Audigy 4 platinum pro Microphone im

Simple one here, i'm just about to buy some leads to connect my condensor mic to my external hub. I just bought a preamp, yet don't have all the leads for it to work. Will a 'balanced /4" TRS connector' fit into the 'Mic imput'/'line-in' of my Audigy 4 platinum pro soundcard? This is opposed to an 'Unbalanced /4" TS connector'. Help will be appreciated! Carry on being CREATIVE
P3U6!SUn 3H+

Hi there,
I nearly freaked out when I got the platinum pro as I thought I could get no decent power in direct guitar and microphones. You said you bought a preamp, but there is a preamp switch for Line In/Mic on the front of the hub. I have been using this for boosting mic and guitar signals and it is okay but was wandering what preamp you bought and if you rate it.
Hope I haven't upset you by telling you about the built in pre-amp as it probably isn't the best quality anyway.
Cheers,
Paul D.

Similar Messages

Audigy Platinum Pro does not work for microphone!!! CREATIVE HE

I recently bought the Audigy 2 ZS Platinum Pro mainly for guitar recording. The external unit that i plug my guitar into plays alright through the LINE IN 2 (I find it works better when you don't put a line out to your amp), though not spectacular, but does not play at all through the LINE IN which is designated mainly for a microphone (which i use for acoustic guitars). Even when I try plugging the mic in LINE IN 2 I have to scream to make it just register, and when I do it sounds fuzzy and barely audible. When I first bought it a fortnight ago it seemed to work ok, there appears nothing wrong with my sound blasters and i have tried the recording on a number of different software programs.
The recording dial is cranked and although i don't seem to have the option to use the mic boost which seems strange as it is a powerful computer, the recording level on the sound desktop does not make a difference.
Can anybody help me with this? Is CREATIVE aware that this is common complaint and are avoiding the issue?
Is it something wrong with the hardware or the operating system - Windows XP Home?
If so, should I take the soundcard back? The recording capabilities were the reason i bought this card!

Update.....
Anyway, to resolve this problem (after some discussion direct with Creative Support) I discovered that there is a trick in the Creative Surround Mixer that is not explained (at all) in the documentation, not is it very intuiti've.
In the part of the mixer with all the sliders the box on the left (ie. vol, bass, treble) is the master speaker volume, the box on the right with the single slider is the recording level (the icon above the slider selects the source) and all the sliders between the two boxes control the levels of each source going to the speakers. To ensure a pure recording and prevent any of the input sources going to the speakers you will need to mute any input devices you have connected in this section.
To put it simply, if you don't want your microphone input to go to the speakers mute them in the mixer. Only the single slider in the box on the right hand side of the mixer panel will set recording levels.
Hope this hel
ps.
<IMG height=6 src="http://forums.creative.com/i/smilies/6x6_smiley-happy.gif" width=6 border=0>

Audigy 4 Pro microphone problems in Win 7 64-bit

Hi there,
Since I put my Audigy 4 Pro card into my newer PC with Win 7 64-bit the microphone only seems to work when it wants to, or works but sounds messed up.
I've waited a while before posting about this because I thought the newer drivers would sort out the problem, but it remains the same.
The card/microphone works without a problem if I put it in a PC with Win XP.
Sometimes the microphone will not pick up any sound at all. Other times it will work, but only for? game, say Heroes of Newerth. Then in Windows using teamspeak, people describe the sound like I'm talking through a fan. Tried using the in-game VOIP but I get the same result.
After a restart or just some random day, people in Heroes of Newerth would discribe the VOIP from my side as if I was talking under water(or through a fan), but then it would work fine for teamspeak or Bad Company 2 or any other game. I used these 2 games as an example since its what I'm playing mostly at the moment.
There doesnt seem to be any consistancy with the problem.
I have recently removed the sound card from my PC and now forced to use the onboard sound that reminds me of the sound of a clockradio.
My PC specs are:
Asus Rampage Formula Motherboard
Intel Core 2 Duo 3.0GHz E8400
8GB RAM
4 x WD Raptor HDD Stripe RAID
ATi Radeon 4870 52MB
Sound Blaster Audigy 4 Pro?(model number shown?is SB0290)
Using?a Sennheiser PC350 Headset.
What I have tried my side so far:
Tried latest and older drivers for Win 7 64-bit
Reinstalled Windows 7 several times with different drivers.
Tried disabling all devices except for line/mic
Tried other input devices.
Tried with different audio and sound codecs, tried without any.
Might have been or 2 other things I tried I cannot think of now.
Is there anyone that experienced similar problems and got it fixed? Any help would be appreciated.

