Audigy 4 remote control prob

just recently switched pcs and i have lost my driver disc for my audigy 4 soundcard. i downloaded the driver off the creative site, but i can't get the remote control to work. anyone know of where i can get the drivers?

Suggest you try this: http://melloware.com/products/intelliremote/
Great little app, enables Creative remotes without needing the Creative drivers, and also works way better than Creative's junk remote software. It's shareware, but well worth the donation IMHO.

Similar Messages

Sound blaster Audigy Remote Control / Remote Center in Windows 7

@Hey Folks,
I have an Audigy Platinum with a remote control and version .46 of the Remote Center software.
Remote center has extremely limited functioning under windows 7 - I can eject the CD player, turn on/off clock
display, everything else either displays N/A in the overlay or gets no response (hitting the remote 'start' button for instance).
Is there a newer version of Remote Center that may have more functionality in Windows 7? I know of commercial software but I'd prefer a solution via creative labs or free and open source software if available. I have searched for newer versions of Remote Center but seem to be stuck with the version that came on my CD. Any suggestions?
thanks,
jd

zac,You need to get the Vista apps for your X-fi. Either pull the ISO files off torrent or one of the other sites or pay the $7.00 shipping fee for the CD from Creative. Install the entertainment center off the CD and you'll have remote control functionality. Steve

Zen Micro Wired Remote Control Prob

Anybody having problems with their supplied zen micro wired remote control?
Mine seems to be having a connection problem with the player, slight movements will cause breakages in the music, left earphones will cease playing out.
Seems that some people are having problems with zen micro's earphone jacks, however, using the supplied the earphones(minus the wired remote control) works well.

hmm, I had same problem with 2 days- was definetly a loose connection in the wiring of the remote plug, as has been no problem with other headpohnes, and is not the 'heasdphone jack' issue (yet! thank god!)
took 3 weeks to get replacement remote from creative (only returned remote, not Zen, luckily) have not really messed around with the replacement yet, but looks ok.... am really hoping so cos it is really useful for going mountain biking with the zen nice & secure in my backpack....

I don't know how to USE my remote control on my AUDIGY 2 ZS Platinum

I followed the instructions on this page: http://support.creative.com/kb/showa....aspx?sid=2965
about activating my remote control for my AUDIGY 2 ZS Platinum but mediasource did not have a remote control option tab as you can see here...
Untitled.jpg
I just changed the battery on my remote and the receiver blinks when I press a button on the remote but nothing happen no volume change or nothing.
Don't know what else I should do.

You can import the contacts from SIM.
It is covered in the manual:
iPhone User Guide (For iOS 4.2 and 4.3 Software)

Audigy 2 ZS Platinum - Remote Control not work

hello all.. Sorry for beating a dead horse. My installation on a P4 3.0 ghz machine of the Audigy 2 was flawless. All hardware diagnostics that have been run have been successful. Everything works. I updated all drivers. Everything is functional on the unit.....but...the remote control doesn't work.
When I got to setup the remote control and it asks to select a transmitter (rm-500) from a drop down list, it shows rm-500. but it the drop down list for the receiver is BLANK? I've tried several suggestions from the forum but it still doesn't work.
Have I missed something or is it quite possibly just a dud unit that I have to take back.
thanks for all suggestions and ideas...
sony

OK, let's see, you have a device that is still under warranty. You properly installed said device. You put batteries in the remote but it does not work no matter what you try. It seems to me that you have only one option and you mentioned it in the penultimate sentence in your post.
Hope it's not a long dri've.:smileyvery-happy:
Richard
Message Edited by sf3454 on 03-3-2005 03:28 AM

Audigy 2 NX Remote Control Issues

I am unable to use the remote control bundled with the Audigy 2 NX for anything but (un)muting and changing the volume. Obviously the remote is sending the signal and the box is receiving it. I've installed the latest version of Creative MediaSource 3 and the remote control manager:
CMS_PCAPP_LB_3_30_2.exe
CMS_RMT_PCAPP_LB_2_30_02.exe
I have made sure that "Enable Creative MediaSource Remote Control" is enabled and that I have selected the proper remote model, "Creative RM-500," in the Remote Control & OSD Settings menu. Howerver, under "Select this as the remote control receiver:" there are no devices available. Yet the Audigy 2 NX is plugged in and functioning. It shows up as my acti've sound output device and I am able to play sound through it.
Any suggestions
I'm running Window's Vista 32bit with 4 GB of RAM and an Intel Core2 Duo T9400 at 2.53GHz.
Thanks!

