Audigy 4 and Cubase SX 3.0

Hello,
i need help because
in Cubase i can't use the "SB Audigy 4 ASIO 24/96" driver, supplied with my Audigy 4 (internal board).
When i set this driver in the Cubase setting i can't see any sound in the input channel, and nothing
can be recorded. While "SB Audigy 4 ASIO" can record but only at 48Mhz...
To record at 96Mhz i MUST set the Asio Multimedia Driver, but the latency time is around 105 ms!!!
The driver 24/96 has only 2 inputs, so i think i don't have to route the I/O anyway
Is there any trick to make it work correctly?
Does anyone work fine with Cubase SX and Audigy 4?
Thank you
Brunocat

Have you tried if the source needs to be set in Surround Mixer instead of Cubase (normally ASIO bypasses the CT Mixer recording settings).
Asio4All will give you lower latencies but not the ASIO functionality.
jutapa

Similar Messages

  • Sound Blaster Audigy and STAL

    I've got the following problem. In game called "S. T.A.L.K.E.R" i can hear very lound sounds of shooting and very silence people conversations.
    I've got "Sound Blaster Audigy" and Creative Speakers.

    Hi,
    There are several choices if it comes to Audigy (emu0kx) drivers;
    First you can use the last official Creative Labs' driver for the Audigy series which you can download on the official driver download site here at Creative Labs' site, but you will loose a lot of apps/softwares, but it should work;
    The second one would be the mentioned Daniel_K's driverpack 3.8 for the Audigy series which works pretty good, although I dislike the individual installers/uninstallers for each applications which makes uninstallation of the driver very annoying.
    The third one would be the Project KX driver which is very light in size but very powerful, especially for recording and other music related purposes. There's a learning curve since it really looks different (interfaces for example), but once you have found out how the KX driver works you will be happy you own an genuine Audigy emu0kx soundcard.

  • Soundblaster Audigy and Windows

    I've just installed Windows XP on a new hard dri've. I'm running an older computer with a 700mhz Celeron processor with an Audigy soundcard. On Windows ME it worked fine, but since upgrading, sounds work fine, but when I try playing music of any kind it locks my machine up so bad I have to shut it down manually. I've tried reinstalling Windows and the soundcard drivers, and nothing works. Is there a known issue with the Audigy and Windows XP?
    I'm greatful for anything you can tell me, I'm at a loss.
    Thank you

    Why bother with Microsoft?
    They didn't even add in 6. in Windows XP
    Seriously, use Creative Speaker Settings.

  • Audigy and ddts-

    After i opened the box today and hooked up the ddts to my promedia 5. ultras....i was very happy. I am running my ps2 into it with a toslink, and it sounds great. I have a audigy regular (mp3 or gamer), and the only setup I can get to work with it is with the digital coax and the converter to /8, HOWEVER, when using the digital coax i do NOT have the option of anything but stereo! I got the ddts mainly for up-mixing my mp3s. Can you get anything else (ie prologic, or neo6? is there a better way to hook them up? I tried using an old cable i had laying around from an old minidisk player that has one side /8th and the other toslink, however I'm not sure if it even works correctly in this application. I tried hooking up from the audigy to the ddts with a /8th to rca, and could not get any sound, except for some buzzing in the center channel. I also recieved today my creative audigy 2 zs notebook, however my dell inspiron 9200 wont get here for a few days . Will I have similiar problems with this? If it turns out my toslink to /8th cable is faulty my plan was to go buy a toslink cable and the /8th converter and use it that way. Will that work properly with my new notebook and/or my current desktop? My goal was to have all three components (ps2, notebook, desktop) hooked up digitally (I love anything and everything 5., including my mp3s). Should I be having this problem with my audigy and the digital coax? Should the /8th to rca work?
    Thanks a lot,
    Mike

