Audigy 4 (Non Pro) and center channel surround sound - from 2 channel aud

Hi all,?Is there a way to have voice coming from the center speaker during TV programs like you could using an external receiver with Pro Logic? I can't for the life of me, get my Audigy 4 to do this. I run MCE 2005 on a couple of machines in the house. On my other machine, with built in audio, I let the Purevideo decoder handle this and I get? a nice surround, complete with center channel voice on it while watching TV. On the machine with the Audigy 4, not only will it not give me the center channel while watching TV, but I can't get it to stop processing the sound so that I can simply use the decoding of the Purevideo Decoder... Stumped!?Thanks,?Stu

Similar Messages

X FI elite pro and gigaworks s750 no sound from speakers but sound from headphones please h

hi
i own an x fi elite pro and a gigaworks s750
thing is i recently had to format my computer, before which i was getting surround sound through my speakers and headphones normally.
however i can now only get sound through my headphones.
I have the latest drivers installed and i am bald due to pulling all my hair out
if you can help please do
appreciated
Fonz

realwiz,
There's a setting in the mixer software where it instruct the soundcard to mute the speaker when headphone is connected to the I/O dri've bay. Perhaps you can check if that setting has been enabled.
Jason

Enquiry about audigy 4 [NON-PRO] & audigy 2

Hi, I would like to make an enquiry about a few creative products.
I am currently intrested in getting a T7900 speaker system.
However i have doubts on the soundcard that i should get.
Could anyone identify the difference with a Audigy 4 [NON-Pro] and a Audigy 2 ZS.
I couldn't find any through comparison on these 2 products in the whole creative website.
And also, is the T7900 7. speaker system compatible with either of the 2 audigy sound cards.
Which card would you recommand me to go for too.
Thanks in advance. =)Message Edited by kutysam on 02-8-200603:48 AM

Well im feeling lazy ATM so I have no technical data to pass on. I would say thought the differents are :
: Price,, hmm get which is cheaper
2: The Audigy 4 would have ( at a guess anyway?)?more settings/tools and banks for media creation and the like.
Other than that, not a great deal between them. As far as games go, they both do the very same thing and with DVD movies they would produce the same rates as with music.
Id say, get the ZS if your into games and DVDs+music, or get the A 4 for the same reasons + Media creation/mixing and stuff like that.
Like I said, to lazy to research it further but close enough

Audigy 4 non-pro, multimedia probl

Hi there,
Got the Audigy 4 non-pro card, and I'm sticking with it for a long time... but it does have a few problems, I was hoping some of you may have the same problems and could help me. The first one may not be a problem with the card itself.
The thing is, I have a certain DVD-title that has Linear PCM Stereo and DTS-Digital 5. Surround soundtracks. The stereo works fine (let's say in Windows Media Player), but when I switch to DTS (hoping for a surround experience), there is no sound! I am able to have surround sound with most DVDs, although it's usually Dolby Surround. Do I need special software to play DTS soundtracks? I know that PowerDVD (or whatever its' name) has to be upgraded for DTS, but the Windows Media PLayer does have a DTS logo thing, when I play it, but there is no sound!
The other problem seems to be more serious.
When I work with MIDI, or play MIDI files, there's a strange lock-up of the system, although on an irregular basis. Sometimes, suddenly, instantaneously, everything stops, and there is a sustained and quiet MIDI sounds, as though the last notes are held, and the system is in a state of complete lock-up. Does anyone have a problem with taht? Or a solution, even better!
Cheers.

