Audigy 4 rear audio comes from front speake

Whenever I caolibrate my speakers they work fine. However, when I go into speaker settings all of the rear right audio comes from the front right and rear left comes from the front left. I'm using the analog outs on my sound card. I've uninstalled the drivers and disabled my onboard sound. I've uninstalled and reinstalled the card, reset the defaults in the console, and updated the drivers. The only peripheral I have hooked up is a Fellowes brand mouse. I checked the outs on the sound card itself and audio only comes out of the front out, the green jack. I've seen that some people have problems with the drivers not working because the sound card is not recognized, but my computer recognizes it as and Audigy 4.

Actually, this is the situation w/ Audigy 2 (6. card) too --> something strange w/ output channel mapping:
Speakers set to 6/6., CMSS OFF, 5.2.8.64 drivers. This PC has only GB or RAM.
With WDM, WDM/KS and Asio4All (uses WDM/KS functionality) drivers, output channels are mapped as:
/2 ==> Front L/R
3/4 ==> Front C/Sub L/R
5/6 ==> Rear L/R
7/8 ==> Front L/R
when expected would be
/2 ==> Front L/R,
3/4 ==> Rear L/R
5/6 ==> Front C/Sub L/R
(7/8 ==> Front L/R) ?
<i>With both Creative ASIO drivers channels are mapped as expected:
Front L/R = Front L/R
Rear L/R = Rear L/R
Front C/Sub L/R = Front C/Sub L/R
</i>
jutapaMessage Edited by jutapa on 08-24-2006 0:43 AM

Similar Messages

XP 64 bit - 5.1 - Rear Sound comes from front Speak

Hi,
i have upgraded from xp 32 bit to XP 64. I have a problem with my elite pro:
This card ist playing now the 5. rear sound on the both front boxes. I'm extremly frustrated because i'm trying to solve this problem since 5 Hours. I have tried a lot of drivers - the rear sound comes from the front.
Anybody any idea ?

"You know, you could just walk behind your computer and switch the cables front and rear cables... "?Brilliant, that would make all sound come out the rears. Why didn't I think of that??I've cleaned and reinstalled, tried drivers without updates, updates without drivers, the best i can do id enable CMSS 3D and get a kind of *******ised stereo that i cam fade front to rear. I cannot get 5. separation with XFi XtremeGamer Fatalty Pro under XP64 and 4gB RAM, and it REALLY pisses me off that I accidenetally helped the OP and I'm stuck with the same issue LOL.

Audigy 2 ZS - REAR sound comes from FRONT speak

This is an odd one.
My "surround sound" is busted. All sound meant for the rear speakers come out of the front speakers, even in the "Test Speakers" control panel where it says each channel. The ONLY place this works from is in the Speaker Calibration control panel, where it plays the test sounds and has you adjust the volume/balance between the LR/FB/center channels - the test music plays properly there - but that's the ONLY place.
My setup used to work - and as far as I know nothing has changed, except maybe an updated SB driver.
Any ideas?

Redfi've878 wrote:
Just updated to the latest drivers and this is exactly what is happening to me. Anyone ever come up with a fix?
With the help of another user, I figured it out.
Do you by chance have a Logitech QuickCam Pro camera? If so, it is setting the audio hardware acceleration setting to "Basic". It can't be restored to Full without unplugging the camera, setting it to Full, then rebooting, or disabling the camera's automatic echo cancellation function.
I hope this helps!

HT1595 I have just bought apple tv which allows me to play music through airport express but when chose to watch a movie the audio comes from the tv and does not give option listen through other speakers served through airport express. Can you help me ?

I have just bought apple tv which allows me to play music through airport express but when chose to watch a movie the audio comes from the tv and does not give option listen through other speakers served through airport express. Can you help me ?

No, you cannot seperate the audio and video stream.
You can use optical audio to a sound system (I use sony sound bar) and play the audio via that.
jules

When using Multicam in CS6 how do I choose which source file the audio comes from?

