Audigy 4 - no stereo sound from lin

I just bought an Audigy 4 soundcard. I'm using to record guitar and vocals with Adobe Audition. Problem. My guitar is only recorded on the right side when it plugged into line 2 of the box. Before you answer,
) it is not the pan feature in Adobe Audition (it's set dead center)
2) it is not the type of cable I use to connect to my guitar
3) it is not any setting on my guitar (the guitar records on both sides when plugged into line /mic)
I think it is the line 2 jack on the Audigy box but I hope I'm wrong because I don't want the hassle of sending this back.
If you have suggestion to help or to troubleshoot, I would appreciate it.

anyone?

Similar Messages

Stereo sound from all speake

Hii, I have a X-Fi Xtreme music and a 5. speaker setup, can someone tell me how can I get stereo sound from all of my speakers? thanks in advance.

Hmmm, I don't have an X-Fi, but to answer your question the first thing someone needs to know is how you have your speakers connected. If, for example, you're running throgh a receiver you need to separately output each channel (using 3.5mm mini plug to RCA cables/converters you would buy at Radio Shack) to the external decoder of your receiver. Of course, in that insance, you would output the DD source stream from the optical out of the card through the optical in of the receiver; stereo playback would be from a 2. signal. I run both configs on mine. Now, if you're running computer speakers already plugged into the correct outputs of the sound card that's a different question, and it's one I can only relate from my experience with the Audigy 2 software.

Audigy 2 ZS sound from USB headphones but none from speakers

<Audigy 2 ZS sound from USB headphones but none from speakersw Hello everyone. Lately my computer has been acting up a bit (HP xw6200 workstation) and I updated the graphics and sound drivers to fix the issues with crashing. I first tried to update the audio drivers from the Creative support website but when the installation was finished and the computer restarted there was no longer any sound and all of the volume controls stopped working (sliders, buttons, checkboxes, etc. turned gray). I tried a couple more times to uninstall, then reinstall the driver but it still didn't work. Finally I went to the HP support website and downloaded the audio driver from there and installed it. Now the volume controls work again and when I plug in my Logitech USB headset I can hear sound just fine but when they are unplugged and I try to use my desktop speakers there is no sound at all. I played around with the volume controls, made sure the device and output was correct, and plugged the green output cable to the speakers in all of the sockets I could find while playing a song on Windows Media but it still doesn't work. Anybody have an idea of what might be going on and how to fix it's

@? OK another update (sorry I know I'm posting a lot). I downloaded and installed a different driver from the Creative support site and I now finally have sound in my speakers again. BUT the original problem I was having came back. Whenever I play a game (lately it's been Warcraft III) that seems to have more advanced 3D sound (more than, say, a web video on YouTube) the screen will all of a sudden turn some really weird pattern, the sound will stop, and the entire computer freezes; I then have to manually shut down (with the power button), wait a few seconds, then reboot. I thought this was a graphics issue so I downloaded and installed the latest driver for my video card (nVidia Quadro FX) which didn't help. Now I think it might be a sound card issue (or maybe motherboard?) because this problem doesn't happen when I use my USB headphones to play games. Might my sound card be dying or "breaking" somehow?

No stereo sound from I/O

Hey all! I have an Audigy 2 ZS Platinum Pro card, and for some reason I cannot get any stereo sound (only mono) from the I/O hub, both through the headphone out, as well as through the headphone out on a MIDI controller plugged into the hub via firewire.
5. Surround Sound works in all 5 speakers connected through the analog miniplugs on the card, and stereo sound works through the headphones when they are plugged directly into the speakers via a headphone out there.
Any suggestions as to how to get stereo sound to work from the I/O hub?Message Edited by freechus9 on 07-30-200707:00 PM

anyone?

