Audigy 4 Pro - Line In 3 Prob

I have been having a huge issue with getting my Line In 3 to play audio from my Television and/or my DVD player. I sent my first Audigy 4 Pro back because I could not get the Line In 3 to work. Now I am having the same problem on a completely different sound card. My DVD player's audio out work just fine when they are hooked into the TVs in, but when I hook the DVD outs to the external hub's Line In 3 nothing comes out of my computer speakers. I am so frustrated with this sound card. Any help would be grateful.

- are all other features working well in Ext. Hub (powerful enough PSU or is the additional power for the A4 PCI card taken from shared floppy power cable))?
I've only ever used the Line-In and the Headphone jack on the front, they work fine. There is a red light coming out of the Optical out on the front (expected). The card does have a 4 pin connection and it is plugged in.
- have you tried w/o other peripherals connected into Hub (just one through line-in 3)?
Yes, same results (but ... see below).
- have you installed latest drivers/software updates for your card?
Where can I find the latest drivers at? I hate to download and install the wrong ones.
- have you tried by uninstalling the CT software suite (least Surround Mixer) and control I/Os through Windows Play/Recording Controls (start run... mmsys32 and mmsys32 /r)
I have not tried to uninstall anything and I type mmsys32 in the command prompt and get an error that it can not find the program.
Update: I turned my computer off last night and turned it back on this morning, plug my RCA cables into my external hub and get a steady low frequency "buzz".

Similar Messages

Audigy LS Line In recording prob

First off I did a search for my problem and I found a couple of posts with my symptom, however there was no real solution or answer given. Here are my two issues:
Line in recording is only in mono. While Im recording, if I look at the Left/Right monitor, the left is moving the right has nothing.
Also the playback volume is very weak. I have the recording volume maxed out and while Im recording the volume is great, the playback volume is 25% of recording volume.
Any help would be appreciated. Thanks!

I was going through the FAQ and found this.... "The left/right LED VU meter provides a visual display of the recording levels. For best recordings, the LED should be around the 80% mark of the bar and it should not be hitting 00% mark constantly."
) only the my left meter moves
2) it only goes about 0% of the way up. According to this, it should be around 80%

Updating the MacBook pro line: how does Apple usually do it?

Hi everyone, I'm planning to buy a MacBook pro and I need your help.
I was wondering if a new pro could be presented in the next months (due to the passage to face time in all Mac products). My questions: has every MacBook updates been presented during a public apple event?
I mean: could apple decide to update the pro line simply modifying it on the store, or it usually does it only organizing a public event? My memory is not so good so I ask if you remember what is the habit in this case, considering that the pro line has been updated many times but I don't remember if presented in a public event or not.

Read my user tip:
http://discussions.apple.com/thread.jspa?threadID=1502615&tstart=0

Sound Blaster Audigy Pro - Win7 software?

) Anyone know?
I have a soundblaster Audigy Pro card and external box.
When Creative get arround to releasing ?drivers for Win 7 will it give me the CMS software and THX Console?
If not will they be releasing software as well?
Thanks?

Kingtech,
I would suggest making sure that the Li've! 24bit is cleanswept and then also cleansweeping out the Audigy 2 ZS and then reinstalling. Here is the cleansweeping instructions:
http://us.creative.com/support/kb/ar...asp?l=2&sid=72
Jeremy

New macbook pro line

hello i was wondering if they will release a new macbook pro line like late 2011 early 2012 because i wan't to get one but last time i bought a mac the new one came out a week later

It is purely speculation at this point so I don't think anything will be very accurate but if you look at the history of releases, MacBook Pros have been refreshed in early spring late winter.