I've noticed when using the Multi-cam window to create edits, the audio does not change when I select the different video sources. How do I select which source file the audio comes from?

It doesn't make sense why the multicam source sequence only uses one track of audio. Was this by design? The issue with this as in my situation (and because I didn't know this) I recorded all my source videos with the music tracks on the right side which is what I'm using to cut my video with. Not being able to hear this while I'm cutting is really frustrating. There's a reason I separate dialog on the left side and music on the right. There should at a minimum be an option while setting up the multicam to choose more audio options. Even in the audio clip option settings, those don't seem to work when a clip is put into a multicam source sequence.
The other issue is when you bring in the audio after the fact or even before, there's no way to sync timecode with audio to the multicam sequence. When I create the Multicam source sequences in my project bin, I choose sync with timecode, not in points, because the record decks I'm using are all locked with a TC gen during the shoot.
Maybe I'm missing something, but there seems to be either a bug with multicam or a design flaw. Even in the help documentation, it states multiple audio tracks can be brought in with the multicam sequence, but only track one is enabled by default. I've never been able to have the MC sequence bring in more than one track of audio no matter what the audio settings are.

When headset is inserted, why does sound continue to come from the speaker?

When headset is inserted, why does sound continue to come from the speaker?

Sure your inserting the headset into the Headphone Out port and not the In port..?
Also what headset....?
Most PC based headset with built in mic's will not work without using a device like the Griffin iMic.

Rear sound goes to front speaker with DDL/DTS Connect (Xfi Platinum)

DRear sound goes to front speaker with DDL/DTS Connect (Xfi Platinum)T Hey there,
I just installed the newest modded driver from [url="http://forums.creative.com/t5/Sound-Blaster/X-Fi-Auzen-2-20-0002-0-RC4-2-dated-5th-November-2009/td-p/540790">here[/url] and now I have the problem that when using DDL/DTS Connect (yes I have it activated!): the rear left channel gets output on my front left speaker, and the rear right goes to front right. My externaldecoder is correctly identifying the output stream as DD/DTS and the front speaker and subwoofer works fine. Also when using my Xbox 360 the sounds correctly get to the rear speakers, so this is likely not a problem of my decoder.
Anyone had a similar problem to this? Any idea why this happens?
My system:
Windows 7 x64
Intel Core2Quad Q6600
4 GB RAM
nVidia Geforce 9800 GTX+

H I noticed this doesn't just happen with DDL/DTS Connect. The same behaviour happens when I connect my headphones to the plugs on the back of my computer. The rear plugs don't output anything, while the front plugs have "double" output.
I tried all kinds of different drivers, always removing the previous ones and restarting before trying a new one. Right now I'm with the official 2.8.003 X-Fi driver.
Please, somebody help!

Audio out from internal speaker, how?

I purchased iPhone 3G 8GB, before that I have been using iPod touch. With iPod touch audio from games etc came out from internal speaker if I did not plug earphones. But for some reason that does not work with iPhone 3G.
Only very few apps uses internal speaker with iPhone 3G, like iPod app. But rest of apps does not play audio before I plug earphones. Is there away to fix this or is there something wrong with my new iPhone 3G? I purchased two days a go.

all sound should come out of speaker if headset isn't plugged in. check in sound settings that "silent" vibrate isn't on.
also some apps have there own volume settings so even if you turn the apps sound down the phones other sound stays the same, such as the ringer..

No Audio comes from my Elitebook 6930p when i connect it to the USB Docking Station

When ever i connect my Elitebook 6930p to the USB Docking Station, the Audio from my Laptop does not come.
The Audio works very well, without the USB Connected.
Looks like the Docking station is bringing the Audio out through its own ports, to be connected to the external speakers.
However i dont have any external speakers and would like the Audio to come out from the Laptop only.
The USB Docking station is : HPK HSTNN-S01X(B)
And my Elitebook is running on Windows XP.
Please suggest a way to do it.
Cheers
Ameet

Well, it sounds like your windows sets your audio output to your docking device?
Perhaps you should look from Sound options (in control panel) what playback device is being used when audio comes out right. Then dock it and see if it changes? if it changes, set default device back to what it was when it worked.
With this info i have i can't help you more. Hope it works.

