Audigy 4 Sound

I am having a problem with my sound. I have a Sound Blaster Audgy 4 and I have a low volume problem. I am running Windows XP. I checked slider tabs and they appear to be all the way up. Is there something I missed? I appreciate any help.

These JBL speakers you mentioned, please make sure you have speakers that connect to a power source, and have a built in amplifier to amplify the signal that the sound card sends it. If the speakers do not have an amplifier, you may get very low sounds or no sound at all (because the signal is too weak).
You can try swapping your Creative Sound Blaster speakers 7. to see if you are getting a reasonable volume. That should tell you if the Audigy 4 is working properly or if it's something to do with the JBL speakers.
I can't call you but if you wish to speak to our customer support, you can <a rel="nofollow" href="http://support.creative.com/contact/emailform.aspx]write to them[/url].

Similar Messages

Audigy 2 sound card drivers for windows 7

hello,
Audigy 2 sound card drivers for windows 7.
I bought the card from a friend no longer used. funtion perfectly on Win XP, but I have a system equipped to win 7 / 32 bit. unable to install a driver to work, the soundcard is recognized, but the properties says "This device can not start. (Code 10)". All software is installed. But I think the driver is the problem, I downloaded the package from the site, they also have a software autoupdate, but everything ends with error.
SB0240 Audigy2
Some help pls.

back,
my operating sistem seems to be the problem.
i instaled a new clean win 7/64 and the driver is ok.
now, my currently operating sistem works verry fine and i don't want to format.
i have many software programs instaled in a period time and it took me some time to instaled again.
what sollution is in this moment?
my sistem (win ultimate 7/32 actualy) is daily updated.
is there any possibility to remove all audio drivers, including montherboard and audigy and reinstal all?
thank you.

Playing gta san andreas with audigy ls sound c

Have Anyone Else Had Problems Playing Gta San Andreas While Using Audigy Ls Sound Card (Problems Like Music But No Sound Effects)?
I Did But I Installed My Old Sound Blaster Li've 5. Digital Sound Card And I No Longer Have That Problem.

I'm still using a soundblaster and I find the game crashing completely and locking up my computer.

Audigy 2 sound card problems

I am hoping that someone out there can help me in a crucial situation.
I am using an Audigy 2 sound card with creative 5. speakers.
I also use Adobe Audition to edit, record sessions for my voice-over jobs.
Recently, I attempted to hook up a web cam so that I could see my grand daughter on the west coast.
After hooking up the web cam, I noticed my home studio environment changed drastically. I began having trouble with recording using my microphone through my Macki mixer. I began hearing a continuous hiss that I had never experienced before.
In fact after uninstalling the web cam, and restarting my computer, I got that horrible blue screen on my computer indicating the world was about to end! Smile
Long story short, I was able to finally get my computer back up, but I continue to experience problems recording "clean' audio".
Three things, after reinstalling Creative from disc several times and restarting my computer I receive a window stating Creative Media Source Detector.....Unable to load needed components....Please reinstall the application"
Also, when trying to test my sound hardware I get a message stating...Direct play voice setup..."an error occurred during direct play voice setup....error code 0x80004005
Last but not least I cannot access the "Creative diagnostic feature on my computer. I only get a small window for this feature that will not open up fully and allow me to run a diagnostic test!
I know this is a lot to absorb, but I cannot get anyone from Creative to address my problems because I am out of warranty and therefore not getting any love from this company.
Need your advice and or guidance on this.
Please respond when time allows.
Vopro

Re: Audigy 2 sound card problems? use add/remove programs and remove all creative software and drivers, then do the same for your web cam and unplug it
restart your pc
download and install [url="http://downloads.guru3d.com/Guru3D---Driver-Sweeper-%28Setup%29-download-655.html" rel="nofollow">driver sweeper[/url] and use it to clean up any left over creative bits and bobs and restart your pc when it asks you to
now download and install the [url="http://support.creative.com/Products/product_list.aspx?catID=&CatName=Sound+Blaster" rel="nofollow">latest audigy drivers[/url]
once your back in to windows try recording something and see if everything's back to normal
now reinstalling your web cam but don't reinstall using the cd that came with it
find the manufacturer's website and get the latest drivers
install cd's best avoided simply because the software and drivers they contain are typically the initial release versions, and so potentially very old
and i think we can all agree that old, buggy drivers can be a real pain

Problems with Audigy 4 sound c

Ok, well I bought a new Gateway computer (FX400) speced with the audigy 4 sound card. Well I got it all set up, I ran a DVD and it ran beautifully, but then I noticed that when some system sound occured I got some of this wierd feeback, I also noticed it while using my mic, and I also noticed it while I was gaming on World of Warcraft, and Counter-Strike Source. First I tried downloading the updates for the card, no change. I then called Gateway, and they concluded that the card must be bad, well they came and installed a new one and the same problems occured. I was wondering if anyone else was having the problem I am having, and if there is anyway I can fix it with some sort of patch.
Thank for any support anyone can give me.

