Audigy 2Zs No System Sound, No Audio Card So

About a month ago I ugraded to the latest drivers for audigy 2ZS and everything ran smoothly until now. I can't understand all of a suden have no sound at all. Checked everything is connected properly. My os is windows vista. Please help. I tried google to find and answer but not luck.

Well to upgrade to beta driver is never a good thing to do . If you have system restore go back in time to before the new drivers were installed . If that does not work uninstall the new drivers and install the old drivers again .Good Luck :smileyvery-happy:

Similar Messages

Could not detect Sound Blaster Audio Card on xp sp2 Sys

I have Audigy Platinum and trying to install to a recently re-installed windows xp sp2 system. On my previous install everything was working fine and now I am looking to install the newest drivers and the error comes up [color="#ff3300">"could not detect Sound Blaster Audio Card on system". The strange thing is windows recognizes the card and will install it's drivers, but when I go to install the latest driver update I get the error. In addition, I also tried to run the install from my original disk.
I also?un-installed the devices showing? in the windows device manager, then tried and the same error, I even tried it in safe mode. Any ideas?Thanks and Advance,Mikel

Yes i think the real lesson here is not to buy creative,. i have the same problem with their junky card, so i guess ill just have to take buisness somewhere else. if you all do the same perhaps the threat of them going out of buisness will have them deal with their problems. if not atleast we saved others the headache of learning this lesson.

External Usb Audio Card Popping and Cracking sound with Satellite L500

Greetings,
My name is Boyan and I am from Bulgaria and about an year ago I've bought a satellite laptop from the l500 series ( i can not state which exactly is the model at the moment because my computer is not currently with me and on my user manual the only thing which is stated is that it is for L500/L505/ L500D / L505D . But by memory I think it was the Satellite L500D-ST5506 which is currently not at my dispossal because I gave it for repair for the same problem which I will state down below)
The problem with my laptop is that when I plug a Usb Audio card in my laptop I have a cracking sound when live sound is played trough the speakers/headphones from the external card. I've tried numerous audio cards and speakers/headpohnes which work perfectly fine with other computer, including laptops but the same problem keeps on showing up in the headphones/speakers of my laptop when I am using an external audio card to connect them to the laptop.
The problem is prominent only when the sound signal passes trough an external audio card and it is very annyoing since I use my laptop to create music and i've bought an expenssive audio card and speakers which can not be used with the laptop. I've tried 3 models of audio cards:
M-Audio Fast Track Pro
Behringer uca 222
and a simple external 3d sound usb audio card and the problem still appears.
At first I thought that the problem should be software and I should install new drivers although windows 7 automaticaly recognizes and intalls the drivers for the devices and I have sound in them (but with cracks and popps) so i tried using the official drivers sold to me with the audio cards but with no luck: The problem was still there. I tried finding new drivers of the audio cards on the official distributors websited and i've downloaded them but the problem was still there. Then i tried to delete every audio driver on my computer and just use the external audio card for sound but this dint help eighter. I've updated my drivers for my build-in audio card as well but again - no luck.
After that.the frist thing I did when (2 weeks after i bought the laptop) was to contact the store from which i bought my audio card and they stated that the problem may be eighter latency or high voltage from the laptop so they adviced me to try to lower the latency from the settings or to try and see if the problem remains if my laptop is only running on battery. I've tried both things and they didn't help. The audio cards worked without a problem on every other computer I've tried them on except mine. So they said to me that the problem couldnt possibly be from the audio cards .
What I did next was I gave my laptop to the official distributor of toshiba in my country so they can fix my problem. What they said to me was that the problem is caused from the version of windows which was pre-installed on my laptop and that it wasnt compitable with the audio cards (which was bizzar sounding because I've tried them on the same windows and they've worked, just on other computers). So I got back my laptop and changed my operating sistem from Windows 7 Home Premium 64bit to Windows 7 Ultimate Edition 64bit to Windows 7 Ultimate Edition 32bit and on all of those versions the problem was there: whenever I activate a Usb Audio Card and audio signal passes trough it I heard cracks and popps. I even tried isntalling Windows XP but the laptop wants spesific SATA drivers for the installation of Windows XP which although i did find - they didnt help me install XP and I didn't want to go in to the BIOS of the computer to try to put a new one and so on because I am not so sure about that and I could lose my warranty so I said to the official repair store for Toshiba in my town to put XP on my computer to fix the problem but they can't because they are not liscened to operate with software which doesn't have a recipt for its purchase ( which i didnt because i bought my windows xp long ago and i've lost the recipt)
I gave it for repair for the second time telling them that the change of my operating system did not solve my problem and what they did was they changed the whole motherboard on my computer, stating that the build in realtek audio device on my computer is not good enough to support an usb audio card or it maybe broken and they have to change the whole motherboard because the build in card is glued to it, so they did that but my problem wasn't solved. They told me that although I am using and external usb audio card the signal still passes trough my internal one and I have to disable it so i tried disabling it trough the control panel but this did not solve the problem and i do not have an option from BIOS to disable my build-in audio card. Another thing which I thought maybe causing the problem is that the two audio cards aren't working on the same bit rate and Hertz so I set both cards to 16 bit 48000hz DVD Quality (Also tried other options on the 3 cards i have) but...the same thing happend.
They told me that this is just my luck and that the build in audio card doesn't support this external audio cards and I should had been more careful when choosing my laptop at first.
I couldn't accept this awnser for several reasons:
1) This audio cards work on lower version of windows and are supported by much older models of Realtek and much older computers (one of them was bought 2000!!!!! and my laptop is from 2010!!)
2) The guys who were fixing the problem apperantley didn't go in so deep in to my problem because they didn't know what actually the problem was they just knew that there is a problem with the audio card and the computer interacting with eachother, they didnt know that there is cracking during live play from the external audio card.
3) I can not accept the fact that Toshiba is manufacturing models with chipset audio cards which can not support a simple external Usb Audio Card. This is totally unacceptable for me and I truly hope this is not the case!
4)They didn't try my audiocards on an other laptop from the same series stating that they do not have one at their dispossal at the moment so I will go tomorrow to a local store and try the audio cards by my self on the same computer in the store.
What I did now was I gave back my laptop for repair asking for a statement of the problem in wrtting with all details of the problem so I can go to court or ask for a new laptop but I will be charged with some money because according to them there is no problem in the laptop and the problem is that my external audio cards arent compitable with the build in internal chipset audio card. If I give my laptop for repair and there is no hardware problem I will have to pay some money. I will do this but I am now mad, since this will not solve my problem and I am loosing time and money.
What I am asking here is, if you can not help me solve my problem and advice me what to do to fix it, please provide me the details of the chipset build in audiocard on my motherboard, so i can investigate if it is compitable with my external audio cards and contact the audio card dealers to ask them for their opinion. Or if you can tell me with what it is compitable with and with what not, it would be great. I personally think that this laptop should have no problems at all with running a simple external usb audio card but I am asking you, if you know something more about that.
If the problem is from the build in chipset then Toshiba is manufacturing (or at least selling) audiocards which aren't at a normal standart but sadly I cant do nothing about it except complain to Toshiba and never deal whith such productgs anymore. In the other case if this is not true, then my laptop has a problem which is different and I will have to go to court with the repair mans for not fixing my laptop or not giving a new one when I have warranty which will not be Toshiba's fault and It will in a way solve my problem.
I hope you understand how Important this is for me and I hope I resolve the problem as soon as possible.
P.S
I would like to state that I am well aware of the grammar mistakes I have made in the text below and I would like to ask for your apologies as I am not a native English language speaker.

