Audigy 4 Pro ERROR pls h

hi, i just got my audigy 4 pro today, from newegg.com and unintalled my audigy 2 completely... im a tech... well.. after that powered down, and installed the audigy 4 pro completely by the instructions, when i turned it on, i installed it just like the instructions, and software,., booommmm !!! sound... awesome, ok restart... restart.. sound boommm works.. ok now i wanted to adjust my audio... beep error... something about the software could not support the current card... ok so i moved my mouse to the top of the screen with that hotbar.. and clicked everything.. beep same message.. so the software that came with the soundblaster is not even working for my card... hmm im using winxp pro on an amd 64 3000+ with 2 g's ddr400mhz , with .2 terrabytes of hdd space, with a nvidia geforce 6800gt.. and a k8n-e deluxe asus motherboard... pls help.. im reinstalling my entire OS to get this thing to work...

u know what.. i think that is what happened... but i redid the pc again, and very slowly reinstalled everything... grr but the sound blaster audigy 4 pro does work now... i did notice something very small that was annoying... sometimes when i empty the recycling ben.. it makes a static noise, midway thru the sound file... but other than that.. the card is awesome, and i don't have any feedback (high pitched noise, like noise) on my speakers.. but now i need new speakers.. so im going to best buy tomarrow to buy those THX speakers for like 200.00 are those better than the ones recommended on the back of the box..
on box is
Creative Inspire T7900
Creative Inspire P5800
best buy thx speakers
THX certified speakers 5. 650 watts i think
http://hardware.gamespot.com/Klipsch-ProMedia-5.-5025-O-6-26
looked like these...
please help.. and dont point me to creatives just for a purchase, pls point me to an honest opinion.. Point me to sound.. cuz im a sound freak thankz for helping again

Similar Messages

Audigy 4 Pro - I/O Hub does not get any po

Hello all,
I purchased an Audigy 4 Pro a few days ago and I cannot get the external hub to power on.
This somewhat sumarizes what I tried so far:
. Uninstalled all drivers and software of my old Soundblaster Li've 5. Platinum
2. Also removed all entries of the old soundcard from Device Manager
3. Powered down the PC fully, took out the Li've 5. and powered it back on and logged on to my Windows XP (SP2).
4. Just to be sure before installing the drivers for the Audigy 4 Pro I cleaned out the cookies, temporary internet files, all other Temp folders, the Prefetch folder and also ran a program to clean the registry.
5. De-activated my Norton AntiVirus Corporate Edition's Real-time protection, it's services and also my ZoneAlarm Pro from starting up the next time I reboot Windows.
6. Powered down the PC again, took the power cable out, made sure there was no power whatsoever left and carefull inserted the Audigy 4 Pro card in an empty PCI slot.
7. Connected the larger AD_Link to the card, then to the hub
8. Connected the smaller AD_Link to the card, then to the hub
9. Finally connected the power convertor cable to a free systems power unit
0. Double-checked the entire hardware setup a few times and power the PC back on
. Windows XP detected and installed the OHCI Compliant IEEE 394 Host Controller and the 394 Net Adapter
2. Canceled to proceed looking for a driver when it found the Audigy 4 Pro card
3. Installed the drivers and applications that came with the Audigy 4 Pro. Everything went smooth - no error messages during the installation.
4. Rebooted PC after prompting to do so.
5. With ZoneAlarm and my Norton Antivirus de-activated, all drivers and programs installed properly the external I/O hub does NOT get any power. I also made sure to check this with the remote control.
I have ofcourse no sound coming out that hub when plugging in my headphone and also cannot use my microphone.
6. I ran the Diagnostics program that was installed automatically with the other Creative applications: It claims there aren't any problems.
7. Powered down the PC again, checked all connectors, powered the PC up again: Same problem... no power.
8. Installed the latest 4-in- drivers found on viaarena.com: Same problem
9. Uninstalled and reinstalled the drivers and applications: Same problem
20. Uninstalled and reinstalled the drivers and applications after taking out all other PCI cards and placing the Audigy 4 Pro card into an other PCI slot: Same problem
2. Set my BIOS to factory defaults: Same problem
22. Formatted the PC and reinstalled Windows XP (SP) with every update thinkable... Same problem
23. Formatted the PC AGAIN ( ! ) and reinstalled Windows (SP2) with updates .... Same problem
Another problem: Sent a detailed e-mail to Creative Support Europe.... Still NO respons after 48+ hours.
Anyone else should have a solution I would appreciate trying out, or if all fails I'll go for a Terratec model.
Thanks in advance!
PC Stats: Asus A7V266 - VIA KT266 Chipset (VT8366 North Bridge with VT8233 South Bridge) / BIOS version: 0 / AMD Athlon .4GHz / 52Mb
Message Edited by HilTek on 07-05-2005 :04 PM

