Audigy 4 pro digital connection but no l

Hi
I have a soundblaster audigy 4 pro and i connect it to my amblifier denon with optical cable but when i play a dolby digital or dts sound i can't get the logo on the amblifier. I test it on clean install win xp sp2. The sound seems to bo ok but no logo. I use Power dvd latest version.When i play the same dvd on my desktop dvd player with optical connection everything is ok sound and all logo's display.
Do i have to enable cmss?
Please help.
Thank you
P.S sorry for my bad english.Message Edited by ASTRAPI on 06-2-2005 0:30 AM

CMSS is an effect used for stereo sounds, to emulate surround sound for them. It has no effect on the DVDs you're playing as you're just outputting the AC3 signal so the speakers can decode it.
If you're using a digital connection, then CMSS will not have any effect for other sound either, you need to connect through multiple analog connections to get that sound. A standard digital connection (coaxial and optical SPDIF) can only pass over either a stereo PCM signal, or an encoded AC3 stream (like on your DVDs). Normal sound like music or games will only be passed over as stereo PCM, so there is no CMSS effect there.
If you can connect your amplifier through several analog connections, then you can use CMSS aswell, otherwise your amplifier might have it's own upmix option like ProLogic.
Cat

Similar Messages

MacBook Pro wifi connected but won't load Internet

I've connected my MacBook Pro to my local wifi connection and it tells me that it is connected, but I can't run anything on it that needs an Internet connection (eg. Google Chrome, Skype etc.)
I've ran the 'Assist Me' checks in the Network Preferences and results have found the wifi connection to be positive..
I am so confused by this!! Somebody please help?!

First contact your ISP. You need to confirm that the issue is not on their end.
Change your router channel. Sometimes this is all you will have to do.
Power cycling the router. Read the router's user manual or contact their tech support for instructions.
System Preferences/Internet & Network/Network
Unlock the padlock
Locations: Automatic
Highlight Airport
Click the Assist Me button
In the popup window click the Diagnostic button.
System Preferences/Network- Unlock padlock. Highlight Airport. Network Name-select your name. Click on the Advanced button. Airport/Preferred Networks-delete all that is not your network.
Place a check mark next to "Remember networks this computer has joined." Click the OK button and lock the padlock. Restart your computer.
http://support.apple.com/kb/TS1920 Mac OS: How to release and renew a DHCP lease
No internet connection (wireless)
Check to see if an extra entry is present in the DNS Tab for your wireless connection (System Preferences/Network/Airport/Advanced/DNS).
Delete all extra entries that you find.
Place a check mark next to "Remember networks this computer has joined."
Other resources to check into:
Configuring 802.1X in Mac OS X Lion and Later
Non-responsive DNS server or invalid DNS configuration can cause long delay before webpages load
Netspot
How to diagnose and resolve Wi-Fi slow-downs
Pv6 troubleshooting
OS X Mountain Lion: Check the status of your network connections
OS X Mountain Lion: Requirements for wireless Internet access
What Affects Wireless Internet?
Solutions for connecting to the Internet, setting up a small network, and troubleshooting
If using one of Apple's Airport routers, read its user manual or post in its forum area. If using a 3rd party router, read its user manual, contact their tech support department/website or post in its forum area. Another possible solution - read mammothsuziq response https://discussions.apple.com/message/22082360#22082360

Connecting sb2 audigy zs (not platinum or pro) digital output to logitech z-5500 speak

anyone ever try to use the digital out port on the sound card to connect to a set of speakers that had a coxial input? i have a theory on buying a digital cable and go to radio shack and buy a mono plug.. but will that work? is that compatible?
thanks

i currently have the 5 year old FPS 2000 cambridge soundworks digital speakers. i currently use the digital out on my augidy 2 zs, with the digital in adapter to connect to the speakers. (http://us.creative.com/products/prod...0&product=0375)
i am planning on purchasing the logitech z-5500 and have been reading on these boards that i can get the (http://www.radioshack.com/product.as...5Fid=42%2D2444) digital out minijack to digital out rca jack that the logitech speakers accept.
you wrote about the limitations of using this digital connection - would the limitations be exactly the same that i currently have (using the digital out to the fps 2000) or would this be a more limiting configuration?