hi i just like to say i had a similar fault though i would be surprised if it causing yours,but you never know,my fault was my laptop lid, [9 months old] it contains the mic ,and when the lid was in a certain angle crackles could be heard worse when i had my external sound card in, it was a faulty membrane [ lid to body] easily missed by engineer because it was the same angle all the time it happened,good luck, PS you English is very good
Message was edited by: sido1

Usb Audio Card - Popps and Cracking Sound.

Greetings,
My name is Boyan and I am from Bulgaria and about an year ago I've bought a satellite laptop from the l500 series ( i can not state which exactly is the model at the moment because my computer is not currently with me and on my user manual the only thing which is stated is that it is for L500/L505/ L500D / L505D . But by memory I think it was the Satellite L500D-ST5506 which is currently not at my dispossal because I gave it for repair for the same problem which I will state down below)
The problem with my laptop is that when I plug a Usb Audio card in my laptop I have a cracking sound when live sound is played trough the speakers/headphones from the external card. I've tried numerous audio cards and speakers/headpohnes which work perfectly fine with other computer, including laptops but the same problem keeps on showing up in the headphones/speakers of my laptop when I am using an external audio card to connect them to the laptop.
The problem is prominent only when the sound signal passes trough an external audio card and it is very annyoing since I use my laptop to create music and i've bought an expenssive audio card and speakers which can not be used with the laptop. I've tried 3 models of audio cards:
M-Audio Fast Track Pro
Behringer uca 222
and a simple external 3d sound usb audio card and the problem still appears.
At first I thought that the problem should be software and I should install new drivers although windows 7 automaticaly recognizes and intalls the drivers for the devices and I have sound in them (but with cracks and popps) so i tried using the official drivers sold to me with the audio cards but with no luck: The problem was still there. I tried finding new drivers of the audio cards on the official distributors websited and i've downloaded them but the problem was still there. Then i tried to delete every audio driver on my computer and just use the external audio card for sound but this dint help eighter. I've updated my drivers for my build-in audio card as well but again - no luck.
After that.the frist thing I did when (2 weeks after i bought the laptop) was to contact the store from which i bought my audio card and they stated that the problem may be eighter latency or high voltage from the laptop so they adviced me to try to lower the latency from the settings or to try and see if the problem remains if my laptop is only running on battery. I've tried both things and they didn't help. The audio cards worked without a problem on every other computer I've tried them on except mine. So they said to me that the problem couldnt possibly be from the audio cards .
What I did next was I gave my laptop to the official distributor of toshiba in my country so they can fix my problem. What they said to me was that the problem is caused from the version of windows which was pre-installed on my laptop and that it wasnt compitable with the audio cards (which was bizzar sounding because I've tried them on the same windows and they've worked, just on other computers). So I got back my laptop and changed my operating sistem from Windows 7 Home Premium 64bit to Windows 7 Ultimate Edition 64bit to Windows 7 Ultimate Edition 32bit and on all of those versions the problem was there: whenever I activate a Usb Audio Card and audio signal passes trough it I heard cracks and popps. I even tried isntalling Windows XP but the laptop wants spesific SATA drivers for the installation of Windows XP which although i did find - they didnt help me install XP and I didn't want to go in to the BIOS of the computer to try to put a new one and so on because I am not so sure about that and I could lose my warranty so I said to the official repair store for Toshiba in my town to put XP on my computer to fix the problem but they can't because they are not liscened to operate with software which doesn't have a recipt for its purchase ( which i didnt because i bought my windows xp long ago and i've lost the recipt)
I gave it for repair for the second time telling them that the change of my operating system did not solve my problem and what they did was they changed the whole motherboard on my computer, stating that the build in realtek audio device on my computer is not good enough to support an usb audio card or it maybe broken and they have to change the whole motherboard because the build in card is glued to it, so they did that but my problem wasn't solved. They told me that although I am using and external usb audio card the signal still passes trough my internal one and I have to disable it so i tried disabling it trough the control panel but this did not solve the problem and i do not have an option from BIOS to disable my build-in audio card. Another thing which I thought maybe causing the problem is that the two audio cards aren't working on the same bit rate and Hertz so I set both cards to 16 bit 48000hz DVD Quality (Also tried other options on the 3 cards i have) but...the same thing happend.
They told me that this is just my luck and that the build in audio card doesn't support this external audio cards and I should had been more careful when choosing my laptop at first.
I couldn't accept this awnser for several reasons:
1) This audio cards work on lower version of windows and are supported by much older models of Realtek and much older computers (one of them was bought 2000!!!!! and my laptop is from 2010!!)
2) The guys who were fixing the problem apperantley didn't go in so deep in to my problem because they didn't know what actually the problem was they just knew that there is a problem with the audio card and the computer interacting with eachother, they didnt know that there is cracking during live play from the external audio card.
3) I can not accept the fact that Toshiba is manufacturing models with chipset audio cards which can not support a simple external Usb Audio Card. This is totally unacceptable for me and I truly hope this is not the case!
4)They didn't try my audiocards on an other laptop from the same series stating that they do not have one at their dispossal at the moment so I will go tomorrow to a local store and try the audio cards by my self on the same computer in the store.
What I did now was I gave back my laptop for repair asking for a statement of the problem in wrtting with all details of the problem so I can go to court or ask for a new laptop but I will be charged with some money because according to them there is no problem in the laptop and the problem is that my external audio cards arent compitable with the build in internal chipset audio card. If I give my laptop for repair and there is no hardware problem I will have to pay some money. I will do this but I am now mad, since this will not solve my problem and I am loosing time and money.
What I am asking here is, if you can not help me solve my problem and advice me what to do to fix it, please provide me the details of the chipset build in audiocard on my motherboard, so i can investigate if it is compitable with my external audio cards and contact the audio card dealers to ask them for their opinion. Or if you can tell me with what it is compitable with and with what not, it would be great. I personally think that this laptop should have no problems at all with running a simple external usb audio card but I am asking you, if you know something more about that.
If the problem is from the build in chipset then Toshiba is manufacturing (or at least selling) audiocards which aren't at a normal standart but sadly I cant do nothing about it except complain to Toshiba and never deal whith such productgs anymore. In the other case if this is not true, then my laptop has a problem which is different and I will have to go to court with the repair mans for not fixing my laptop or not giving a new one when I have warranty which will not be Toshiba's fault and It will in a way solve my problem.
I hope you understand how Important this is for me and I hope I resolve the problem as soon as possible.
P.S
I would like to state that I am well aware of the grammar mistakes I have made in the text below and I would like to ask for your apologies as I am not a native English language speaker.