    Analog output on the soundcard --> DDTS-100 switchbox
    Switchbox --> DDTS-100 main unit
    Switchbox --> Speakers
    Digital out on the soundcard --> Coaxial input on the DDTS-100 main unit
    The digital output on the soundblaster can ONLY SEND OUT EITHER A PCM STEREO SIGNAL OR AN ENCODED DATA STREAM (AC-3). In order to make the DDTS-100 decode the data stream correctly you MUST have the software set to SPDIF passthrough and also have that set in the Audio HQ or the Audio console. Put the switchbox to decoder mode. The only way to light up the lights of the DTS and Dolby Digital is to feed the main unit with an encoded data stream of those sound formats. If you try to play anything and put it through the digital out that is not DTS or DD you are going to get... Stereo.
    In order to get sound from the side speakers you must first set the switch on the back of the DDTS-100 main unit to 6.1/7.1 and set the upmix to 5.1-->7.1 or 6.1-->7.1 (depending on the source) on the main volume controller of the S750.
    Message Edited by rico01 on 08-17-2005 09:38 PM

  • Conflict between audigy and Olympus voice recor

    I have an audigy se recently installed. Seemed to be working fine until I opened my Olympus voice recorder program. Just opening the program knocked out the sound card and I could not get it back again. No speakers in any application on the computer except the diagnostic test. Then the speakers would play. But no cd's, no wav files, no nothing. Tried checking and unchecking all the boxes. There really aren't that many. Only way to solve the problem was to uninstall and reinstall audigy and not go to Olympus anymore. I've done that several times to confirm that is the problem.
    Any suggestions?
    (5. sourround)

    Bazbear wrote:
    Could anyone help me to resolve the conflict between my Soundblaster Audigy 2ZS and Norton antivirus. The auto protect feature is constantly being turned off on boot up. According to Symantec the problem is caused by conflict between the two soft wares. The Creative page does not mention this at all and the work around on the Symantec site either does not work or entails time wasting closing of programs and re-boots. It is really getting to me now and I wonder if any one knows of a permanent fix?
    Bazbear
    Some past post here mention of this too.....and the mods suggestion does indeed helped some of them resolve it. Perhaps you can try it. What you need to do is uninstall all Norton and Creative software. When you're done with that, install Creative software first follow by Norton stuff.

  • Audigy 2 zs platinum and cubase sx prob

    I bought a creative audigy 2 zs platinum and use cubase vst 2.02.
    I chose creative asio in the vst multitrack window (devices menu).
    the problem is the wave volume level in the creative mixer is not working when i use cubase. with other applications it works fine.
    is "creative asio" the best choice to get low latency?
    any suggestion is welcome_________amd duron ,60 GHz GB RAMXP professional splatest creative driversaudigy 2 zs platinum

    Hi, is anyone able to offe some help? Thanks

  • Audigy 2 ZS Plat Pro and Cubase AI 4 issues

    +? Hello everyone!
    Just wondered if anyone had come across this before?
    I'm just setting up a project in Cubase AI 4 that came with my Yamaha MM6. I've selected Creative ASIO driver, direct monitoring, release into background etc...and I've set up the inputs and outputs (Line In 3 plus Mic).
    When I play the keyboard, I'm seeing the audio registering on the mixer in Cubase, but no sound is coming through my speakers. I've checked that the Creative mixer Line In 3 wasnt muted and tested the speakers, but still nothing.
    However...if the Creative Mixer is open and I maximise it while I'm using Cubase, I can suddenly hear my keyboard..!.*?
    Erm...does anyone know what I'm doing wrong? I have to say that the Creative mixer has always caused me a headache when recording, but that might just be because I'm missing something....
    Cheers
    Kat

    already asked and discussed in the last 3 days.
    http://forums.creative.com/creativel....id=79342#M940
    next time do a search before posting in a new thread, it helps keeping lisibility and finding quicky users with the same interest.

