Audigy 4 Pro - I/O Hub does not get any po

Hello all,
I purchased an Audigy 4 Pro a few days ago and I cannot get the external hub to power on.
This somewhat sumarizes what I tried so far:
. Uninstalled all drivers and software of my old Soundblaster Li've 5. Platinum
2. Also removed all entries of the old soundcard from Device Manager
3. Powered down the PC fully, took out the Li've 5. and powered it back on and logged on to my Windows XP (SP2).
4. Just to be sure before installing the drivers for the Audigy 4 Pro I cleaned out the cookies, temporary internet files, all other Temp folders, the Prefetch folder and also ran a program to clean the registry.
5. De-activated my Norton AntiVirus Corporate Edition's Real-time protection, it's services and also my ZoneAlarm Pro from starting up the next time I reboot Windows.
6. Powered down the PC again, took the power cable out, made sure there was no power whatsoever left and carefull inserted the Audigy 4 Pro card in an empty PCI slot.
7. Connected the larger AD_Link to the card, then to the hub
8. Connected the smaller AD_Link to the card, then to the hub
9. Finally connected the power convertor cable to a free systems power unit
0. Double-checked the entire hardware setup a few times and power the PC back on
. Windows XP detected and installed the OHCI Compliant IEEE 394 Host Controller and the 394 Net Adapter
2. Canceled to proceed looking for a driver when it found the Audigy 4 Pro card
3. Installed the drivers and applications that came with the Audigy 4 Pro. Everything went smooth - no error messages during the installation.
4. Rebooted PC after prompting to do so.
5. With ZoneAlarm and my Norton Antivirus de-activated, all drivers and programs installed properly the external I/O hub does NOT get any power. I also made sure to check this with the remote control.
I have ofcourse no sound coming out that hub when plugging in my headphone and also cannot use my microphone.
6. I ran the Diagnostics program that was installed automatically with the other Creative applications: It claims there aren't any problems.
7. Powered down the PC again, checked all connectors, powered the PC up again: Same problem... no power.
8. Installed the latest 4-in- drivers found on viaarena.com: Same problem
9. Uninstalled and reinstalled the drivers and applications: Same problem
20. Uninstalled and reinstalled the drivers and applications after taking out all other PCI cards and placing the Audigy 4 Pro card into an other PCI slot: Same problem
2. Set my BIOS to factory defaults: Same problem
22. Formatted the PC and reinstalled Windows XP (SP) with every update thinkable... Same problem
23. Formatted the PC AGAIN ( ! ) and reinstalled Windows (SP2) with updates .... Same problem
Another problem: Sent a detailed e-mail to Creative Support Europe.... Still NO respons after 48+ hours.
Anyone else should have a solution I would appreciate trying out, or if all fails I'll go for a Terratec model.
Thanks in advance!
PC Stats: Asus A7V266 - VIA KT266 Chipset (VT8366 North Bridge with VT8233 South Bridge) / BIOS version: 0 / AMD Athlon .4GHz / 52Mb
Message Edited by HilTek on 07-05-2005 :04 PM

Amazing, I got mine about 3 days ago and have been pulling my hair out trying to resolve the same problem. I have checked power connections, reinstalled drivers. I think something is wrong with the box. I tried to call support yesterday, which was a Saturday, but they aren't available til Monday. I guess I will call them Monday. Let me know if you find anything out in the mean time.
Thanks
John
AMD Athlon(tm) 64 FX-57 Processor
A8N-SLI Premium
NVIDIA GeForce 7800 GTX
GB RAM
WIN Pro x64

Similar Messages

I can no longer get to Facebook Via firefox It comes up loading in the tab but does not get any further one minute it was working the next it was,nt should I try uninstalling firefox then reinstall or does anyone know what could of happened thanks

# Question
I can no longer get to Facebook Via firefox It comes up loading in the tab but does not get any further one minute it was working the next it was,nt should I try uninstalling firefox then reinstall or does anyone know what could of happened thanks

* "Clear the Cache": Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
* "Remove the Cookies" from sites that cause problems: Tools > Options > Privacy > Cookies: "Show Cookies"
Start Firefox in [[Safe Mode]] to check if one of your add-ons is causing your problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
* Don't make any changes on the Safe mode start window.
See [[Troubleshooting extensions and themes]] and [[Troubleshooting plugins]]

My MacBook Pro pwers up but does not get past the the Apple logo.