hi i just like to say i had a similar fault though i would be surprised if it causing yours,but you never know,my fault was my laptop lid, [9 months old] it contains the mic ,and when the lid was in a certain angle crackles could be heard worse when i had my external sound card in, it was a faulty membrane [ lid to body] easily missed by engineer because it was the same angle all the time it happened,good luck, PS you English is very good
Message was edited by: sido1

System sound when starting up, but no app sound

I was using Audacity with the lame extension to chop a sound file to make a ringtone.
Now I can't get my sound to work. I unistalled Audacity and ran the Lame remover but I still don't have sound.
Any suggestions?
I already repaired permissions a few times but that did not help.

Loss of sound after running Audacity
Applies mainly to Audacity 1.2.4 and earlier
An Apple issue whereby certain other applications lose sound after running Audacity has now been largely resolved in the current Audacity 1.2.5 (Intel), 1.2.6 (Power PC) and 1.3.x Beta releases.
If you have lost sound on your system after running Audacity, make sure you have the latest Audacity stable or Beta version , and drag the entire contents of any older version to to the trash.
Audacity 1.2.5/6:
Launch Audacity and follow these steps:
1.
Click Audacity > Preferences and on the Quality tab, set:
Default Sample Rate to 44 100 Hz
Default Sample Format to 16 bit
2.
On the Audio I/O tab of Preferences:
Set "Recording Channels" to mono or stereo
Check the box "Do not modify audio device settings (such as sample rate)".
3.
Set the Project Rate button bottom left of the Audacity screen to the 44 100 Hz.
4.
Close Audacity then click on the Mac Hard Disk and then on Applications > Utilities > Audio MIDI Setup.
5.
Click on the Audio Devices tab and on the left-hand (input) side, select your built-in audio device in the "Default Input" and "Properties For" dropdowns. On the right-hand (output) side, select your built-in audio device in the "Default Output" and "System Output" boxes.
6.
On both the input and output sides, change the "Format" dropdown boxes to have the same settings as Audacity (that is, 44 100 Hz/2ch-16 bit, or 44 100 Hz/1ch-16 bit). The "1ch" or "2ch" refers to mono or stereo respectively.
Note: If you are on OS X 10.1 or earlier, go to Apple Menu > System Preferences > Sound and perform the same changes as above.
Audacity 1.3.3 and later:
Generally speaking, the later PortAudio v19 I/O library used in Audacity 1.3.3 and later should not change system sound settings. Therefore Beta Audacity does not have a "Do not modify audio device settings..." box, and it is not necessary to launch it to restore system sound. Simply follow the instructions above for 1.2.5/6 to reset system sound in Audio MIDI Setup.
However, if you have previously run a 1.2.x version of Audacity on the machine, it is recommended to completely reset the 1.3.x Preferences before launching Audacity again. Do this by opening audacity.cfg in a text editor and removing all the content except the line "NewPrefsInitialized=1". See here for full instructions.
Note: There is one other known reason why sound cuts out on G5 machines after running Audacity. It is due to a faulty headphone (external output) jack, whereby a component internal to the jack becomes bent from use so that the computer still thinks the headphones are plugged in. Because the user may be plugging headphones into the back of the computer when using Audacity, the timing of the occurrence would make one think it was the software, but it is not. When this is the problem, the user will notice a red glow coming out of the headphone jack. Try plugging your headphones back in and then gently manipulate the headphones plug up/down and left/right so as to bend back the internal component to its correct position. When done, the red light will go off and sound will be restored.
Please visit the following link for more helpful information...
http://wiki.audacityteam.org/wiki/Mac_Bugs