I think you should try some modded driver. It will provide better sound. Try these following links and find out which driver will give your favorite sound. But remember to back up your system (system restore is a good choice before doing so)
YouP PAX Fi 3.33 For X-FI:
http://youp-pax.com/youp/YouP-PAX-Fiv3.33-XFi.rar
YouP PAX A4 3.33 For Audigy X:
http://youp-pax.com/youp/YouP-PAX-A4v3.33.rar
and many other:
PAX-TH 76.92MB.
Soft for PAX VI v? PAX ZS
http://file2.mydrivers.com/sound/PAX-TH.ZIP
http://file.mydrivers.com/sound/PAX-TH.ZIP
http://file3.mydrivers.com/files/sound/PAX-TH.ZIP
http://file4.mydrivers.com/files/sound/PAX-TH.ZIP
http://crc.mydrivers.com/sound/PAX-TH.ZIP
http://sc.mydrivers.com/sound/PAX-TH.ZIP
Links for Pax VI Ultra (Li've! series on WinXP SP2) 62.4MB
http://file2.mydrivers.com/sound/YouP-PAX-VI-Ultra.exe
http://file.mydrivers.com/sound/YouP-PAX-VI-Ultra.exe
http://file3.mydrivers.com/files/sound/YouP-PAX-VI-Ultra.exe
http://file4.mydrivers.com/files/sound/YouP-PAX-VI-Ultra.exe
PAX VI .68 7.7MB
http://file2.mydrivers.com/sound/YouP-PAX-VIv.68.rar
http://file.mydrivers.com/sound/YouP-PAX-VIv.68.rar
http://file3.mydrivers.com/files/sound/YouP-PAX-VIv.68.rar
Zhengzhou downloads 4
http://file4.mydrivers.com/files/sound/YouP-PAX-VIv.68.rar
http://crc.mydrivers.com/sound/YouP-PAX-VIv.68.rar
http://sc.mydrivers.com/sound/YouP-PAX-VIv.68.rar
Links for ZS2.66( d?nh cho Audigy, Audigy2(ZS))
http://file2.mydrivers.com/sound/YouP-PAX-ZSv2.66a.exe
http://file.mydrivers.com/sound/YouP-PAX-ZSv2.66a.exe
http://file3.mydrivers.com/files/sound/YouP-PAX-ZSv2.66a.exe
Soft for cho Audigy2 (262.73M)
http://file2.mydrivers.com/sound/A2-ZS-PAX.exe
Http://file.mydrivers.com/sound/A2-ZS-PAX.exe
Http://file3.mydrivers.com/files/sound/A2-ZS-PAX.exe
Http://file4.mydrivers.com/files/sound/A2-ZS-PAX.exe
Http://crc.mydrivers.com/sound/A2-ZS-PAX.exe
Http://sc.mydrivers.com/sound/A2-ZS-PAX.exe

What happened to the Audigy 4 (non-pro) drivers on the websi

I swore a week or so there were seperate drivers for the new Audigy 4 (non-pro) on Creative's site. Now only the Audigy 4 Pro is shown under the download options. What happened? I was going to just use the online drivers with the audio console for an easy install and to ensure I have the lastest drivers.

Try download them MANUALLY. They're 5.2..6-2.08.00.000.
.jtpMessage Edited by jutapa on 09-3-2005 04:45 AM

Audigy 4 (non-Pro) driv

Hi,
Quick question, really. I have tried searching, but I can't seem to find the answer (one way, or another) that I am looking for.
I am running Windows XP, and I have a Creative Audigy 4 (non-pro) sound card. I am using the January 2006 drivers, which Creative have listed on their web site.
But I was really just wondering if there were any other drivers for this card that I am unware of and that I could try?
I am thinking of more recent beta drivers, popular modded drivers, or other Audigy (, 2, etc) drivers that people have used with their Audigy 4.
If not, have Creative publically stated that they plan to release a new driver set for the Audigy 4?
Appreciate any help on this one,
Jon

