Audigy 4/how do i preview track 1 while recording track 2. tha

good day, i just bought a audigy 4 (not the special edidtion with remote, etc..
my problem is when i open my production software (digital recorder--------
say i record the drums on track in multi rack view. when i unarm track and arm track 2 to say record a piano. Then when i press play to hear track 2 it plays the drums i recorded on track . the drums on track record on all my tracks. i had this problem with the soundcard that came with my pc, i think somebody said something about it was pretty cheap and didn't come with preview or something...........anyways i just bought a Soundblaster Audigy 4, well it's far from top of the line but it's a big upgrade for me, any know how i can fix this problem of track being recorded on all the tracks. It's important for me to be able to listen to previously recorded tracks while playing a new .
so does anybody know how and if Audigy 4 can do this? this is essential, i bought this soundcard for i could go from my hardware digital recorder to software digital recorder. if there's a way can someone give me exact instructions on how to do this.
'm using audigy 4 soundcard, 2.53 ghz intel celron, 40gb hard dri've, 52 mb of ram, and the recorders i'm using are cakewalk guitar pro and adobe audition. thanks

Just stop using "What U Hear" as a recording source. If you're using ASIO, the ASIO Mix L works like "What U Hear".
As recording source, use microphone for microphone and line-in (or AnalogMix()) for line-in sources.
For monitoring, there is a checkbox behind a tiny red plus sign in CT Surround Mixer (or behind advanced button in windows audio I/O controls) you may need to set (this setting and recording source selection from ct surround mixre/windows recording controls has no affect when you're using ASIO device driver mode in software).
jutapa

Similar Messages

How to fix the delay problem while recording? Can't set the Latency to 0. Win7, CS6,Realtek,C03u Mic

I am using Win7, with CS6, Realtek soundcard and Samson C03U microphone.
There is a problem that's really been bothering me. When I record songs the recorded audio always comes 0.1 seconds after where it's supposed to be and I need to fix the problem every time. How to fix the delay problem while recording? I can't set the Latency to zero. The minimum is 30ms and I still get an obvious delay.
I saw some previous discussions saying that installing ASIO would help. Is it gonna work on my PC?
Thank you in advance guys.

You probably should look at a more 'serious' audio interface rather than the Realtek
Yes ASIO drivers are the way to go
If you want zero latency you need to monitor via your audio hardware (hence the 'serious' audio interface suggestion)
There are a heap of reasonable audio interfaces which will do the job for you that are pretty inexpensive and I'm sure that someone will jump in with a suggestion

How to Have Effects Turned on WHILE Recording

I want to use Audtion as a live multi-track audio recorder for some multi-cam video work (5 talking heads on lavs). I want to record with certain effects (compression, limiter, etc.) on WHILE recording--NOT applied to the tracks AFTER recording. Is this possible?
I can only seem to be able to apply effects to tracks AFTER recording has already occured.

Hmm... RANT!
Bob Howes wrote:
Finally, regarding SteveG's slur against TV sound people, I resemble that remark. Yes, we DID overdo compression but there were some technical reasons for this. For example, when we converted to satellites for distribution, we quickly found that the satellite system itself would overload slightly below +12dBu on the input. Not only did this sound bad, the satellite operator would threaten to throw us off (due to interference with adjacent users) if we hit this level--so everything we did had a brick wall limiter above +8dBu. However, this was still AFTER the production chain, not on the input. When doing location sound, although I'd leave the limiter on in the camera--but I'd set my gain staging so this was only a last-resort stopgap, not something being relied on to control levels.
It wasn't a slur against the people doing it - it was against TV sound, which, for the reasons you state, generally ends up as crap. It's also worth noting that it doesn't really stand a chance, right from the outset. For some strange reason, pictures always seem to come first. It's ludicrous; turn the picture off and listen to the sound, and you'll still have some sort of an idea what's going on. Turn the sound off though, and you generally have absolutely no idea at all! So which is really more important? Getting some presenter's ugly fizzog on the screen, or hearing what they're saying (I have to be careful here, as I might trip up my own argument...) So in some instances, sound ops don't have a lot of choice.
But overall, standards are slipping even further. Despite all of this legislation from the EBU, broadcasters still can't normalize levels between programmes. At present, the BBC is a particularly bad offender. It's not just compression, it's everything. I've recently watched orchestras being miced up, with some horror - bloody mics everywhere. End result doesn't sound like an orchesta at all - it sounds like a slightly sophisticated big band. So when I go and stick my SoundField (or even a Decca Tree) over an orchestra, people are amazed - suddenly it sounds like an orchestra again! I've asked some of the badly-trained monkeys why they do it like this, and have yet to recieve a satisfactory answer.
But in overall terms I don't care about compression on general TV output - it's only moving wallpaper, and you don't want to have to keep changing the levels, so from that POV it's a good thing; it's 98% rubbish anyway. But it does mean that on better programmes where they compress less - like Top Gear - you have to turn up the volume to listen to it, and be prepared to be deafened occasionally. That's fine, but at the end of the transmission you have to remember to turn the volume down again pretty quick...