Hi Bill,
Can you be more specific about which steps were not recorded?
There some things that will not be recorded. The release notes list some known issues.
Known Issues:
Tutorial Builder can only capture actions in Photoshop that are recorded by the ScriptListener plug-in. While this includes most of Photoshop's functionality, some features/tools are not recorded. In particular, brushing actions are not captured. We hope to address this in future releases of Tutorial Builder.
Some of the the actions that Tutorial Builder captures are not yet instrumented to produce detailed text instructions in the final tutorial. For such actions, the generated tutorial will include a step that says "The (action name) is not yet supported by Tutorial Builder," and the tutorial author will have to edit the HTML to provide more descriptive text. Note that the "Show me in Photoshop" link is still generated for such actions.
Some Photoshop actions allow the user to specify a set of parameters in multiple ways, but Tutorial Builder cannot detect how the user specified those settings during the recorded demonstration. Thus, the text in the generated tutorial may not describe exactly what was demonstrated. For example, in the Image > Adjustments > Levels tool dialog box, you can update the parameters using three different eye droppers. Since Tutorial Builder does not know which (if any) of these eye droppers were used, the text for a Levels adjustment does not describe exactly how the settings are specified. Again, the tutorial author can simply edit the HTML to provide a more accurate description.
Thanks!
Mira