Digital Connection with Audigy 4 and DTS5

Hallo Everybody
I have the same Problem with the nice man in this post. (Felix2)
http://forums.creative.com/creativelabs/board/message?board.id=soundblaster&message.id=46632&vie w=by_date_ascending&page=
Exactly same problems! I emaild the Support and they replied me just trash.
So my base problem and thats in the linked thread above is to get a standard audigy 4 not a pro! optical connected to the dts 5500 er Station.
Please do not tell something of 5channel sound and ac3 and ac3 and ac3 its useless.
Please do not ask me about my system config, all works fine, the audigy4 works fine, my dts works fine and the speaker too. (Ive testet it with the 3 pole minijack connecters of my audigy 4).
So all works, but the opticalDigital connection not. (And i dont want to get 5. sound, i just want to get some sound, at the moment no sound comes out)
se give a statement why optical/digital connections not work on your products.
-Please give a statement why this is that difficult/confused to connect.
And a big bravo to Felix2. I wouldn't stay that cool like you if I get some horrible and wrong answers, especially of a "professional". Maybe you have a solution do get the DTS 5500 and audigy 4 get optical connected?
Greetings
Lex

Lex,
The information I gave Felix2 is not "horrible" or wrong, they are the truth. There is no need to start attacking again, if you are not clear on the information I gave in his thread, ask for more clarification, but do not attack.
If you are having problems getting it set up, it's best to provide some detail on what settings you have changed, how everything is configured, and someone will probably be able to help you.
The start of your post isn't very clear, do you have a standard Audigy 4 or an Audigy 4 Pro? The Audigy 4 Pro does have an optical output on the external dri'vebay, the standard Audigy 4 (just a card) does not have an optical output. You would need to connect through a coaxial input (minijack to RCA, then RCA-RCA).
Cat

Audigy 4 Pro digital input 16 - 24

I have a Sony MDS-JB920 minidisc deck hooked up to my Audigy 4 Pro through the external box. Works fine.
However, the Minidisc deck allows one to set both the digital input and output to either 6, 20 or 24 bit. As the Audigy 4 Pro is 24 bit, I've set the deck to 24 bit for both in and out. So far no problems. If I watch the settings panel whilst playing a minidisc however, it indicates that the signal coming from the MD deck is 6 bit, although the deck is set to supply 24 bit through the SPDIF out.
When I put the MD deck on rec mode whilst the PC is supplying audio feed, the MD deck loops it back to the SPDIF input of the Audigy and then the software does display 24 bit signal coming from the MD deck.
This is very confusing to me, does anyone have an explanation?

CMSS is an effect used for stereo sounds, to emulate surround sound for them. It has no effect on the DVDs you're playing as you're just outputting the AC3 signal so the speakers can decode it.
If you're using a digital connection, then CMSS will not have any effect for other sound either, you need to connect through multiple analog connections to get that sound. A standard digital connection (coaxial and optical SPDIF) can only pass over either a stereo PCM signal, or an encoded AC3 stream (like on your DVDs). Normal sound like music or games will only be passed over as stereo PCM, so there is no CMSS effect there.
If you can connect your amplifier through several analog connections, then you can use CMSS aswell, otherwise your amplifier might have it's own upmix option like ProLogic.
Cat

4-pole Minijack-toRCA? (Digitally connect Audigy 2 SZ to Inspire 5500 speakerset)