Amazing, I got mine about 3 days ago and have been pulling my hair out trying to resolve the same problem. I have checked power connections, reinstalled drivers. I think something is wrong with the box. I tried to call support yesterday, which was a Saturday, but they aren't available til Monday. I guess I will call them Monday. Let me know if you find anything out in the mean time.
Thanks
John
AMD Athlon(tm) 64 FX-57 Processor
A8N-SLI Premium
NVIDIA GeForce 7800 GTX
GB RAM
WIN Pro x64

Audigy 4 Pro on vista!

So I only recently decided it was about time to fit my Audigy 4 Pro into my pc when I got my new case. I've had the card something like 3 years or so now. But since installing it I've had some troubles on it with Vista. I had installed on my new pc once previously with Vista and the software bundled with it worked fine that time, but alas the case was too small for the audigy and my new Gfx card to fit so I removed it until I got my new case a few weeks ago. Upon fitting it this time when I installed the software it wouldn't work, it gave me errors and could not find the card. It would close down all the applications... so I go and get the vista drivers and I don't have any of the cool apps that came with it on XP. My question is can I get these apps to work on vista so I can get my THX and Dolby panels back

Anyone?

Audigy 4 Pro - Line In 3 Prob

I have been having a huge issue with getting my Line In 3 to play audio from my Television and/or my DVD player. I sent my first Audigy 4 Pro back because I could not get the Line In 3 to work. Now I am having the same problem on a completely different sound card. My DVD player's audio out work just fine when they are hooked into the TVs in, but when I hook the DVD outs to the external hub's Line In 3 nothing comes out of my computer speakers. I am so frustrated with this sound card. Any help would be grateful.

- are all other features working well in Ext. Hub (powerful enough PSU or is the additional power for the A4 PCI card taken from shared floppy power cable))?
I've only ever used the Line-In and the Headphone jack on the front, they work fine. There is a red light coming out of the Optical out on the front (expected). The card does have a 4 pin connection and it is plugged in.
- have you tried w/o other peripherals connected into Hub (just one through line-in 3)?
Yes, same results (but ... see below).
- have you installed latest drivers/software updates for your card?
Where can I find the latest drivers at? I hate to download and install the wrong ones.
- have you tried by uninstalling the CT software suite (least Surround Mixer) and control I/Os through Windows Play/Recording Controls (start run... mmsys32 and mmsys32 /r)
I have not tried to uninstall anything and I type mmsys32 in the command prompt and get an error that it can not find the program.
Update: I turned my computer off last night and turned it back on this morning, plug my RCA cables into my external hub and get a steady low frequency "buzz".

Audigy 4 Pro - No Midi in Audio Mixd

I have an Audigy 4 Pro, which came with Cubase LE.
In my recordings, I have midi tracks which have to be turned to Audio before the tracks can be added to the Audio mixdown. Cubase only makes one reference to this in the help files which says you must connect the output to the input on the sound card - which I suppose means that I would have to use a Y cable to route back to my mixer unless I wanted to unhook some of my speakers? Sounds like a hassle.
Or is there some way to do this in software with Audio HQ? Use "What you hear setting" perhaps?
I've looked at length through the help files and can't find any direct reference to this.
It's a bit frustrating. Right now what I'm doing is saving the midi tracks, and then using ITUNES to convert them to Audio files, which is also a hassle.
Anybody else run into this?
Any suggestions appreciated - VelvetElvis

Well I just got an email back from Creative Support and they reccomend I use Windows Media PLayer (or any other of the programs that do work) instead if it works 00%. I seriously hope they update the Entertainment Centre to actually work, I feel I am losing value of my Pro product very quickly as the remote now only has the function of changing the volume, not very satisfactory.
I also feel it's rather ridiculous that they recommend I use another program than Creative's, it's a bit of a cop out, and they should really work on fixing the program soon.
If the remote control could control Windows Media Player 0 when WMP0 is in fullscreen then that would be great, or if the remote control could be changed to be like a media keyboard in that it controls any media application rather than just controls that are visible it would be fantastic. Also if the power button could be altered to start an application then that would be great.
Anyway creative, update the entertainment centre to fix this issue please!Message Edited by CrimsonCleaver on 04-03-20062:6 PM