PC suddenly lost my sound card (Audigy 2zs)

Yesterday, out of the blue, my PC was no longer able to play music. I was playing an album through mediamonkey?and suddenly it stopped. Took me some time to realize that my system no longer identified the sound card. I'm using an Audigy 2ZS and now not even the drivers appear on the system manager.
I tried a lot of things to no avail:
- Tried to reinstall the drivers: they won?t install because they can't find the hardware.
- Tried uninstalling everything (drivers, creative software, etc), still coudn't install the drivers.
- Changed card to a different slot, still system can't find it
- Tried to install an X-Fi that I also have (I still prefer the audigy) on both slots, no go, same problem, same steps as the above.
- Tried a system restore, no change.
I am now using my onboard sound but I would very much like to go back to my audigy. Here are my specs:
- Gigabyte GA-P3-S3G mobo
- Intel Core 2 Duo E7200 @ 2.53GHz
- 2 GB Ram
- Nvidea 8800 gt PCI-E ultra-edition (Gigabyte)
- Windows XP SP3
- PCI wireless network card (Blekin Rangebooster, can't remember the model)
As far as I know, nothing on my system has changed. It probably has nothing to do with that or else system restore would work.
In the past I had a similar problem, with a different machine not being able to see the sound card on a fresh XP install. I gave up then, but after a few days, all of the sudden, a message poped-up telling "new hardware detected". Only then was I able to install the complete software and driver pack.
So anyway, any ideas on this one? I would love to get my Audigy online again....

/Re: PC suddenly lost my sound card (Audigy 2zs)& Hi Zehnra, I don't think it's exacly the same problem. My PC sees no card at all and even reeboting with a diferent one on a diferent slot won't do the trick. I also don't think it has anything to do with any windows update or else system restore would take care of that (I restored it to 24h of the failling point).
I noticed one thing thouh, I still have some leftovers from creative stuff, so maybe that's what blocking basic xp drivers. But hunting everything down by hand is a b****, specialy going through the registries...
On your case, someone told me on some other forum that there is some kind of bug with newer drivers and SP3. If I were you I would try to unistall everything first, also the x-fi drivers. There is a diferent instalation menu within the installation package, directly on the xp drivers folder. After that try rebooting and if your PC sees the card, try installing trhough the original CD... Sorry if you already tried that but I ran out of ideas. Moved to my onboard card now.... ?

Can Anyone provide me with the sound card specs for a 2GHz MacBook Intel Core 2 Duo? The system profiler lists the audio card as Intel High Definition Audio: audiocode 63

Can Anyone provide me with the sound card specs for a 2GHz MacBook Intel Core 2 Duo? The system profiler lists the audio card as Intel High Definition Audio: audiocode 63

ok thankx! but i must to know the output impendatie of my audio card= intel high definition audio? can somebody help me
this is my mac book
http://www.everymac.com/systems/apple/macbook/specs/macbook-core-2-duo-2.0-alumi num-13-late-2008-unibody-specs.html

Sound blaster Audigy 2zs platinum setup with creative inspire 5.1 digital 5

what should the setup be for the sound blaster Audigy 2zs platinum and the reati've inspire 5. digital 5500 because with the decoder in i only get center fl fr on games. i dont get sound from the rear speakers.but when i take the decoder out and just plug the 3 leads straight into the back of my sound card i get 5. any help plz.i done a thx sound test with the decoder in it does fl i can hear it but i can hear the center as well
and no sound comes out on the 2 rear speakers when doing the test.but when puting the 3 cables straight into the back of the sound card i runed the test and i could hear all the speakers fine even the rear speakers any help plz is this ment 2 happen or do i have to change some settings thanks for any help plz help me thanks.