Audigy 2 ZS Platinum Pro Microphone Probs

Hello, I have had a frustrating time getting my microphone to work consistently using this card and Windows 7 x64. Here is what is happening:
Usually when I first boot up, my microphone will not work with Ventrilo or Windows Sound Recorder (no bars in the recording meter). If I enable Line in playback I can hear myself crystal clear all of the time so this is a good control. The mic is working, but the input isn't being passed onto programs. If I open/close ventrilo maybe 20-30 times I will be able to get the microphone to work. Usually it first starts out choppy after about 5 ventrilo open/closes and then it is finally sounds good. When I first get started trying to get the microphone to work, I won't see the green bars light up in the equalizer for the mic recording device. But once it gets started, I see the lights working. I DON'T CHANGE ANY SETTINGS BETWEEN WHEN THE MIC WORKS AND DOESN'T WORK. It just starts to work. My friend says getting my mic to work is like starting up an old Model A. You have to crank on it a while.
Drivers I have tried but all behave the same:
Default Windows 7 creative Audigy 2 drivers
Updated Audigy 2 drivers (July 2009 ) 2_8_00
Daniel K Drivers (3.6)
In Windows recording devices Mic I have tried the following:
Turning On/Off "allow programs to take exclusi've control of the device"
Different bit rates
Disabling the other recording devices
In Ventrilo I have tried:
Direct Sound on/off (makes no difference), works/doesn't work both ways
Hardware Mixer NONE/Line, makes no difference.
Currently have all input devices disabled except the two below.
Code:
Operating System: Windows 7 Professional 64-bit (6., Build 7600) (7600.win7_rtm.09073-255)
Language: English (Regional Setting: English)
System Manufacturer: NVIDIA
System Model: 22-CK-NF68
BIOS: Phoenix - AwardBIOS v6.00PG
Processor: Intel(R) Core(TM)2 Duo CPU E6850 @ 3.00GHz (2 CPUs), ~3.0GHz
Memory: 644MB RAM
Available OS Memory: 642MB RAM
Page File: 594MB used, 0688MB available
Windows Dir: C:\Windows
DirectX Version: DirectX
DX Setup Parameters: Not found
User DPI Setting: Using System DPI
System DPI Setting: 96 DPI (00 percent)
DWM DPI Scaling: Disabled
DxDiag Version: 6.0.7600.6385 32bit Unicode
Sound Devices
Description: Speakers (Creative SB Audigy 2 ZS (WDM))
Default Sound Playback: Yes
Default Voice Playback: Yes
Hardware ID: PCI\VEN_02&DEV_0004&SUBSYS_20002&REV_04
Manufacturer ID:
Product ID: 00
Type: WDM
Driver Name: ctaud2k.sys
Driver Version: 6.00.000.37 (English)
Driver Attributes: Final Retail
WHQL Logo'd: n/a
Date and Size: 6/23/2009 3:39:26, 866200 bytes
Other Files:
Driver Provider: Creative
HW Accel Level: Basic
Cap Flags: 0xFF
Min/Max Sample Rate: 00, 200000
Static/Strm HW Mix Bufs: , 0
Static/Strm HW 3D Bufs: 0, 0
HW Memory: 0
Voice Management: No
EAX(tm) 2.0 Listen/Src: No, No
I3DL2(tm) Listen/Src: No, No
Sensaura(tm) ZoomFX(tm): No
Description: SPDIF Out (Creative SB Audigy 2 ZS (WDM))
Default Sound Playback: No
Default Voice Playback: No
Hardware ID: PCI\VEN_02&DEV_0004&SUBSYS_20002&REV_04
Manufacturer ID:
Product ID: 00
Type: WDM
Driver Name: ctaud2k.sys
Driver Version: 6.00.000.37 (English)
Driver Attributes: Final Retail
WHQL Logo'd: n/a
Date and Size: 6/23/2009 3:39:26, 866200 bytes
Other Files:
Driver Provider: Creative
HW Accel Level: Basic
Cap Flags: 0xFF
Min/Max Sample Rate: 00, 200000
Static/Strm HW Mix Bufs: , 0
Static/Strm HW 3D Bufs: 0, 0
HW Memory: 0
Voice Management: No
EAX(tm) 2.0 Listen/Src: No, No
I3DL2(tm) Listen/Src: No, No
Sensaura(tm) ZoomFX(tm): No
Sound Capture Devices
Description: Line-In /Mic (Creative SB Audigy 2 ZS (WDM))
Default Sound Capture: Yes
Default Voice Capture: Yes
Driver Name: ctaud2k.sys
Driver Version: 6.00.000.37 (English)
Driver Attributes: Final Retail
Date and Size: 6/23/2009 3:39:26, 866200 bytes
Cap Flags: 0x
Format Flags: 0xFFFFF
Description: "What U Hear" (Creative SB Audigy 2 ZS (WDM))
Default Sound Capture: No
Default Voice Capture: No
Driver Name: ctaud2k.sys
Driver Version: 6.00.000.37 (English)
Driver Attributes: Final Retail
Date and Size: 6/23/2009 3:39:26, 866200 bytes
Cap Flags: 0x
Format Flags: 0xFFFFF

- Tested the Daniel_k driver set. Those really didn't work unfortunately but I appreciate the effort anyone puts into releasing a third party driver set.
Also, I noticed there were more sound devices showing up in safe mode. Are those only loaded in safe mode? Specifically "Microsoft Approved Audio Drivers".
Is there a possibility of conflict?

Help! audigy platinum

hi all, today i bought an audigy platinum pro, its installed and sounds great, but i have a couple of probs......i have just a 2. analogue set of speakers for now, connested to the card. but with the card i got an external box and remote control. but the box and remote arent working! the green power light is on, but thats it. i connected a mic up to it and opened up cubasis but there is no sound. its like its just dead......is this because i havent got digital speakers connected up, or have i done something wrong!? please help!!!