No sound from Line out on X-Fi El

I have lost my sound from the Line Outs on a X-Fi elite. Or rather I can hear it but only if the volume is a 00% and then it is very poor quality. I have been using the Headphone Jack on the breakout box and this is my first time trying the Line Out. Can somebody tell me if the Line out is supposed to be a true low power Line out or is it capable of powering unpowered speakers or some small headphones. It seems to me that headphones should work fine from the Line out, so what do you suppose my problem is? I have checked the normal (IRQ, Drivers, default device, volumes, etc.). Any ideas? I'm running an MSI Nforce3 250gb board.
thanks...

mr. kat,
unfortunately, I don't have Playcenter -- I downloaded the file from Creative, and am met with the same message I receive when attempting to install Creative Recorder on win XP: nothing to upgrade, so no go on the install. I don't know how to get the data onto win XP in order for it to be upgraded. :0
I do remember there being CMSS back when I ran this device with my win98 computer, and that probably has something to do with it. I don't have EAX console either, but I do have the EAX Control Panel (aka Audio HQ) and there were no CMSS features there.
I have heard that one can use the SB Audigy installation with their SB Li've! cards and it will work -- have you heard anything to that effect?
Thanks,
mono

Ipod doesn't produce stereo sound from iphone built-in speakers?

I've had my iphone for some time now, but just noticed that when playing music from the ipod built-in to the iphone, the music is only coming from one speaker (the one on the bottom left).
Is that normal? I would assume both speakers would be used?
I checked the settings and couldn't find a setting for "stereo sound" and did a forum search and couldn't find an answer.

fair enough i didn't think i had posted it in the right forum, so i posted it in the ipod/audio one as well....
anyway, thanks for the answer.

AUdigy 4, poping sound from left speaker ?

So i get this poping sound from my left speaker, but the right speaker is ok. I use Audgigy 4.

Hi moon, and welcome to Apple Discussions.
Sounds like it's time to speak with someone higher up, and politely explain the situation to them. If no luck there, call Apple Customer Relations. Make sure you get case numbers for each time they attempt to fix something.

Audigy SE "hissing sound" on "line in&qu

i just installed my new audigy SE
i have my sirius radio plugged into the "line in" with a brand new stereo cable
when i go to "playback control" and un-check the mute box under "line in" i can hear a hissing sound
it's not really loud but it's loud enough
is that just because this was a cheap $30 card ?
i've tried both the driver that came on the cd and downloaded the latest driver and i get the same hissing sound

i guess i have to take it back and get the better one
any recommendations?
i just need it for 2 channel stereo listening and recording from my Sirius radio

Stereo sound from netbook

Hi all - have just bought an HP Netbook 110-3104 - it seems to suggest it has 2 speakers however only sound comes out of one.
When I try the same sound via headphones - then sound in stereo.
Do the netbooks play in stereo ? - (if not why do they appear to have 2 speakers)
Thanks
Brian

OK...So this notebook comes with single Speaker only to the the best of my knowledge...
Although I am an HP employee, I am speaking for myself and not for HP.
Make it easier for other people to find solutions, by marking my answer with 'Accept as Solution', if it solves your problem.
Click on the BLUE KUDOS button on the left to say "Thanks"

No sound from Line-In...?

I just bought a new Recon3D card. I was having problems with my X-Fi Titanium card, and so on a whim I just bought a new card. My problem is this...
I have some DJ equipment going into the Line In on my sound card. I can not hear it when it is playing. I can see the level meters moving. I can record the audio on my PC and then play it back, but I can't hear it when it is playing.
I used to have this same problem on my X-Fi... it would just "mute" all of a sudden, and I would have to go into the Console to un-mute it. Well.... this time it isn't muted, but I still get no sound. I have looked and looked until I am falling asleep, and I can't find an answer. The answer that 99% of people give is "un-check the mute button..." but I assure you, it is not on mute on the new Recon console.
Does ANYONE have anything that can help me? As a DJ, I kinda need to hear what I am playing.
Oh, and when I click "listen to this device" on the listen tab I can hear it, but it doesn't sound very good and has a good 2-3 second delay.
Seriously, any help would be appreciated!!

Ok, so I wiped Windows and installed Windows 8... and I still have the SAME problem.
Does anyone have any IDEAS even?

Is it possible to record sound from line out ?

Hi,
I am wondering is it possible to capture the live audio which is coming out to headphone, using Java Sound API?
I have searched through the Java Sound API and looks like it is impossible. So I want some experience guys throw some light on this.
Thanks.

