next I edit the stereo channels as needed.
8. The imported stereo won't automatically update in Premiere Pro, so in PPR I import the new edited stereo track.
9. I test this track in PPR, to check that it is playing R & L channels. It is. OK.
10 On the timeline, I proceed to cut apart this single stereo wavelength .
11.These clips are saved as Video, or Audio subclips.
12 From the video subclips, I export to Media Encoder, and choose either FLV4 match attributes (High Q). This I modify to custom 2 pass (Custom save).
     The summary says that this is saved to MP3 Stereo.
13. I import this into Captivate 5, but the Video outcome is Left channel only. I have tested this on Media Player/Real Player where it is also L channel only.
14. I export my Audio subclips to Media player, and select MP3 option and this summary also reports stereo. The Audio outcome is stereo, when played in any player and in Captivate 5.
I cannot understand how a single, continuous track edited uniformly in Soundbooth to stereo, can produce different outcomes in Media player.
I would so appreciate a solution to this problem, because, in the Captivate 5 e-learning production, the switch between stereo audio (behind PowerPoints), and l. channel video is distracting. Naturally, the l. channel only is a thin sound. It is as if it had never been edited in SoundBooth at all.

How to get your sound quality great in Vi

Guys,
Ive installed vista64 since i did a major upgrade along with my X-FI Gamer Fatality Soundcard, i always thought it dont sound great at all.
Ive just figured out why, in the sound options of the control panel where you can select the quality of sound always select 48hz studio quality dont go for the 96hz studio quality.
Do this in all the sound settings for each device and then tailor it to 5. or stereo which every you prefer, then goto the creative console and match it eg 5., stereo etc.
If needed test the channels and see how nice it sounds. as you will notice so long as you have a decent setup it will sound more fuller in apps and games.
I was using 96hz studio quality and always thought why it sounded so flat but as soon as i changed it to 48hz studio quality its sounding like i was using XP again, wmp sounds really good, full 5.ch and so are my games.
You can say now im totally satisfied with vista 64/32, sounds great and it plays all my games really well. Anyways i hope this helps all you out there, let us know how you get on.

RejZoR wrote:
You can get best sound with this plugin for WinAMP:
http://forums.winamp.com/showthread....readid=267586?
Thanks for that link! That plugin brings the sound back to very close to what I had with XP.

How can I improve sound quality

hp envy 14t beats laptop ... how to improve sound quality

Hi Heddratt,
The Beats system is actually designed to be connected to high quality external speakers or headphones to provide the best listening experience from your computer. The onboard speakers are not capable to handling the full range of sound that the Beats Audio provides. I have Beats on one of my notebooks.
Having said that, there is hope.. Here is a helpful link to a local Post about this exact subject.   The original author has been diligent in keeping the post updated and you may post comments and questions on the Thread.
Beats Audio EQ Setting/ General Sound Advice - HP Support Forum
I hope you find the information helpful, If nothing else, you will learn something new! Smiling.
Good Luck!
Please Click the Kudos Star on the Left to say "Thank You" for the help!
    Is it Solved? Make it easier for other people to find the Answer:
       Please Mark my Post “Accept as Solution” to say "Yes!"
Remember: The more information you provide, the better help you receive.
Always Include: (Computer) Product Number , Printer – Model Number ,
                        Operating System and an Error Description
                             Never give out your Serial Number
                              2012 Year of the Dragon!
Kind Regards,
Dragon-Fur

Audigy 2ZS How to output same sound quality on rear and fro

Similar Messages

Maybe you are looking for