Audigy 4 Pro - Unable to monitor both Line-in 1 and 2 at the same t

I was under the impression when I bought this sound card with the external box that I would be able to monitor multiple line ins at the same time. I have a Korg TR-6 keyboard on the way and it will be here tomorrow, and?I just bought expensi've .25 inch cables to run from the L / R jacks of the keyboard along with the midi cables. Thus far using my .25 inch mic, I have been unable to get any signal from my Line-in 2 jack regardless, but what I've also found is there is no way for me to monitor both inputs at once.
Am I not able to monitor two inputs at the same time? Is the reason I cannot hear my mic when it's in line-2 because it's not a powered mic and relies on amplication? I'm really really concerned that I will only be able to do a mono-output, unless you have other suggestions?
Can I convert two .25 inch lines from my synth into SPDIF or anything? Please advise, I really have invested a lot of money into this already.

I've been trying to figure this out all night, still can't find anything even after tons of google searching. I'm worried I'm going to have to buy a midi / xlr interface to do the job right, even though this was advertised as a device perfect for musicians (we couldn't expect both a Left and Right input at the same time?).
If someone could please get back to me I'd really appreciate it.

Similar Messages

I can hear both a clean sound and distortion at the same time.

I can hear both a clean sound and distortion through my monitors and headphones. I am playing into a Presonus USB and directly into a MacBook Pro. Any idea how I can get rid of the clean sound?

You probably have a mix knob on your interface that switches between dry and wet signal. The knob should mix the signals.

On my PC, can I have both indesign 5.5 and 6 at the same time?

I like working in indesign 5.5 for one magazine but i need indesign 6 for another. Can i install indesign 6 and run them both at the same time?
Do i need the full version of both or is the upgrade to 6 enough to do this?

The upgrade and non-upgrade versions differ only in price and the installer looking for a qualified upgrade product. The programs themselves are the same.
As we said before, you will have no problem with both versions installed (I run back to CS3 here). If you purchase an upgrade, though, you must choose the right one. If CS5.5 is a Suite package you cannot use an InDesign-only upgrade.

Can I sync both my ipod Touch and iphone to the same itunes account.

I have an ipod touch and ipod classic that both sync to the same itunes account, and I'm thinking of getting an iphone. Will I be able to use the same apps on the iphone and ipod touch?

Hello and Welcome to Apple Discussions.
It won't be a problem. You can use an 'unlimited' number of devices (iPods, iPhones etc) on a single iTunes account.
I rushed off to O2 on Friday after work and got myself an iPhone.
I backed up the iPod touch first (which was running 3.0 by that time) and then activated the iPhone using the iPod touch backup. Pretty much everything synced across exactly as it was on the touch (i.e. all Apps and paid apps), notes etc. One app I had never got to run on the iPod (iOSMaps) suddenly appeared on the iPhone too. Much like when you get a new Mac you find that all your settings and windows are preserved. When I opened Safari on the iPhone the last two pages I'd been looking at on the iPod were open. The only things that didn't sync were my emails - which of course downloaded shortly after the account details were synced (this is as expected), the iPhone suddenly being named 'iPod touch', my home WiFi password didn't sync and my email signature (not surprisingly still read - Sent from my iPod touch'.)
regards
mrtotes

Can i take both Receveing of audio and video on the same window.

hi,
i m using AVTransmit2 and AVReceive2 for Transmission and Receiving all is doing well but problem is that AVReceive2 show Transmission of audio and video in both different windows and it use different players for audio and video. Can u tell me can i merge both audio and video at the receiving end. i m already mergeing audio and video at transmission end ???. any one tell me how can i solve this problem ???
thx in advance.

Hi,
I have the same situation - to use one window to show both rtp audio and video stream, but use the ControlPanelComponent of audio player to control both players.
I want to use the audio player as the master player so that the video player could be synchronized with it. So: audioPlayer.addController(videoPlayer).
In the only window frame for both players, I want to show the VisualComponent(VC) of video and the ControlPanelComponent(CC) of audio. So I add both components respectly to the window frame, after I got them from each player. Because the streams are coming from the network over RTP, and they do not become realized at the same time, I add the VC and CC of first realized player(no matter it is audio or video) to window frame at first, and then change them to the desired video VC and audio audio CC.
Though I check both player are realized and not started before I call the addController() method, the application stucked in this method. Of course I call it in a try block but no exception was thrown out.
when I use TimeBase to synchronize them, i.e., videoPlayer.setTimeBase(audioPlayer.getTimeBase()), everything goes fine. But, I can not control both players from one ControlPanelComponent in this way.
Anybody having any idea to solve this problem please reply.
By the way, in the example code such as AVReceiver, where audo and video streams are shown on two window seperately, user can use the ControlPanelComponent of audio to control both player, though it seems no relevant code to support that function. The ControlPanelComponent of video can not control the audio player anyway. Anyone having any explanation to this?

Can Logic Pro X use a mic on a Duet and USB at the same time?