I have the same question more or less. Can an HDMI to Thunderbolt adapter cable be used to capture video into iMovie?

Strange Line In problem with my X-Fi Elite Pro. Stereo sound comes and goes

I have an X-Fi Elite Pro with latest drivers installed. Everything works fine, except for the Line In port in Entertainment mode. I have an AverMedia TV/FM card and its audio output (stereo) is plugged in my X-Fi's Line In/Mic In (PCI). The problem is that I get sound only from the right channel but not from the left one, so the sound comes out in mono. From time to time, I get to hear in stereo (both channels) but it seems a random event. This input works just fine in Game and Creation modes btw.
Stereo sound from this particular input comes and goes in random order and sometimes I get about 50% on the left and 00% on the right channel. Sometimes, left channel volume fades in and out slowly. I already did some troubleshooting such as set Line in/Mic In/Digital In to "Line In/Mic In", speaker diagnostics, checked it in Game & Creation modes, turned to default values and so on but I still get this problem.
Seems pretty wired. A ghost in the machine! Creative products never seize to amaze us!

Soo...your're calling me stupid? Well, perhaps your right, but then again, I might have a point!
Read my post again.
If you still think it's too low with SVM enabled and everything is turned up...then I'm affraid you're out of luck and might consider buying another speaker set, if it's a major issue to you.

Live5.1: Is surround or 4 speakers from line-in VCR poss., surround ev

I have finally got two pairs of powered speakers to plug into my Li've5. X-Gamer boxed card I got a few years back. When I play mp3s or CDs music from the pc CD player both the line out and rear outs play, both the same stereo i guess, when I turn both pairs on. I don't know whethere or not it has mattered what Sounds, settings in Windows XP I have as speakers type set to in Control Panel. I have NO creative software installed. Just what windows update gave me when it recognized my card. I am using WMP9. My CD player is a Pioneer DVD-6 non-tray (so it has no digital output), but I do have the CD audio line connected to the Li've 5. card, as well as the pci slot. I have never tried a surround DVD movie so I don't know if 4 speakers is giving me surround or not. I have a cheesy DVD or two, and I am getting sound from 4 speakers, but I'm not sure if it is in "simulated surround" or dolby surround (or a simulated 4 speaker version of dolby surround).
There is a line-in on the back of the sound card, and I have JUST plugged in a hi-fi VCR. With both pairs of speakers on, I get no rear sound channel. Therefore, definetly no 5.:
Questions
: Is it possible to get rear channels as well from line in (dual stereo) as above from line-in?
2: Is it possible to get a surround-loaded stereo signal from line-in (VCR) decoded into both the line outs and rear outs, as either Dolby SURROUND , or simulated SURROUND?
3: Is it possible to create Surround effect out of mp3s or pc CD music in 4 speakers?
4: Do I need to install the creative software?

I have finally got two pairs of powered speakers to plug into my Li've5. X-Gamer boxed card I got a few years back. When I play mp3s or CDs music from the pc CD player both the line out and rear outs play, both the same stereo i guess, when I turn both pairs on. I don't know whethere or not it has mattered what Sounds, settings in Windows XP I have as speakers type set to in Control Panel. I have NO creative software installed. Just what windows update gave me when it recognized my card. I am using WMP9. My CD player is a Pioneer DVD-6 non-tray (so it has no digital output), but I do have the CD audio line connected to the Li've 5. card, as well as the pci slot. I have never tried a surround DVD movie so I don't know if 4 speakers is giving me surround or not. I have a cheesy DVD or two, and I am getting sound from 4 speakers, but I'm not sure if it is in "simulated surround" or dolby surround (or a simulated 4 speaker version of dolby surround).
There is a line-in on the back of the sound card, and I have JUST plugged in a hi-fi VCR. With both pairs of speakers on, I get no rear sound channel. Therefore, definetly no 5.:
Questions
: Is it possible to get rear channels as well from line in (dual stereo) as above from line-in?
2: Is it possible to get a surround-loaded stereo signal from line-in (VCR) decoded into both the line outs and rear outs, as either Dolby SURROUND , or simulated SURROUND?
3: Is it possible to create Surround effect out of mp3s or pc CD music in 4 speakers?
4: Do I need to install the creative software?