I just got a FX400XL from gateway with the audigy 4 sound card and the logitech z 5300 5. speakers and i get the popping/crackling noise in my speakers. It actually sounds more like a spark noise like if?you touch two li've wires together. So i?tried switching the speakers....that didn't work,?I hear it on the logitech speakers as well as the factory speakers and in headphones.
I tried switching the slot the card is in on the motherboard....that didn't work. I've installed?every driver for it possible....that didn't work.
I've tried changing power strips and moving the speakers further away from the tower and turning off my cell?phone......doesn't work. Gateway even replaced the soundcard....didn't work. Are?you seeing the trend here.
I notice that?I hear the noise when?I play F.E.A.R., when?I play streaming internet audio and video, flash videos and with certain programs like aim triton when some one signs on or off or when?I send an instant message it makes the sound. Its getting really annoying and I've read all the posts on possible solutions and what not.
I wish someone from creative would at least acknowledge that most of us here are suffering from this issue and?to assure us that their company is taking the proper steps to remedy this obvious product malfunction. Granted no product is perfect but if creative is a company?that advertises?the quality and care of their merchandise i would at least expect to them to recognize these issues and manage them with the quality and care that they so pride themselves in having. Failure to do so would only represent false advertising on the company's behalf.

Creative Sound Blaster Audigy SE Sound Card

<a title="Creative Sound Blaster" rel="nofollow" href="http://alatest.com/user-reviews/sound-card-reviews/creative-labs-creative-sound-blaster-audigy-se-sound-card-30sb057000004/pu3-435652,93/"]http://alatest.com/user-reviews/sound-card-reviews/creative-labs-creative-sound-blaster-audigy-se-sound-card-30sb057000004/pu3-435652,93/[/url]
I can not find this product drivers. I am only moved to windows 7 user.
So leaders of the drivers who agreed to Windows 7 (32 biittinen)
Leaders of the instructions, which I could find the appropriate drivers for this card.Guidance, I would ask
I hope that you understood what I meant.

Indeed, I came here today forum.My had great difficulty finding drivers for Windows 7 os .Just ?this image is similar to the card, I should find enabled. I just need the drivers. It would be really cool if you could advise or guide me directly to the link, which I? my computer drivers. I have a really bad English. I hope ?that you understand what I mean. Thank you in advance

I have some Audigy card Sound Blaster Audigy SB1394 EAX ADVANCED HD maybe can

I have some Audigy card Sound Blaster Audigy SB394 EAX ADVANCED HD maybe can i get some info about this card.. it is 5./6. some details about it. i found it in my closed :P
it will be great if someone help me about this card. because i have my SB li've Value if this audigy better i'l just change it.

