Audigy 4 and TeamSpeak Probl

Hi
After installing Audigy4 with driver, im unable to use TeamSpeak. I get this message;
TDsoundOut.open(directsoundcreate)No sound driver Available
With my old soundblaster li've everything was fine.(Im flying online IVAO/MSFS2004) I tried to uninstall (both TS and Adigy) and Re install, only result was that i also got a;
Could not find/load Keypress.dll
So this is a Mess. Can anyone help is pls, it will be most appreciated ;O)
JP

I'm getting the very same error message. I have fixed it once in the past, but it's been a long time ago and I forget how I did it.

Similar Messages

Xfi and teamspeak proble

i had a audigy 2 zs and i just got myself a X-Fi Fatalty XtremeGamer and im having some issues with the volume. The thing is that i use teamspeak alot and when im using winamp for example and whenever someone speaks the winamp volume goes down a bit (without the bar itself moving though). I actually enjoyed it since it allowed me to chat on teamspeak and to hear some music whithout having to turn the winamp volume everytime, but i just noticed that this actually hapens while im playing Americas Army for example, and when playing matchs and stuff it kinda upsets me to have my ingame sound going down everytime anyone says something on teamspeak.
Any info on hw to solve this would be greatly apreciated. Im actually thinking its somekind of plugin that came with the drivers of the card but until im not sure i wont mess with it.
thx in advance

try unistalling and reinstalling teamspeak because if im not mistakin it loads teh proper codec for teampeak to match your card when its installed!

X-Fi and Audigy 2 ZS Probl

Please forgive me if this question has already been answered but I am having problems with the X-Fi Xtreme Gamer and Audigy 2 ZS. About a month ago, my sound practically stopped working and once I maxed out everything, the sound was very faint. I have the same problem for both of the sound cards and have used different PCI slots as well. I just reformatted hoping that would fix the problem but that hasn't solved the problem at all.?Onboard audio (Realtek on MSI Neo2 Platinum)?works fine but has problems when Creative drivers are installed onto my computer. Has anyone had similar problems? I've tested the other two inputs and the sound is very distorted with other noises but I can still hear the audio. Could onboard and Creative be conflicting with one another or could it be something with my motherboard? Thanks!

<blockquote dir="ltr">One way to find out if the Audigy and X-Fi cards conflict with inboard sound, would to be to deactivate the inboard soundchip through the cmos. I'm hoping you didn't get unlucky and zap both soundcards with an electrostatic charge.[/quote]

Sound Blaster Audigy and STAL

I've got the following problem. In game called "S. T.A.L.K.E.R" i can hear very lound sounds of shooting and very silence people conversations.
I've got "Sound Blaster Audigy" and Creative Speakers.

Hi,
There are several choices if it comes to Audigy (emu0kx) drivers;
First you can use the last official Creative Labs' driver for the Audigy series which you can download on the official driver download site here at Creative Labs' site, but you will loose a lot of apps/softwares, but it should work;
The second one would be the mentioned Daniel_K's driverpack 3.8 for the Audigy series which works pretty good, although I dislike the individual installers/uninstallers for each applications which makes uninstallation of the driver very annoying.
The third one would be the Project KX driver which is very light in size but very powerful, especially for recording and other music related purposes. There's a learning curve since it really looks different (interfaces for example), but once you have found out how the KX driver works you will be happy you own an genuine Audigy emu0kx soundcard.

Soundblaster Audigy and Windows

I've just installed Windows XP on a new hard dri've. I'm running an older computer with a 700mhz Celeron processor with an Audigy soundcard. On Windows ME it worked fine, but since upgrading, sounds work fine, but when I try playing music of any kind it locks my machine up so bad I have to shut it down manually. I've tried reinstalling Windows and the soundcard drivers, and nothing works. Is there a known issue with the Audigy and Windows XP?
I'm greatful for anything you can tell me, I'm at a loss.
Thank you

Why bother with Microsoft?
They didn't even add in 6. in Windows XP
Seriously, use Creative Speaker Settings.

