Audigy 4 EAX Control Panel - ORIGINAL SOUND ALWAYS HEARD NO MATTER W

I'm using an Audigy 4. On XP, would?use EAX to normalize the wave output signal when participating in an online meeting. I would add a Normalizer and then turn down the original sound. On Vista, the original sound is ALWAYS heard even if I set it to -infinity?the Master Tab and also Wave setting of the source tab. The normalizer MIGHT be working, but I can't tell because the original sound is still heard, and so it doesn't not seem that the normalize is doing anything.
This seems like a driver bug. Is there ANY way to make the Original Sound silent so that only the signal passed through the Normalizer is heard? This worked fine in XP, but not Vista. Again, I'm using an Audigy 4. Thanks,?J.Message Edited by JReality on 05-29-20070:2 AM

bump!

Similar Messages

Audigy FX Control Panel does not recognize my card

I have Windows 7 Pro, 16gb Ram, Intel i5-2400 processor. I just installed my new Blaster card and software two days ago.
When I click the Taskbar icon for the Audigy FX Control Panel, I get the message "The current selected audio device is disabled, not present, not supported by the application, or has unplugged jack connections".
When the Control Panel does open and I click on Menu and select Audio Device Selection, I get the message "There is no supported audio device available".
When I go to Control Panel>System>Device Manager>Sound, video and game controllers>Sound Blaster Auditgy FX>Properties it shows "This device is working properly."
Today, Windows Update included the following:
Creative - Audio Device - Sound Blaster Audio Controller
Installation date: ‎12/‎18/‎2014 1:17 PM
Installation status: Successful
Update type: Optional
Creative Audio Device software update released in November, 2014
More information:
http://sysdev.microsoft.com/support/default.aspx
Help and Support:
http://support.microsoft.com/select/?target=hub
SB Audigy FX Control Panel still does not recognize my card after this update. Help please.
Screen shots.
soundblaster_error.jpgsoundblaster_audigy_properties.jpgsoundblaster_properties.jpg

Originally Posted by SHS
My question no you mean you I don't understand my answer
HTML Code:
<This sentence makes no sense>
It simple you shouldn't have install those windows update driver
HTML Code:
<How would I know that?>
The simple fix is to uninstall the Sound Blaster software from the Control Panel and then re-install it that should fix the problem.
HTML Code:
<Done. Did not fix the problem>
OK, so you don't understand my original post. I installed the card and software two days ago, 12/16/14. The problem was present at that time. Then today at 1:47pm, I installed the Windows update. The problem persists, that means I still have the problem. The problem exists BEFORE and AFTER Windows update. I did follow your suggestion and uninstall and re-install the Audigy FX software and STILL have the problem.

Sound Blaster Audigy Fx control panel app won't run

Just installed a new Audigy Fx PCI card into my Windows 7 (64 bit) system and I have sound however I can't run the control panel app from Sound Blaster. When I run it the system becomes extremely slow and unresponsive, even the mouse is hard to move and the app never opens an interface, I have to kill it with task manager. I have uninstalled all other audio interfaces that I can find, and disabled a few ones, and disbaled in BIOS the on board audio.
In Device Manager I see the following audio devices
Sound Blaster Audigy Fx
Sound Blaster Audio Controller
ATI High Definition Audio Device (X) - I disabled this, I believe this is part of my display card
Why are there 2 sound blaster drivers ? If I disable one both are removed from the list.
Does anybody have any ideas on what to try next ?
thanks,
-- john

Same problem here too, open the control panel, windows 7 32 bit and I have the ALPHA headset. Opened the control panel with all the "nifty features" and bam, freezes every time. I'd rather not be told to go seek support by writing out a nice application since the problem is obviously affecting many of us, more to the matter, I'd like to know if there is any fix or workaround at the moment? If not, I'd like to know if there's going to be a software update for it perhaps?
I'm pretty sure we'd all like answers soon please. Once again, do not direct me to the support tab, it's obviously been submitted a few times now and still nothing has been said about it, we need solid information and it is the one thing wrong with this headset.
Thanks.

Creative Sound Mixer / EAX Control Panel-Audio HQ Sect

After updating my Creative LABS Sound Blaster, I now have a problem with the [color="#cc3333">Reverb & Chous effects. The sliders no longer increase or decrease the number sequence, meaning from number (0) zero to whatever the highest number is. It now only shows [color="#cc3333">NaN dB, no matter where I position the slider. What is NaN dB? It did work once before, for a long time. Any help out there would be appreciated. ThanksMuzikmaker43

I recommend you do a full UNinstall and then use the Driver Cleaner 3 utility to remove any residue dll's etc. You can search google for the cleaner.
Once you have done this reinstall and update. Let us know the results.

EAX control panel for the Ext

Is there one?
If so where can I find it please
Thanks

Having similar problem. Loaded Windows successfully using Boot Camp and loaded Mac drivers that were created using Boot Camp. The screen resolution under Windows is stuck at lowest resolution and figured out, from scanning tthis forum, that Windows did not read - or Boot Camp did not load - the driver for the ATI 1900 XT. So I went to ATI web site and downloaded the driver there, but when I try to install that in windows it gets about halfway and then I get Error 0x80040707; Description: Dll function call crashed: ISLAYER, ISLIsATICard. I sent an email to Microsoft for help but would prefer to fix the problem before the end of 2007 so I am asking here for suggestions.