I have a small problem of my own.
I have a setup like Laptop---> Audigy 2NX -----> Analog 7. spkr system on Windows Vista 32 bit.
I am having a hell of a time in getting the SPDIF to work.
Do you know how to get sound from the SPDIF?
I thought the new drivers I installed? would solve the problem. But with them, the SPDIF I/O controls are greyed out and there is no sound through the speakers when I set SPDIF as default speakers.
Hi ppkumar,
So do you mean that when you set SPDIF as default speakers, you do not get any sound through the analog 7. speakers system that is connected to the Audigy 2 NX? Is there any sound from the SPDIF? When default is set to SPEAKERS instead of SPDIF, does your analog 7. speakers work correctly?
If you get sound from your SPDIF but not your analog 7. speakers when default is set to SPDIF, and sound from your analog 7. speakers but not the spdif when SPEAKER is default, then I would think the Audigy 2 NX is behaving correctly since that would be what I would expect.

AUDIGY 2 ZS x REMOTE CONTROL

Hi all.
A simple question: Is it possible to mak an AUDIGY 2 ZS? work with? the remote control and USB receiver that cames with
Sound Blaster Audigy 4. Thank you

OK, let's see, you have a device that is still under warranty. You properly installed said device. You put batteries in the remote but it does not work no matter what you try. It seems to me that you have only one option and you mentioned it in the penultimate sentence in your post.
Hope it's not a long dri've.:smileyvery-happy:
Richard
Message Edited by sf3454 on 03-3-2005 03:28 AM

Audigy Sound Blaster and Remotely controlled speake

I own Sound Blaster Audigy card and I would like to purchase set of Dolby surround speakers that would work flawlessly with that card. I am thinking to buy Creative speakers since they also make this card, but I need a set that could be remotely controlled, either through wire or wirelessly. Anyone out there with this older model of Audigy that has surround speakers connected to it which can be remotely controlled? Any suggestions? I wrote an email with my question to Creative sales, but nobody responded yet.
Thank you,

If it is the very first Audigy model (Audigy ) then it a 5. soundcard. So any 5. speaker system or below would work nati'vely with your soundcard. If you choose a 6. or 7. system they usually have an upmix function to make 5. sounds play over all satellites.
Also, most speaker sets (regardless of manufacturer) uses some kind of remote control (either through cable or IR).
Your question is extremely hard to answer if you are looking for tips on which speaker set to buy, but easy to answer if we take the question "Anyone out there with this older model of Audigy that has surround speakers connected to it which can be remotely controlled?" at face value as everyone with any kind of speakers should have some kind of control pod or IR remote control to their speakers.
Edit: I will try to answer your question: you can choose whatever speaker set you want as I think it is safe to say they all got either a cable remote control or an IR remote. The question then becomes what exactly you are looking for and in what price range.
Message Edited by rico0 on 07-23-2005 08:43 PM

SB Audigy 2 Platinum Remote Control Problem, Need THis Resolved quic

Hi
this is a Known issue to Symantec Support, I really really want to be able to use my Audigy 2 Remote Control with this Soundcard, but I can't, until Symantec or YOUR SLOW AS MOLASSES COMPANY UPDATES MEDIASOURCE SOFTWARE SO THESE 2 PROGRAMS DON"T CONFLICT, WITH REMOTE CENTER LOADING ON STARTUP, IT WILL NOT LOAD AUTOPROTECT FOR NORTON ANTIVIRUS 2005
FIX THIS, and quickly, is all I have to say
Or let use SB Audigy 2 Platinum Users download the newest versions of the software
Message Edited by bikeman on 0-22-2004 03:34 AM