Seems that it's either or. When it asks where you are getting your microphone from, it's not a per track basis. It did recognize the USB mic when I plugged it in but changed the setting and the mic off the Duet was gone.
(Trying to record a podcast in latest Logic Pro X.)

You have to use apple's audio/midi utility to create an aggregate device from the mike and the duet, and then select that as logic's audio interface

I am trying to play a DVD on my MacBook Pro and transmit it to my TV (use my TV as the monitor) utilizing a VGA cable and adapter for the Mac but the only image that shows up on the TV is the MacBook wall paper, any ideas on how I can transmit to my TV?

I am trying to play a DVD on my MacBook Pro and transmit it to my TV (using my TV as the monitor) utilizing a VGA cable and adapter for the Mac but the only image that shows up on the TV is the MacBook wall paper, any ideas on how I can transmit the movie from my MacBook to the TV? I also tried an HDMI cable and had the same issue.

you are probably seeing the extended display.. to see ur main display go to pefrences then display steeings and turn mirroring on.
this will display ur mbp main screen. good luck.

HT3204 Having purchased a Bluray of Les Mis with a digital download, I am unable to download the film through iTunes with each time I try it stops at 1.43GBytes. I have attempted both Win8 PC and iPad with the same result. Any ideas?

Having purchased a Bluray of Les Mis with a digital download, I am unable to download the film through iTunes with each time I try it stops at 1.43GBytes. I have attempted both Win8 PC and iPad with the same result. Any ideas?

Hello there, TindyBobbin.
Just to make sure, here is a Knowledge Base article that reviews the process for downloading a digital copy:
Transferring or downloading an iTunes Digital Copy
http://support.apple.com/kb/ht1539
If all of the steps still do not help with the download, you may want to follow what is mentioned at the bottom of all instructions:
If you are experiencing issues downloading your iTunes Digital Copy, please contact iTunes Store Support.
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro D.

My SB Audigy 2 card can't use headset and musicamplifier at the same time

Hi, i just bought a SB Audigy 2 [D400] and i have downloaded drivers and programs. I run Windows XP SP2.
The soundcard works fine but it is very very annoying that i physically have to change the jack in the green=line out jack from headset to musicamplifier when i want to use my musicamplifier and change back the jack in the green=line out from musicamplifier to headset when i just want to use the headset/headphones .
In the shop they told my that i can connect both amplifier and headset at the same time and then with creative software control whether there is sound in the headset or in the amplifier. But i can't simple get it work.
I tried to use the green to the amplifier and the headset/speakers in the black (line out 2) and then with creative speaker settings softeware choose headphones but still the ampliefier receive the sound and no sound in the headphones. Why? In fact no matter what configuration i try the headphones doesn't work.
But if i change the jacks so headset is in the green line out then only headset is working and the amplifier doesn't work no matter i put it in sort=line out 2 jack or orange=line out 3 jack.
Can somebody here tell me if it is possible or not to connect both headset and external amplifier and control by software which to play? and how?
please help, thx.
Michael

If you can have an ASIO compatible music playing system, then it might be possible to have system like you wish when using Creative Audigy 2 card. Since ASIO bypasses Windows Audio System, you can use both 'drivers' (ASIO - WDM/MME/DS) side by side.
Say you want to play a game (using headset /w mic) and someone other like to listen music at the same time. With ASIO capable system you can output your music for example to "center L/R (stereo) channels" and same time output sounds from other source (using MME/DS/WDM drivers) to normal output channel (Front L/R). Only thing is, you need to set your speakersystem to 4 or 6 (depending which other channel you're using) (and for better 'balance' to adjust "angle" on THX console. You get the THX console by installing Audigy 2 Zs software).
Try for example http://img332.imageshack.us/img332/463/djs9mo.jpg[/img] width="406" alt="Image Hosted by ImageShack.us" >
Another option:
Say you want to play music through external amplifier and play game online with your headset + microphone (eg. others but you listen the music, you play games)
--> try free http://img332.imageshack.us/img332/4589/tbp7rz.jpg[/img] width="406" alt="Image Hosted by ImageShack.us" >
If you use ASIO on BeatPort Player you can select L/R individually from the list(s). Same rules as described earlier.
= You can play from 2 different sources simultaoneusly (ASIO + WDM/MME/DS) to two different outputs without disturbance. The other (WDM/MME/DS) source is set 'automatically' output to (Audigy) "green" port, and the other (ASIO) to "black" or "orange" port (as set).
.jtpMessage Edited by jutapa on 09-5-2005 05:30 AM

I have Adobe Photoshop Elements 10 and Adobe Premier 10 loaded on a Dell PC. Do I need to uninstall from the Dell before I install on a recently purchased Apple Mac Pro? There are separate disks for Mac and PC in the package.

I have Adobe Photoshop Elements 10 and Adobe Premier 10 loaded on a Dell PC. Do I need to uninstall from the Dell before I install on a recently purchased Apple Mac Pro? There are separate disks for Mac and PC in the package.

Generally, it's ok to install on two machines as long as they are both yours and you only use one version at a time.
BTW, this is the forum for Adobe Contribute.