I have a MacBook Pro with Mountain Lion. It powers up but does not get past the Apple logo. The hardware test did not reveal any problems. It will also not get any further when I try to start up in Safe Mode. The last thing I was trying to do was connect to it from my desktop which I have done before. Any ideas.

I was able to get into the Repair utility and resolved some Permissions problems. It verified the disk and found no problems. However, it did not resolve the issue. I was also not able to get into Safe Mode.

My itunes does not get the names of all tracks which i import.

When i import a cd into itunes, it does not get any track names. Why is this.
Also, itunes does not connect to the music store. It tells me that i should check my connection etc etc. Are these problems related, and what can i do to fix it?

Let me guess, did you just install/upgrade iTunes?
If so, then it's surely your security software (firewall, web accelerator, privacy filters, etc) that is blocking iTunes.
The iTunes "upgrade" is actually an uninstall, then total new install, of iTunes and QuickTime. Many security packages such as Norton, Zone Alarm, Google Web accelerator, McAfee, PCillin (...the list is long) see this new iTunes install as a malicious threat, and block out the previous settings without telling you.
Go to your security software vendor's website and see if they have directions for allowing iTunes & QT back in the list of programs allowed to access the internet.

User does not get email notifications to his outlook

Hi All,
A user has reported that he does not get outlook notifications for corresponding work items in his inbox.
All the settings are in place i.e. correct email address maintained in SU01 as well as in Infotype 0105 subtype 010.
Not really sure why he alone does not get any outlook notifications.
I tried sending a new message manually from SAP Inbox to his external mail id and was successful in this (checked SOST).
What might be wrong? Please suggest.
BR,
Hari

Hello,
By "outlook notifications" I assume you mean emails telling the user he has workitems waiting for him to action.
How are you sending these emails, with Extended Notifications?
In SU01, besides specifying the e-mail address, have you also put "E-mail" in the "Comm. Meth" field?
Sending an email directly to his external email address from his SAP inbox doesn't prove much, SAP has to be able to deduce the email address itself.
Is it just happening for one user? Has it worked before?
regards
Rick Bakker
Hanai Technology

HT3131 westinghouse SK-261H735S does not get signal from my MACBOOK PRO

My tv (westinghouse SK-261H735s does not get signal from my Macbook Pro, can anyone help?

My tv (westinghouse SK-261H735s does not get signal from my Macbook Pro, can anyone help?

I am getting no sound on my macbook pro. The sound does not play when I plug in headphones either. I have tried making it louder quieter, restarting my computer, HELP!

I am getting no sound on my macbook pro. The sound does not play when I plug in headphones either. I have tried making it louder quieter, restarting my computer, HELP!

There are many possible causes for this issue. Take each of the following steps that you haven't already tried.
1. Start with the steps recommended in this support article. Don't skip any of the steps. It's the starting point for further efforts to solve the problem.
2. If your model has an audio-out (headphone) port, and anything is plugged in, unplug it before putting the system to sleep.
3. If you've installed something called "Memory Clean" or any other third-party software that is supposed to "clean" or "purge" memory automatically, remove it according to the developer's instructions and reboot. You should do that even if the software is not causing the problem, because it's useless.
4. If you've installed an equalizer called "Boom" or anything similar, update or delete it and reboot.
5. If an AirPlay device is selected for sound output from iTunes (or from other applications via third-party software such as "Airfoil"), deselect it.
6. Launch the application "Audio MIDI Setup" by entering the first few letters of its name in a Spotlight search and selecting it in the results (it should be at the top.) Select the Output tab. If the Mute boxes are checked, uncheck them. Move the Volume sliders all the way to the right.
7. If a red light is coming from the audio-out port, the internal switch is stuck in the position for digital output. You may be able to free it by inserting and removing a mini-stereo jack of the proper size. Inserting any kind of tool in the port may cause damage that won't be covered by your warranty.
If there's no red light, the switch may still be stuck in the headphone position. Try to free it the same way.
8. Disconnect all wired peripherals except keyboard and mouse, if applicable. If more than one display is connected, disconnect all extra ones. Reboot and test.
9. Boot in safe mode. Don't log in; just reboot as usual when the login screen appears. When you do, make sure the words "Safe Boot" do not appear in the login screen. If they do, the system is still in safe mode and sound won't work.
10. Reset the NVRAM.
11. Reset the SMC.
12. Reinstall OS X after backing up all data. For a possible shortcut, see this thread.
13. Make a "Genius" appointment at an Apple Store.