Virtu Control Panel stuck in Trial Mode

Hi,
I’ve built a system based around an MSI Z68A-GD55 (G3) motherboard, Intel Core i5-2500K processor and MSI GTX 570 TwinFrozR graphics card. Upon installing Windows 7 x64 Home Premium I installed all the appropriate drivers and the Virtu Control Panel. When I open the Virtu Control Panel it is always stuck in Trial/Evaluation mode so I can’t edit the OSD settings, Add a custom application, Edit an existing application or delete and application entry. I have tried uninstalling and reinstalling the Virtu Control Panel and downloading the driver directly from the LucidLogix.com website, each time with the same result. I’ve also tried putting my motherboard in i-Mode and d-Mode, each time with no change (with the exception of the Application list changing in d-Mode) – I’ve also tried disabling and re-enabling Lucid Virtu support on the motherboard.
Also, there is a file called lucid.log on my C: drive containing the following:
TID:1852, 10/07/11, 10:54:00, LicenseData.cpp:184 - Warning code: 0
TID:1852, 10/07/11, 10:54:00, LicenseData.cpp:184 - Condition: ret, can't find SoftKey.txt in current dir (maybe it's ok and there is not SoftKey, will check bios)
Any ideas guys?
My complete system specification is as follows:
Motherboard: MSI Z68A-GD55-G3
Motherboard Driver: Intel Chipset Driver 9.2.0.1030
Motherboard Chipset: Intel Z68
Motherboard BIOS: 23.2
CPU: Intel Core i5-2500K 3.30GHz
Memory: Corsair XMS3 8GB (2x4GB) DDR3 PC3-12800C9 1600MHz Dual Channel
Memory Latency: 9-9-9-24
PSU: Antec TruePower New Modular 750W
Graphics: MSI GeForce GTX 570 OC Twin FrozR III Power Edition
Graphics Driver: NVIDIA 280.26 WHLQ
Sound Card: Creative X-Fi Xtreme Music
Sound Driver: 2.18.0015
Operating system: Windows 7 Home Premium x64
Thanks,
Kona
Edit: I've just found this in the Virtu Control Panel install guide, do you think it can't find the Lucid BIOS Certificate on my motherboard? What could cause this?
- This version is a production version and will have no time or functional limitations if motherboard has the approved Lucid BIOS production certificate installed.
- If motherboard does not have Lucid BIOS certificate or a certificate is not approved for current software package, this version will stop working in 30 days after installation and also display the product logo of different sizes in different locations of the screen during runtime. Adding/editing arbitrary application to the support list will be disabled.
Edit 2: I've read the other threads of people with this issue, and by the looks of it I need to wait for MSI to release a BIOS update - to me this isn't acceptable to release a motherboard with a completely gimped feature, when it's advertised as a feature of the board. I've already submitted a support case, what do you think the likelyhood of MSI sorting this out within the next week?

Quote from: Svet on 08-October-11, 02:01:08
Remove current Virtu Control Panel/Driver & software with "Your Uninstaller!":
http://www.ursoftware.com/download.php
[which removes any registry entries and files that can be left assotiated with corespond sofware]
when its done, reboot machine and then install the Virtu from msi web again:
http://www.msi.com/service/download/driver-17057.html
Hi Svet,
Thanks for your reply.
I've done as you requested (although I will point out that Your Uninstaller contains a Toolbar which is flagged as Spyware...) and uninstalled Virtu with Your Uninstaller:
And then I re-installed the version of Virtu Control Centre from your link (it's the same as I downloaded earlier but I re-downloaded it to be sure...), and exactly the same happens:
HU16E, I think your correct. Reading the other issues with the missing Certificate/License on the BIOS has plagued a few other MSI motherboards but has been fixed with BIOS updates - I've submitted a support request to MSI but haven't heard anything back yet. I can't beleive they can/would miss something like this out, it's an integral feature of the Z68 chipset!
I might see if the retailer I bought it from will accept it back for a refund, I'll either get an ASUS or the GD80, unless someone can suggest anything else or MSI come up with a BIOS update sharpish!

Hdmi output not found under playback in the control panel

I am trying to get sound to go through my tv with my HDMI cable. I looked in the control panel under sound - playback. I do not see the option of the hdmi output. I have right clicked on the speaker and clicked disabled and it still does not come up.
I have idt high definition audio codec driver on my computer. Is it compatible?
I have also tried to connect an rca cable to the headphone jack and hook it to the tv like that and sound still didn't work?
Do you have any suggestions?

Hi again tfinley,
It is good to hear back from you!
Since you have updated all of the original drivers on your system, and your notebook still does not display an HDMI audio option, I recommend returning your system back to a previous restore point when this option was available. This can be done by following the steps in this document on Using Microsoft System Restore (Windows 8).
Should the problem continue, I suggest performing a backup and recovery of your operating system. This can be done by following the steps in this resource on Backing Up Your Files (Windows 8), as well as Performing an HP system recovery (Windows 8). This should return your system back to factory defaults.
If the issue persists, please call our technical support at 800-474-6836. If you live outside the US/Canada Region, please click the link below to get the support number for your region.
http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html
I hope this helps!
Regards
MechPilot
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

No Control Panel? Windows 8.1

Hey,
I just upgraded to windows 8.1 pro 64bit but i don't get the option to install the control panel.
Sound card: PCI Express X-Fi Titanium Fatal1ty Pro Series
I installed these drivers:
Creative Sound Blaster X-Fi Titanium stuurprogramma (for windows 8.1)
Creative ALchemy 1.45.01
On windows 7 64bit i didn't have this problem.
I just had to install this driver:
Creative Sound Blaster X-Fi Titanium stuurprogramma 2.17.0008
And during the installation i got the option to install like 8 different programs to install for my soundcard including the Control Panel wich i pretty much only care about
For the windows 8.1 driver i got the option to only install 3 programs in installed them all but no control panel.
driver.jpg
I dont understand this, did they not make a control panel for windows 8.1?
Thanks allot!