Hello forum/Creative,
After searching and searching, I'm just confused. And I'm quite an audiophile and I know quite a lot about cable and connections. I still have a problem getting (Dolby) Digital from my Audigy 2 SZ card, to my Creative 5500 (Digital) speakerset. There's a couple "paradoxes" if you will so I hope someone (of Creative) can explain this to me.Because my situation is different than everything I read before.Now the "problem" is that the 5500 digital speakerset uses an external Dolby Digital decoder that is connected to the subwoofer by a DIN-to-DIN cable. Then there are the 3 minijacks (output) that connect from the decoder to the sub. (This also enable volume control per channel via the external decoder/remote) Then there's a coaxial (digital) input that goes from the decoder to any digital out source, which at first was at the coaxial out of my DVD player, which gave the Dolby Digital 5. channel sound as it should. No problem so far.But then I bought an Audigy 2 SZ card for my pc and the problems is that the Digital Out of this card is not a coaxial one, but a minijack output.Strangly however, the 5500 speakerset includes a minijack-to-rca cable, so I can connect the coaxial input on the decoder to the minijack digital out of the Audigy 2 SZ card. Then I got just front L/R channels. I realized the included cable was a 2-pole minijack, with one ground connection and audiostream (Front L/R) What I need is a 4-pole Minijack-to-RCA (. ground 2. Front L/R 3. Rear L/R 4. Sub/Center) , but I dumbfounded so far and I wonder if this cable even exists. After looking in the manuel again and checking the Creative forum and other audiofora, all I can see is a 4-pole minijack-to-DIN (digital din)Here'smy problem with that:st of all my external decoder is connected to the subwoofer via a DIN-to-DIN cable. So if I would get that 4pole Minijack-to-RCA my external decoder becomes nothing more then a nice piece of decoration. Since power from the sub goes to this decoder via the DIN cable (do I wonder if it's a Digital DIN at all)But since this decoder is also used to control volume (per channel) and has the infrared remote receiver + Dynamic Mode setting which can only be set via the remote, I would loose all these functions?I know the Audigy 2 SZ has it's own Dolby Digital (EX), DTS (ES) etc, but I don't want the soundcard output alone and not use the external decoder (again, since this decoder does more than just decode alone).Now a 4-pole Minijack-to-RCA would solve all these problems and I REALLY hope these exists. (Should be possible at least).Currently I have unplugged the 3 minijacks-to-minijacks from the external decoder and plugged them into my Audigy 2 SZ card for Analog Surround. But it doesn't sound good (well at least compared to real Dolby Digital) and via this setup I lost volume control (per channel) functionallity of the external decoder.So please help me out on this. I would really appreciate it.Regards,Felix.

P.S. The 4pole Minijack-to-RCA I mention is a female RCA connector to accept the male-to-male coaxial RCA cable. I also noticed the Audigy 2SZ Quick start manual states to hook up 5. digital speakers to use a 4pole minijack-to-4pole minijack, but this is impossible since there is only a coaxial input and minijack output.So a minijack-to-minijack cable is completely wrong. After (again) checking my Inspire 5500 user's guide, I noticed ONLY THIS manual has the ONLY correct solution to hook up the set. The aformentioned 4pole minijack-to-RCA (female).Creative, why do you supply a useless 2-pole minijack-to-RCA for the digital connection of the Inspire Dolby Digital 5500 speakerset instead of the 4pole one?I mean, you buy the Dolby Digital set to get real Dolby Digital sound, but to get that from your own Audigy (2 SZ) card, you need another cable!! (and when you get it, the other cable will never be used for anything else, since it can only transfer the Front L/R signal!!
Message Edited by Felix2 on 0-09-2006 05:43 PM

Is Audigy 2 ZS Gamer compatible with Optical Digital I/O Card II? HomeTheater Digital connecti

Hi,
I want to buy the Platinum Dri've for my Audigy 2 ZS Gamer but there isn't in the creative shop web site. I saw the Optical Digital I/O Card II and I want to know if is compatible with my sound card.
I want to connect the sound card to my HomeTheater (SONY) via optical or coaxial (digital).
If there is another way please let me know.
SincerelyVAMaresBoy

VAMaresBoy
Are you referring to this card?
http://us.creative.com/products/product.asp?category=3&subcategory=55&product=30
As what is shown on the webpage, it only support those mention sound card and is not meant for Audigy 2 ZS.
You can get a minijack to coaxial cable and connect from the sound card through the digital out jack to the coaxial input on your speaker system.
Jason

Macbook pro wont connect to internet using cable, but connects using wifi fine

My macbook pro wont connect to the internet using a cable, but connects using wifi fine. I use wifi at home but sometimes need to use my laptop at work and connect using a cable but it says i'm not connected to the internet?