It sounds like you haven't configured the whole deal. You'll find information on how to do it in each of the program or software help files.

Microphone connection problems with SB audigy 2 ZX platinum pro

I am using an old SB audigy 2 ZX platinum pro purchased back in 2004. It is installed on a PC that I stopped using it in 2005. The pc has no problems and I have started using it again.My problem is that I cannot connect the microphone. Everything was working fine at the time I was this pc including the microphone.At that time I had installed win xp pro( no service packs were available). But after I had to move physically in another location(connection and disconnections etc)and a pc format I cannot use the microphone again. I am trying to connect it to the front panel and to the appropriate places as indicated in the user manual but nothing is happening. I have connected properly the sound cart and all other components are working fine. I checked whether the microphone is checked to silent mode and all other software/di'vers nonetheless everything is working fine. I am now using Win xp pro sp3. I have contacted Creative and they told me to check the mic boost option. But there is no mic boost option now. I clearly recall that there was one when I was using this pc in 2004 under win xp pro(again no service packs were available at that time).One solution I could think is to format again and install some old version of win xp pro (say 2003 or so) and then update to current. But I do not want to format again since I do not have that version of windows available(copyright issues may also raise) plus for some other reasons I do not think I should mention them on an Internet forum. I also tried to download the latest drivers ans apps form creative ,clean installation from the orginal cd including Daniel_K pack and everything someone could think without solving the issue.Creative during our last communication in a very polite way told me to stop emailing them and try to solve the issue on my own as this product is no longer supported. One thing I neglected to mention above is that the mic boost option is available in the motherboard sound chipset. I checked it in one of my attempts to solve the problem. But it disappears when installing the SB driver. I know that if I manage to configure mic boost in the driver settings I will solve the problem.But once again there is no such option. Could you please provide with some suggestions and solutions on how to solve this?. Thank you very in advance for any suggestion and help

Anybody?

Microphone Issue - Sound Blaster Audigy 2 ZS Platinum Pro Audio C

Hey there, sorry to post but I've got a little issue which I'm sure is me being stupid but its racking my head so here it comes. I have recently started using talk programs such as vent, skype blah blah to speak to people back home and since moving abroad I have found that now I need the mic to contact these people (which it used to fine before I arri'ved on foreign soil). On clicking on volume control and advance or properties I have nothing in recording for mic and this is where im lost. If I enable the mic on any of the programs people are hearing whatever happens to be coming out of the computer speaks such as games or a movie etc. i've just tried a full removal and reinstallation of the sound drivers for the model in my comp (Sound Blaster Audigy 2 ZS Platinum Pro Audio Card).
All my mates are saying surely you cant lose mic from the volume control but yet its gone and I have no idea how to reactivate it. People seemt o think the card is buggered but it seems fine with everything else I fire out.
Any help on how stupid I'm being would be great.
Thanks in advance.

Hi Joko,
Please check your private message.

Home studio - Having Audigy 2 ZS Platinum Pro do I need a mixer for professional recordi

<SPAN class=postbody>Hi, I've got Shure PG 58 (dynamic mic) and Audigy 2 ZS Platinum Pro. Is there any sense to buy any mixer or preamp to make the quality better? Do I feel a difference using mixer/preamp ? I really don't know what is the role of the external box of AUDIGY 2 PLATINUM PRO (is it a substitute of mixer/preamp ?) Thank you in advance skorp