Originally Posted by dylan1990
Hey,
I just upgraded to windows 8.1 pro 64bit but i don't get the option to install the control panel.
Sound card: PCI Express X-Fi Titanium Fatal1ty Pro Series
I installed these drivers:
Creative Sound Blaster X-Fi Titanium stuurprogramma (for windows 8.1)
Creative ALchemy 1.45.01
On windows 7 64bit i didn't have this problem.
I just had to install this driver:
Creative Sound Blaster X-Fi Titanium stuurprogramma 2.17.0008
And during the installation i got the option to install like 8 different programs to install for my soundcard including the Control Panel wich i pretty much only care about
For the windows 8.1 driver i got the option to only install 3 programs in installed them all but no control panel.
driver.jpg
I dont understand this, did they not make a control panel for windows 8.1?
Thanks allot!
Hi dylan1990,
You may want to reinstall the drivers again. From the details section, it did mention that the driver includes Creative Audio Control Panel in Win 8.1.
Hope the suggestion works for you.

Tactics 3D alpha headset control panel doesnt want to start!

First of all the USB thingy isn't working... no sound is heard no matter I plug it in usb 3.0 2.0 front back ports...
Asrock Extreme 6 P67 Motherboard. Windows 7 x 64 ultimate
When I plug the 3.5 jacks it works fine, well the sound atleast, Though the controll panel still says not detected!
Installed this driver: SBTA_PCDRV1_WIN8_LD_1_01_0001
The audio device supported by this application cannot be detected. This application will now close..
Can someone please assist thank you.
Or I will have to return this product.

First, thanks for your help.
Here are the options I have for playback devices:
Speakers
Headphones (Used when headset is attached via jack -- issue is present)
Digital Audio (S/PDIF)
Digital Audio (HDMI)
Headset (SB Tactic3d Alpha) (Used when headset is attached via USB -- issue is present)
And for recording devices:
Microphone (3.5mm jack) (Used when headset is attached via jack -- issue is present)
Microphone (Internal laptop microphone)
Headset Microphone (SB Tactic3d Alpha) (This setting is used when the headset is attached via USB -- issue is present)
The headset does not act just like a normal headset. It has not been working since I purchased it, unfortunately, and I did try to connect it after a system restore without the USB attachment. The default settings are for the speaker and internal microphone, but in order for sound to play out of the headset I have to set it as the default, either as "headphones" or "headset" regardless of how it is attached to the computer. I did not have to do this with my previous headset, and my old headset did not have this issue.
Also, if I remove the microphone and mute/unmute the headset microphone with the in-line switch, it registers as noise in the sound settings menu. I suspect that there's something wrong with the wiring at the in-line controller.

Office 2013 64Bit on WIN 8.1 64bit MAIL control panel

Hey guys I found out that after installing Office 2013 home and business (64bit office only) on a windows 8.1 pro 64bit the mail options in the control panel will not open or come up to create new profiles. This seems to only happen with the 64bit version
of office 2013 on windows 8.1.
I think this only happens after already configuring a exchange account rebooting and then trying to open mail from the control panel. it doesn't seem to matter if you are a admin or not. For the time being those with the same issue as me just remove the
old profile from the registry or make changes to the profile via the registry
HKEY_CURRENT_USER\Software\Microsoft\Office\15.0\Outlook\Profile
again this is only an issue on the 64bit version of office 32bit works fine
http://WrinkleFreeIT.com/

Backup up your registry first.
This is impossible to fathom a new install of Windows 8.1 with Office 2013 and the control panel mail app will not open. Client believes you're a complete dill!
The problem we needed to solve was to create 2 exchange email accounts with profile options on outlook start up. We couldn't create the second account while outlook was running and control panel mail would not respond.
This is how it worked for me. Created the first email account by starting outlook and providing the account information during the initial setup of the exchange account.
But what about the second account. Have to start the mail from control panel.
Navigate to HKCU\Software\Microsoft\Office15.0\Outlook
Select DefaultProfile and delete the name of the profile.
Next navigate to HKCU\Software\Microsoft\Exchange\
Create a Key and name it Client
Navigate to Client and create a key and name it Options
In Options add a new String Value and name it PickLogonProfile
Press Enter and set the value to 1
Start Outlook and you will be prompted to select a profile or create a new profile. Hooray!
If there are any corrupt profiles that present while selecting a profile in outlook, then navigate to HKCU\Software\Microsoft\Office\15.0\outlook\Profiles and delete corrupted profiles.
Good Luck.

Sound Blaster Z is missing EAX environment effects in the Control Panel

Sound Blaster Z is an incredible card, and environment effects are the most important thing I look for.
Sound Blaster Z supports EAX 5.0. So where did the EAX settings in the SBX Pro Studio Console go?
For example, I'm unable to choose "Concert Hall" or "Stone Corridor" or "Amphitheater" environmental effects.
Was this intentional? Should I buy a Sound Blaster X-Fi card? As far as I know, X-Fi cards are not missing EAX settings in the control panel. But it really doesn't make sense that Sound Blaster Z is missing EAX settings in the control panel if it is a more advanced sound card and supports EAX 5.0.
Attached Images
image2.jpg
(59.9 KB, 15 views)

Hello Carlo . I have 2 sound blaster card in PC. X-fi titanium fatality and ZxR. My Windows is 8.1 64bit and i install Creative_alchemy_1.45.02 and EAX 5.0 effects works great on both soundcards.. But you need configure Alchemy to .exe files of games. Hope this help.. https://www.youtube.com/watch?v=QLj9obfMppk