I Have had a problem for ages. I have the Audigy 2 ZS Platinum and Inspire 5. digital 5500.
I have copied the advice I received/didnt recieve from creative.
Best of luck
Dear Martin
Thanks for your reply
I am sorry for the problem you are facing.
To achieve outputs from all the speaker during speaker test, you will need to have an analog connection, or digital DIN connection.
That will be possible if you connect the three line out jacks on your soundcard, to the three audio input (analog jacks->green,black,orange) on your speaker, if it has this connection. Or, you may connect them using Digital DIN, if they have this connection.
If you are using digital connection (coaxial, optical), there will be no way to achieve sound output from all the speakers during 5. speaker test, as they carry stereo signal.
Best Regards
(Mod Note: Name Removed)
Creative Customer Support Services
Creative Labs Europe:
Original Message Follows:
Hi
I understand you must be busy, so no problem.
No I do not hear EAX when in Pro-logic mode. I only hear (depending on the game in question)
Half life two: front left-right and centre. NO rears
Fear: Front, left, right, & centre. No rears
Farcry Front left, right & centre. No Rears
When I run your speaker test HISSSSS, No Rears, no front left or right
Beats me?
Regards
Martin
-----Original Message-----
From: CLE Customer Support [[email][email protected]]mailto:[email protected][/url]]
Sent: 24 January 2006 5:44
To: Martin
Dear Martin
I apologize for the delay on the answer.
If you select Dolby Prologic mode on the decoder, are you able to listen
the game audio, with EAX, in all of the speakers?
Regarding to the optional bay dri've, you can purchase it from ou
Best Regards
(Mod Note: Name Removed)
Original Message Follows:
Hello
Your email was helpful, unfortunately, not for my unit, you see I would
have
connected the Jack leads in by now if the inspire had Jack lead inputs
as
you describe
Please don't think I am being sarcastic, but from reading the
correspondence
below it would seem as if your department is having difficulty
understanding
my problem.
Also it would seem your department doesn't have the necessary technical
information on your very own product, so to help with your dilemma I
have
taken photos of the input/outputs on the Inspire unit.
You will clearly see the inspire has no inputs other than Coaxial and
Optic.
This leaves me back to my last post. I think the solution would be for
me to
purchase the correct processor, which would have come with the original
sound card had I not been a little tight on the money front.
I have attached a photo of the sound card with the processor, I would
love
to buy this processor but find myself unable to locate this product on
your
web site. Would you possibly be able to send me the correct link to this
item so I can buy this Processor Please?
Kind regards
Martin
-----Original Message-----
From: CLE Customer Support [[email][email protected]]mailto:[email protected][/url]]
Sent: 8 January 2006 0:3
To: Martin
Subject: RE: CLE -
Dear Martin
Thanks for your reply
Your soundcard is Audigy 2 ZS
Your speaker is Creative Inspire 5. Digital 5500
You will need to have a 3:3 cable(with the color green, black, orange)
to connect your soundcard to your speaker, to achieve the 5. effects
with games.
Below is the connection:
- Connect line out jack of Audigy 2 ZS
to 'Front' of Creative Inspire 5. Digital 5500 using the green color
connection
- Connect line out 2 jack of Audigy 2 ZS
to 'Rear' of Creative Inspire 5. Digital 5500 using the black color
connection
- Connect line out 3 jack of Audigy 2 ZS
to 'Center/Subwoofer' of Creative Inspire 5. Digital 5500 using the
orange color connection
Once you have done the correct connection, play the game DOOM3.
Ensure you have selected either the EAX or surround option in the game
settings.
Does it work?
Best Regards
(Mod Note: Name Removed)
Creative Customer Support Services
Creative Labs Europe
Original Message Follows:
You have lost me. Your sound card clearly states that I can have EAX
surround decoding from the sound card I have purchased.
All of the games on your web site claim to give me an environmental
effect
that will blow my mind, hence EAX.
All I have done wrong is NOT buying your decoder that comes with the
sound
card. My mistake.
All I want to do is re-address this issue and buy the correct
decoder/processor.
Can you point me to the correct link on your web site so I can buy the
correct decoder/processor?
As for the PCM out of the above cables, this foxes me as my other
equipment
only use Optical cabling on my Lexicon processor and from that I have DD
7., DTS 7. and meridian 5. lossless.
My issue is more to do with NO EAX from the rear and centre channels
while
in-game.
Kind regards
Martin
-----Original Message-----
From: CLE Customer Support [[email][email protected]]mailto:[email protected][/url]]
Sent: 6 January 2006 09:3
To: Martin
Subject: RE: CLE - Technical Support Request (KMM887805I6636L0KM)
Dear Martin
Thanks for your reply
All commercial digital connection eg. optical or coaxial cable will only
carry PCM stereo signal. If you want to output the signal to a surround
5. with extra EAX environment effects, it will not be possible at all
since it is only restricted to stereo channel signal.
As per current industry limitations, we are bound to follow the standard
one-signal output for all our SPDIF and Optical output jacks. This is
something that is currently shared by all vendors for all products.
Please note that all games are not dolby digital, even they are , it
will require certain motherboard to encode it to dolby digital signal,
which our soundcard does not support.
You can only use analog connections to gain true 5. surround for
gaming..
email.
Best Regards
(Mod Note: Name Removed)
Creative Customer Support Services
Creative Labs Europe
Original Message Follows:
Hi Joong
I don't fully understand your email, but I do get the gist of what
you're
saying and understand I need to connect the analogue cable to fully
appreciate the sound in EAX.
Would you be able to tell me what product I could buy from your
catalogue
which would marry up with the sound card I have, as I understand now
that
the Inspire 5. will not do the job.
Kind regards
Martin
-----Original Message-----
From: CLE Customer Support [[email][email protected]]mailto:[email protected][/url]]
Sent: 6 January 2006 04:00
To: Martin
Subject: RE: CLE - Technical Support Request (KMM8875697I6636L0KM)
Dear Martin
Thank you for the reply.
Computer games written with support for 3D audio do not require a Dolby
Digital Interacti've Content Encoder (DICE) to output multichannel sound,
with no exceptions. Sound devices that support the real time encoder
technology from Dolby will simply receive the multichannel wave file
output and encode it in real time to a somewhat modified Dolby Digital
bitstream. Creative does not support the Dolby Digital Interacti've
Content Encoder on any of its sound cards.
The only difference between a Sound Blaster card and an audio card that
has a real time encoder, is that you can make a one-wire, digital