I think you should try some modded driver. It will provide better sound. Try these following links and find out which driver will give your favorite sound. But remember to back up your system (system restore is a good choice before doing so)
YouP PAX Fi 3.33 For X-FI:
http://youp-pax.com/youp/YouP-PAX-Fiv3.33-XFi.rar
YouP PAX A4 3.33 For Audigy X:
http://youp-pax.com/youp/YouP-PAX-A4v3.33.rar
and many other:
PAX-TH 76.92MB.
Soft for PAX VI v? PAX ZS
http://file2.mydrivers.com/sound/PAX-TH.ZIP
http://file.mydrivers.com/sound/PAX-TH.ZIP
http://file3.mydrivers.com/files/sound/PAX-TH.ZIP
http://file4.mydrivers.com/files/sound/PAX-TH.ZIP
http://crc.mydrivers.com/sound/PAX-TH.ZIP
http://sc.mydrivers.com/sound/PAX-TH.ZIP
Links for Pax VI Ultra (Li've! series on WinXP SP2) 62.4MB
http://file2.mydrivers.com/sound/YouP-PAX-VI-Ultra.exe
http://file.mydrivers.com/sound/YouP-PAX-VI-Ultra.exe
http://file3.mydrivers.com/files/sound/YouP-PAX-VI-Ultra.exe
http://file4.mydrivers.com/files/sound/YouP-PAX-VI-Ultra.exe
PAX VI .68 7.7MB
http://file2.mydrivers.com/sound/YouP-PAX-VIv.68.rar
http://file.mydrivers.com/sound/YouP-PAX-VIv.68.rar
http://file3.mydrivers.com/files/sound/YouP-PAX-VIv.68.rar
Zhengzhou downloads 4
http://file4.mydrivers.com/files/sound/YouP-PAX-VIv.68.rar
http://crc.mydrivers.com/sound/YouP-PAX-VIv.68.rar
http://sc.mydrivers.com/sound/YouP-PAX-VIv.68.rar
Links for ZS2.66( d?nh cho Audigy, Audigy2(ZS))
http://file2.mydrivers.com/sound/YouP-PAX-ZSv2.66a.exe
http://file.mydrivers.com/sound/YouP-PAX-ZSv2.66a.exe
http://file3.mydrivers.com/files/sound/YouP-PAX-ZSv2.66a.exe
Soft for cho Audigy2 (262.73M)
http://file2.mydrivers.com/sound/A2-ZS-PAX.exe
Http://file.mydrivers.com/sound/A2-ZS-PAX.exe
Http://file3.mydrivers.com/files/sound/A2-ZS-PAX.exe
Http://file4.mydrivers.com/files/sound/A2-ZS-PAX.exe
Http://crc.mydrivers.com/sound/A2-ZS-PAX.exe
Http://sc.mydrivers.com/sound/A2-ZS-PAX.exe

5.1 X-gamer and center channel of 5.1 speak

Hello,
first post may as well be a good one..
Ive read the FAQ and tried the options listed. im working with a week old install so not much on the dri've other than world of warcraft and MS office. Im running windoze XP pro on a AMD Sempron 2500+(.75ghz) with gig of ram and a nvidia GEforce6800GT video card. I have had this sound card a while, like 5 or 6 years. Ive connected a brand new Logitech X-5530 sound system to my X-gamer 5. sound card. everything sounds awesome excpet the center channel. Ive connected the center channel to the main output jack and got sound, so i know the speaker is functioning. the sub and center channel share a line on the X-530 speaker wires and the sub is working. however i get no sound out of the center channel. I tested this with the Creative Audio HQ panel set on 5. speakers. all other channels i hear the "front right, front left" etc... but center channel is totally silent.
any ideas?

Hmm, first go through windows control panel - sound and Audio Devices. Ensure you card is selected in all setup menus.
If "use only default devices is ticked, untick it.
Try S/PDIF and see if that works.
D/L this program - ?rightmark-3dsound-2.2 and run it just to tes things.

Outputting 5.1 Channel Surround Sound from your Mac

How to output 5.1 Channel Surround Sound from you Mac...