*FIXED* No sound and 'No Audio Device' in Control Panel. *FIX

I?m having a problem with my sound. Basically all I get is a system sound, which means no sounds from itunes but the error prompt sounds still play. I?m tempted to say that this is a detection issue because of several things:
-First, when looking in the ?sounds and audio devices? in the control panel I get grayed out selections and a ?no audio device?.
-Secondly, when running the directX diagnostic tool (typing ?dxdiag? in the ?run? window) I get several troubling indications. First under device I have no manufacturer or product ID. Second under drivers I have (copied from dxdiag text file):
Driver Name: ctaud2k.sys
Driver Version: 5.2.000.96 (English)
Driver Attributes: Final Retail
WHQL Logo'd: Yes
Date and Size: 8//2006 4:45:38, 499584 bytes
Other Files:
Seems hunky-doorey but then I have a note at the bottom that reads:
Sound Test Result: Failure at step 3 (DirectSoundCreate): HRESULT = 0x88780078 (No driver)
I have seen another similar post that seemed to have the same problem, but they didn?t provide much information and the fix was to pull out the audio card, run start up, turn it off, and then put it back in and run start up. If this is what needs to be done, could I have a picture or something of what the sound card looks like?
This problem started when I tried to update my sound card and since then my sound has been? possessed? or prone to working at sometimes and then (most of the time)failing at others.
Here is the dxdiag.txt file without the lengthy directShow filters and directx components:
System Information
Time of this report: 5/9/2007, 2:8:45
Machine name: GURU7892COMPUTE
Operating System: Windows XP Home Edition (5., Build 2600) Service Pack 2 (2600.xpsp_sp2_gdr.070227-2254)
Language: English (Regional Setting: English)
System Manufacturer: Dell Computer Corporation
System Model: Dimension XPS
BIOS: Default System BIOS
Processor: Intel(R) Pentium(R) 4 CPU 2.80GHz (2 CPUs)
Memory: 022MB RAM
Page File: 436MB used, 2026MB available
Windows Dir: C:\WINDOWS
DirectX Version: DirectX 9.0c (4.09.0000.0904)
DX Setup Parameters: Not found
DxDiag Version: 5.03.2600.280 32bit Unicode
DxDiag Previously: Crashed in system information (stage 3)
DxDiag Notes
DirectX Files Tab: No problems found.
Display Tab : No problems found.
Sound Tab : DirectSound test results: Failure at step 3 (DirectSoundCreate): HRESULT = 0x88780078 (No driver)
Music Tab: DirectMusic test results: All tests were successful.
Input Tab: No problems found.
Network Tab: No problems found.
DirectX Debug Levels
Direct3D: 0/4 (n/a)
DirectDraw: 0/4 (retail)
DirectInput: 0/5 (n/a)
DirectMusic: 0/5 (n/a)
DirectPlay: 0/9 (retail)
DirectSound: 0/5 (retail)
DirectShow: 0/6 (retail)
Display Devices
Card name: RADEON 9800 SERIES
Manufacturer: ATI Technologies Inc.
Chip type: RADEON 9800 PRO AGP (0x4E48)
DAC type: Internal DAC(400MHz)
Device Key: Enum\PCI\VEN_002&DEV_4E48&SUBSYS_3002002&REV_00
Display Memory: 28.0 MB
Current Mode: 52 x 864 (32 bit) (75Hz)
Monitor: Plug and Play Monitor
Monitor Max Res: 600,200
Driver Name: ati2dvag.dll
Driver Version: 6.4.000.6660 (English)
DDI Version: 9 (or higher)
Driver Attributes: Final Retail
Driver Date/Size: 2/6/2006 9:50:46, 26368 bytes
WHQL Logo'd: Yes
WHQL Date Stamp: n/a
VDD: n/a
Mini VDD: ati2mtag.sys
Mini VDD Date: 2/6/2006 9:50:29, 98464 bytes
Device Identifier: {D7B7EE2-0D08-CF-B669-080AC2CB35}
Vendor ID: 0x002
Device ID: 0x4E48
SubSys ID: 0x3002002
Revision ID: 0x0000
Revision ID: 0x0000
Video Accel: ModeMPEG2_C ModeMPEG2_D ModeWMV8_B ModeWMV8_A ModeWMV9_B ModeWMV9_A
Deinterlace Caps: {6E8329FF-B642-48B-BCF0-BCB659E255F}: Format(In/Out)=(YUY2,YUY2) Frames(Prev/Fwd/Back)=(0,0,) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_PixelAdapti've