How To Get PREVIEW on Television while in Timeline?

I have a datavideo analog convertor I use to watch playback on my television from FCP. When I use Print To Video it will show up fine but I also used to be able to just play through the timeline and view on my TV as well. For some reason that option no longer works so cannot watch what I am doing on the TV unless I Print To Video (and on a larger feature that just means playing the whole feature just to see the one spot).
Any idea what I may have "switched" to disable this?

Here's my BIG list. Although I am sure Randy's suggest is the one that solves it.
#8 External Monitor Viewing.
Shane's Stock Answer #8:
A simple path is mac > firewire > camera or deck > rca cables > tv
Then start up your camera and tv, then open fcp.
Then go View > External video > all frames
Video playback should be Apple firewire NTSC (If you are using an NTSC set)
Audio playback should be Audio follows Video
Techinially, this should send synched video to your TV
If for some reason you can't view your timeline on your external monitor, there are a few things to try:
1) Make sure that the camera/deck is connected and powered on BEFORE you open FCP.
2) In the Final Cut Pro menu select AUDIO/VIDEO Preferences and make sure your signal is being sent out thru Firewire DV.
3) Go to the menu and select VIEW>EXTERNAL>ALL FRAMES.
4) Click in the % box above the image and select FIT TO WINDOW.
5) Go to VIEW->refresh A/V devices
6) Make sure the Log & Capture window is closed
If you want it to play in both the canvas and the external monitor you need to go to the FINAL CUT PRO menu and select AUDIO/VIDIO settings and make sure MIRROR ON DESKTOP is selected under the PLAYBACK OUTPUT section
Shane

How can I pause an action while recording so I can...

Hi all,
I have made many actions before but I do not know how to do this. Ok I want to make an action which will unlock the background layer then duplicate that layer and add adjustment mask to the new layer, I have gotten all this done. But on the final stage of the action I want to open Shadow/Highlight adjustment window; now at this point I want the playing action to stop while I adjust the S/H then continue after I hit OK. I have tried inserting stop into the recording but that does not work. Is there any way to do this? I am working with PS CS2 on a Mac G5. Thanks for any help!

To the left of the listing of »Shadows/Highlights« in the Actions Panel is a field, which can be toggled: »Toggle dialog on/off«
If You hit that it should turn into a little symbol of a dialog-window (I guess) and on subsequently running that Action You should be able to do edits in the dialog-panel and have the Action resume on hitting Enter.

How to Hear Metronome in Headphones While Recording Through Audio Interface - Help!

Hey everybody,
So I've been trying to work through this problem for 3+ hours now and I'm stumped. It's very frustrating as it is such a simple problem. Right now I'm recording acoustic guitar through an audio interface - guitar sound goes to microphone, microphone goes to interface, interface goes to audio jack in Macbook. Pretty simple setup. I can even insert a splitter into the audio jack on the Macbook which will allow me to hear what I am playing through the interface in my headphones, which is what I wanted. However, when I hit record and the metronome starts playing, as I want it to, I can't get the metronome to play through my headphones - they will only play through the speakers. How can I get around this? Is it even possible, or do I need an audio to USB interface so I can have a set audio in (through the USB) and a set audio out (through the audio port)? Again, your help would be much appreciated as I am completely stumped.
Cheers!

In Logic Pro 9 (and X) you can assign different devices to the In- and Output, so I don't understand why you wouldn't be able to get sound in through the microphone and out through the headphones. You can even combine the ouputs into a Multi-Output device to send the same sound simultaneously to all outputs.
You can also aggregate all your in- and outputs into an Aggregate Device, then you can use any of your outputs and any of your inputs inside the same Logic project (on the channel strips).
Setup in Audio MIDI Setup (separate app, part of any OS X install, can be found in the Applications>Utilities folder)
Setup in Logic Pro>Preferences>Audio>Devices (apart from colorscheme, it's the same in LP 9 and LP X)

How to remove 'tik tik' sound while recording voice/vocal.