Audigy PRO 4 , failing with direct so

HI i have the audigy pro4 system , with the latest updates from creative i regualrly use teamspeak and in the recent week i've lost input , i can still hear and have sound but but mic stops working, this is due to direct sound failure apparently. Now its happened again and all i did last time was uninstall drivers etc and re-installed then it worked, but i dont want to keep doing this , what is going wrong any ideas?
on ventrilo i also got this error message ,
Directsoundcapturecreate Failed,hr=88780078
so now my input(mic) is not working again and im fed up .plzzzzzzzz any help would be grateully appreciated!
Im running xp pro
amd venice 3000+
2gb ram
x850xt vid
audigy pro 4 sound systemMessage Edited by Spider on 09-0-2006 05:25 PM

>Learn the M audio!!!! <
I KNEW IT!!! LOL!
I just KNEW someone was going to say that. Yeah, $400 and a year later it is sitting in a drawer. I don't have the time. The "manual" is even worse than Creative's "user guide". It is assumed if you spend $400 you have a clue. I'm a Guitarist! Not a keyboard player. We walk into the studio, plug in, play our parts, get paid, then go out for pizza.
It took me long enough to figure out Acid, Waves plug-ins and T-Racks before I finally had some quality production values. I can't speed another year learning M-Audio's firewire "controls".
Come on. Someone must know what is up with the "value".
Do I need to reinstall the drivers? What?

Help -- Getting my Audigy Pro 4 RM-1500 working in windows 7 X64

@Help -- Getting my Audigy Pro 4 RM-500 working in windows 7 X64. To anyone who can help
?I used the latest version of daniel_k's most excellent drivers to install?my Audigy Pro 4 ?(with external box) on a Windows 7 X64 operating system and all the audio devices I have tested so far have worked great.
However, I can't seem to get the rm-500 remote working. I have installed the lasted (0/30) version of mediasouce5;? and the drivers for my remote do not seem to be included.
The closest I can come is the beta version of the vista entertainment center which does install a remote control settings configuator. However, it doesn't seem to recognice the Audigy Pro 4's version of the rm-500, even though it is listed as an option. I get a "can't find an ir device" error.
Any suggestions for me as to how I can get it working, if it all?
Much Thanks!
Jackalope

D When I was beta testing Windows 7, I had the same problem with my remote for X-Fi Platinum Fatalty Champion. I discovered a program called Intelliremote (just Google it) that worked great. It works with Creative remotes. I found for some reason the beta driver of entertainment center, in compatibility mode, works with the final version of Win 7. I hope this hel
ps.

Audigy 2 zs platinum pro lines in (1-2-3) no so

I installed Audigy 2 zs platinum pro drivers on windows XP and i can't get no sound of any line in (/2/3). I have tried several different devices and anyone worked. My motherboard is Asus P4P800E - Deluxe. Please, help me...

I have EXACTLY the same proble. There is not only no signal in, I cant hear anything monitored at all when using Cubase or in fact any other sound application. The only sound I can hear is when I plug my speakers/headphones straight into the back of the sound card. I checked my 'Digital Output Only' setting as previously suggested (it wasn't checked) - still no joy.
Somebody please help....

Audigy ZS Line-In prob

Hi, just a quick problem I need a little help with if possible? I have just basically bought the Audigy ZS Soundcard, here is my problem. I've been hooking up my turntables to my PC via the Line-In port on my Audigy Soundcard to back-up my vinyl. Everything sounds very very good, the sound quality I'm very happy with......except, I've noticed whilst recording, if someone sends me an instant message via MSN, or I open a new folder, the click or MSN sound also gets recorded? This is obviously quite annoying as it means I can't do anything else whilst recording, I'm pretty sure it shouldn't be like this and should only record input coming through the Line-In socket? Please tell me if I'm wrong or how to fix this problem. I was recording earlier, whilst recording I began listening to an Online radio station, then to my horror when I played back my recording, I had my record with radio over the top!!! :-( Any help what-so-ever would be much appreciated. Thanks in advance

Hi Jeremy
The noise I get is a background static.
The TV card I'm using is a WinTV-USB Hauppauge ( I know its not very high quality )
The cable is sheided good ( I used the same cable with my all in wonder pro 9700, but thats in a diff. machine now)
I unplugged the line in cable from the win TV but left it in the sound card and was still getting the static.
I'm going to look for a different cable to see if that works.
Thanks for the Ideas.
Jim