{335AA36E-7884-43A4-9C9-7F87FAF3E37E}: Format(In/Out)=(YUY2,YUY2) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_BOBVerticalStretch
{3C5323C-6FB7-44F5-908-056BF2EE449D}: Format(In/Out)=(NV2,0x323564e) Frames(Prev/Fwd/Back)=(0,0,2) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_PixelAdapti've
{552C0DAD-CCBC-420B-83C8-74943CF9FA6}: Format(In/Out)=(NV2,0x323564e) Frames(Prev/Fwd/Back)=(0,0,2) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_PixelAdapti've
{6E8329FF-B642-48B-BCF0-BCB659E255F}: Format(In/Out)=(NV2,0x323564e) Frames(Prev/Fwd/Back)=(0,0,) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_PixelAdapti've
{335AA36E-7884-43A4-9C9-7F87FAF3E37E}: Format(In/Out)=(NV2,0x323564e) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_BOBVerticalStretch
Registry: OK
DDraw Status: Enabled
D3D Status: Enabled
AGP Status: Enabled
DDraw Test Result: Not run
D3D7 Test Result: Not run
D3D8 Test Result: Not run
D3D9 Test Result: Not run
Sound Devices
Description: SB Audigy 2 Audio [CF00]
Default Sound Playback: Yes
Default Voice Playback: No
Hardware ID: PCI\VEN_02&DEV_0004&SUBSYS_00302&REV_04
Manufacturer ID:
Product ID:
Type: WDM
Driver Name: ctaud2k.sys
Driver Version: 5.2.000.96 (English)
Driver Attributes: Final Retail
WHQL Logo'd: Yes
Date and Size: 8//2006 4:45:38, 499584 bytes
Other Files:
Driver Provider: Creative
HW Accel Level: Standard
Cap Flags: 0xF5F
Min/Max Sample Rate: 4000, 92000
Static/Strm HW Mix Bufs: 64, 62
Static/Strm HW 3D Bufs: 64, 62
HW Memory: 0
Voice Management: No
EAX(tm) 2.0 Listen/Src: No, No
I3DL2(tm) Listen/Src: No, No
Sensaura(tm) ZoomFX(tm): No
Registry: OK
Sound Test Result: Failure at step 3 (DirectSoundCreate): HRESULT = 0x88780078 (No driver)
Sound Capture Devices
Description: SB Audigy 2 Audio [CF00]
Default Sound Capture: No
Default Voice Capture: No
Driver Name: ctaud2k.sys
Driver Version: 5.2.000.96 (English)
Driver Attributes: Final Retail
Date and Size: 8//2006 4:45:38, 499584 bytes
Cap Flags: 0x4
Format Flags: 0xFFF
DirectMusic
DLS Path: C:\WINDOWS\SYSTEM32\drivers\GM.DLS
DLS Version: .00.006.0002
Acceleration: n/a
Ports: Microsoft Synthesizer, Software (Not Kernel Mode), Output, DLS, Internal, Default Port
SB Audigy 2 DirectMusic Synthesizer [CF00], Hardware (Kernel Mode), Output, DLS, Internal
SB Audigy 2 Audio [CF00], Software (Kernel Mode), Output, DLS, Internal
Registry: OK
Test Result: All tests were successful.
DirectInput Devices
Device Name: Mouse
Attached:
Controller ID: n/a
Vendor/Product ID: n/a
FF Driver: n/a
Device Name: Keyboard
Attached:
Controller ID: n/a
Vendor/Product ID: n/a
FF Driver: n/a
Poll w/ Interrupt: No
Registry: OK
USB Devices
+ USB Root Hub
| Vendor/Product ID: 0x8086, 0x24D7
| Matching Device ID: usb\root_hub
| Service: usbhub
| Driver: usbhub.sys, 8/3/2004 23:08:42, 57600 bytes
| Driver: usbd.sys, 8/29/2002 03:00:00, 4736 bytes
Gameport Devices
PS/2 Devices
+ Logitech PS/2 Keyboard
| Matching Device ID: *pnp0303
| Upper Filters: L8042Kbd
| Service: i8042prt
| Driver: i8042prt.sys, 8/3/2004 23:4:36, 52736 bytes
| Driver: kbdclass.sys, 8/3/2004 22:58:32, 24576 bytes
| Driver: L8042Kbd.sys, 2/0/2004 2:47:58, 3056 bytes
|
+ Terminal Server Keyboard Driver
| Matching Device ID: root\rdp_kbd
| Upper Filters: kbdclass
| Service: TermDD
| Driver: termdd.sys, 8/4/2004 0:0:07, 40840 bytes
| Driver: kbdclass.sys, 8/3/2004 22:58:32, 24576 bytes
|
+ HID-compliant MX58 Optical Mouse
| Vendor/Product ID: 0x046D, 0xC0E
| Matching Device ID: hid\vid_046d&pid_c0e
| Upper Filters: LMouKE
| Lower Filters: LHidKE
| Service: mouhid
| Driver: mouhid.sys, 8/7/200 3:48:00, 260 bytes
| Driver: mouclass.sys, 8/3/2004 22:58:32, 23040 bytes
| Driver: LHidKE.Sys, 2/0/2004 2:48:46, 24704 bytes
| Driver: LMouKE.Sys, 2/0/2004 2:48:40, 68992 bytes