I get an "unable to connect" message yet I can connect and use Internet Explorer with no problem. I tried updating to Firefox4 and still get the same message. What do I do?

I get an "unable to connect" message yet I can connect and use Internet Explorer with no problem. I tried updating to Firefox4 and still get the same message. What do I do?

JungleTaxi Cabbie wrote:
Csound1: iCloud: Configuring Mail with Mac OS X v10.6 or iOS 4
Enter your Incoming Mail Server, User Name, and Password using the following settings:
Incoming Mail Server: mail.me.com
User Name: Your iCloud email address (excluding @me.com)
Password: Your password
Last Modified: Jun 27, 2013
Maybe you should test these things before calling people out, because these settings do function perfectly well.
iCloud is not supported on Snow Leopard or lower, why bother to mention it?
The OP has an iCloud account, and that can not be opened without Lion or Mountain Lion (on a Mac), IOS5 or 6 (on an iPhone/iPad)
The document I linked to is Apples documentation for iCloud on current devices,I don't care whether you believe that you know better than they do, but it will affect the people who follow your advice as it won't work
JungleTaxi Cabbie wrote:
Also, if you're not running Lion or Mountain Lion, there is no "Mail, Contacts & Calendars" prefpane.
I never said that there was, perhaps you imagined it.

Can I use HP Pro 8600 with usb and wireless at the same time

Can I use HP Pro 8600 with usb and wireless at the same time? Sometimes I cannot get the wireless to work, it seems to be my laptop. It would be nice if I could use the usb, but it doesn't work. What should / can I do, if anything?
Sam

Hi,
Same physical printer but when connecting to SAME computer using both USB and wireless it becomes two (logical) printers. Probably your default prnter is the wireless one, you have to select the right printer before print .
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

I found My iPhone contacts on my friends Iphone we both have 4s! But we use the same apple ID and ICloud ID! How can undo what happened? all my private stuff is now on his phone!!! help me plz!!?

I found My iPhone contacts on my friends Iphone we both have 4s! But we use the same apple ID and ICloud ID! How can undo what happened? all my private stuff is now on his phone!!! help me plz!!?

Of course if you are both connected to the same iCloud account you have the same contacts - what did you expect?. The contacts live on the server and are read from there by the devices; so as you've both managed to sync your contacts up to iCloud they are now inextricably mixed. You can only delete your contacts by deleting individual ones, and doing that will delete them from your phone as well.
You can only unravel this by
1. In the iCloud contacts page at http://icloud.com, select all the contacts, click on the cogwheel icon at bottom left and choose 'Export vCard'.
2. Sign out of System Preferences>iCloud
3. Create a new Apple ID and open a new iCloud account with it for your own use.
4. Import the vCard back into the iCloud contacts page.
5. Go to http://icloud.com and sign in with the original ID. This is now his ID. Work through the contacts individually deleting the ones you don't want him to have. When done sign out and advise him to change his password.
6. Go to the new iCloud account and delete his contacts individually.
Of course if you have also been syncing calendars and using the same email address there are problems with doing this.

My Ipad mini does not see my printer. my wife's ipad2 does. We both use IOS8 and upgraded at the same time. How can I remedy this?

My Ipad mini does not see my printer. my wife's ipad2 does. We both use IOS8 and upgraded at the same time. How can I remedy this?

OK great info!
I found 2 possible ethernet to USB adapters:
By "Plugable": USB 2.0 to ethernet LAN wired network adapter - seems this will work, but I'll contact Plugable.
2. Apple USB Ethernet Adapter
Easily connect your MacBook Air computer to an Ethernet network with the Apple USB Ethernet Adapter. Small and light, it connects to the USB 2.0 port of your MacBook Air and provides an RJ-45 connector that supports 10/100BASE-T performance. BUT NOT SURE IF THIS WILL WORK ON ANYTHING BUT a MacBook Air…
One person commented:
This little gem used to be the device of choice for adding a second Ethernet interface to a Mac Mini Server and I'd been using one that way for about a year. After doing a software update to 10.6.6 it stopped working. Forewarned is forearmed – it appears that Apple is finally enforcing the MacBook Air system requirement.
Thanks for any additional comments.
Best regards,
Steve Schulte
Sunday 6 January 2013

I downloaded and bought a movie from iTunes on my iPad and now want the same movie on my MacBook Pro but its not offering me to download it, it giving me the options of buying it which I already did. How I get the movie onto my MacBook?

I downloaded and bought a movie from iTunes on my iPad and now want the same movie on my MacBook Pro but its not offering me to download it, it giving me the options of buying it which I already did. How I get the movie onto my MacBook?

You can connect the iPad to your Mac's iTunes and do File > Devices > Transfer Purchases, that should copy it over to the Movies part of your library.
Depending upon what country that you are in, and whether the film studio allows it, you might also be able to re-download it on your Mac via the Purchased link under Quicklinks on the right-hand side of the iTunes store home page.

Audigy 4 Pro - Unable to monitor both Line-in 1 and 2 at the same t

Similar Messages

Maybe you are looking for