Hi
I don't have that file on startup--SBDrvdet, All I have is Creative DVD Audio Driver Detector, CTHelper, and RCman, which is disabled so Norton's Autoprotect will work ok.
Thanks for the reply though
Here is Symantecs workaround, I guess I can li've with these, but if Norton's Autoprotect winds up disabling by this workaround, and I happen to get a trojan or virus in..then I won't be very happy
To stop Creative MediaSource Go! from running when the computer starts
On the Windows taskbar, click Start >Programs >Creative >Creative MediaSource Go!, and then click Creative MediaSource Go!</LI>
Right-click anywhere on Creative MediaSource Go!</LI>
In the new window that appears, click Close. This prevents the program from loading when the computer starts.</LI>
Do one of the following:
If you also have Creative RemoteCenter, then go on to "To stop Creative RemoteCenter from running when the computer starts."</LI>
If you do not have Creative RemoteCenter, then restart the computer and go to the next step.</LI>
</LI>
After the computer starts and Norton AntiVirus runs without a problem, then re-enable Creative MediaSource Go!</LI>
To stop Creative RemoteCenter from running when the computer starts
Do one of the following:
In Windows XP, on the taskbar, click Start >Control Panel >Remote Control Center.</LI>
In Windows 2000, on the taskbar, click Start >Settings >Control Panel >Remote Control Center.</LI>
</LI>
Uncheck Enable RemoteCenter.</LI>
Uncheck Show RemoteCenter icon on taskbar.</LI>
Uncheck Show RemoteCenter splash screen when RemoteCenter is started.</LI>
Restart the computer.</LI>
After the computer starts and Norton AntiVirus runs without a problem, then re-enable RemoteCenter. To re-enable RemoteCenter, repeat steps through 5, this time checking each entry.You must repeat these steps whenever you start the computer.</LI>
After Disabling Creative DVD Audio Detector, I reenabled the Remote Control and restarted, and so far so good last 2 days without a conflict With Norton Antivirus, if it really does solve the problem, I will email Symantec Support and let them know the solution, so they can inform other users with the same problem, since obviously creative doesn't want to assist them in finding the problem or provide help fixing it. So far Remote Control hasn't been an issue, but I'm gonna wait til end of month to send off an email to Symantec to make sure it's actually fixed. Since if it doesn't drop out of me by then, then I know it's fixed, since was only in 2 weeks before it got the internal program error before.
Message Edited by bikeman on 0-25-200404:47 AM
Message Edited by bikeman on 0-25-2004 04:47 AM
Message Edited by bikeman on 0-29-2004 04:08 AM

AUDIGY 2 PLATINUM REMOTE CONTROL SSOFTWARE QUESTION.......

:. I HAVE INSTALLED AUDIGY 2 PLATINUM'S SOUND DRIVERS BUT I DON'T HAVE THE SOFTWARE TO SET UP THE REMOTE CONTROL, WOULD ANYBODY HAVE ONE OF THESE CARDS? AND IF SO WHAT SOFTWARE DO I NEED TO DOWNLOAD A SUITABLE COPY OF THE SOFTWARE NEEDED SO I CAN USE THE REMOTE. ANY HELP WOULD BE GRATEFULLY APPRECIATED. THANKS.

:. I HAVE INSTALLED AUDIGY 2 PLATINUM'S SOUND DRIVERS BUT I DON'T HAVE THE SOFTWARE TO SET UP THE REMOTE CONTROL, WOULD ANYBODY HAVE ONE OF THESE CARDS? AND IF SO WHAT SOFTWARE DO I NEED TO DOWNLOAD A SUITABLE COPY OF THE SOFTWARE NEEDED SO I CAN USE THE REMOTE. ANY HELP WOULD BE GRATEFULLY APPRECIATED. THANKS.

Audigy 2 ZS Remote control (RM-1500) and DVD-player. (Need he

I've got Audigy 2 ZS platinum with remote RM-500, but software included in package allows to play only DVD-audio. Creative recomend to install InterVideo DVD 5 to play video DVD with Creative Audio-DVD program.
I've got InterVideo DVD 6 Platinum, but it doesn't controlled by RM-500 (there is no problems with my logitech Cordless keyboard with media buttons). As I found out there is differens in buttons menu: Creative use Enter for play, Spase bar for Pause, ect., but standart windows programs use Ctr+P and Ctr+Shift+P.
Does Creative have patch that solve this problem. To have remote that cann't contol DVD player (exept Audio DVD) is useless stuff.