| Driver: KHALMNPR.Exe, 2/0/2004 2:45:26, 4952 bytes
|
+ Terminal Server Mouse Driver
| Matching Device ID: root\rdp_mou
| Upper Filters: mouclass
| Service: TermDD
| Driver: termdd.sys, 8/4/2004 0:0:07, 40840 bytes
| Driver: mouclass.sys, 8/3/2004 22:58:32, 23040 bytes
DirectPlay Service Providers
DirectPlay8 Modem Service Provider - Registry: OK, File: dpnet.dll (5.03.2600.280)
DirectPlay8 Serial Service Provider - Registry: OK, File: dpnet.dll (5.03.2600.280)
DirectPlay8 IPX Service Provider - Registry: OK, File: dpnet.dll (5.03.2600.280)
DirectPlay8 TCP/IP Service Provider - Registry: OK, File: dpnet.dll (5.03.2600.280)
Internet TCP/IP Connection For DirectPlay - Registry: OK, File: dpwsockx.dll (5.03.2600.280)
IPX Connection For DirectPlay - Registry: OK, File: dpwsockx.dll (5.03.2600.280)
Modem Connection For DirectPlay - Registry: OK, File: dpmodemx.dll (5.03.2600.280)
Serial Connection For DirectPlay - Registry: OK, File: dpmodemx.dll (5.03.2600.280)
DirectPlay Voice Wizard Tests: Full Duplex: Not run, Half Duplex: Not run, Mic: Not run
DirectPlay Test Result: Not run
Registry: OK
DirectPlay Adapters
DirectPlay8 Serial Service Provider: COM
DirectPlay8 Serial Service Provider: COM2
DirectPlay8 TCP/IP Service Provider: Wireless Network Connection - IPv4 -
DirectPlay Voice Codecs
Voxware VR2 .4kbit/s
Voxware SC06 6.4kbit/s
Voxware SC03 3.2kbit/s
MS-PCM 64 kbit/s
MS-ADPCM 32.8 kbit/s
Microsoft GSM 6.0 3 kbit/s
TrueSpeech(TM) 8.6 kbit/s
DirectPlay Lobbyable Apps
Age of Empires II (DX7) - Registry: OK, ExeFile: Empires2. ICD (0.4.0022.072)
Age of Empires II - The Conquerors Expansion (DX7) - Registry: OK, ExeFile: \age2_x.icd (0.07.0025.064)
Dungeon Siege 2 (DX7) - Registry: OK, ExeFile: DS2.icd ()
Dungeon Siege II Demo (DX7) - Registry: OK, ExeFile: DS2.icd ()
MechWarrior Black Knight (DX7) - Registry: OK, ExeFile: MW4x.exe (45.05.000.070)
MechWarrior Vengeance (DX7) - Registry: OK, ExeFile: MW4. ICD (.30.0004.908)
Star Wars JK II Jedi Outcast (DX7) - Registry: OK, ExeFile: jk2mp.exe ()
WDM Streaming Data Transforms:
Microsoft Kernel Acoustic Echo Canceller,0x00000000,0,0,,
Microsoft Kernel GS Wavetable Synthesizer,0x00200000,,,,5.03.2600.280
Microsoft Kernel DLS Synthesizer,0x00200000,,,,5.03.2600.280
Microsoft Kernel DRM Audio Descrambler,0x00200000,,,,5.03.2600.280
Video Compressors:
WMVideo Encoder DMO,0x00600800,,,,
WMVideo8 Encoder DMO,0x00600800,,,,
MSScreen encoder DMO,0x00600800,,,,
WMVideo8 Encoder DMO,0x00600800,,,,
WMVideo9 Encoder DMO,0x00600800,,,,
MSScreen 9 encoder DMO,0x00600800,,,,
DV Video Encoder,0x00200000,0,0,qdv.dll,6.05.2600.280
Indeo? video 5.0 Compression Filter,0x0000000,,,ir50_32.dll,5.2820.005.0058
Indeo? Video 5.2 Compression Filter,0x0000000,,,ir50_32.dll,5.2820.005.0058
MJPEG Compressor,0x00200000,0,0,quartz.dll,6.05.2600.274 9
3ivx D4 4.0.4,0x00200000,,,qcap.dll,6.05.2600.280
Cinepak Codec by Radius,0x00200000,,,qcap.dll,6.05.2600.280
DivX ;-) MPEG-4 Low-Motion,0x00200000,,,qcap.dll,6.05.2600.280
DivX ;-) MPEG-4 Fast-Motion,0x00200000,,,qcap.dll,6.05.2600.280
DivX? 6.. Codec (2 Logical CPUs),0x00200000,,,qcap.dll,6.05.2600.280
Intel 4:2:0 Video V2.50,0x00200000,,,qcap.dll,6.05.2600.280
Intel Indeo(R) Video R3.2,0x00200000,,,qcap.dll,6.05.2600.280
Intel Indeo? Video 4.5,0x00200000,,,qcap.dll,6.05.2600.280
Ligos Indeo? XP Video 5.2,0x00200000,,,qcap.dll,6.05.2600.280
Intel IYUV codec,0x00200000,,,qcap.dll,6.05.2600.280
Microsoft H.26 Video Codec,0x00200000,,,qcap.dll,6.05.2600.280
Microsoft H.263 Video Codec,0x00200000,,,qcap.dll,6.05.2600.280
Microsoft MPEG-4 Video Codec V2,0x00200000,,,qcap.dll,6.05.2600.280
Microsoft MPEG-4 Video Codec V3,0x00200000,,,qcap.dll,6.05.2600.280
Microsoft MPEG-4 Video Codec V,0x00200000,,,qcap.dll,6.05.2600.280
Microsoft RLE,0x00200000,,,qcap.dll,6.05.2600.280
