Audigy 4, digital out would not work, now external box does not power
I recently purchased a audigy 4 sound card. At first it was almost as if there was a loose wire somewhere. Sometimes the external break out box would power up and sometimes it would not. There was no loose wire and it now no longer powers up at all. The only thing that was worse than the intermittent power up was the digital out on the box. First of all I was told that you could use the spidf out on the box to a receivers digital in, this never worked now matter what settings I tried. I was then told to try the mini out. So I went and bought a mono mini out, that was a joke, didn't fit right rarely worked. I then went and bought a mini stereo plug to RCA out, that fit right and worked a few times, It no longer works at all.
I had the settings set up correctly with the spidif passthrough.
Has anyone else had any problems getting the digital out to work with a receiver?
The analog works fine, but just like the audigy mp3 the bass output for my sub is weak and almost nonexistent. I have a nice hifi/ht system I am trying to get this card to work with.
hello there!
i have the same problem - when i use the equalizer i can save a preset without problems,
but if i reboot the pc i first have to open the equalizers window to make the equalizer work. without having opened the equalizer window it seems to be not activated.
does anybody have an idea how to fix that problem?
greetz,
doolak
Similar Messages
-
in iTunes 11.1 (I26) , I cannot find how to delete podcast listings showing undownloaded podcasts. Delete does not work. Option Delete does not work. Dragging to the trash does not work. Under Edit, Delete is greyed out. Mac OS 10.6.8.
Tom at the Genius Bar told me that Option Delete would work. It does not.
I had to upgrade to iTunes 11.1.(I26) because it is required with OS7 on my iPod Touch (5th Gen). I have tried shutting down iTunes, then shutting down the entire system. This is the first in many visits that the Genius Bar gave me a solution that did not work.
This is a big awkward computer locked to my desk. I would rather not unlock it and then carry it through a shopping center to the Genius Bar if i can avoid oit.
When I installed iTunes 11.1, I discovered that Ihad to resubscribe to virtually all of the podcasts that I had previously been subscribed to. That was a surprise.Hello Achates:
I did not read the rather long post. If you wish to reinstall OS X 10.4, use your software install DVD. Backup is essential. To minimize your risk, I would use an archive and install:
http://docs.info.apple.com/article.html?artnum=107120
In that way, you will have a fresh copy of OS X and your current settings will be preserved.
Incidentally, I do not agree that the printer problem is best solved by reinstalling OS X. I have had HP printers for sometime and, on one occasion, had difficulty after an upgrade. HP technical support walked me through uninstalling all traces of the HP driver and then reinstalling.
Barry -
i am new to mac air. Today i installed (unsuccessfully!) MAPLE16 on my mac book air. Now since it does not work properly (it also does not appear in applications) i decide to delete it. I could not remove it from launchpad . i need urgent help from your side.
Any third-party software that doesn't install by drag-and-drop into the Applications folder, and uninstall by drag-and-drop to the Trash, is a system modification.
Whenever you remove system modifications, they must be removed completely, and the only way to do that is to use the uninstallation tool, if any, provided by the developers, or to follow their instructions. If the software has been incompletely removed, you may have to re-download or even reinstall it in order to finish the job.
I never install system modifications myself, and I don't know how to uninstall them. You'll have to do your own research to find that information.
Here are some general guidelines to get you started. Suppose you want to remove something called “BrickMyMac” (a hypothetical example.) First, consult the product's Help menu, if there is one, for instructions. Finding none there, look on the developer's website, say www.brickmyrmac.com. (That may not be the actual name of the site; if necessary, search the Web for the product name.) If you don’t find anything on the website or in your search, contact the developer. While you're waiting for a response, download BrickMyMac.dmg and open it. There may be an application in there such as “Uninstall BrickMyMac.” If not, open “BrickMyMac.pkg” and look for an Uninstall button.
You generally have to reboot in order to complete an uninstallation.
If you can’t remove software in any other way, you’ll have to erase and install OS X. Never install any third-party software unless you're sure you know how to uninstall it; otherwise you may create problems that are very hard to solve.
You may be advised by others to try to remove complex system modifications by hunting for files by name, or by running "utilities" that purport to remove software. I don't give such advice. Those tactics often will not work and maymake the problem worse. -
Since updating iPhoto it has ceased to open. I have tried to Hold down the Command and Option keys on the keyboard which is the suggested solution to then open a suggested solution to rebuild the library, but it does not work. iPhoto still does not open. can someone please help?
thank youTry the following:
1 - delete the iPhoto preference file, com.apple.iPhoto.plist, that resides in your
Home/Library/ Preferences folder.
2 - delete iPhoto's cache folder(s):
Home/Library/Containers/com.apple.iPhoto
and, if there is one, the
Home/Library/Caches/com.apple.iPhoto folder
3 - reboot, launch iPhoto and try again.
NOTE: For Mavericks, 10.9, go to your Home folder and use the View ➙ Show View Options menu to bring the this window:
Happy Holidays -
My iPhone 6 panoramic camera does not work properly: the arrow does not turn when i turn my phone. Furthermore sonetti da my Keyboard does not turn as well. What do you think si the problem?