Audigy 4 Pro Optical In Probl

Hey everyone,
I've had an Audigy 4 Pro for about a year now and it's an amazing piece of hardware, but I seem to be having some kind of problem.
I recently had an HD cable box put in my room and I want to connect the optical out port on the cable box to the optical in port on the Audigy 4 I/O box. I made the connections and the optical cable is lit and sending a signal, but I'm not getting any sound out of my speakers. I went into the volume mixer and turned on "S/PDIF-In"?and still nothing. Are there any other settings I need to check? I checked some of the other inputs on the I/O box and they seem to work so I don't understand why this one won't. Thanks in advance for any help you can give me.

What seems to be a problem is the I/O box is powered on, but not connecting to the card. The power light is on, but the volume knob isn't doing anything and the extra inputs aren't recognized. I didn't touch any of the cables, and they're all secure so I have no idea what's going on.

Audigy 4 Pro microphone problems in Win 7 64-bit

Hi there,
Since I put my Audigy 4 Pro card into my newer PC with Win 7 64-bit the microphone only seems to work when it wants to, or works but sounds messed up.
I've waited a while before posting about this because I thought the newer drivers would sort out the problem, but it remains the same.
The card/microphone works without a problem if I put it in a PC with Win XP.
Sometimes the microphone will not pick up any sound at all. Other times it will work, but only for? game, say Heroes of Newerth. Then in Windows using teamspeak, people describe the sound like I'm talking through a fan. Tried using the in-game VOIP but I get the same result.
After a restart or just some random day, people in Heroes of Newerth would discribe the VOIP from my side as if I was talking under water(or through a fan), but then it would work fine for teamspeak or Bad Company 2 or any other game. I used these 2 games as an example since its what I'm playing mostly at the moment.
There doesnt seem to be any consistancy with the problem.
I have recently removed the sound card from my PC and now forced to use the onboard sound that reminds me of the sound of a clockradio.
My PC specs are:
Asus Rampage Formula Motherboard
Intel Core 2 Duo 3.0GHz E8400
8GB RAM
4 x WD Raptor HDD Stripe RAID
ATi Radeon 4870 52MB
Sound Blaster Audigy 4 Pro?(model number shown?is SB0290)
Using?a Sennheiser PC350 Headset.
What I have tried my side so far:
Tried latest and older drivers for Win 7 64-bit
Reinstalled Windows 7 several times with different drivers.
Tried disabling all devices except for line/mic
Tried other input devices.
Tried with different audio and sound codecs, tried without any.
Might have been or 2 other things I tried I cannot think of now.
Is there anyone that experienced similar problems and got it fixed? Any help would be appreciated.

Hi Bill,
Can you be more specific about which steps were not recorded?
There some things that will not be recorded. The release notes list some known issues.
Known Issues:
Tutorial Builder can only capture actions in Photoshop that are recorded by the ScriptListener plug-in. While this includes most of Photoshop's functionality, some features/tools are not recorded. In particular, brushing actions are not captured. We hope to address this in future releases of Tutorial Builder.
Some of the the actions that Tutorial Builder captures are not yet instrumented to produce detailed text instructions in the final tutorial. For such actions, the generated tutorial will include a step that says "The (action name) is not yet supported by Tutorial Builder," and the tutorial author will have to edit the HTML to provide more descriptive text. Note that the "Show me in Photoshop" link is still generated for such actions.
Some Photoshop actions allow the user to specify a set of parameters in multiple ways, but Tutorial Builder cannot detect how the user specified those settings during the recorded demonstration. Thus, the text in the generated tutorial may not describe exactly what was demonstrated. For example, in the Image > Adjustments > Levels tool dialog box, you can update the parameters using three different eye droppers. Since Tutorial Builder does not know which (if any) of these eye droppers were used, the text for a Levels adjustment does not describe exactly how the settings are specified. Again, the tutorial author can simply edit the HTML to provide a more accurate description.
Thanks!
Mira