Clicks and Pops Soundtrack Pro does not get rid of?

How do I edit out (reduce) clicks, pops? (Soundtrack Pro's fix all does not take care of that!)
What I call clicks (noise) show up in the sample editor as a straight line. I have seen videos of somone erase, shorten these noise-spikes in other applications so one can not hear them.
Is there a tool that I can use to do this in Soundtrack Pro, (Logic Pro)? I am working on audio recordings that were recorded with reel to reels then transfered to a computer with that noise. Please help.
W.W.
Logic Studio, OS X Mavericks (10.9)

Thank you for your time and patience Studio X. I am new at this, the Soundtrack Pro manual gives me a blank page when I seach for waveform editing. Can you please post step by step? (Where and how to do)
W.W.

OKI 5500n driver does not get installed......

I tried it on Macbook Pro intel and MacPro xenon.
in os 10.5.3 the printer just stopped working!!!
When I install the new driver from oki.com It appears that is is getting installed properly but I can not find the driver. I created a separate folder but still does not get installed!!!!
Please help!!!

I just got this working, after calling Okidata at 1-800-oki-data as someone suggested. I had tried installing all the drivers from the oki web site which apparently was not the best thing to do.
The final procedure that worked was:
1) Move Library/Printers/Okidata folder to trash and empty trash
2) Move all other folders in that Library/Printers directory, EXCEPT for PPDs) to a temporary directory on the desktop
3) Reboot
4) Install OSX5C5500E driver
5) Open System Preferences/Print&Fax
6) Click + to add a a printer
7) IGNORE THE OKI PRINTER THAT APPEARS THERE
8) Select "More Printers"
9) Under Oki USB, a printer driver will show up - choose that one.
10) Print - it works now!
11) Move other printer drivers back into Library/Printers
12) Enjoy using Okidata printer rather than buying lots of HP ink.

Just upgraded to MacBook Pro running 10.8.4. Want to convert old movie files to put in Itunes. Can't upgrade QT player preinstalled, so downloaded QT Player 7 and purchased QTPlayer 7 Pro registration code. Can not get it to upgrade. Called Apple 2x.

Just upgraded to MacBook Pro running 10.8.4. Want to convert old movie files to put in Itunes. Can't upgrade QT player preinstalled, so downloaded QT Player 7 and purchased QTPlayer 7 Pro registration code. Can not get it to upgrade. Called Apple 2x. If you have a fix, you can email me direct at [email protected]

Want to convert old movie files to put in Itunes.
What does "old movies" mean to you? File type, audio and/or video compression format(s)?
Can't upgrade QT player preinstalled, so downloaded QT Player 7 and purchased QTPlayer 7 Pro registration code. Can not get it to upgrade.
Did you follow the instructions found here?
If you have a fix, you can email me direct at [email protected]
To which fix do you refer? Activatng QT 7 Pro or converting the files? Even with QT 7 Pro activated you may need to modify your QT codec component configuration depending on the file type and compression formats used to encode your "old movies." There may be many different problems here with each having one or more "fixes." Please try to be more specific regarding your questions. Converting a muxed VOB MPEG2/AC3 file would be very different different from converting an AVI DivX5/MP3 file depending on which application you are attempting to use.