Skeleton,
Have you added the DVD player software to the external applications listing under the remote control tab in MediaSource settings. The controls on the remote are mapped to the keys as defined by Microsoft. If the program is compliant to this then it should work.
Jeremy

Remote Control and MediaSourc

I hava an Audigy 2 ZS Platinum Pro. I formated my HD last night and reinstalled XP. I then installed the new drivers and Media Source 5 and new DTS Neo plugin. But when I tried to install the old Remote Control plugin, it didn't work, it said I don't have a new Media Source. I couldn't find a new version of the plugin (compatible with media source 5), so, how am I supposed to make remote control work?ThxClaudio Lima[url=mailto:[email protected]">[email protected][/url]?

It is a known issue that the remote does not work in MediaSource 5.
See this thread....
http://forums.creative.com/creativelabs/board/message?board.id=soundblaster&message.id=85763
You only alternati'ves are to:
. Go back to MediaSource 3.
2. Find alternati've Remote control software solutions that work regardless of the version of MediaSource. There are many alternati'ves if you search these forums.
Hope that helps!

Remote Control only works with Battery Cover

Hello.
I previously thought that my remote control for the Audigy 2 ZS Platinum did not work at all even after I went through the process of a clean hardware and software install.
I had noticed from the first time that I placed the remote on my desk that the battery compartment rattled but thought little of it until I could not get the remote control to function and began the troubleshooting process.
After replacing the battery with a fresh one, and the remote still not functioning, I decided to simply place the battery in the remote without the cover and voila, the remote began to work. I also tested it with the original battery that it shipped with, to be thorough, and discovered that it also worked. It appears that the cover prevents contact between the battery and the terminal inside the remote.
I hope this process helps another user and would like to know Creative's take on this situation and whether or not I can do a simple replacement via their warranty or if I have to send the remote in at cost to me for two weeks of testing first.

They should be able to just send a replacement, it sounds like that one is faulty alright.
The contact details for Customer Support (in the different regions) are:
Americas Customer Support
European Customer Support
Asia Customer Support
Cat

Lenovo AIO C440 - not working infrared remote control

Hello,
is there any hint how to get infrared remote control working for a new C440 model? Tomorrow I will try to measure and/or replace batteries which could be bad. For now it is totally not working.
Another question: the remote should work only within AverMedia TV app or in the whole Windows 8?
Regards,
Zdenek

hi bohdik,
Welcome to the Lenovo Forums.
The IR Windows Media Center remote control is for use with C440 models with optional TV tuner. If you have this model, make sure the TV Tuner driver and the ITE CIR Driver from the lenovo support site are installed under Device Manager (press Windows Key+R then type devmgmt.msc) then follow the Set up a TV signal in Windows Media Center. guide.
Note:
You must have Windows 8 PRO to enable Windows Media Center
See this articles in reference:
How to add Windows Media Center to Windows 8 Pro
How To Install And Set Up Media Center On Windows 8
Hope this helps
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Remote Control and Remote View Problem

Hi,
I work at a High School running Netware 6.0 SP5 and Zen works 4.01 ir7.
Remote Control and Remote View works great but I noticed one problem.
We have a logo of the school that is forced down on to the desktop when a
user logs in through group policies. This logo works perfect for the
desktop wall paper and loads every time a user logs in.
When I Remote Control or Remote View a computer the users desktop wall
paper turns from the logo being forced down through group policies to the
desktop to a blue desktop wall paper.
I would prefer the desktop wall paper staying the schools logo when I
Remote Control or Remote View because if the desktop wall paper changes to
the blue color I mentioned above when I Remote Control or Remote View the
users computer, they will know that someone is taking over their computer
which sometimes we dont want them knowing.
We have Windows 98SE computer running Novell Client 3.4 and we have some
computers running Windows XP Professional SP1 and Windows XP Professional
SP2 both running Novell Client 4.91 SP2.
The Remote Control and Remote View problem of the desktop wall paper
changing on the users computer occurs on all operating systems mentioned
above.
Is there a solution to my above problem? When Remote Controlling and
Remote Viewing someone's computer I don't want the desktop wall paper to
change.
Thanks!

Bpilon,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Do a search of our knowledgebase at http://support.novell.com/search/kb_index.jsp
- Check all of the other support tools and options available at
http://support.novell.com.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://support.novell.com/forums)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://support.novell.com/forums/faq_general.html
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://support.novell.com/forums/

Audigy 4 remote control prob

Similar Messages

Maybe you are looking for