it depends on who you ask, but the preferable way for most people is to use a high quality outboard mic preamp and send that into the line in. This is because the mic preamps in most consumer cards are considered cheesy. So boosting the mic up with a preamp gives you the advantage of being able to use the line input with your mic which is generally better quality sound.
As i said tho, it depends on who you ask. I have a shure Beta 57 which is an industry standard for pro sound microphones. Not a $5000 recording mic. But a very good general purpose mic. I go into the audigy 2ZS's mic input. However, to do so you need a impedence transformer (about $20) and you need to wire a stereo mini plug so that it bypasses the power that the jack supplies for PC mics which require it. In any case, i do this because i'm not a subscriber to the "use a preamp into the line in" club. Yes, it will produce better tone, but the question is how much better and how much of that improvment will actually make it to your ear? Personally i have tried both ways and find the difference tobe negligable. I'm sure that could change to some extent with a different card or mic or some other difference. But for me with an audigy 2 and the shure mic with an impedence transformer i get what i feel is very good sound the way i do it. So i really don't care what some may say. (many will insist you're stupid for doing it any other way than a preamp) I've been a musician for over 3 decades now and i know the difference between good and bad sound. And what i get from this setup is very good sound to my ear. Maybe not the best, but it's no slouch !
By the way, the creative box as far as the inputs is just basically an extention of the rear panel to make for the convenience of having your connections up front.

Audigy 2 zs platinum pro - microph

Hello,?after spending about one month with vista and trying to figure out how to enable/use the microphone with the audigy 2 zs platinum pro on vista 32 ultimate I hope someone from you can help me. (FROM CREATIVE I DONT EXPECT HELP, SINCE MY SUPPORT TICKETS ARE STILL UNREPLIED)?I have tried to enable (right click on sound icon, select input device - line in as standard)Tried to find something in this forum and in others. My problem - and this I explained even to creative - is that I had to build a support/call center for a small telephone company. Everything just fine and cool with soundblaster under WinXP Pro. Now they want me to change ALL stations to Vista!?BUT I cant get the microphone on a testing enviroment running! Feeling really stupid after 22 Years in these branche. Is there ANY workaround available? You would help me a lot. Thank you for any support. Juergen

Problem solved.
Uninstall/Reinstall SP3 did the job
Pan

Audigy 2ZS Platinum Pro in Vista x64: "Skipping" (Distortion) when record

Hi! I've just setup Vista x64 and installed the latest Drivers for my Audigy 2ZS Platinum Pro. Besides the fact that there's no software available for convenient control of the features of my soundcard (Surround Mixer, Speaker Settings, THX Console etc.), everything is fine for playback (after adjusting the bass and treble-sliders to their 0dB-Position!). But I've got a massive problem when recording audio, or when using the microphone: I can play back sound from any source without distortion, but when recording it or using the microphone for VoIP-Applications like Skype, Teamspeak or In-game communication, I get a constant "skipping" distortion like the clicking when a CD is defective and skips.
It sounds like short disruptions which come at regular, very short intervals (approx. 0 per second or so). This effect is always present, irrespective of the load situation of the system and does not change with it. In XP32, my Audigy 2ZS still works like a charme. Furthermore, I've got a "PCI Input Device" in Device Manager with a question mark, although the Firewire-Port does work. Could this be the Gameport not beeing recognised But that's not nearly as problematic as the flaw from above... Thanks in advance for your advice!

I'd like to also add that I have been observing this same problem for quite some time now. While I do not frequently have a need to record, that is changing now and I would rather not have to reboot to Windows XP in order to have functional recording capabilities.
I am currently running a dual-boot configuration of Windows XP/SP2 and Windows Vista Ultimate 64-Bit/SP, with the Audigy 2 ZS Platinum soundcard, and the latest drivers available for the card as of today's date (0/7/2008).
A clip of audio to illustrate the problem may be heard by saving and playing the MP3 file found at http://ambress.com/audigy/audio_recording_fault.mp3. The following graphic also illustrates how the sound is like a series of recorded pulses, making recording completely useless.
I would greatly appreciate any feedback confirming this problem by Creative and what solution is available or when one is to be expected. If a solution is known by any users that perhaps I have missed in searching the forum, of course I'd be grateful for that help as well.
Thank you,
Daryl
Message Edited by Ambress on 10-26-2008 11:43 PM