I'm trying to record voice/talk for a radio show using GB app. Everytime I hit record button is records fine but also record TIK TIK sound continuously through out the recording session. I don't know what this sound is. I'm just using headphone mic. I don't have any other mic to attach.
Thanks!

I don't think we have these options here
I don't have the iPhone, but probably the iPod is similar:
Try to press the cogwheel at the upper right of the screen. Go to the "Song" settings, not the "track" settings.
The Metronome is the top most option.

How do I mute internal microphone while recording video in new ipad

Is it possible to mute internal microphone while recording video in new ipad

No. There is no setting to mute the mic.

Multi-track Recording with Audigy (input level adjustment of 6 tracks)

Hi,
Has anyone used an Audigy (or similar) to record more than 2 channels?
I have an Audigy 4, which I use for 24 bit recordings. Usually I just use 2 channels, and an ASIO4ALL v2 interface which probably uses the "WDM:SB Audigy 4 Audio [D880]" driver.
However, there's another driver I can select which is "SB Audigy 4 ASIO 24/96 [D880]", and this gives me 6 input channels corresponding to the R and L channels of the inputs line , 2 and 3. This is great, and seems to work OK, but whereas I can control the levels of the incoming signals (on line 3 L/R) with the 2 channel driver, the Creative surround mixer doesn't have any control over the input levels in the 6 channel case, so I'm stuck with having to adjust the level of the incoming signal externally.
Has anyone found a solution to this difficulty? I've updated to the latest drivers.
I'm using Windows XP pro. and the recording software is n-Track 5.1.
Thanks,
Peter

Marskat wrote:
HI, I dont know if anyone has had this happen to them or not. I Have a MODEL # SB0090 Creative Labs Sound Blaster Audigy with 394 PCI Sound Card with the front controls. I have used it for years. I just re-loaded it into a new computer and loaded the new driver. When I had the old driver loaded I got a very harsh repeated ......BLAP.....BLAP.......BLAP.......BLAP it was very nasty and sounded like a cd skipping. I loaded the new driver and that got rid of the BLAP skipping thing. Now with the new driver when I bring up the windows play and record controls and when I have the Mutes all off and say for example AUX 2 selected, as soon as I arm the track in Sonar the AUX 2 on the windows play control auto mutes right before my eyes I can then de-select mute and the track stays armed, BUT as soon as I hit record it will auto mute again yet the meters still move and it still records and I am able to de-select mute again while recording and it does not effect the recording. It is a very big hassle during a recording project. ANY IDEAS WOULD BE AWESOME!!!!
Are you using ASIO (or asio4all), WDM/KS or MME32 on Sonar?
Not sure but have you checked how the "Record Without Monitoring" (or similiarly named ) option is set (Start menu, Run..., sndvol32 /r).
On Sonar you may need to enable Input ECHO ( [color="#339966"][)))]? button on track headers).
jutapa

How to match sound track to movie pictures? (the sound track is shorter)

I have a sound (narrative) track of approx 1 hr which talks about the movie film. However the film I have, is a slightly different version, that is about 10 min longer then the sound track and I would like to restore the match, e.g. by something like cutting the sound track and inserting blanks, or cutting and moving the sound a couple of seconds. Note I'm totally new to Premiere V 10. I presume I would have to use start and end marks in the sound track and place the subsequent sound parts on a new sound (or narrative?) track (but it seems I will need to introduce additional silent parts, I cannot just move (drag?) the next sound track a couple of seconds to the left.
I would guess there are a couple of easy tricks to achieve my goal.
Thank you in advice.
Rob Tausk

Well well: not easy nor trivial at all, but I haven’t given up as yet! I’ll describe my workflow below.
1.       Play video fragment, and comparing film picture and sound estimate position where I need to introduce a silent period and it length.
2.       By double click play sound “comment track” on the monitor and set end stop (I would actually prefer if the sound track could be zoomed to more easily/accurately find best position)
3.       Play mute sound clip in preview and set time length with end stop and close preview
4.       Move mute clip to comment track, which has been shortened in step 2
5.       Play main sound clip in Preview and set start point
6.       Move this sound clip to comment track.
But sometime things go slightly wrong, e.g. when moving mute or sound fragment to “comment track” I find that the video track cuts (not intended)
Another difficulty I still need to master is related to the phenomena you mentioned before, related to moving sound clips, parts which were before the starting point show up (e.g. drag edges).
I hope you can roughly follow my explanatory story (I realise writing such workflow is difficult and critically depends on the same use of words concepts definitions and jargon (note my Adobe Premiere Elements is in Dutch).
I’d much appreciate your comments (maybe another software would be friendly to the inexperienced senior citizen)
Van: A.T. Romano
Verzonden: woensdag 23 juli 2014 18:37
Aan: Robert Tausk
Onderwerp: How to match sound track to movie pictures? (the sound track is shorter)
How to match sound track to movie pictures? (the sound track is shorter)
created by A.T. Romano <https://forums.adobe.com/people/A.T.+Romano> in Premiere Elements - View the full discussion <https://forums.adobe.com/message/6576612#6576612>