Microsoft Video ,0x00200000,,,qcap.dll,6.05.2600.280
Microsoft Windows Media Video 9,0x00200000,,,qcap.dll,6.05.2600.280
XviD MPEG-4 Codec,0x00200000,,,qcap.dll,6.05.2600.280
DivX? 6.. YV2 Decoder,0x00200000,,,qcap.dll,6.05.2600.280
Audio Compressors:
WMA Voice Encoder DMO,0x00600800,,,,
WM Speech Encoder DMO,0x00600800,,,,
WMAudio Encoder DMO,0x00600800,,,,
Indeo? Audio Software,0x00500000,,,iac25_32.ax,2.00.0005.0054
Vorbis Encoder,0x00200000,,,OggDs.dll,0.09.0009.0005
IAC2,0x00200000,,,quartz.dll,6.05.2600.2749
Lernout & Hauspie CELP 4.8kbit/s,0x00200000,,,quartz.dll,6.05.2600.2749
Lernout & Hauspie SBC 8kbit/s,0x00200000,,,quartz.dll,6.05.2600.2749
Lernout & Hauspie SBC 2kbit/s,0x00200000,,,quartz.dll,6.05.2600.2749
Lernout & Hauspie SBC 6kbit/s,0x00200000,,,quartz.dll,6.05.2600.2749
IMA ADPCM,0x00200000,,,quartz.dll,6.05.2600.2749
PCM,0x00200000,,,quartz.dll,6.05.2600.2749
Ogg Vorbis (mode),0x00200000,,,quartz.dll,6.05.2600.2749
Ogg Vorbis (mode2),0x00200000,,,quartz.dll,6.05.2600.2749
Ogg Vorbis (mode3),0x00200000,,,quartz.dll,6.05.2600.2749
Ogg Vorbis (mode+),0x00200000,,,quartz.dll,6.05.2600.2749
Ogg Vorbis (mode2+),0x00200000,,,quartz.dll,6.05.2600.2749
Ogg Vorbis (mode3+),0x00200000,,,quartz.dll,6.05.2600.2749
Microsoft ADPCM,0x00200000,,,quartz.dll,6.05.2600.2749
ACELP.net,0x00200000,,,quartz.dll,6.05.2600.2749
DSP Group TrueSpeech(TM),0x00200000,,,quartz.dll,6.05.2600.2 749
Windows Media Audio V,0x00200000,,,quartz.dll,6.05.2600.2749
Windows Media Audio V2,0x00200000,,,quartz.dll,6.05.2600.2749
GSM 6.0,0x00200000,,,quartz.dll,6.05.2600.2749
Messenger Audio Codec,0x00200000,,,quartz.dll,6.05.2600.2749
Microsoft G.723.,0x00200000,,,quartz.dll,6.05.2600.2749
CCITT A-Law,0x00200000,,,quartz.dll,6.05.2600.2749
CCITT u-Law,0x00200000,,,quartz.dll,6.05.2600.2749
MPEG Layer-3,0x00200000,,,quartz.dll,6.05.2600.2749
Midi Renderers:
Default MidiOut Device,0x00800000,,0,quartz.dll,6.05.2600.2749
WDM Streaming Capture Devices:
SB Audigy 2 Audio [CF00],0x00200000,3,2,,5.03.2600.280
WDM Streaming Rendering Devices:
SB Audigy 2 DirectMusic Synthesizer [CF00],0x00200000,,,,5.03.2600.280
SB Audigy 2 Sw Synth [CF00],0x00200000,,,,5.03.2600.280
SB Audigy 2 Synth A [CF00],0x00200000,,,,5.03.2600.280
SB Audigy 2 Synth B [CF00],0x00200000,,,,5.03.2600.280
SB Audigy 2 Audio [CF00],0x00200000,3,2,,5.03.2600.280
BDA Network Providers:
Microsoft ATSC Network Provider,0x00200000,0,,msdvbnp.ax,6.05.2600.280
Microsoft DVBC Network Provider,0x00200000,0,,msdvbnp.ax,
Microsoft DVBS Network Provider,0x00200000,0,,msdvbnp.ax,6.05.2600.280
Microsoft DVBT Network Provider,0x00200000,0,,msdvbnp.ax,
BDA Transport Information Renderers:
BDA MPEG2 Transport Information Filter,0x00600000,,0,psisrndr.ax,6.05.2600.280
MPEG-2 Sections and Tables,0x00600000,,0,mpeg2data.ax,
WDM Streaming Mixer Devices:
Microsoft Kernel Wave Audio Mixer,0x00000000,0,0,,
BDA CP/CA Filters:
Decrypt/Tag,0x00600000,,0,encdec.dll,6.05.2600.280
Encrypt/Tag,0x00200000,0,0,encdec.dll,6.05.2600.280
XDS Codec,0x00200000,0,0,encdec.dll,6.05.2600.280
Audio Renderers:
CyberLink Audio Renderer for Dell,0x00200000,,0,cladr.ax,3.05.0000.2409
Default DirectSound Device,0x00800000,,0,quartz.dll,6.05.2600.2749
Default WaveOut Device,0x00200000,,0,quartz.dll,6.05.2600.2749
DirectSound: SB Audigy 2 Audio [CF00],0x00200000,,0,quartz.dll,6.05.2600.2749
WDM Streaming System Devices:
SB Audigy 2 DirectMusic Synthesizer [CF00],0x00200000,,,,5.03.2600.280
SB Audigy 2 Sw Synth [CF00],0x00200000,,,,5.03.2600.280
SB Audigy 2 Synth A [CF00],0x00200000,0,2,,5.03.2600.280
SB Audigy 2 Synth B [CF00],0x00200000,,,,5.03.2600.280
SB Audigy 2 Audio [CF00],0x00200000,2,2,,5.03.2600.280Message Edited by guru7892 on 05-20-20072:43 PM
Message Edited by guru7892 on 05-24-200705:55 PM