Analog inputs no longer working on Audigy 2 ZS Platinum Pro's external dr

I have an Audigy 2 ZS Platinum Pro. After two years of use without problems, the analog inputs on the external dri've have stopped working. I get no signal from them, not even noise. All 3 inputs are silent, Line in / Mic and Line 2 in the front, and Line 3 in the back. Otherwise the dri've appears to function normally - I get output from the headphone jack, and the volume control knob works. I have not tested digital inputs or outputs, as I currently have no digital devices to connect to them.
I had made no major changes to my computer - software or hardware - when the problems began. I recently added a new SATA hard dri've, but the Audigy dri've did work after that.
I've taken steps suggested in another thread on this forum and uninstalled all Creative software and drivers, used the latest driver package's uninstall program as well as Driver Cleaner, and finally manually deleted everything related to Creative and Audigy from the system registry (and rebooted quite a few times in between). I then installed the original drivers from the CD that came with the sound card (a setup that has worked before), but still the problem persists.
Any ideas on where to even begin looking for a solution? I find it hard to believe that it's a hardware problem, since three inputs suddenly went silent at the same time, and no other connections were affected. Yet I've done as clean a reinstall as possible, and that hasn't solved the problem.
My current computer configuration:
OS: Windows XP Pro (SP2 and all latest updates)
CPU: Athlon XP 500+
RAM: 2x 52 MB
Motherboard: Abit AN7 (integrated sound chip disabled)
Video card: Sapphire Radeon 9800 Pro
Network card: D-Link DFE-530TX
Hard dri've : Seagate ST320026A, 20 GB IDE
Hard dri've 2: Maxtor 6L080J4, 80 GB IDE
Hard dri've 3: Seagate ST330083, 300 GB SATA-II

I don't have a Platinum Pro or the dri've, but a general hardware troubleshooting step I would take would be to remove the soundcard and either move it to another slot or re-seat it. Also, I'd disconnnect and reconnect all cables to and from the card and the dri've. If I had another machine I could try the card or dri've in, I'd do that. If I could borrow another dri've or even another card, I'd test those too. (Swapping parts is often the simplest diagnostic.) Yeah, maybe it's not a hardware problem, but I'd take these steps just to rule out some possibilities.
Edit: And if you can remove or disconnect the SATA dri've and restore the system to the condition before you installed it, that's another good test.Message Edited by Katman on 2-8-2005 2:56 AM

SB Audigy Platinum Microphone Line2/Mic2 settings h

I have the original SB Audigy Platinum that includes the external bay device. When plugging a headset into the headphone and line2/mic2 connectors, the headphones work and the microphone on the headset does not. I have done some investigation and it appears that the default audio in device is the microphone. I believe that the microphone points to the mic in connector on the PCI soundcard. If I use the Sound Mixer I can manually change the audio in from microphone to line/mic2 and the headset microphone works. However if I stop the using the microphone and then try and use it again I discover that the setting has been changed back to microphone. So everytime we want to use the microphone we must go to the sound mixer and manually make the change. Is there anyway to save the setting line2/mic2 to make it permanent? One of the reasons for having the external bay device to allow the headet to be connected and disconnected without reaching around the back. I am tryng to make this easy for my wife to use (with Skype) without the hassle of the extras ste
ps.
Thanks.

Jeremey, thanks for your reply. This is one of those classic issues where the application folk (like IM clients and Skype) say to ask the SB folk what can be done and you (the SB folk) ask if the application owners can change their applications. So I am exploring options. Gi'ven that we don't use the 'mic in' (mic - microphone) connector on the PCI card, is there any way to reset the Audigy so that the external bay line/mic2 can be recognized as mic or the microphone? Perhaps there's a jumper or soft switch setting? Otherwise, is there anyway at all from the SB side (card, jumpers, drivers, Creative apps) to set the microphone to line2/mic2? Like I say I am looking for ideas from the SB side.
Thanks again for your reponse.