How can I get Tracker to find a shared review PDF initiated in another domain?

I initiated a shared review for a PDF and stored it on a network server in domain X. Subseqauently, the server was moved into a different domain, call it Y.
Now, Acrobat Tracker can't find the PDF ... and reviewers can no longer access the PDF.
How can I get Tracker to find the PDF in the new domain Y?

No, this is not possible. You need to initiate the review again. This is because the review server information is embedded inside the PDF and when you change the review server, the JavaScript embedded in PDF still refers to the old server. So Tracker is unable to locate the review PDF.
If the old review has comments by other reviewers, you can save it as an archive and initiate review on new server on this new PDF. This way all the review comments can be retained in the PDF but they will be published "on behalf of" the initiator now.
Hope that helps.

While creating a project in Garage Band my sample tracks were cut short then overwritten in soundtrack pro. Any ideas why? and how to get my tracks back?

While creating a project in Garage Band 09 my sample tracks were being cut short- I then discovered they had been overwritten in soundtrack pro.
Any ideas why? and how to get my tracks back?
I never opened soundtrack pro to edit the track just Garage band....the track just mysteriously saved as half the track.
I am running Lion and I upgraded my Garage band to '11 hoping it would resolve the issue...it didn't. Now I can't find that tracks at all.
The 2 songs having the issue are titled Exotic Yearning and Reunion.
I am in the process of reinstalling the audio content from my discs. I just don't want to run into this again.
Any thoughts and help would be greatly appreciated!
Thanks!

After spending some time reinstalling the soundtrack pro 3 content I opened the full track called Reunion.
It showed back up in Garage Band.*It was the full track and wasn't chopped off until I dragged it onto the project. Then it showed up chopped.
Then I closed Garaged band and opened soundtrack pro 3....The song was again chopped off at the 1:33min mark
Very Frusterated...:(

How To Selectively Preview In Camera Raw?

I was reading in one of the Photoshop magazines that there was a way to selectively preview attributes in Camera Raw but I can't remember how to do it.
To be more specific: When you are working in one of the develop tabs ( any of the upper left special tabs) in camera raw and toggle the preview button it only shows you the preview for that specific tab (compared to the original raw file). I want to know how I can preview the original image compared to ALL of the attributes I've changed at once OR only preview the one specific attribute that I've changes compared to the original raw file.
Does anyone know how to do this? Please advise.
Regards,
Rod Klein
www.rhkuw.com

Terminology-wise, your description of what you want seems to be off a little, since there's not really an "original raw file" per se.
There are the settings you started with, i.e., the Camera Raw Defaults (if the raw file has not been opened before) - or - the stored Image Settings for this raw file (if you opened it before). I'm assuming what you're asking for is a way to see the current entire batch of settings, vs. what you started with.
When you make control changes, the set of parameters is now considered Custom Settings.
The way that comes to mind to compare is to click the fly-out menu icon and choose Image Settings (i.e., the settings you started with), or Custom Settings (i.e., your current changes since starting with the image this session).
-Noel
P.S., This key summary is often helpful:
http://help.adobe.com/en_US/photoshop/cs/using/WS982EFD65-8549-4c58-AD7D-0C2C2C39DAF1a.htm l
Unfortunately, I know of no way to assign keys to menu items in Camera Raw. That doesn't mean it doesn't exist, just that I don't know of a way.

How to VIEW two tracks's materials SIMULTANEOUSLY and SYNCHRONIZED in MONITORS?