Furthermore my keyboard does not turn sometimes as well
-
ATT hooked up the new U-verse router replacing the older 2wire router. Old 2wire router worked fine with Airport +Time Capsule. Now only the amber light flashes. When I try to reconnect with Time Machine it does not find the Time Capsule nor does the airport utility find the Time Capsule. Any help?
Okay, the 3801HGV also doesn't bridge - but there is a workaround. Info on the workaround comes from 'SomeJoe7777' at this link:
http://forums.att.com/t5/Residential-Gateway/U-verse-for-BUSINESS-2Wire-3600HGV- bridge-mode-or-another-AT-amp/td-p/2707013
As for connecting to your TC: the 3801HGV uses a default IP address of 192.168.1.254. It passes out IP addresses to your networked devices, and all of those IP addresses will be 192.168.1.something. The TC uses a default IP address of 10.0.1.1. As your primary router, if the TC's defaults weren't changed, the TC would be handing out addresses to your networked devices that are 10.0.1.something.
If your computer has an IP address of 192.168.1.something, it won't be able to see the TC if the TC's address is 10.0.1.1 (or anything else that's not 192.168.1.something). Hopefully that makes sense!
Go into System Preferences on your Mac, and click the Network icon. Click on Ethernet on the left side, and you'll be able to see what IP address your Mac has been given. My guess is that it has a 192.168.1.something address from the 3801HGV.
If I'm right about the 192.168.1.x address, and that your TC is running with 10.0.1.x addresses, then that's why your Mac can't see your TC. In this case, you need to change the Mac's Ethernet setup to manually set your Mac to a 10.0.1.x address for the TC to see. To do this, go to System Preferences, then Network, then click Ethernet on the left side.
Set the Configure IPv4 dropdown to 'Manually', and it will open up some places for you to fill in information:
IP Address: 10.0.1.15 (or a similar number that won't conflict with your TC's address, but starts with 10.0.1)
Subnet Mask: put in 255.255.255.0
Router: 10.0.1.1 (I'm assuming here that your TC was running with the default IP address; if it was something different, then set Router to whatever IP address your TC was using.)
Then, click the Apply button to make your changes active.
Now, since your Mac's IP address will be in the right "subnet" for your TC, they should be able to see each other. (It's kind of like having to live on the same block as someone to be able to talk with them. In general, if your computers don't have similar addresses, they can't talk to each other. Of course that's simplified greatly, but you probably get the idea...)
Once you've got the IP addresses matched up, you should be able to see your TC. At that point, you can update the TC to work with the 3801HGV. I recommend setting it to bridge mode, but if you can follow SomeJoe7777's advice, go for it! -
I have update ios5.1 now wifi does not working and wifi hotspot does not displaying in setting
Dear All,
I have update ios5.1 last week on my iphone4 16GB. Now Wifi is not working and Wifi Hotspot not displaying in setting menu.
Pls help. What can i do now
SenthilCan you tap the little "i" in the blue circle and "Forget this Network"
-
T530 Lenovo Integrated Camera not working, Lenovo Camera Settings does not Display
Hello, I have a new T530 with Windows 8 OS. I am having trouble using the integrated camera. It functions neither in the Windows camera app nor in Skype. In both cases I get a picture with a gray background and a camera with a line through it. In Device manager, the camera does appear, is enabled, and the drivers are up to date.
After looking through other threads, I tried checking whether the camera was plugged in and indeed it was. When using Skype and I set the camera to on (Skype did detect the camera), I still got the gray no camera image, but the green light on the camera itself turned on.
I also tried using Fn+F6 to check settings. Lenovo settings opens, but the when I click the camera settings Icon, the screen loads a blank page that says "Camera" in the top right and has a back button (left pointing arrow) in the top left hand corner. The back button does not seem to work and I must change the window to something else in order to exit/close settings.
I tried manually installing both camera drivers and "power management" ("energy management"?) drivers. Neither of this solved either of these issues.
Please help me to resolve this problem. Thank you.Hi, euterpenc
I would make sure that the BIOS is up to date in the system. The current BIOS for your system is 2.07 and can be found here. Also, I would ensure that the chipset drivers are up to date, and those can be found here.
Hope it helps, and let me know how it goes
Adam
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution!" This will help the rest of the community with similar issues identify the verified solution and benefit from it. -
Adobe photoshop cs2 download on adobe website does not work- the serial number does not work?
photoshop cs2 download on adobe website does not work - the serial number given isn't recognised when you enter it when trying to install. the live chat at adobe cannot help and suggested that I may find the answer here. Can anyone help with this?
Adobe has decommissioned the CS2 activation servers, so your old serial number is no longer usable.