Audigy and ddts-

After i opened the box today and hooked up the ddts to my promedia 5. ultras....i was very happy. I am running my ps2 into it with a toslink, and it sounds great. I have a audigy regular (mp3 or gamer), and the only setup I can get to work with it is with the digital coax and the converter to /8, HOWEVER, when using the digital coax i do NOT have the option of anything but stereo! I got the ddts mainly for up-mixing my mp3s. Can you get anything else (ie prologic, or neo6? is there a better way to hook them up? I tried using an old cable i had laying around from an old minidisk player that has one side /8th and the other toslink, however I'm not sure if it even works correctly in this application. I tried hooking up from the audigy to the ddts with a /8th to rca, and could not get any sound, except for some buzzing in the center channel. I also recieved today my creative audigy 2 zs notebook, however my dell inspiron 9200 wont get here for a few days . Will I have similiar problems with this? If it turns out my toslink to /8th cable is faulty my plan was to go buy a toslink cable and the /8th converter and use it that way. Will that work properly with my new notebook and/or my current desktop? My goal was to have all three components (ps2, notebook, desktop) hooked up digitally (I love anything and everything 5., including my mp3s). Should I be having this problem with my audigy and the digital coax? Should the /8th to rca work?
Thanks a lot,
Mike

Analog output on the soundcard --> DDTS-100 switchbox
Switchbox --> DDTS-100 main unit
Switchbox --> Speakers
Digital out on the soundcard --> Coaxial input on the DDTS-100 main unit
The digital output on the soundblaster can ONLY SEND OUT EITHER A PCM STEREO SIGNAL OR AN ENCODED DATA STREAM (AC-3). In order to make the DDTS-100 decode the data stream correctly you MUST have the software set to SPDIF passthrough and also have that set in the Audio HQ or the Audio console. Put the switchbox to decoder mode. The only way to light up the lights of the DTS and Dolby Digital is to feed the main unit with an encoded data stream of those sound formats. If you try to play anything and put it through the digital out that is not DTS or DD you are going to get... Stereo.
In order to get sound from the side speakers you must first set the switch on the back of the DDTS-100 main unit to 6.1/7.1 and set the upmix to 5.1-->7.1 or 6.1-->7.1 (depending on the source) on the main volume controller of the S750.
Message Edited by rico01 on 08-17-2005 09:38 PM

Conflict between audigy and Olympus voice recor

I have an audigy se recently installed. Seemed to be working fine until I opened my Olympus voice recorder program. Just opening the program knocked out the sound card and I could not get it back again. No speakers in any application on the computer except the diagnostic test. Then the speakers would play. But no cd's, no wav files, no nothing. Tried checking and unchecking all the boxes. There really aren't that many. Only way to solve the problem was to uninstall and reinstall audigy and not go to Olympus anymore. I've done that several times to confirm that is the problem.
Any suggestions?
(5. sourround)

Bazbear wrote:
Could anyone help me to resolve the conflict between my Soundblaster Audigy 2ZS and Norton antivirus. The auto protect feature is constantly being turned off on boot up. According to Symantec the problem is caused by conflict between the two soft wares. The Creative page does not mention this at all and the work around on the Symantec site either does not work or entails time wasting closing of programs and re-boots. It is really getting to me now and I wonder if any one knows of a permanent fix?
Bazbear
Some past post here mention of this too.....and the mods suggestion does indeed helped some of them resolve it. Perhaps you can try it. What you need to do is uninstall all Norton and Creative software. When you're done with that, install Creative software first follow by Norton stuff.

Audigy 2 Value probl

Hi,
I bought an OEM version of the Creative Sound Blaster Audigy 2 Value 7.. It came without a manual or drivers, and I'm having more problems setting it up than I expected, on both Windows and Linux.
Firstly, I don't know where to plug in the CD audio cable from my DVD dri've. The Audiology 2 Getting Started Guide I found online does not help, since the Audigy 2 Value card only has TAD and AUX_IN (no CD_IN or CD_SPDIF). Is there any way at all I can play CDs with this sound card? I tried connecting it to AUX_IN and raising the AUX volume (with alsamixer in Linux), but no luck.
In Windows I cannot even get this far. It does not automatically detect any drivers, and I can't find any drivers for this card on the support site. Which drivers does this card use, and where can I get them?
Many thanks in advance for any help.