How to VIEW two tracks's materials SIMULTANEOUSLY and SYNCHRONIZED in MONITORS?
"Program-monitor" shows the final edited material, and "Source-monitor" shows only one track at a time, and NOT SYNCHRONIZED with the sequence. "MultiCam-monitor" shows the tracks as I need, BUT editing is very stiff: I want to do edits+cross-fades by hand IN THE TIMELEINE rather than by clicking the monitors. (Some of the "MultiCam-monitor's" other problems: 1) the timeline's time-inspector doesn't move while clicking the monitors, 2) vice-versa: monitor-image doesn't roll when the space-key is pressed for playback the timeline, 3) monitor doesn't show the cross-fades.....) I understand the "Reference-monitor" doesn't help either at this.
I would SO much like to SEE all tracks' materials simultaneously in whatever monitor, to edit efficently in the timeline.
Software: Premiere CS3 version 3.2.0
Operating System: Mac OS X (v10.4)

You can only do this in the multicamera monitor. That's what it's there for. Proper procedure is to cut there, then go to the timeline and add transitions.
If you're multicamera monitor playback isn't working correctly (I admit having a hard time understanding your points here), then try solving those.

How do you preview using a spool request number

How do you preview using a spool request number?
I have an application in which I have accumulated the results from several smartforms into one spool request. I have the spool request number, and am printing it using function RSPO_RPRINT_SPOOLREQ.
I need to be able to preview the contents of the spool request before printing. I can not preview when generating the smartforms, as that involves several previews, and I need to preview once only per spool request.
I have been trying to use RSPO_RDISPLAY_OUTREQ but it dumps immediately (line 47) with field symbol <FTSP01> not assigned.
Suggestions?

*With no faction module "COM_SE_SPOOL_DISPLAY", try this simple code, you can display the form *type spool (you also can put the code in a function module):
REPORT ypl_test_display_spool MESSAGE-ID zm_print.
PARAMETERS: rqident LIKE tsp01-rqident,
                        rqdocty LIKE tsp01-rqdoctype.
*--- there may be more types need to separate..., so use case...
CASE rqdocty.
WHEN 'OTF' OR 'SMART'.
    PERFORM display_form.
WHEN OTHERS.
    PERFORM display_others.
ENDCASE.
*&      Form DISPLAY_FORM
      display form type spool...
FORM display_form.
DATA: wstr_otf_control TYPE itcpp.
DATA: wtbl_buffer TYPE TABLE OF soli WITH HEADER LINE.
DATA: wtbl_otf TYPE TABLE OF itcoo WITH HEADER LINE.
DATA: wstr_retcode LIKE itcpp.
*--- return spool raw data
CALL FUNCTION 'RSPO_RETURN_SPOOLJOB'
    EXPORTING
      rqident              = rqident
    TABLES
      buffer               = wtbl_buffer
    EXCEPTIONS
      no_such_job          = 1
      job_contains_no_data = 2
      selection_empty      = 3
      no_permission        = 4
      can_not_access       = 5
      read_error           = 6
      type_no_match        = 7
      OTHERS               = 8.
IF sy-subrc <> 0.
    MESSAGE s013 WITH text-001.
    EXIT.
ENDIF.
LOOP AT wtbl_buffer .
    wtbl_otf-tdprintcom = wtbl_buffer(2).
    wtbl_otf-tdprintpar = wtbl_buffer+2.
    APPEND wtbl_otf.
ENDLOOP.
*--- some data to pass to this parameter, may not need...from SP01...
wstr_otf_control-tdcopies = 1.
wstr_otf_control-tdappl = 'TX'.
wstr_otf_control-tddest = 'LOCL'.
wstr_otf_control-tdpages = 0.
wstr_otf_control-tdnoprint = 'X'.
CALL FUNCTION 'DISPLAY_OTF'
    EXPORTING
      control = wstr_otf_control
    IMPORTING
      RESULT = wstr_retcode
    TABLES
      otf     = wtbl_otf.
IF wstr_retcode IS INITIAL.
*--- message...
ENDIF.
ENDFORM.                    "DISPLAY_FORM
*&      Form display_others
      display other types, may more types needed to separate...
      you can refer current version of SAP report RSPOLST2
FORM display_others.
CALL FUNCTION 'RSPO_DISPLAY_SPOOLJOB'
    EXPORTING
      rqident              = rqident
    EXCEPTIONS
      no_such_job          = 1
      job_contains_no_data = 2
      selection_empty      = 3
      no_permission        = 4
      can_not_access       = 5
      read_error           = 6
      OTHERS               = 7.
IF sy-subrc <> 0.
    MESSAGE s013 WITH text-001.
ENDIF.
ENDFORM.                    "display_others

Audigy 4/how do i preview track 1 while recording track 2. tha

Similar Messages

Maybe you are looking for