  • Help to configure Audigy2ZS Platinum Pro and Cubase SX2

    Can anyone tell me how to set my Platinum Pro card with Cubase SX2...I'm also having Latency problems recording in 24bit-96hrtz...Should I buy a mixer or is The Audigy breakout box good enough...many questions I know...I hope ye can help me,,,,

    pedrozepelim197 wrote:
    What's the best possible configuration for a Audigy Platinum and Sonar? (bit depth, samplig rate, etc.)
    Driver mode:
    ASIO: (there are not many choices available )resolution: 16-bit
    SR: 48kHz
    latency: on recording ~4-10 ms, on mixing 20-100ms (depending on plugins you have in use)
    WDM/KS (or Asio4All):
    resolution: 24-bit
    SR: 48 kHz or 96 kHz
    latency: Sonar sets it to 10 ms (you can set it bit lower with Asio4All), you can increase it when mixing
    ASIO gives you couple of more inputs for (simultaenous) recording vs WDM/KS (or Asio4All).
    You get more information/'support' from
    Cakewalk -forums
    jutapa

  • Latency and Cubase sx3

    Lads please help me.
    I got Cubase SX3, being the most used professional program at this current time. I can't get rid of latency. I'm using windows2k and a soundblaster Augiy2 Platinum card. I really have to get this problem solved, çause i can't work at this time.
    Who will make me the happiest arranger of today?
    Cookwowz

    Make sure you're using the creative or audigy asio drivers and not the multimedia drivers. Yes, use asio4all it is free and good. I would not advise the use of Sblaster/Audigy cards with high and DAWS like cubase SX3. However, they are generally built for gaming and are excellent for that but it would be best to use a simpler, more dedicated card like the cheap Emus or Maudio Deltas which can be obtained for well under £100 and, using the latest drivers, are pretty rock solid at the moment. If you can afford it the Hercules is rock and easy to set up and has loads of in/outputs.
    Look on the cubase forum for recommendations for other soundcards.
    There is a folder which should be installed in your SX3 folder called "ignoreportfilter" which has a file of the same name and instructions for use and description. You should put this file into your SX3 folder. If it has not been installed look for it on your installation cd or at the Steinberg ftp site which can be found via:
    http://www.steinberguk.com/ look at the top line, goto downloads/pc updates and look for the link to the ftp site under the header near the top of the page then just browse through the folders. You may also find you can update to SX3.01.623 if you haven't already.
    ps: Have you set Win XP Processor Scheduling for "Background Tasks" ? It's vital.
    Message Edited by TexS on 07-07-2005 11:06 PM

  • Is it possible to use an Audigy and Xfi at the same ti

    Hello, this is my first post in the forums.
    I have using Creative soundcards since many years ago, and all of them are working today.
    Now, in my primary there is an Audigy, mainly used with Debian Linux, working wondefully, and some Windows time for games.
    I'd like to use a Xfi, but the promised Linux compatibility is still on the horizon, so, is it possible to install a Xfi along my Audigy, using only the Audigy in Linux and the two soundcards on Windows (Xfi with headphones and Audigy with surround system Creative P580)?
    Will there be a driver conflict of some sort (in Windows) ?

    I'm running into the same problem. While it is possible to create an aggregate device using Apple's Audio MIDI setup utility, the Mac doesn't see both microphones. It only ever sees the second one that's plugged in.

  • Audigy and H

    Hello all,
    I bought an Audigy card yesterday. I'm trying to get audio from my PC into my Sharp Aquos.
    I've got picture through the DVI/HDMI connector but no audio. I'm running a 3.5mm through to 2 RCA connectors into the TV.
    I'm not getting any sound through the TV and i'm pretty sure the problem lies in the card or connectors.
    Does anyone have any ideas as to how to get some sound out of this thing?

    Hello all,
    I bought an Audigy card yesterday. I'm trying to get audio from my PC into my Sharp Aquos.
    I've got picture through the DVI/HDMI connector but no audio. I'm running a 3.5mm through to 2 RCA connectors into the TV.
    I'm not getting any sound through the TV and i'm pretty sure the problem lies in the card or connectors.
    Does anyone have any ideas as to how to get some sound out of this thing?