USB hub does not work! Help

I was attempting to install a KVM switch for my G4 and G5 that required me attaching my keyboard and mouse to the usb port on the back of the monitor.
The USB hub does not work! Monitor cable has no bent pins, and works perfectly for video with all my Mac's, G4's, G5's. The problem is I have had this monitor awhile and never tried these ports so apple won't help.
Anyone have any suggestions why these ports don't work and if there is a fix?
Can any one recommend a KVM switch that supports ADC, and USB so I bypass this hub.
Thanks

Some USB 2.0 hardware works very well w/USB 3.0 & some don't. Suggest that you contact the sound card manufacturer & ask them. Perhaps they can recommend a work-a-round.
Another user posted about the same problem some weeks ago regarding a sound card.

HT3986 I installed windows 7 to my macbook pro, but my mousepad does not work in windows 7 and also i can not connect my windows 7 to projector, but i can use my macbook's mouse pad and i can connect my mac to projector,so please help me for windows 7 pro

I installed windows 7 to my macbook pro, but my mousepad does not work in windows 7 and also i can not connect my windows 7 to projector, but i can use my macbook's mouse pad and i can connect my mac to projector,so please help me for windows 7 problem

i try to download now, do you think when i download and install the windows support software, can i fix the problem?

Hp officejet pro 8100 and it does not print bar codes from UPS or USPS

have an hp officejet pro 8100 and it does not print bar codes from UPS or USPS. Can you please please help? i have used my ipad, by HP G62-355DX Notebook and neither will give me printed bar codes. The balance of the mailing label do print, just not the bar code. It may be my imagination, by I believe it used to print thebar codes.

Hi,
Try adding an alternate driver and try to print.
To use an alternate print driver for HP printers in Windows 7:
1. Click on the Start menu.
2. Click on Devices and Printers.
3. Click Add a Printer
4. Add a local Printer
5. Select Create a New Port
6. Select Standard TCP\IP port
7. Enter Printer IP address (Printer IP address can be found by printing network config page from printer
8. Under Manufacturer select HP and under printer select HP Officejet 8000 pirinter or Officejet 7410
9. Click apply and try printing
Although I am an HP employee, I am speaking for myself and not for HP.
--Say "Thanks" by clicking the Kudos Star in the post that helped you.
--Please mark the post that solves your problem as "Accepted Solution"

G/L Account mentioned on line level does not get hit in Journal entry on GRPO and AP Invoice in SAP B1 9.0 PL - 11

Hi,
G/L Account mentioned on line level does not get hit in Journal entry on GRPO and AP Invoice in SAP B1 9.0 PL - 11
I am creating an independent AP Invoice, there are two issues:
1. On line level G/L Account field is not open for selection
2. I have then selected and updated the account on Form Settings. Same account gets updated on line level.
In Journal Entry selected G/L account on line level shall be hitted. But it does not put any effect on JE. Accounting is set by Warehouse. It picks up accounts from warehouse only.
Need help its urgent.
Thanks in advance.

Invoice is Item Type.
G/L Accounts are set by Warehouse. But if explicitly we are want to change the account on line level in that case, it is not getting reflected in Journal entry. On AR Invoice same scenario works perfectly. On line level I can change the accounts explicitly and have the effect on Journal entries.
Issue seems to be on AP side only.
As required please find attached the screen shots.
JEwith mapped GL Account on Warehouse
JEwith different GL Account on line Level via Form Settings
Thanks & Regards
Sonil

My iphone 4 does not register calls made to it. if i make a call from another phone, i can hear it ringing, but it does not register on the iphone. also, i do not get any messages when this happens. then after a day or two it decides to start working.

My iphone 4 does not register calls made to it. if i make a call from another phone, i can hear it ringing, but it does not register on the iphone. also, i do not get any messages when this happens. then after a day or two it decides to start working.

Clean iPhone charging port with clean dry toothbrush. See if better. If still problem clean charging port again with toothbrush and small amount of Isopropyl Alcohol.

Audigy 4 Pro - I/O Hub does not get any po

Similar Messages

Maybe you are looking for