Mono audio playing from left speaker only

For websites who have mono recorded (single channel) podcasts, audio in firefox will only play from left speaker instead of picking center channel.
If audio is downloaded and played on seprate dedicated player it defaults to center or if same site is played in IE also defaults to center.
Stereo recorded podcasts have no issue.

I assume that not a Flash player is used in this case, but that this is an issue with the (built-in) HTML5 media player and the audio tag is used.
Is that correct?
The Flash player should show the Flash context menu if you right-click the player area.

Constant Audio Beeps From the Speaker

My OS X has an erratic behavior. When I go to any application's menu to select, everything in the menu to select get highlighted and it goes up and down with constant audio beeps from the studio speakers.
The console module state:
Mac OS X Version 10.4.10 (Build 8R218)
2007-07-18 18:52:43 -0500
2007-07-18 18:52:48.157 SystemUIServer[208] lang is:en
bit length overflow
code 7 bits 6->7
bit length overflow
code 5 bits 6->7
bit length overflow
code 4 bits 6->7
bit length overflow
code 4 bits 6->7
...and etc.
Jul 19 05:41:35 studio DirectoryService[79]: SafeOpen::Call to netinfo_open was with argument domain name: .. and lasted 3 seconds while timeout was 3
Is there a quick fix for this? Nothing from disk utility will fix it.
Any ideals because for some reason, I feel doomed?
Thanks,
Al

Hi DJ,
When Disk Utility can't do the job, call in the experts and get either DiskWarrior at http://www.alsoft.com/ or TechToolPro4 at http://www.micromat.com/
Carolyn

Motherboard no rear audio when "disable front panel jack detection" not selected

I recently built this system.
Motherboard: MSI P67A-G43 (B3) LGA 1155 Intel P67 SATA 6Gb/s USB 3.0 ATX Intel Motherboard
Processor: Intel Core i7-2600 Sandy Bridge 3.4GHz LGA 1155 95W Quad-Core Desktop Processor Intel HD Graphics 2000 BX80623I72600
Memory: G.SKILL Ripjaws X Series 8GB (2 x 4GB) 240-Pin DDR3 SDRAM DDR3 1600 (PC3 12800) Desktop Memory Model F3-12800CL7D-8GBXH
Video Card: EVGA SuperClocked 012-P3-1572-AR GeForce GTX 570 (Fermi) 1280MB 320-bit GDDR5
HD 1: OCZ Solid 3 SLD3-25SAT3-120G 2.5" 120GB SATA III MLC
HD 2: Western Digital Caviar Black WD2002FAEX 2TB 7200 RPM SATA 6.0Gb/s 3.5" Internal Hard Drive
Additional NIC: Rosewill RC-400 10/ 100/ 1000Mbps PCI V2.2, 32/64-bit, 33/66MHz Networking LAN Card
DVD: SAMSUNG Black Blu-ray Combo SATA Model SH-B123L LightScribe Support - OEM
Power Supply: OCZ ZT Series 750W Fully-Modular 80PLUS Bronze High Performance Power Supply
Case: Antec One Hundred Black Steel / Plastic ATX Mid Tower Computer Case
I also have an old Creative 4.1 speaker system (been around for about 10 years from system to system)
It worked flawlessly....until.....this morning my daughter was watching NetFlix and she plugged in the headphones. The sound muted the rears (as it is supposed to do) and sound came through the headphones (front jack) as it was supposed to do. She said some popup appeared to which she didn't read and just hit OK (doh!). Now I am unable to get any sound out of the rear speakers when unplugging the headphones. After much playing around, if I un-check "disable front panel jack detection" in the MSI Audio Manager then the sound once again works from the rear, however (as can be expected) it doesn't mute it when the headphone jack is re-plugged in. Strange, thing is that this worked before this morning. It's like it is always detecting the headphones and therefore mutes the rears.