HELP! Hey, (Yeah YOU!) I need some HELP with an OEM Audigy 2 ZS Platinum Pro SB0360 installat

Hi Everyone.
I'm new here so I'll try to be kind and make lots of helpful friends, especially folks at CL.
Do you like a challenge?
Try this on for size.
My problem.
I'm working on a PC for a doctor friend. It's a Gateway P4 dual 3.0 gHz "Media Center" unit.
He let the antivirus proggie lapse and it was full of spybots, trojans and some missing stuff his kids (he says) had done (little kids like to click on stuff and he has 4 kids under 6 years old...).
Anyway, I needed to re-install the whole system back to the original state. GW2K docs seemed to make that a piece of cake.
Everything went well until the turkeys at GW2K threw me a curve - their CD re-install system just stinks. The CDs don't seem to AUTOSTART very well, the OS looks different than original (fo example - just plain ole XP Home instead of the neat-looking "Media Center" branding on the startup splash page), and then I got to a real problem.
The SB0360 Audigy 2 ZS (Platinum Pro, I think) driver from GW2K installed OK, but the associated apps CD keeps spitting back that it doesn't find a "Sound Blaster" card.
The Device Manager says its a Creative SB Audigy 2 ZS.
I've tried to use updates from CL but they also spit at me - "No Sound Blaster found, Exiting".
It seems that the Plug and Play only likes the GW2K driver, but the Apps CD don't like the "Creative" part, and so it balks. The CL drivers give the same message.
GW2K tells me to contact Creative Labs or (haaaa) SAM'S, the purchasing store.
Talk about the royal runaround...
Anyway, anyone got any good ideas?
I can't seem to find anything on the net to help.
I'm about Google-ed out.
Thanks in advance!
P.S.
I do have sound, Music CDs play fine and Windows sounds work OK.
I just need to install those Audigy Apps from the GW2K CD...
Message Edited by GrimWeeper on 2-02-2004 03:0 AM

Anybody wants to help me ?I wait your answer for my question...!
Thanks

Need help connecting Audigy 2 ZS Platinum Pro to ATI All-in-wonder 9600XT to get sound from tv tu

Recently purchased an Audigy 2 ZS?Platinum?Pro sound card. I need help figuring out how to get sound when I us the tv tuner for my?All-In-Wonder?9600XT video card. The audio output on the video card needs an audio input to connect on the sound card, but this sound card?does not appear have one.
Does anyone know how I can connect the video card to sound card so I get sound when using tv tuner? Where is the micro In line?I have it on the front panel on the external unit!!? But I would don't use this In line for this application!On my old sound card SB Li've! Platinum, I had a line at the rear PCI card (Line In & Micro Line In) and I had two others Line In on the Front Panel, It's the best, but this old card work only with Win 98 or Win 2000.... ? My new system have WinXP Pro!!!!I buy a new SB card (Audigy 2 ZS Platinum pro), but How to get sound fromo the TV tuner and what's the best setup for my micro (for MSN, Skype) ??Help will be greatly appreciated.

Anybody wants to help me ?I wait your answer for my question...!
Thanks

Sound Blaster Audigy 2 ZS Platinum Pro Ad_link Cable

Hi,? I have the Sound Blaster Audigy 2 ZS Platinum Pro and my Ad_Link cable has been damaged. I have contacted every on line auction house and everyone in and out of the United States and no one has this cable available. What I am looking for now is one of 2 things;? the specs of this cable (which is not listed in any of the documentation that came with the product, nor is it on the web-site, nor does Customer Support seem to have this information), or a comparable cable that will work in it's place.
Thanks for any help that anyone can offer.
A very frustrated,
Jody

Hi Joko,
Please check your private message.

Audigy 4 platinum pro Microphone im

Similar Messages

Maybe you are looking for