If you download the special non-activating version of CS2 that Adobe has made available to licensed CS2 users, you MUST also use the new serial number provided by Adobe on that download page:
https://www.adobe.com/cfusion/entitlement/index.cfm?e=cs2_downloads
That S/N does work. I double checked. -
My right click is not working and producing the context menu or ability to drag files and folders. I just spoke with a phone support person and we checked that all the mouse/trackpad options for right click were correct and checked.
Please can you help with this.
It has only just happened in the last few days.
Many thanksYou might want to update your profile so that we can see what model iMac you have and what version of OSX you're running.
For this question, it might help to know if you're dealing with a trackpad, Magic Mouse, or something else?
(Until your issue's resolved, you can Control-Left Click to get the right click functionality). -
My Ipod is not working, It was working find and suddenly it does not turn on anymore. It does not responde when it is plugged in. I can see it is not the first case, somebody has received an answer that works? Some similarities in the ipods? thanks for your help.
Have you tried a reset?
iPod touch User Guide (For iOS 4.3 Software) -
Finder & Dock do not work - Mac Hard Drive does not appear on Desktop
Until yesterday, my powerbook was working properly.
This morning, I wanted to use it and I had the following problems after login.
1/ My Mac Hard drive does not appear on my dekstop
2/ My dock appears but no icon works when I click on them. So, I can't open finder. I have no response.
3/ Furthermore, my top bar (with clock, login name, Airport icon...) appears but it is frozed.
I try several solutions as :
- rebooting in safe mode,
- rebooting, with in the same time, hold different keys (option, apple, p & R)...
As of today, no solution works.
Thanks for your help.A.CHAMP wrote:
Nota: if i used my daugther login (she is not admin), I have the same issues.
Ok, that's good enough. You may be able to repair this with the 10.5.8 Combo Update This is a fuller install, as opposed to an incremental "delta" update so it should overwrite any files that are damaged or missing. It does not matter if you have applied it before.
Remember to Verify Disk before update and repair permissions after update from /Applications/Utilities/Disk Utility.
EDIT:
I have around 5 Go space left on my Mac
Also, your getting very low on disk space. Try to copy some of the data off to other media. *Do it before you try applying the combo, you'll need the space.*
-mj
Message was edited by: macjack
Message was edited by: macjack -
FireFox 4 Windows 7: Edit/Find does not work. Find Bard does not display.
Edit/Find or Ctrl-F does not work. The "find bar" is not displayed.
It is possible that the screen is too wide or too high and that the scroll bars and Find bar fall off.<br />
Open the system menu via Alt+Space and see if you can resize that window.<br />
If that works then close Firefox to save that setting.
See also:
* http://kb.mozillazine.org/Resizing_oversize_window
See also:
* http://kb.mozillazine.org/Corrupt_localstore.rdf -
Go - Connect to Server does NOT work - The text entered does not appear to
Two Macs with Mac OS X 10.5.2. Both migrated from Mac OS X 10.4.11. One Mactel and one PowerPC. I can see the former from the latter, but not the latter from the former:
Go/Connect to Server
gives this error all the time for all listed servers:
The text entered does not appear to be a recognized URL format
This does not help:
Mac OS X 10.5: "The text entered does not appear to be a recognized URL format" alert when connecting to server
http://docs.info.apple.com/article.html?artnum=307256
Any idea how to fix it? Thanks.At this point I think you should get Applejack...
http://www.versiontracker.com/dyn/moreinfo/macosx/19596
After installing, boot holding down CMD+s, then when the prompt shows, type in...
applejack AUTO
Then let it do all 5 of it's things.
I'd do it on all of them.
Then we can go on from there if you still have a problem, but with several queastions eliminated! -
is there something else I can do to get Pandora to play again?
The option to update without the computer (Over the air) was made available with iOS 5. If your iDevice is using a version of iOS lower than 5, you will need to use iTunes on your syncing computer to perform the upgrade. Use the Apple link below as a guide for the upgrade.
http://support.apple.com/kb/HT4972
Also read the instructions from the section entitled "Update your device using iTunes" at the link below.
http://support.apple.com/kb/HT4623
Information regarding transferring purchases from your iDevice to iTunes on your syncing computer can be found at the link below.
http://support.apple.com/kb/ht1848
Maybe you are looking for
-
Hi im trying to understand z index and i cant make it work, why i doesnt work? Adobe Creative Cloud
-
Everytime a HU is moved (within warehouse) or Putaway-Picked is there a history maintained in SAP for this? Is HUMO the only transaction to view this? Which tab in HUMO details.
-
In spool 2 pages shows when i take print
Hi Experts, I have created sap script for payment print prog and for that i use standard prog RFFOUS_C. everything is fine, but when i take print this check printing so it comes 2 pages, and in spool also shows 2 pages, in second page some additional
-
I'd like to be able to see my files without having to open them - I used to be able to see them but somewhere a setting changed and I can't figure it out! When I go to properties everything looks the same with jpg's that I can see and jpg's that show
-
I need assistance measuring the phase difference between two digital signals (0 to 5 volts). The signals are angle outputs of a rotating torque sensor. All of this is for the purpose of tracking the angle of rotation as I measure torque. Normally, I