Audigy 4 pro digital connection but no l

Hi
I have a soundblaster audigy 4 pro and i connect it to my amblifier denon with optical cable but when i play a dolby digital or dts sound i can't get the logo on the amblifier. I test it on clean install win xp sp2. The sound seems to bo ok but no logo. I use Power dvd latest version.When i play the same dvd on my desktop dvd player with optical connection everything is ok sound and all logo's display.
Do i have to enable cmss?
Please help.
Thank you
P.S sorry for my bad english.Message Edited by ASTRAPI on 06-2-2005 0:30 AM

CMSS is an effect used for stereo sounds, to emulate surround sound for them. It has no effect on the DVDs you're playing as you're just outputting the AC3 signal so the speakers can decode it.
If you're using a digital connection, then CMSS will not have any effect for other sound either, you need to connect through multiple analog connections to get that sound. A standard digital connection (coaxial and optical SPDIF) can only pass over either a stereo PCM signal, or an encoded AC3 stream (like on your DVDs). Normal sound like music or games will only be passed over as stereo PCM, so there is no CMSS effect there.
If you can connect your amplifier through several analog connections, then you can use CMSS aswell, otherwise your amplifier might have it's own upmix option like ProLogic.
Cat

Audigy 4 Pro "beeping, cracking" where is créativelabs label quality

I just installed my new audigy 4 pro with the Gigaworks s750.
Well, all is fine with the sound quality but when i solicite more the system hard dri've, there is some loud bad noise that appaird.
i contacted the heldesk, they told me to r?install my windows!
I'm not really happy front of this lake of quality from cr?ati've.
I used a AC97 chipset onboard before and no disturbing noise appaird during transfering files or open heavy applications.
I seen in the forum that many X FI chipset present the same problem when playing games.
The help desk ask me too to change the pci slot or install the audigy in another
computer !!! thru!!
I responded that is not my job to make the card working but , yes i can give some feedback to them.
I think that creativelabs are front of a situation now that they slowly loose they good reputation with they new products that are not really stable and ready for the sale.
But many companys use this system to put a product on the market.
The first buyers pay the reshearch to finish the conception of the final product.
where i don't agree is to pay so much amount of money for a product that they said is working (4 pro) but is still in prototyp or beta testing !!
I will r?install my windows (it will be more fresh..) but i'm practecely sure that it will not fix this problem (like i read in http://forums.creative.com/creativelabs/board/message?board.id=soundblaster&message.id=3426
Hope that the drivers will fix this, and note a hardware problem (irq or latency from the card himself)
hanny comments will be welcome...

My daughter has had her Razr for about 9 months now. About two weeks ago she picked up her phone in the morning on her way to school when she noticed two cracks, both starting at the camera lens. One goes completely to the bottom and the other goes sharply to the side. She has never dropped it and me and my husband went over it with a fine tooth comb. We looked under a magnifying glass and could no find any reason for the glass to crack. Not one ding, scratch or bang. Our daughter really takes good care of her stuff, but we still wanted to make sure before we sent it in for repairs. Well we did and we got a reply from Motorola with a picture of the cracks saying this was customer abuse and that it is not covered under warranty. Even though they did not find any physical damage to back it up. Well I e-mailed them back and told them I did a little research and found pages of people having the same problems. Well I did not hear from them until I received a notice from Fed Ex that they were sending the phone back. NOT FIXED!!! I went to look up why and guess what there is no case open any more for the phone. It has been wiped clean. I put in the RMA # it comes back not found, I put in the ID #, the SN# and all comes back not found. Yet a day earlier all the info was there. I know there is a lot more people like me and all of you, but they just don't want to be bothered so they pay to have it fix, just to have it do it again. Unless they have found the problem and only fixing it on a customer pay only set up. I am furious and will not be recommending this phone to anyone. And to think I was considering this phone for my next up grade! NOT!!!!

AUDIGY 4 PRO PROBLEM WITH I/O

NEW MEMBER Just purchased a AUDIGY 4 PRO sound card, card works GREAT, however the external I/O hub which is connected via a multiconductor cable from the sound card, appears to be
DEAD, no LED indicator light come on;, when the headset is pluged into the I/O hub, the speaker audio is
NOT mute. The instructions are not TOO clear as to how to test the I/O hub. In summary I think I have a
DEFECTIVE cable or I/O hub! Any suggestions would be appreciated. Thanks [email][email protected]][email protected][/url]
SENT 700EST27JAN06