  • EMU-1616m and Cubase LE Troubleshooting

    Hello, I am sorry if this is the wrong part of the forum for this type of question. However, I just got a 1616m hooked up. The sounds and tones it produces are beautiful. As far as recording goes...I can record the mic level in Cubase LE fine. But, when I hook my guitar to the preamp input in the 1616m and try recording an audio track in Cubase LE, the level is peaked out consistently. Now, I assure you I have adjusted all mixer levels appropriately within Cubase LE, within PatchMix DSP, and the levels on the front of 1616m itself. I also adjusted the pickup volumes on my guitar. Is it the fact that line level is louder than mic level? Thanks for any suggestions...

    -Does the sample rate of the MP3 match the patchmix or Cubase? That distortion might be a sample-clock problem, internal versus external?... I don't know anything else,,, sorry... Make note what ver. of Cubase (VST? from the e-mu software bundle?) you use.. I had similar problems back when I used my EMU 1860m and it was the Cubase software just being flawed. I also had to rethink how I channeled my ASIO or DirectSound drivers (Whatothers there are.) It was odd to see two sets of mixers instead of there being only one. The most straight forward thing to use might be the directsound or soundmapper drivers in Cubase.

  • Audigy and HL2/CSS 5.1 sou

    I have an Audigy ES with the Jan 2th Vista beta drivers. I cannot get true 5. sound from Half Life 2 or CSS... for example when I do the sound test ingame, the 'Rear right, rear left' sound come out of the front speakers as well, which shows it is more like a stereo sound upmixed for all 6 speakers. Does HL2 require ALchemy to get true 5. Or is there no solution at the moment?It is also the same on my Realtek AC97 onboard.

    Hello Deadly,?Go and get ALchemy and install it. then go into the program folder (of ALchemy) and copy the dsound.dll and dsound.ini to your Executable folder. Which should be something like C:/Program Files/Steam/Steamapps/(account name)/hl2.
    Then modify the INI file and put the duratino to 5 and that should fix your problem.
    Tried it on my CSS (not in game but rather the TEST YOUR SPEAKER button) and everything is back to normal after this.
    Hope this helps

  • Audigy and front Mic/Headset connectors at c

    Hello,
    I?m thinking abut buying an Audigy card, but need to know IF AND HOW I may connect the card to the front connectors wich are integrated in my computercase (Mic and Headphone).
    (I dont want any 5 /4 connector panel)
    Please helpMessage Edited by Gork on 05-24-2006 04:35 AM

    I found this information on Creative KnowledgeBase ..
    Sound Blaster X-Fi Xtreme Audio and Sound Blaster X-Fi XtremeGamer feature the Intel High Definition Audio (Intel HD Audio) Front Panel header.
    Bad information is that it's not compatible w/ all front panel connection methods.
    This header follows the standard 2x5pin Intel HD Audio conform layout. It is not compatible with AC97 or Intel-compatible HD Front Panel Audio.
    http://us.creative.com/support/kb/article.asp?l=2&sid=26308
    So, it seems like CT has been partly listening your complains guys!!
    jutapaMessage Edited by jutapa on -29-20060:50 AM

  • Audigy and BA75

    I am trying to use Boston Acoustic BA7500G digital speakers with my SoundBlaster Audigy card. I can't get any sound out of them, but the device is working properly. Has anyone tried this combo before?

    And here is the link to the Intel site for the PINOUTS for your front panel jacks.......
    You can find AC97 and INTEL HD Audio or Azalia
    http://www.intel.com/support/motherb...sb/CS-0585.htm
    Lastly since Creative does not make an adapter for everyone's front panel jacks...... These guys do. I received mine in about four days, and the cable is sturdy.
    www.x-tap.com

Maybe you are looking for