connection from your audio card to your home theater receiver and enjoy
discrete multichannel sound from the game. However there will be a
continuous, slight delay, known as "latency", as the encoder is creating
and transmitting the bitstream, and of course the compression scheme
being used is "lossy" (i.e. not bit-accurate).
If you want to enjoy 3D audio in 3D enabled PC games in multichannel
surround sound with a Sound Blaster card, it is recommended that you
connect the analog outputs of the sound card directly to the analog
inputs of the receiver. This will require 3 cables for 5. surround
sound, one for front right and left, one for rear left and right, and
another one for front center and subwoofer. Though it requires more
cables than a real time encoder system, it will not have any latency
issues. When connecting PC audio to a home theater receiver, Creative's
latest sound cards such as Sound Blaster Audigy, Sound Blaster Audigy 2
are likely to provide higher quality audio than any Dolby Digital real
time encode system available for the PC today.
Please retain all the previous correspondence when replying to this
email.
Best Regards
(Mod Note: Name Removed)
Creative Customer Support Services
Please do not use this link to submit technical queries
Original Message Follows:
Hi
One particular game which has "in-game" DD is Farcry; I used this as my
benchmark disc for DD and to push my Nvidia 7800 GTX GPU's (I have tried
it
on friend's machines and they get the full surround effect so I Know
this
version is ok. I also have ALL of the game patches & updates.
I would like to point out that while playing Doom 3, Half Life 2,Fear,
Colin
McRae rally 04,FIFA 2004,Meddle of honour pacific assault, Rome, Shadow
ops, All these games have EAX HD, which is enabled within the options
menu
"in-game", But I do not get ANY use out of the rear's and I might as
well
listen in stereo.
No, inspire 5500 does not automatically switch while "in-game" when DD
is present as you would expect, but does if it was a Movie, which makes
me
think the DD stream isn't getting to the processor.
I originally thought I could put all this to rest if I could buy the
control
panel that would have come with the Sound card if I had not tried to
save
money, but every time I search your accessories site I get completely
lost,
it really isn't user friendly, the sub-menus are very time consuming and
point you in the wrong direction because they are not categorised as Joe
public would understand
I downloaded your TEST Movies and creative demo player utility, ran it
but
still no EAX HD or DD if that were present.
I want to put this card and Processor into my boys computer (which is
the
same Spec as mine and I will update to the FX series, but I am unwilling
if
I cannot find a logical reason why this set-up cannot work first.
Would it have anything to do with the pins on the Digital out on the
sound
card plug, the one I bought and was attached to the last email? Only
sending
certain channels down to the processor?
Regards
Martin
-----Original Message-----
From: CLE Customer Support [[email][email protected]]mailto:[email protected][/url]]
Sent: 5 January 2006 08:09
To: Martin
Subject: RE: CLE - Technical Support Request (KMM8868993I6636L0KM)
Dear Martin
Thanks for your reply
Your speakers are fine as you mentioned that there is sound from all the
speakers when you are playing movie.
May i know what game are you playing when there are no sound from the
rear speakers?
Have you done the appropriate settings in the game to achieve the 5.
sound?
Is there any game patches that you will need to update?
Does the Dolby Digital LED light up when you are playing the game?
Please retain all the previous correspondence when replying to this
email.
Best Regards
(Mod Note: Name Removed)
Creative Customer Support Servic
Original Message Follows:
Hi
I am sorry; I should have said the Inspire 5. was model number digital
5500
S/N SW330030026.
The inspire has these connection on the back of the processor
>From top/back of unit
Audio Outputs
Front
Rear
Centre/subwoofer
Audio inputs
Audio line in
Coaxial
Optical
DIN
The Din to a remotely located Subwoofer which has the speaker leads
inputting into it. Plus power.
Attached is the creative view of the controls menu and I have attached
the
invoice I was sent, it shows the lead I was told to fit.
As I said, I can now hear DD5. while within a movie from ALL speakers
BUT
no sound from rears during IN GAME DD5.
I do not use this PC for films only games.
Regards
Martin
If you are having a digital connection, it is normal for only get only
front left/right is you use the speaker test option.
http://us.creative.com/support/kb/article.asp?l=3&sid=4858
Speaker test only outputs from two front speakers?
You mentioned that that you are unable to get any sound from the rear
speakers when playing game right? May i know are you using a digital
connection? May i know what speaker settings have been made under
Creative Speaker settings?
Do get back to me on the above.
Thanks
Original Message Follows:
Operating System: Windows XP Professional x64 Edition
Creative Model Number: SBO 350
Computer Brand/Model: home made
Processor/CPU: AMD 64
Memory: Gig DDR 4
BIOS Type/Revision: 5. 39
System Board/Chipset: ASUS A8N-SLI Deluxe
Detailed Problem Description:
I have the above Sound card.
I also own Inspire 5. amp/processor
I Wanted to save money by connecting above sound
card to amp/processor
Connections on sound card made life very difficult
I contacted Creative for help. you told me to buy
an RCA to mini jack cord which also has other connections, from your
web site, (I tried to find
the product number for you, but your sub-menu
system is so poor I couldn't locate the RCA/mini
3.5 /to phono link for you) this cord connects
directly into the digital in, on the sound card (3.5 Mini jack) to the
coaxial input on the
inspire 5. amp/processor.
I have enabled ALL sp-diff settings and digital in
setting on every program/utility/kitchen sink and all.
I have an SP-Diff wire from DVD burner to creative
sound card, and yes its enabled and digital only
is selected.
I can play a DVD and see the inspire 5.
automatically change from Pro-logic to Dolby
digital when it See's an AC-3 stream.
when I try and play ANY game you say has EAX
,2,3,4 I cannot get any sound from my rear
speakers (see above in Dolby Digital ALL speakers
work correctly)
when I enter the set-up menu within the creative
software you supply with the sound card and select
5. speaker, digital only, test the speakers via
the white noise function, all i hear is left and
right noise. no centre, no rears.
I phoned you tech support line, the boy on the
phone didn't have much of a clue about your
product and I had to tell him what connections sit
on the inspire 5. series amp/processor.
I want to build another PC for my son, I want to
add the FX series sound card and amp, but i am not
willing to buy anything until i feel you have
helped me to solve this problem first.
please can you help, I am at the end of my tether
with this sound card.
kind regards
Martin Waite
Message Edited by Daniel-CL on 0-28-2006 :36 PM