HI DAN Yes, the card is working properly, but the external I/O hub which has various jacks and controls is not showing any signs of life. I think there is some type of LED's to indicate something, but they do NOT light. A multiconductor cable is used to connect from the rear of the sound card to the external I/O hub. I have reconnected this cable several times, so as to reduce the chance of a poor connection, but NO luck. Thanks for your suggestions, best regards **bleep**:smileyindifferent:

Audigy 4 Pro, what cable

Hello, I just purchased your Audigy 4 Pro, I have the Logitech z-5500 5. digital speakers, it has inputs for Optical,Coaxial, as well as 6 channel direct I have an RCA Digital Coaxial cord and a Monster Optical cord, please tell me what cords I need to have digital sound

Sir_Dude,
Yes, the 6 channel direct inputs are analog as far as the output on the sound card goes, but then again so is the sound that comes out of your speakers when you use a digital cable like an optical or coax. Basically you are deciding where you want the conversion from analog to digital to take place, at the sound card or at the speakers. It is most likely that the converters in the sound card are of a higher quality than those on the speakers (this is where the 3dB SNR 24-bit/92 Khz DACs come into play). If you decide that you want to use an optical or coax digital connection there are some limitations you should be aware of:
You are limiting the number of sources that you will get surround in. With a coax or optical connection you will receive surround sound in DVD's and other AC3 encoded signals. Games that use Direct Sound will output in stereo.</LI>
You are removing the ability to playback DVD-Audio disks.</LI>
You will lose CMSS ability.</LI>
If you read the articles in the FAQ at the top of the board they will explain why this is the case and why it is better to use the analog outs on the card for your primary output.
Jeremy

Audigy 4 Pro Low Recording Levels/Master Knob/OSD probl

I purchased a second-hand Audigy 4 Pro. I was not given the software disk but managed to install the latest drivers and get it to play MP3s. I use Adobe Audition to record my old tapes to MP3 and record my attempts at guitar. With my SBLi've I had no problem. I bought the Pro because of the ease of using the breakout box. However I have some quesions about some problems I am having. ) Since I have no Creative software, just Win XP Mixer I don't seem to be able to control the input levels from either the mixer or the box. I have a tape deck using RCA to Line In 3 and an electric and acoustic guitar to Line In 2. The mixer record levels seem to have no effect. I can record but nothing seems to be much more than -20db or so at most. Could this be because Adobe Audition only shows Line In 3 L (ie one channel only)? Could this be because of the much greater dynamic range of the Audigy 4 compared to the SBLi've Value? Do I need additional Creative software and if so what and how to get it please?2) The Master knob on the breakout box just spins round and round without sto
ps.
In other words you can rotate it in either direction ad infinitum. Is this correct? Pushing it in and out does cause the mute to work fine. 3) The help file talks about an On Screen Display associated with the remote. I don't have one when I use the remote, even when I press the Display button. Again, do I need Creative software for the remote? I have a yellow question mark against Multimedia Audio Control in my device list. ThanksMessage Edited by Dunkelmann on 2-23-200607:22 PM
Message Edited by Dunkelmann on 2-23-200607:43 PM
Message Edited by Dunkelmann on 2-23-200608: PM
Message Edited by Dunkelmann on 2-23-200608:5 PM

Wow these forums still suck. You have easy questions and no one bothered to help you out. I registered jsut to answer them for you although you probably already figured it all out. . It seems that loudness is optomized by creatives own drivers. What you described was also true back when you could use the e-mu driver hacks before creative bought e-mu. 2. The master knob indeed spins for infinity, obviously with no effect once you get to either end. This sucks becasue i have OCD and constanly spin this thing all kinds of ways. THey should have used the same system as the line-/mic knob. Only God and the engineer will ever know why they did this. 3 Yes. The on screen display is pat of the creative media player app.
So to solve all your problems, you can get the full software package from creative.com under the support menu. Just follow the menu options for your device. The software requires that you have the hardware which you do so the software is free. One more problem you WILL have. The software doesnt install under XP. You have to enter windows safe mode and install it from there otherwise the whole thing freezes up during the start of the install process. Fun times!