Imac mid june 2011 ..connected toslink to optical to my hometheatre and yest io only get stereo sound..audio midi setup 5.1 is greyed out ? help ?new to mac

guys after a long time...i finally shifted to mac ...a long time windows user...so far the experience is been good..
ok here is my first problem with this setup
in india its a pain to get a toslink to mini adapter ...finally i found one and connected the mini end to headphone jack behind my imac...
(imac 21.5 mid june 2011) and optical end to my hometheatre ...
in audio midi setup the multichannel option is set to stereo 2ch 16 bit..
perian is installed and set to use dolby prologic..
i only get stereo sound from itunes,vlc or movist or even xbmc and boxee...tried them all configured the audio to use 5.1 but no luck,
questions
why is 5.1 greyed out ?in audio midi setup ?
i am using my mac to create multimedia content and knowing how the sounds created will be heard helps me a lot..
i have invested a lot (3 years savings in this mac) and i wouyld very much appreciate all your help..
i also purchased a griffin hdmi port which connects to my tv but the audio is still stereo..
finally got a toslink http://www.amazon.com/3-5MM-TOSLINK-FIBER-OPTIC-TOSLINK-mini-Toslink/dp/B00006LV F3 this one ...still only stereo...
any help would be greatly appreciated .....

Hello John, I figured it was a signal issue. All the speakers fire and the sound is great. I was running the speakers thru a Dell PC with a Creative X-Fi Elite Pro, THX Certified, 7.1 soundcard using a fiber optic from the Mac Pro to the Z906's, it worked great until the Dell died!!! When I bought the soundcard from Creative I also bought the GigaWorks S750, THX Certified, 700 watt, 7.1 speaker system, used the speakers for 11 years and then the woofer/amp said "I QUIT" Creative quit making the speaker system and the sound card. The satellite speakers from the Creative GigaWorks speaker system still sound great (rated at 78 watt each) and are a little better speaker than the one's that came with the Z906 and the wattage from the 906 is sufficient to drive the satellites without any distortion. Thank you for addressing my issue, you confirmed what I suspected all along, just needed to hear it from someone with the same setup.
One last question, I purchased a Diamond Multimedia USB Soundcard, can't use the fiber optic(not supported by Mac) but the green, tan and black RCA's plug in and produces adequetly. When you plug your 906's into the Mac Pro using the fiber optic how do you set your speaker configuration? When I plug into the mac pro with fiber optic the 'Audio Midi Setup' does not seem to see the 5.1 configuration. Any thoughts there?
Carl

Line-in sound from only one chan

Hi,
I have a problem with my new Audigy 2 ZS gamer card. I use my PC as a second TV and have the sound from the satellite box fed into the line-in jack; however, only the right channel comes through. The microphone jack works fine for both channels but the sound quality is not as good. I borrowed an identical card from a friend for testing and I get the same problem with hers - except with hers the left channel plays. Playback from pre-recorded sources is fine. The problem does not seem to be with the hardware and re-installing the drivers has not helped. Any thoughts?Message Edited by Jasperdog on -23-2004 07:05 PM

Bombaata wrote:
hi all,
just found this thread whilst looking for a solution of my problem : got an audigy ls and tried to record from a (analog) camcorder that i hooked to my tv card. the camcorder has two stereo cable/out but the audigy only one line in, hence i bought a (stereo) adapter to plug in these two lines and convert them to one. result is that i got sound on the right channel only, just like jasperdog. same prob comes up when i link my vcr to the audigy, best to my knowledge the vcr is mono. worked out well with my previous soundblaster li've! did not really get the point with the stereo adapter plug, do they sell these things for mono also ? any chance to change some settings in the driver ?
any suggestions ?
thanks in advance !
Its hard to know why this is happening, but my guess would be, your adapter could be in mono. How many black stripes are there? One or two?
The Line-In is should be Stereo, I see no reason why Creative would want to switch to Mono for this card when their older SB Li've is stereo.
Just to make sure, when you meant two stereo cable out, did you meant the White and Red RCA cable?

Audigy 4 - no stereo sound from lin

Similar Messages

Maybe you are looking for