Midi/audio sync prob after sblive to audigy 2zs upgrade

Have posted the following earlier today in Soundblaster forum - then thought it may be better off here.....
Hi all - have just had to quickly buy new soundcard as main line-out on sblive gave up the ghost, after years of no probs. Bought Audigy 2zs, as thought this would not be too much of a shock for ageing AMDk6 450mhz running Win98se. (Am waiting for new pc music system.) Installed Audigy, using 1xm1n's excellent set-up guide, and thought everything was ok. However, when running sequencer, the midi tracks are fine, while the audio slowly goes out of sync. Can anybody explain what's happening? Would not normally panic, and wait for new pc, but have a deadline to finish project for the Barmy Army !!
Seriously thinking of reinstalling sblive, and using the rear line-outs to monitor on - but line-in & mic will then not work. Also was hoping the Audigy ASIO drivers would let me do the final mix in Cubase.
Did I mention the odd crackle & pop....? .....Aaaaaaargh!!
Regards.

Jason,
Yes I tried pulling card. What has happened.
. Card was "re-found" by windows for no reason which started the problems.
2. I deleted driver in control panel, shutdown and pulled card, rebooted again with no card.
3. Put the card back and rebooted again and at that point it showed as Audigy ZS, although it did not look like all functionality was there as before.
4. So I installed the new January 06 drivers. Seemed to go okay.
5. Upon reboot, came up as Creative Audigy Audio Processor" again. However things "worked" for a while. The mixer came up, etc.
6. Seemed to be working, then stopped working (no sound)....and upon a reboot, was re-found again and was using old generic drivers from 2003. And was no longer called a ZS.
7. EDIT: Important, in the "sound and audio" devices in control panel, it is listed as an EMU0k (or some such designation) which I understand may mean the card has gone bad.
8. The network fiber connection also periodically came up as yellow exclamation mark or working based on what was going on above.
It appears that these problems may be symptoms the card is going bad based on some other posts I found? Something about a scrambled EPROM? I do have a new unused Audigy ZS card I can try.
What is the best approach to put in another ZS. Delete the driver, shutdown, pull the card and put the new one in? And of course plug in the breakout box to it. Will it "find" the new January 06 drivers upon install or will I have to re-install those again on this new card. I know it is the same card but I assume the ID will be different.
If I need to re-install the drivers, do I just re-run the install or do I need to run CTZAP etc. first? I already have all the applications loaded off the original CD and would prefer not to have to do all that again...
Thanks again,
BJB
Message Edited by BJB on <SPAN class=date_text>08-22-2006 <SPAN class=time_text>09:4 AM
Message Edited by BJB on 08-22-2006 0:50 AM

Help! Creative Sound Blaster Audigy SE 7.1 Sound Card -

Hello. I've just recieved my new soundcard. It is the Creative Sound Blaster Audigy SE 7. Sound Card - OEM. (Located here: http://www.overclockers.co.uk/showp...atid=&subcat=)
My motherboard is a Asus A8N SLi se.
Now, I have put it in my motherboard, and just tried to install the drivers. I got an error though. It said "No compatible creative product detected." So I downloaded the drivers off the Creative site, and that did not help either. I disabled the onboard sound in the BIOS, and yet it still did not work. I tried plugging in the soundcard into each of the soundcard ports on my motherboard, and none of them detected the card.
I am sick of using onboard, and would like to get this problem fixed.
Some additional information:
The back audio/microphone ports on my motherboard never worked. I have been using the front sockets on my case. I see cables running from my motherboard to the front of my case. Maybe one of those cables need to go into my soundcard in order for it to work? I'm not sure which though, so I didn't try it, just incase.
Here are some screenshots of what I'm getting. They might help.
Drivers from the Creative site: http://img409.imageshack.us/img409/4528/gayap9.jpg
Drivers from the Creative CD: http://img520.imageshack.us/img520/3649/gaycdam5.jpg
Unknown Device in my Device Manager: http://img409.imageshack.us/img409/9924/unknownoj8.jpg
Now, I have no other creative parts in my computer. So this should be the soundcard, right?
Thanks in advanced for any replies.

Does the cable from the MB to the front I/O panel simuliar to this one? I installed a Audigy2 ZS in my other system and connected the black cable with the 0 pin connector to the card to use my front phone/mike jacks. Also in your device manager I see the Realtek AC97 still listed. When I installed the XM card in my 600 I disabled it in the BIOS so the entry does not show up in mine just the SB XF-I is displayed.
src="http://i.pbase.com/g6/89/377389/2/79327975.pMK94KJy.jpg" alt="IMG_008.JPG">
Dell XPS 600 Intel Pent D 830 3.0ghz
Chipset- Nvidia nForce4 SLI Intel Edition
WD 60gb HD
2gb Ram
DVD-ROM
DVD-RW (Plextor 760A)
Creative XF-I Extreme Music
Logitech X-540 speakers
EVGA 7950GT
Dell 2007WFP (I-SPS panel)
Win XP SP2
BIOS A

Loud crackeling noise and barely any sound-Audigy 2zs, Dell Dimension 2

I just installed audigy 2zs into my Dell Dimension 2400 and all Im getting is a loud crackle, like static, out of my center speaker (logitech 5. Thx). There is a faint bit of sound in the background also, and no sound at all from the other speakers. Any suggestions? I think I have all the drivers installed and all the tests have passed. Thx.

I have also had some issues with the sound card popping and cracking. It only happens when I am either playing a cd, DVD or a video game. I have a Compaq Presario 2500 laptop, dvd/dvd-rw dri've Maxtor usb2 external hard dri've, Targus 7 port usb2 router, wireless mouse and keyboard, and finally my Audigy 2 NX sound blaster. Seriously I have tried everything and to no avail. I have even wiped the computer just for kicks. I only had the sound card working properly but it didn?t last. What I did was to uninstall the drivers for the DVD dri've and shut down the computer. After the computer started back up it reinstalled the DVD drivers and I had good quality sound.... or so I thought. About 2 days later the same problem arose and I uninstalled the drivers again but this time it did not fix the problem. I have the windows updated, DVD driver?s updated sound card updates EVERYTHING but I still get the static in the speakers only when I am trying to listen to a cd play a video game or watch a DVD. When you have a 4 thousand dollar sound system connected to your sound card would expect good sound from it. Plus the email technicians have emailed me a million things to do but have those worked? NO! I am starting to think that Creative doesn?t care about its costumers anymore. I have seriously thought about getting a different sound card but I have not. I like my 7. surround sound when I listen to mp3 and watch movies that I have ripped on the computer. Someone please give me some advice this sound card is really trying my patience.