Audigy 2 ZS Plat. Pro and Soundforge 8 Prob

Got a question... Currently I have to record 48,000Hz - 6bit Stereo and down sample to 44.K to make a CD. Anyone have any clue when I choose 44. from the get go, I get an error saying "An Error Occurred while opening an audio device. An Unsupported media type was requested. Details >> :Line-In L/Line-In R does not support 44,00 Hz at 6 bits"
Under Options>>Preferences>>Audio tab:
I have selected "SB Audigy 2 ZS ASIO [DF00]" as the device, Default playback is "Wave" default recording device is "Line-In 3 L/Line-In 3 R"
Ive tried selecting other recording devices even tried changing the Audio device type to "SB Audigy 2 ZS ASIO 24/96 [DF00]" even "Creative ASIO" and get the same error anytime I record @ 44. x 6bit....
Any Clue?

already asked and discussed in the last 3 days.
http://forums.creative.com/creativel....id=79342#M940
next time do a search before posting in a new thread, it helps keeping lisibility and finding quicky users with the same interest.

Audigy SE line-in prob

I have just purchased an Audigy SE and am having a problem using Line-in.
I am using a Gigabyte GA-7VAXP motherboard with onboard AC97 audio ( turned off using Bios ). Running Windows XP SP2
When using audio input from the Line-In, in the Surround Mixer all lines are muted except Master Control Volume and Line-In. All works well.
If I turn off the computer, when I reboot there is no audio out via line-in, though audio can be played via WAV input using internal players. There is no signal at the Record volume slider as I cannot record with an alternati've program.
If I un-mute either Microphone or S/PDIF-In, Line-In is automatically muted. ( On un-muting the Microphone input I get loud distorted sound ). If I now un-mute the Line-In it works as normal.
If I 'Restart' rather than 'Turn Off' the computer, audio starts to be heard almost as soon as the initial 'Windows Xp' screen is displayed and considerably before I get 'Windows starting up'
Any suggestions would be appreciated. Thanks

I just bought the Audigy SE and everything went sommothly until I tried using the Line In jack. I get nothing. On board audio is disabled, I removed all sound drivers, cleaned the registry, and reinstalled the Audigy softwar to no avail. Any help would be apreceiated. Sound output is great though. I used the same Line source with the built in audio system and had no problems. It is imperati've that I get this port working, as it playde a huge roll in the tasks I was undertaking. THere is a download patch hat fixes something. It is 55 Mb. I am on a slow dial up connection and it would take me a week or so to grab this file. My Modem is my Cell Phone and the Computer dopes not keep it charged, so I am limited to small chunks fo time after 9:0PM until 6:00AM which are off peak hours so it dowen't cost me. I li've a long way from any town around me abuot 20 miles. Our town has one cell tower and I li've almost 5 miles away from it. I have to use an external antenna just to connect. Help Me!

Audigy 2 ZS Platinum pro with RM-1500 prob

Doesnt work. When i first got the card the remote worked fine. It's been a while since and i'd like to use the remote again. I instaled the drivers that were on the CD, the remote didnt respond. Downloaded the newest drivers from the download site, installed them and the remote still doesnt work.
Some info:
the remote is RM-500,
theres that 5'25 dri've unit with the IR window on it,
i checked the MEdia Source remote section, the remote is enabled, correct type selected (RM-500)
the remote it self appears to be working (i checked it with a webcam, the diode on top flashes when i press buttons on it)
all the cables are connected to the 5.25 bay unit (the optical out glows red, im using it at the moment)
i also tried the third party softwar (uICE), it fails to see any response from the remote.
i have no indicator light on the bay dri've to see if the signal is being recieved or not.
the card it self works fine in other ways, ie i have no noises from it or any problems.
i just suspect that the remote reciever is toast somehow.
any ideas? thanks!