Additional information.
I also have to set: "Separate all input jacks as independent input devices" in the MSI Audio Manager (Device advanced settings) in order to get my microphone to work too.
What the heck happended? What's wrong?
MSI, got any ideas?

Just upgraded my 2014 iMac to yosemite. Now my Bose sound link won't work. The bluetooth is connected and it beeps as normal, just no sound comes from the speaker. This is very frustrating (along with the now flat rather than 3D icons on the desktop)

I have just upgraded my 2014 iMac to YOSEMITE. Now my Bose Soundlink bluetooth speaker connects, beeps as normal, but produces no sound from the Bose speaker whatsoever. HELP PLEASE

I have now recently downloaded 10.0.2 which is confusing in itself, as, as far as I can ascertain that is actually version 11, but I'm not even sure about that.
Version 10.0.2 is the newest version and the successor to GarageBand '11 (version 6.0.5).
The '11 is referring to the iLife '11 suit of multimedia application - the older GarageBand was a part of this bundle.
Have a look at Edgar's graphical enhanced manuals, the explain very detailed how things work and why. You can buy them as iBooks from the iBook store or directly from the page:
http://DingDingMusic.com/Manuals/

Still no sound from front speaker

hey there
I have an intel HDA audio with the realtek ALC883 chip installed, running on the snd_hda_intel kernel module (2.6.22). Now, sound works *great* coming out of the headphone jack, but I cannot get anything coming out of the built in, 'external' speakers. I know they work, because I heard them work in vista the 1st time i booted the laptop.
I tried many different 'options' combitations to the module, and none work. I also get an annoying, odd pop and crackle sound a few moments after I boot up (and I say moments because there doesnt seem to be any rhyme or reason to when it does it).
I tried disabling all power saving modes; and I have also noticed the 'speaker' volume is always set to 0 after I boot up, no matter what it was previous to that.
I have been able to go around this problem using headphones and really i guess its fine but its been kinda buggin me, cause you know, you want everything to work right ?
btw, in dmesg i noticed an odd message that says:
hda_codec: Unknown model for ALC883, trying auto-probe from BIOS...
could that be the reasons for all my troubles ? remember, headphone jack works like a charm.
thanks

May I ask what desktop you're using? In XFCE my integrated Intel HDA soundcard doesn't show up in the mixer whatever I do. The driver is working though, because this is the output of cat:
[kimolee@kimtjik ~]$ cat /proc/asound/cards
0 [NVidia ]: HDA-Intel - HDA NVidia
HDA NVidia at 0xfe020000 irq 19
1 [CMI8738MC6 ]: CMI8738-MC6 - C-Media PCI CMI8738-MC6
C-Media PCI CMI8738-MC6 (model 55) at 0x9c00, irq 20
What do you see when running the same command?
Anyhow if I then run "alsamixer -c 0" the Intel HDA sound-device shows up perfectly well, but it's by default always set to 0 output from all channels. Test and report whether your scenario is similar to mine (gnome mixer doesn't suffer from the same oddity as XFCE's).

IPT4 doesnt play through INTEMPO dock while an old ipod does. sound comes from ipod speaker only. why not thru dock speakers?

My old iPod works fine in an INTEMPO dock. My new iPod touch 4 will only play in the dock thru its own speaker and there is also a 'not charging' message.
Is the dock not up to handling my iPod Touch4?

Two possible reasons:
- The configuration of the 4G iPod prevents the iPod from fully seating in some older docks, those not deisgned for ohe 4G.
- Some docks are not compatible with the later iOSs
Have you went to the manufacturer's support site?

Audigy 4 rear audio comes from front speake

Similar Messages

Maybe you are looking for