I found that once you reinstall your sound card you need to make sure you hook everything back up correctly.
basically all you need to do is run a start up with your sound card out ofyou computer and then re-run start up with the card back in.

[Sound Blaster ZX]Control Panel takes 6 MINUTES to load and is nearly unusable?!

All,
Yesterday I took the plunge and picked up a Sound Blaster ZX to replace my old Audigy Platinum. Unfortunately I've been met with a series of problems that leave me with a bad taste in my mouth about my purchase.
The driver install seemed to go well though it was a little disconcerting when the 'Check for update' button in the auto update tool that runs right after install was grayed out. I noticed that I was not getting sound out of the 5.1 analog inputs that I had connected up to my Logitech Z680 speaker system. So I checked the system tray and there was a new SB icon there, that was clearly a utility to get to the configuration. Knowing this was probably the right place to start fiddling with the settings, I clicked it. And waited. And waited. And waited some more.
Strange I thought, so I checked the Windows task manager and located the Sound Blaster control panel in the list of running processes. I waited another minute or so and still nothing was displaying. So I killed the process in task manager, located the shortcut to the SB ZX control panel in the start menu and launched it. Again with the waiting. I immediately took to google and started researching a potential problem with this card.
As I was searching and had forgotten that I had launched the Control Panel, it suddenly showed up on my screen. Wow I thought, that took a while to load. I then proceeded to try to navigate the various areas of the Control Panel application. I was immediately concerned when I noticed that the app was not responsive and appeared to be frozen. I decided to patiently wait to see if it would wake up. Fortunately it did, though only after waiting for several minutes. I then attempted to close the Control Panel app, which it did after several more minutes of waiting.
I thought maybe there was some anomalous process running so I decided to try the Control Panel from a fresh boot. After my machine had started up, I clicked the SB icon in the system tray again, only this time I was going to time it. I recorded that it took 6 FULL MINUTES from the time I clicked the icon until the application displayed on my screen. Further, the lag of switching between the various areas of the application was as high as 3-4 minutes. In essence this software is completely unusable.
I decided to try the TOSLINK connections between my speaker system and the soundcard to see if it would respond better. I set the mixer settings(via the built in Windows mixer) and I could get it to produce sound albiet only in two channel stereo. Progress, or so I thought. So I switched back to the analog connections and there was no difference in the response of the control panel. I had found some instances where an onboard or video card based HDMI audio driver might interfere with the card. I had long since disabled the on board sound of my Asus P5Q Pro motherboard via the BIOS so there were no drivers hanging around from it. I then took a look at the device manager and disabled the ATI High Defintion Audio device that was likely part of my SAPPHIRE 100259-1GL Radeon HD 4870 video card. This had no effect, I was still getting no sound from my speakers and the interface is abysmally lagged.
I then took the following steps to no avail:
Uninstall all Soundblaster ZX drivers and software
Restart machine
Install the updated Soundblaster ZX software from the Creative Support site: http://support.creative.com/Products...T=CategoryID:1
Nothing I have tried has resolved the issue with the virtually unusable lag that occurs when trying to run the Control Panel and/or configure the Soundblaster ZX or the amount of time it takes to start up.
Anyone experienced this and know of a fix or a remedy? I really want to enjoy this sound card.
**UPDATE**
I just wanted to post up and say that I solved this issue by first uninstalling all drivers for both the SB ZX and my Radeon graphics card. I then used Driver Fusion(http://treexy.com/products/driver-fusion) to perform a registry/file cleanup on all files associated with AMD graphics cards and Creative sound cards. Then I installed the drivers & software for the SB ZX from the CD that came in the box. I was pleasantly surprised to see that the software was responsive and the hardware was fully functioning. I then installed the software for my Radeon card however this time, I selected a custom install and chose NOT to install the HDMI audio driver. I don't know if this was key or not but at any rate, after the graphics card drivers and software was installed I am happy to report that the SB ZX software remained responsive and fully functioning.
I then updated the SB ZX software to the version linked above(1.0.22) from the version that ships on the CD - 1.0.13 and strangely the Cinematic tab disappeared from the Pro Studio control panel. Some research revealed that this tab is dependent on the Creative Labs Extras which seemed to have gotten nuked during the update. I was able to bring back the Cinematic tab by re-installing the extras from the CD, however it only installed the Dolby Digital Live component. DTS connect is still missing. I am going to do a little more research to see what I can do to get it back.
Hope this helps someone who runs into this same predicament.

Any news about the SoundBlaster Zx Linux drivers? Currently, there's no way to get even the most basic sound of it on Linux.

Logitech camera does not appear in sound control panel

I have a Logitech webcam. Both audio and sound worked well until yesterday. Now the audio does not work (Video is fine) ando does not appear in sound control panel. I've tried the webcam in other mac and works fine.
I'm running Lion 10.7.5 on a Mac Pro mid 2007.
Any idea?
TIA
Antonio

HI,
Restart the Mac.
If that does not work I would also try a PRAM reset.
Shut down the computer.
Restart it holding down Apple/CMD ( or ⌘)+ALT( ⌥)+P+R Keys until you have heard three Start Up Bongs.
8:36 PM Wednesday; November 28, 2012
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
 iMac 2.5Ghz 5i 2011 (Mountain Lion 10.8.2)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
 Couple of iPhones and an iPad
"Limit the Logs to the Bits above Binary Images."  No, Seriously

Front I/0 panel on Sound Blaster Audigy 2 Platinum ZS not fo

The front I/0 panel on Sound Blaster Audigy 2 Platinum ZS not found by Creative Volume Control Application. Under recording sources, I can only choose from "What you hear", MIDI Synth, S/PDIF-In, CD Digital, Analog Mix (Line/CD/Aux/TAD/PC), Microphone and Wave. The option to record from anything on the front panel, (Aux-in 2, Line-in/Mic-in 2) have disappeared. I have tried re-installing the software from scratch, just installing Creative Update components and even formatting the hard-dri've and re-loading Windows but it still doesn't work!!?Does anybody have any helpful suggestions on this frustrating matter?

If you're using a dynamic microphone, the Audigy 2 ZS dri've bay has a jumper which you can change for it to support dynamic microphones instead of electret microphones. However once this is done you won't be able to use electret mics until you've changed the jumper setting back.

Audigy 4 EAX Control Panel - ORIGINAL SOUND ALWAYS HEARD NO MATTER W

Similar Messages

Maybe you are looking for