I would like to add my two cents to this. I had an RM-500 which stopped working after a while. My MCE IR receiver seemed to pick up an infra-red signal from the thing but the dri've bay didn't respond.
I then tried an older RM-900 from an old Audigy installation and that worked perfectly with the dri've bay. So in my case, the RM-500 was dead ( the battery was ok ).

SB Audigy 2 ZS Plat Pro, Line in / Power is

For more than a year i have been trying to get my desktop break-out box to accept an input from my guitar. I have tried all the ports and combinations of software/drivers and amps etc to no avail, i haven't really had a good go until now, just sort of had a brief attempt then forgot about it for a while each time. Now i come to sit down and work it out i realise that the power light on the right hand side of the box is out, and i cant remember ever seeing it on. How is the units power supplied? I cant see any external ports for power supplies via a transformer and cant seem to get the main leads from the computer to supply power either. I have read in other posts that the light should come on, but it does not say when or how, is it a driver i am missing or do i have a faulty cable. How can i check ? I am running the original drivers which came with the soundcard and have reverted to them as the new drivers dont allow me to use the full features of the card via the menu system, they just seem to be windows drivers and have no graphical user interface. Thanks for your answers in advance, the FAQ was rather lacking in decent help.

OldPainless,
I'm hoping that means that you found the connector and all is working now? I know it happens around here more often than we would like to admit. Frequently swapping out hardware leads to forgotten things like this.
Daniel

Audigy 2 ZS Platinum Pro External IO Box prob

I am unable to get the earphone or mic ports to work at all on the external IO box. The power light is on and is strong. The CMSS button seems to not do anything and the remote does not do anything as well. I have a 480W PS so it should have plenty of power. I just want to use the external mic and headphoe jack. Does anyone have an suggestions on what I can do to get the external box to function?

even i had the same problem, but i found that the AD_LINK connector was not properly connected to the soundcard. It may seem to get connected but even with a slight pull it comes out. The cabinet metal strips at the back obstruct the connector and it doesnt get connected properly.wat i did was, before installing the CARD on to the slot, i connected the AD_LINK first and then put it in the slot.
This problem generally doesnt occur with the FIREWIRE connector as theres plenty of room above and below the connetor. and so ur IO Box is Powering UP but fails to communicate with the sound card.

No signal from audigy 2zs line out j

Hey there....due to a virus, I recently had to format my dri've and reinstall XP and all my apps including software for my Audigy 2 ZS soundcard. Before the format I had my sound and video card connect to my TV to extend my PC display and audio to my home entertainment system. The external speakers were connected through the line out # jack on the rear of the sound card and I could hear everything playing just fine when my TV was on and the correct video signal line input was selected (video #2 in my case), but now I can't hear anything (video is playing back fine on the TV, just with no sound). I've checked my audio settings and I think they're correct - if there is a mute switch for any of the line out jacks in the creative audigy software or in windows' volume control panel I sure can't find it.
I'm sure its a settings thing because I didn't touch the cable connections, and I double checked to ensure they are all connected tightly/correctly as they were before the reinstall.
If anybody has any pointers, man that would be helpful....thanks!

Yup, my digital speakers are connected through the digital out jack.
Device manager shows the device working correctly - no issues or exclamation marks.
Not one ioda of hardware was moved, not one cable unplugged or any other config changed before or after the re-formatting of the hard dri've. Software o/s and applications only.
The soundblaster card properties in device manager shows no conflicts....everything is working fine, but there is a setting somewhere that is being missed I suspect; I have gone ever every option in all of the soundblaster audigy audio control software installed that came bundled with the card, checked online for latest drivers which I've got installed, and did a clean uninstall/reinstall using creative's 6 step-by-step guide. I also checked all windows xp based audio controls even though I've checked the option that enables the audigy controls to sync with the windows ones as you probably already know.
To my knowledge, there is no way to disable line out signal from this card - its there, you plug in your external and go. And with no config changes at all, no hardware changes, no cables unplugged etc. I don't know what else to do. (except email creative support which I did a few minutes ago).
Thanks Katman.

Audigy 4 Pro - Line In 3 Prob

Similar Messages

Maybe you are looking for