Audigy , Sound and Audio Devices Properties 'No Audio Device' appears

<p class="MsoNormal">Out of the blue, in the Sound and Audio Devices Properties, on the Volume tab ?No Audio Device? appears.
On the Sound tab of Sound and Audio Devices Properties, my Default Device says ?Modem # Line play back and is my only drop down choice. I made no configuration changes or installed any new software, it just stopped working.
I have searched for solutions, to no avail. I have an ?!? next to the Microsoft Kernel Audio Mixer in Device Manager that upon re-install displays a message that there was a problem installing this hardware(MEDIA) I/O operation has been aborted because of either a threadd exit or an application request(both installing from driver folder and recovery CD).
I don?t particularly care what sound device I have, just one that works again. I?ve uninstalled the sound devices and let them re-install on reboot and have checked the BIO settings (I don?t have any sound related settings there).
In Admin Tools > Services ?Windows Audio? is started and set to Automatic. When I manually try to play a windows sound in the Sounds tab I get an error message that says my sound card may be in use.
Under Sound and Audio Devices in Device Manager I currently have(when I ?Show Hidden?):
-Audio codecs
-Legacy Audio Drivers
-Legacy Video Capture Devices
-Media Control Devices
-Video codecs
Don't know what else to try. Any help would be appreciated.

cesario85 wrote:
OK The sticky label says SB0240
Here's the screenshot:
[img"]http://www.strikeforceguild.com/temp-images/IRQs.gif" width="640" height="45[/img]
I have since tried putting in a different sound card (another soundblaster, I think a 28 model) and installed its drivers but had the same problems. Im having a go at using the onboard sound though, just to see.Message Edited by cesario85 on 09--2005 06:57 PM
Audigy shares IRQ with IDE controller and firewire controller. This is not good.
NOTE: I suppose you're running your PC on "Standard PC" -mode (since IRQ's >5 not showing). If so, you can try to assign IRQ for the PCI slot, Audigy is installed, manually from BIOS. See your motherboard manual page 4-26.
Can you check if your PC is running as "Standard PC" and not as "ACPI Uniprocessor PC" (Device Manager --> Computer). Make it "ACPI Uniprocessor PC" --> you get more IRQs (virtual) in use.
NOTE: You may need to reinstall OS to get this done.
Also you may need to enable APIC mode on BIOS.
How To:
A) Go to 'Device Manager' a short cut to get there is "Right Click" on the My computer Icon on your desktop (Control Panel --> System --> Hardware),
B) Next click on 'Computer', then double click on 'Standard PC'. Then select 'Driver' and then 'Update Driver'.
C) At this point you will see a screen pop up asking you to do this "Automatically" or Select 'Display a list of the known drivers for this device', - Choose this option.
D) Next you will see - 'Show all hardware of this device class'. Now you can select "ACPI Uniprocessor PC" in the list shown in the window to the right.
E) Now Windows needs/will re-start and re-install all hardware/ settings needed to run in this configuration.
.jtpMessage Edited by jutapa on 09--2005 0:23 PM

[Soundblaster Audigy 2ZS] Sound cutting out in middle of gamepl

I have Vista, and I never had this problem with XP.
I downloaded the Vista drivers and have ran Windows Update for all the missing drivers.
When I run dxdiag.exe
I go to the sound tabs and find this.
The file ctaud2k.sys is not digitally signed, which means that it has not been tested by Microsoft's Windows Hardware Quality Labs (WHQL). You may be able to get a WHQL logo'd driver from the hardware manufacturer.
For Sound
and Sound 2
Sound 3 says everythign is fine.

I've found that Audigy series cards "cut out" if you alter speaker properties in Vista Control Panel.
Creative umm... bug I think that's what they call it...
For example
I find 6bit, 48000 Hz (DVD Quality) is the highest quality I can set.
I've seen it on Audigy 2, Audigy 2ZS and Audigy 4. Win32 and Win 64.
Is your adapter set to studio quality If so - that's most probably it.
Hope this helps.

Is Creative Audigy 2ZS Platinum Sound Cardcompatible with Yamaha Keyboards? (XG sound

Hi,
I have an Yamaha PSR -550 keyboard that can generate Yamaha XG sound forms in addition to General Midi. Now I want to buy a sound card that is 00% compatible with this key board so that I can connect it to computer.
Are Creative Audigy 2ZS Platinum/ Platinum pro sound cards compatible with Yamaha keyboards (especially when it comes to reproducing XG sounds)?
Thanks for your time
Vijjee

Hi,
I have an Yamaha PSR -550 keyboard that can generate Yamaha XG sound forms in addition to General Midi. Now I want to buy a sound card that is 00% compatible with this key board so that I can connect it to computer.
Are Creative Audigy 2ZS Platinum/ Platinum pro sound cards compatible with Yamaha keyboards (especially when it comes to reproducing XG sounds)?
Thanks for your time
Vijjee

Weird sounds on Audigy 2ZS,need he

Hi all,i having problem when i watching dolby digital?dvd. The problem is when i watching dvd it got some "Dit Dak Dit Dak" sounds come out and in my dvd software setting i have on SPDIF output let my Audigy 2ZS decode it. Is it this is soundcard problem?Please help and thanks in advance.Message Edited by warez on 02-6-200603:50 AM

Ok,no matter what i try the problem still there so now i upload a dvd short clip.When i watching this with SPDIF enable using WinDVD 7 Platinum the sounds will come out with "Dit Dak" "Pik Pak" BUT when in analog mode that's nothing happen everything fine.So i hope you guys who using this Audigy 2ZS or X-Fi series help me test whether your people also have such problem,cause if confirm that's sound card problem i gonna send it to warranty. Appreciate your people kindness help. http://www.megaupload.com/?d=AIJM7Y3?**The file that i upload is ISO image,so please use DT to mount it.**

Audigy 2Zs No System Sound, No Audio Card So

Similar Messages

Maybe you are looking for