Can you open a terminal and invoke the following commands:
ping -c 10 localhost
and
ping -c 10 google.com
You should normally get something like:
PING google.com (74.125.224.103): 56 data bytes
64 bytes from 74.125.224.103: icmp_seq=0 ttl=55 time=19.053 ms
64 bytes from 74.125.224.103: icmp_seq=1 ttl=55 time=37.692 ms
64 bytes from 74.125.224.103: icmp_seq=2 ttl=55 time=46.988 ms
64 bytes from 74.125.224.103: icmp_seq=3 ttl=55 time=33.466 ms
64 bytes from 74.125.224.103: icmp_seq=4 ttl=55 time=28.940 ms
64 bytes from 74.125.224.103: icmp_seq=5 ttl=55 time=58.070 ms
64 bytes from 74.125.224.103: icmp_seq=6 ttl=55 time=33.335 ms
64 bytes from 74.125.224.103: icmp_seq=7 ttl=55 time=33.361 ms
64 bytes from 74.125.224.103: icmp_seq=8 ttl=55 time=36.099 ms
64 bytes from 74.125.224.103: icmp_seq=9 ttl=55 time=41.111 ms
--- google.com ping statistics ---
10 packets transmitted, 10 packets received, 0.0% packet loss
round-trip min/avg/max/stddev = 19.053/36.811/58.070/9.939 ms

Macbook Pro 10.7.5 internet will not work. HELP!!! Ethernet and WIFI both say connected but still no internet.

I have a macbok pro running 10.7.5. My internet has always worked on it but I decided to try changing my router set up - the set up didn't work so I reverted back to the original setup that had previously worked.
Now, I have an Imac running tiger - I can connect to the internet via WIFI or Built In Ethernet with no problem.
When I try to connect to the internet on the Macbook Pro running osx 10.7.5 my internet will not work
Safari Says (You are not connected to the internet) and Google Chrome says (Page is Unavailbe) and lists some trouble shooting options that I tried.
When I go to System prefrences > Network my WIFI and Ethernet both say "Connected" and have a green light next to them.
I have tryed deleting the connections and starting new ones and I have even tried deleting the Location and starting a new one.
Nothing works - no matter what I do, even know the WIFI or ETHERNET says Connected, the internet will not work on the Macbook Pro.
The Internet works fine on my Imac and I have tried everything such as swaping cables but there doesn't seem to be a problem with my internet
or with my router - it all works fine with my Imac running Tiger.
Can anyone help me get my internet working on my Macbook Pro again? Any ideas?

Hello ASGR.SYS amd WahWar,
I tried both of your suggestions and neither of them worked.
ASGR SYS - When I tried it your way i got a message saying that the that the diagnostic couldn't repair the problem. It shows the thw WIFI, WIFI SETTINGS, NETWORK SETTINGS, ISP, all turn green. But the Internet and Sever stay red. The thing is, there is nothing wrong with my internet connection as I can connect to the internet on my Imac running tiger, both through ethernet and wireless. When I go to System Prefrences and Ntwork the WIFI and ETHERNET both say "Connected" even know I can't veiw any websites.suggestion
When I tried WAHWAR's suggestion I get a message that says cannot connect to the WIFI network and then it lists your typical trouble shooting tips. Like Make sure you entered the right password and make sure you are in range of the wireless network
Again, just to confoirm - My internet connection is working fne both the WIFI and the Ethernet. When I use it on my IMAC running tiger, everything connects as it should and it works perfectly. But when I try to connect with the MacBook Pro, Even know the connections in the Network settings window show up as "connected" the MacBook still seems to think that my internet connection isn't working at all.
I have tried creating new connections, creating new locations, and I have even gone as far to reset my router and start completely from scratch. The result so far has been the same - the IMAC running tiger will connect - my blackberry and iphone will connect - but the macbook pro running lion will not connect..
I'd apprechiate any other suggestions

My IPOD and Macbook Pro both will not connect to the Itunes store through Itunes says no internet connection, but I can connect through safari and I have a internet connection

My IPOD and Macbook Pro both will not connect to the Itunes store through Itunes says no internet connection, but I can connect through safari and I have a internet connection