I'm with him on the drivers. I would like a definiti've solution from Creative's support on this question. I e-mailed them previously and received nothing but canned responses! Software auto-update gets corrupted when I try to use it. I see no solution listed on these boards. This is ridiculous.
I'll start off by saying that the choice of forum is suitable for your support, Creative. Totally buggy. It erased EVERYTHING I HAD WRITTEN *WHILE TYPING* and often does not display the full posts.
I have been using Creative products longer than most people can remember the name. Started with a SoundBlaster Pro, moved on to a SoundBlaster 32 (6-bit, 32-voices... come to think of it the first decepti'vely named product and also offered no support), probably the first to own a $250 3DBlaster Voodoo II when I was a teen, and finally purchased an Audigy 2 Value. In fact, the only reason I went with the A2 Value instead of a more expensi've card, was because it was the only one of the A2 Series that would fit in my custom SFF. With both Creative customer support and the technical specs backing it up, I purchased this card expecting to receive the same performance as the rest of the Audigy 2 series. The more I read, the more it looks like this may be a rebadged Audigy and that I have been mislead.
Look, I am truly fed up with this. Ultimately I decided on the Audigy line because of the performance it offered in gaming. Previously, I had been extremely happy with my Envy-based Philips Acoustic Edge, which sounded just as good in gaming and offered much richer .mp3 sound and processing for. I mainly just wanted a change. But if losing a few frames in games is all it would take to get better sound and provided drivers, I will not hesitate to go back or use an alternati've. Unless Creative publicly provides working Audigy 2 Value drivers and definiti'vely tells me that the Audigy 2 Value provides the same DSP as the rest of the line, I will no longer support their products by purchasing them ever again. You can pretend not to notice this post, but it will have the same effect.Message Edited by WiCKeD on 02-28-2005 03:44 AM

Problems with Audigy and Yahoo Messenger/Teamspeak/any web speak prog

So, I have a soundblaster audigy with the front input panel thingy with all the different inputs/outputs (forgive my lack of computerness), and I'd like to be able to use the MIC IN 2 input for headset to talk to people online. I can hear myself fine over my own speakers/headphones when I plug a mic in there, but I cannot get any sound to activate when I try Yahoo voice messenger or teamspeak. A clue is....when I tried to plug the mic in to the horrible input on the back of the computer (the tiny /8 one) I did register some sound but only a crackling noise. Is there some setting I need to switch specifically for online transmission?
thanks,
J

ok never mind, I figured it out myself. thanks

Audigy 2 ZS Notebook- Popping and Beeping probl

Hey all, I installed my Audigy 2 zs notebook card today and it seems to work fine except that when using with any media player (have tried Winamp, WMP, mediasource player), i get a horrible beeping/hissing/popping sound at the beggining of most songs and it has frozen my player a few times. Most of the time if I suffer through it and let it play, the noises will cease even when it moves to the next song on it's own, but if i skip tracks, the noise appears again. I am absolutley positi've it is not an issue with my sound files or player programs, as they have all worked perfectly in the past. this is kind of an odd problem and i'm just wondering if anyone has had a similar experience. Thanks.

? A soundfont cannot contain alle drumkits, and it is not nessecary at all. I dont know a soundfont bank wich contains a complete set of drumkits, too. There are only some soundfonts like the crysis soundfont (to big for its "bad" quality) wich have some dummy-drumkits/ entrys or slightly modified sounds for each than usual. If all drumnkits would be stored in high-quality, the soundfont would be huge... Every synth i know uses the standard drumkit, if the chosen one is not existent. This is not optimal, but it will guarantee, that the the MIDI file or Program/ game will work. The KXDrivers wont do this. SO they are not useable for General MIDI. Only for MIDIs and soundfonts fitting together. But thats not the point of General MIDI. CMSS isnt working with these drivers, too. Dolby decoding/ encoding isnt possible with them, either. These drivers are not bad, but if you want a completely working card, KXdrivers are worthless.

Audigy 1 1394 and t7700 probl

Well i have audigy 394(firewire version) and 7. t7700 speakers,my problem is this i can't get to side speakers working properly on one setting they are just aditional fornt speakers on the other setting they are aditional rear speakers is there way around this,and in creative sorround mixer i cant select 7. only 5. but in windows mixer i can select two configs of 7.,is there a chance that i will have 7. sound on my old audigy?
thanks

the card only support up to 5., so or you can do is select 5. on the software end and there is a switch at the speaker sub. make sure that is set to 5. to 7.