I have been using my MacBook Pro via HDMI into my pioneer av amp which is set up for 5.1.
I have been able to output 5.1 audio with Logic Pro and FCPX no issues at all after you setup the audio midi utility for 5.1. This setup is via PCM 5.1 audio not to be confused with Dolby 5.1.
It works great. If you want to play your edited exported movies from Final Cut Pro x in surround then it gets a bit tricky. I export the movie with FCPX as master video with the 5.1 audio then use HandBreak set to atv3 to encode / compress the video. This is great because handbreak folds the 5.1 into a stereo AAC track and also encodes the 5.1 mix into Dolby 5.1 AC3 track so both stereo and surround tracks are embedded in the movie file. So if you have an Apple TV it will play the movie with its surround track. If you play the same HandBreak compressed movie out of your Mac via hdmi to your surround amp it will only play the stereo track if you are using iTunes or QuickTime and I believe this is because of copy protect and Dolby license issues. iTunes will play a purchased movie from the itunes store in surround via your Macs hdmi to receiver setup but will only play the stereo track of the movie you exported from HandBreak even though it is set up just like an iTunes movie. To get your HandBreak movie to play in Dolby surround from your Mac all you need is VLC player, then you have to go in and select the Dolby track and the output in VLCs audio settings and bingo your HandBreaked movie then plays out of your Mac in Dolby surround. Once you set your Mac up for 5.1 mixing your amp will show your outputting 5.1 via the mac but again this is PCM audio 5.1 and apps like FCPX, Soundtrack Pro, Logic Pro will work.

Macbook Pro not seeing my surround sound interface

I use a PreSonus Firebox interface to output surround sound from Logic 8. It worked fine on my previous computer, a standard MacBook. I recently upgraded to a MacBook Pro and it won't show up in Logic or the computer's own System Preferences. I never had a problem with it on the old computer so I'm wondering if there's any trick to get it to show up on this now one.

I see that some people earlier this year had this same problem where there was mentions of chip sets and drivers. It doesn't look like anything really was resolved, but one person said that he fixed his problem by downloading a firmware update from the PreSonus site. So I went there and tried downloading the "FireBox Mixer application and Control Panel (10.3.7 - 10.5+)" but the downloaded file is invalid and won't open. Drag.
http://discussions.apple.com/thread.jspa?threadID=2384498&start=0&tstart=0
I also wanted to add that I get all blue lights on the Firebox itself, never any red lights. So I'm still searching the internet for a solution...

I have moved from a G5 Powermac to an Intel Mac Pro and am porting over Items from a Backup HDD. How can I access and use drawings and documents created on the PC computer on the Intel computer ?

I have moved from a G5 Powermac to an Intel Mac Pro and selectively porting over items from a backup hard drive.
How can I access and use documents and drawings created on the PC based computer ?

Clarisworks, you need Appleworks, which will only work with Mac OS X10.6.8 or earlier. See this tip if you must go newer. Mac Pros with newer hardware configuration than July 20, 2011 can't use Mac OS X 10.6.8 or earlier without this tip and then it would be Mac OS X Server. I'm not sure if the new black Mac Pro supports that configuration or not.
iPhoto, there is an iPhoto for all versions of Mac OS X.
iTunes, there is an iTunes for all versions of Mac OS X. Note with iTunes versions 11 and later, which are needed for syncing with iOS 7 or or later, you will lose coverflow, if you liked that feature. Sadly you can't run an older version of iTunes from within Mac OS X 10.9 or later.
Sketchup: http://help.sketchup.com/en/article/60107 shows the versions that will work with intermediate Mac OS X versions, and this shows the latest version: http://help.sketchup.com/en/article/36208 be sure to click on the operating system you choose to use.
GIF - Viewing GIFs Apple's Preview can do that. Editing them, I like http://www.lemkesoft.com/ Graphicconverter.
DMG is able to be opened by all versions of Mac OS X. This are just "disk images" which store programs on a virtual disk that will open when double clicked. Frequently you'll find the installer of the said program inside. To find out if the program itself is compatible with 10.7 through 10.9, see http://www.roaringapps.com/
Otherwise see the resources on:
https://discussions.apple.com/docs/DOC-2455
If you end up deciding to stick with Snow Leopard.

I just bought a new Macbook Pro and loaded all my info from My old Macbook...now i can't remember for the life of me my Admin Password 9which i created 3 years ago)...is there ANY WAY to bypass this on my new Macbook Pro and begin again...?

i just bought a new Macbook Pro and loaded all my info from My old Macbook...now i can't remember for the life of me my Admin Password (which i created 3 years ago)...is there ANY WAY to bypass this on my new Macbook Pro and begin again...?