Audigy 4 Pro - Remote Contr

Hey,?I've got an Audigy 4 Pro card which i've had from new since 2005.However, i've only ever had the remote control working once, around about the time i first installed the card. Since then it's not worked. I'm currently running the latest drivers and mediasource 5, and still not getting remote control. I've been told i need Creative Media Centre, and i need to enable the remote, but A) i dont know where to get media centre since it's not on the downloads site for the Audigy 4 Pro. and B) i've tried looking for the "remote control" tab in media source, but to absolutely no avail. Can anyone tell me how i'm supposed to get my remote control working again? please?Martin

Entertainment Center is most likely found in the installation CD (X:\Audio\EntCntr\), I don't know if the A4Pro software can be installed individually, but if?you can't, copy the whole CD to the HDD and then copy engine32.cab from X\Audio\Setup\ to the app installation dir. If you no longer have the installation CD, download the ISO from BadBoy's page. http://badboy.hub.io/?You can try RMX automation, its a free program that lets you configure the buttons in the remote: http://sourceforge.net/projects/rmx/?

Audigy 4 Pro On Screen Display Is

Hi!
I just updated my Audigy 4 pro's drivers and apps from the Creative's web site Download section...
Now ... The On Scren Display (the one that shows u the volume/mute/unmute) doesn't appear anymore!
I've tried to disable it and enable it again but still not working...
Also the SoundFont Bank works weird ...if i use my computer's keyboard it can only play 4 tones in the same time ...and also if i press a key and then another one without letting the first key go ...when i let it go (the first key) the sound STOPS and the second key works like i pressed it again ...why can't i use it like a NORMAL PIANO or MIDI KEYBOARD?
sorry for my bad English!
hope to get some help soon
Thank you!

i got same problem with on screen display after updating Creative Console Launcher
and they said there was a new mic effect called reverb, i don't see it for my part

Audigy 4 pro vs. cubase sx sample rate - fight to the de

helloI recently bought an audigy 4 pro soundcard, heard it was probably the best for home recording etc.
I have encountered some problems... I have a load of backing tracks stored in cubase sx 2.2, but now when i open them up it shows the message "sample rate could not be set. This may be due to the sample clock being set to external sync."The files now run at 48kHz instead of 44.kHz, making them jittery, out of time, or chipmonk like. I've read through various messages around similar problems, i've tried everything & nothing has worked...in cubase - project/project set up/sample rate = 48kHz and can not be changed.
in cubase - device set up/vst multitrack/asio driver = creative asio + clock source = internalit only offers 5 asio drivers, asio direct x full duplex, asio mulitmedia, creative asio, SB audigy4 asio 24/96 [a400] and SB audigy4asio [a400] i do not get the offer of asio4all.While i have also tried going through the control panel...controlpanel/audio control panel/device settings/digital out samplerate and setting it to 44.kHz this doesn't seem to change anything. I have no problem with recording new songs at a higher sample rate, but has audigy 4 pro rendered all my old songs useless?please help!!!!!!!!

Doogs wrote:
helloI recently bought an audigy 4 pro soundcard, heard it was probably the best for home recording etc. I have encountered some problems... I have a load of backing tracks stored in cubase sx 2.2, but now when i open them up it shows the message "sample rate could not be set. This may be due to the sample clock being set to external sync."The files now run at 48kHz instead of 44.kHz, making them jittery, out of time, or chipmonk like. I've read through various messages around similar problems, i've tried everything & nothing has worked...in cubase - project/project set up/sample rate = 48kHz and can not be changed.in cubase - device set up/vst multitrack/asio driver = creative asio + clock source = internalit only offers 5 asio drivers, asio direct x full duplex, asio mulitmedia, creative asio, SB audigy4 asio 24/96 [a400] and SB audigy4asio [a400] i do not get the offer of asio4all.While i have also tried going through the control panel...controlpanel/audio control panel/device settings/digital out samplerate and setting it to 44.kHz this doesn't seem to change anything. I have no problem with recording new songs at a higher sample rate, but has audigy 4 pro rendered all my old songs useless?please help!!!!!!!!
If you RTFM, you'll find out, Audigy 4 is locked into 6-bit/48kHz and 24-bit/96kHz resolutions when ASIO driver is in use.
I suppose, you still can (if not saved @ 48kHz) load your projects into SX @ 44. kHz, by selecting MME drivers instead of any ASIO.
Perhaps installing Asio4All gets it popped into that list you have there.
There are also tools to convert from 48-->44., but the source has to be as wave format.
Here is one freeware SRC tool @ http://www.voxengo.com/product/r8brain/.
.jtp

Audigy 4 Pro ERROR pls h

Similar Messages

Maybe you are looking for