SB Audigy Platinum SB0090 PlayCenter3_02_52 and SBAX_WBUP2_LB_2_09_0016 proble

I lost my original software CD's for my Audigy Platinum (SB0090.) I downloaded SBAX_WBUP2_LB_2_09_006 drivers and PlayCenter3_02_52 as per the SB download site. The drivers work correctly. When I try to load the PlayCenter3_02_52 it says it won't work with the drivers (SBAX_WBUP2_LB_2_09_006) and that it must have the newer Li've! drivers.
Frustrating to say the least. Incorrect files and a poor knowledge base make it so hard to install the devices. Can someone help with information on the product and files?
Thanks
Martin

Vielleicht habe ich das auch mit der Installation der Audigy verwechselt. Sorry.
Wenn ich derzeit die Treiber der X-Fi installiere, installiere ich immer die ben?tigten Anwendungen von der Original-CD. Erst danach mache ich die Updates von der Web-Seite drauf - allerdings immer manuell. Das Autoupdate habe ich leider noch nie probiert.
Bei der Audigy und 2 habe ich am Schluss auch immer nur die Treiber installiert, sonst nichts. Die Lautsprecher-Einstellungen habe ich dann einfach mit der Audio-Console vorgenommen. Lautst?rke, Bass, H?hen kann man ja genausogut mit den Standard-Windows-Programm vornehmen, den Sinn der zus?tzlichen Creatve-Programme ging mir zunehmend verloren. Bei der X-Fi kann ich leider nicht alles mit Board-Mitteln einstellen, deshalb installiere ich nun wieder die Software..
An Deiner Stelle w?rde ich alles mal deinstallieren. Dann Original-CD und die heruntergeladenen Updates installieren. So klappts bei der X-Fi wunderbar.
Gr?e
Charles

Audigy SE Mic Probl

I recently got an Audigy SE and plugged in my headphones to the Line-in (Green plug) and the mic to the "Flexijack" (blue plug). Now, my mic is not recognized by Windows. If I try to open Teamspeak. it says I do no have a sound.out device. If I try to test hardware, it does not see the mic. I am sure it is plugged in the correct spot. Furthermore, I went into the mixer and apparently the microphone can be set both as a source and a recording device. Anyway, I went in there and made sure mic was set as a recording device. Whenever it is set as the recording device, I hear a low hiss in my headphones, yet when I switch my mic to the headphone plug, it doesn't pick up on the mic there, either.
So, basically, the card is not picking up my mic, and if I have my mic unmuted, then I hear a hiss in my headphones. Anybody have a suggestion?

Same card, same issue with the mic not being recognised even though the line is swithced off.
There are a lot of issues here posted that go unanswered and unresolved and i think the lack of input or help from creative admins says quite a lot.

Using Skype and TeamSpeak at the same t

Exactly this is what I intend to do. Generally it is possible, some friends of mine using onboard sound are able to speak in Skype and in Teamspeak at the same time.
I myself use a Soundblaster Audigy Gamer - and I *can't* use both applications at the same time. I'm quite sure that it's possible since I once had a SB Li've running Half-Life ingame voicechat as well as Teamspeak at the same time. This is essentially the same: two programs open the same DirectSound input device at the same time.
I haven't found an option in the Audigy driver settings, neither my knowledge database search nor my forum search was a success.
How do I make my Audigy work like this?

*bump*

Problem with iTunes and TeamSpeak

When I listening music in iTunes and I use TeamSpeak to talk with my friends, iTunes sound fail.
iTunes is incompatible with TeamSpeak, so I want to know if you can make a patch to this.
TeamSpeak Website
www.goteamspeak.com
Regards.
Emilio Jéldrez

Try changing the Audio Out option in the Quicktime Control Panel. See if you can change it to use DirectSound or something similar. Try all of them, in fact. One of them might work.
If this doesn't help, then you're probably going to need to get TeamSpeak to update their product.

Audigy 4 and TeamSpeak Probl

Similar Messages

Maybe you are looking for