I assume that you don't have the installation discs, so:
1. Reboot
2. Hold command + s key down after you hear the chime.
3. When you get a text prompt enter in these terminal commands to create a brand new admin account (hitting return after each line):
(Type these commands very carefully)
mount -uw /
rm /var/db/.AppleSetupDone
shutdown -h now
4. You will go through the setup process again, create a new admin account, login to it and then change your existing account password or whatever else you need to do. You can delete the account you made in this process, or not.

Hi All, I recently bought a Mac Book Pro and transferred all my photos from my hard drive onto the Mac. I realised that there were some folders which didn't have the camera information embedded in the files and these files refuse to open on iPhoto. HELP!!

Hi All, I recently bought a Mac Book Pro and transferred all my photos from my hard drive onto the Mac. I realised that there were some folders which didn't have the camera information embedded in the files and these files refuse to open on iPhoto. I know that the folders that have the problem were not transferred to the hard drive via a photo transfer application (I have a Canon camera) but I simply copied them out of the photo card and onto my old PC.
Is there some way I can open these pictures on my Mac? They work fine on a PC.

Thanks for your reply.
The files don't open in preview either. In preview I get the error message 'The file "xxxx_xxx.jpg" could not be opened. It may be damaged or use a file format that Preview doesn't recognize'. The folders with these un-openable pictures do not even get imported into iPhoto. When I try to import them I get an error message about the files being unreadable.
The color profile information on the un-openable files is not visible but I see that all the other files from my old drive are RGB.

I want to access my library on my macbook pro and copy work done away from home from my imac how do I do this?

I want to access my library on my macbook pro and copy work done away from home to Aperture on my imac how do I do this?

Are you working on images on both machines?
If you want to round-trip images, you can export a project as a library from your iMac, copy that to your MacBook Pro, and then edit the images there. When you're done, copy that library back to the iMac and import it to your iMac. The iMac should recognize the changes you've made and update its images.
Read the Aperture help file, which will guide you to the Aperture manual. It can walk you through this. You have to be careful to do it correctly, but I've done this a few times and it works quite well.

I bought a new McBook Pro and when I backed up from my old computer, the iCal on my new computer is not syncing. It says "The server did not recognize your user name or password for (name of my mobile me acct). Make sure you enter them correctly."

I bought a new McBook Pro and when I backed up from my old computer, the iCal on my new computer is not syncing. It says "The server did not recognize your user name or password for (name of my mobile me acct). Make sure you enter them correctly." Any suggestions?

Carla,
Check this post for a possible solution.

Mac mini 2014 won't do 5.1 surround sound from HDMI port

I can't seem to get my Mac mini 2014 to do 5.1 surround sound from the built-in HDMI port to my home theatre system. When I run the Audio MIDI Setup program the only option is 2ch-24bit (stereo). Now I didn't have this issue when I tested it with a Mac mini 2012 running 10.9.5. It allow me to select 6ch-24bit (5.1) and Encoded Digital Audio. I also don't have an issue with the Mac mini 2014 if I use a Belkin Mini DisplayPort to HDMI Adapter connected to one of the Thunderbolt 2 ports. It does 5.1 surround sound just fine. So is there something wrong with the built-in HDMI port on the Mac mini 2014 or OS X 10.10?

Hello mrbraindead,
Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
I understand you are having problems with your VLC audio since updating to Windows 8.1. I am providing you with a link to a thread I found on en.Kioskea.net titled VLC video player suddenly has no sound. There are numerous solutions provided here which is why I am providing you with the link. I would review the posters solutions and ensure that you have checked all the suggestions they make.
Please re-post if you require additional support. Thank you for posting on the HP Forums. Have a great day!
Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
Dunidar
I work on behalf of HP
Find out a bit more about me by checking out my profile!
"Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

Audigy 4 (Non Pro) and center channel surround sound - from 2 channel aud

Similar Messages

Maybe you are looking for