As I mentioned above, I am not very tech savvy so I have no idea why a wireless protocol would be showing up there, I'm just listing everything I see in hopes that someone might know something I can try. This is why I am asking for help here - I'm not sure what has happened that has made me unable to connect, especially since it seemingly occured while nobody was using the computer.
I guess I should clarify that I'm not a total hillbilly- normally my firewall is set to 'on', but I set it to 'off' to try and troubleshoot the issues here as I was told that sometimes it can interfere with the computer's ability to connect to the internet. If this is not the case and firewall does not affect anything, I will turn it back on while I try to fix this.
I have tried the method you mentioned above a few times - I actually contacted my ISP earlier this week and they recommended resetting the router like that. They didn't mention any known network issues.

My macbook pro is connected to wifi but it will not connect to the internet.

My macbook pro is connected to wifi but it will not connect to the internet. When I go on safari, it says that "Safari can't verify the identity of the website". Then I tried to update flashplayer but you need the internet to update it. All this only started happening after that Moutain Lion software was downloaded onto the laptop. Please help, I have been internet-less for a couple months now.

Hi rynhelp,
If you are not able to connect to the internet after installing Mountain Lion, see this article for information on how to start troubleshooting:
OS X Mountain Lion: Use Network Diagnostics
http://support.apple.com/kb/PH10984
You may find additional troubleshooting information in this article useful:
Troubleshooting Wi-Fi issues in OS X Lion and Mac OS X v10.6
http://support.apple.com/kb/HT4628
It is written for Lion but works for Mountain Lion as well.
Cheers,
- Ari

I installed adobe digital editions but when I want to authorize a device (an e-reader) it doesn't work, I receive an error message that digital editions cannot connect with the activation server. what can I do?

I installed adobe digital editions but when I want to authorize a device (an e-reader) it doesn't work, I receive an error message that digital editions cannot connect with the activation server. what can I do?

Please quote the exact error message, word-for-word, verbatim.
What is your operating system?
What version of Lightroom?

My macbook pro is connected to internet via my time capsule but my iPad and iPhone won't. it shows wifi connection to the time capsule but when i go on to the internet on the iPad or iPhone, it comes up with network error. can anyone help?

my macbook pro is connected to internet via my time capsule but my iPad and iPhone won't. it shows wifi connection to the time capsule but when i go on to the internet on the iPad or iPhone, it comes up with network error. can anyone help?

This can be caused by a number of issues.
Was everything working and then suddenly stopped??
Or is this a new clean setup and has never worked.
Do you have a cable modem which is not a router and the TC setup in bridge? That will cause it. The TC must be in router mode, ie dhcp and nat.
Check the IP the MBP gets including dns and gateway..
Then check the ipad/iphone.. post what IP dns and gateway (router in applespeak) they get.

Cisco vpn 5.0.07.0440-k9 connected but not access remote network from Windows 8.1 pro

I am using Cisco vpn 5.0.07.0440-k9 and Cisco vpn 5.0.07.0290-k9 both version on our windows 8.1 pro laptop.
VPN successfully connected but not access remote network and not getting ping.
But when i am try through wifi then vpn good work.
Please help me as soon as possible.
Thanks
Sanjib

Hello Karthik,
I am using "MTS usb wifi" device and connect vpn through wifi Its working good the same win8.1 pro. But when i am try to connect VPN through LAN/Wired or USB modem (Like: Vodafone,MTS and others) its not working.
I am using Easy vpn on Cisco RV325 router in our office. Same VPN client is very good working in Windows 7 SP1 and Windows XP SP3.
Thanks
Sanjib

Cannot get Mac Book Pro to connect to ebay. Other computers in the house on the same network connect, but this mac book pro won't. It goes to any other web site, just won't connect to ebay

I cannot get this macbook pro to connect to ebay. Other apple computers in my house on same network will but this one will not. This one will connect to any other site, but not ebay. Thoiguhts?

Try using OpenDNS servers:
System Preferences>Network>Advanced>DNS.
Click on the + in the left side column and add the following:
208.67.222.222
208.67.220.220
Click OK, then click Apply
BTW one post is sufficient. Two clogs the servers.

Audigy 4 pro digital connection but no l

Similar Messages

Maybe you are looking for