i think it is an Creative Labs SoundBlaster Audigy with 394 PCI Sound Card
32-Bit Professional Quality Effects Engine
? Creative's Audigy? patented effects processor
? Support for real-time digital effects like reverb, chorus, normalizer, pitch shifter, or distortion across any audio source
? Capable of processing, mixing and positioning audio streams using up to 3 available hardware channels
? Full 32-bit digital mixer maintains all sound mixing in the digital domain, eliminating noise from the signal
High Definition Audio Quality
? Playback of 64 audio channels, each with its own independent sample rate
? 24-bit Analog-to-Digital and Digital-to-Analog conversion
? 6-bit recording with sampling rates of 8, .025, 6, 22.05, 24, 32, 44. and 48kHz
? Supports Sony/Philips Digital Interface (SPDIF) input and output of up to 24-bit/96kHz quality
? SPDIF output up to 24-bit resolution at selectable sampling rate of 44., 48 or 96kHz
? Low latency multi-track recording with ASIO? support
EAX?ADVANCED HD?, Advanced Audio and 3D Audio Technology
? Optimized user-selectable settings for headphones, two, four or six speakers and external A/V amplifiers
? Dolby? Digital audio decoding to 5. speaker channels in both analog and digital modes
? Upgradeable 3D audio architecture for future improvements
? Hardware acceleration of EAX ADVANCED HD for games
? Creative Multi Speaker Surround? (CMSS) technology places any mono or stereo source in a 360? audio space
? User-selectable EAX ADVANCED HD music presets, pre-configurable DSP modes simulating various acoustic environments
? Time-scaling
? Audio Clean-Up
SB394 Connectivity
? High speed connection to IEEE? 394-enabled devices with up to 400Mbps transfer rate
? Interconnection of up to 63 devices for peer-to-peer communication
? SB394 Certification Program thoroughly tests and certifies participating vendors' 394-enabled devices with Sound Blaster Audigy for optimal performance and ease of use
? Hot-plug support for ease of connecting or disconnecting external devices
Realistic Wave-Table Synthesis
? Creative's Audigy music synthesis engine
? 64-voice hardware polyphony with Creative's patented 8-point interpolation technology that reduces distortion to inaudible levels
? Uses SoundFont? technology for user-definable wave-table sample sets
? Unlimited sample size can be loaded into host memory for professional music reproduction (limited to available system memory size)
? Scalable PCI wave-table synthesis architecture with multi-timbre capability
? 48 MIDI channels with 28 GM & GS compatible instruments and 0 drum kits
MIDI Interface/Joystick Port
? Support for analog and digital or DirectInput? game devices
? Support for two simultaneous MIDI devices with Sound Blaster Audigy Dri've
On-Board Connectors
? Analog / Digital Out (Analog Center & Subwoofer / 6-channel SPDIF Output)
? Line in
? Microphone in
? Line level out (Front) / Headphone out
? Line level out (Rear)
? SB394 port
? Telephone Answering Device in
? Analog CD Audio in
? Digital CD Audio in
? Expansion header to an external 5-pin Joystick / MIDI port
? Internal SB394 header to Sound Blaster Audigy Dri've
? Expansion header to the Sound Blaster Audigy Dri've
Sound Blaster Audigy Audio Performance
? Signal-to-Noise Ratio (A-Weighted) = 00dB
? Crosstalk (Left/Right and vice versa) = -00dB
? Total Harmonic Distortion + Noise at kHz (A-Weighted) = 0.004 %
? Frequency Response at -3 dBr = <0 Hz to 22 kHz

[Soundblaster Audigy 2ZS] Sound cutting out in middle of gamepl

I have Vista, and I never had this problem with XP.
I downloaded the Vista drivers and have ran Windows Update for all the missing drivers.
When I run dxdiag.exe
I go to the sound tabs and find this.
The file ctaud2k.sys is not digitally signed, which means that it has not been tested by Microsoft's Windows Hardware Quality Labs (WHQL). You may be able to get a WHQL logo'd driver from the hardware manufacturer.
For Sound
and Sound 2
Sound 3 says everythign is fine.

I've found that Audigy series cards "cut out" if you alter speaker properties in Vista Control Panel.
Creative umm... bug I think that's what they call it...
For example
I find 6bit, 48000 Hz (DVD Quality) is the highest quality I can set.
I've seen it on Audigy 2, Audigy 2ZS and Audigy 4. Win32 and Win 64.
Is your adapter set to studio quality If so - that's most probably it.
Hope this helps.

Audigy, no sound after rest

I recently formatted my hard dri've. After I finished installing Windows XP, I got my Sound Blaster Audigy, DR release 2.2. driver from this website. Except whenever I restart my computer, the sound doesn't work and I have to reinstall the driver to get it to work again! My computer doesn't mention any problems with the soundcard or the drivers and the only solution I've found is to reinstall the driver. Any tips? I'd really hate to go through this process every time I turn on my computer. Thanks!

bump!

Gigabyte EP45-UD3P Audigy No Sound in Windows 7 (64-bit)

Hi,
I just installed windows 7 64bit. I have a sound blaster audigy as installed the latest drivers from creative (SBAX_PCDRV_LB_2_8_00.exe). I get no sound out of the card at all. Device manager shows the device is working correctly. I have also picked it as the default in the sound settings. No sound at all.
Running a Gigabyte EP45-UD3P wtih 8gigs of ram. This board has onboard audio which I disabled via the bios. Still got no sound from the audigy.

Wow, that fixed? my problem also by disabling soundblaster enhancements. How were you able to figure that one out? I was trying to figure it'sout also many months ago when I first got windows 7 beta and couldn't do it. Anyway,
Seems like most people don't like this start navigation sound, but I do.
I don't like the fact of having to disable soundblaster enhancements also.
Have you noticed that if you change the windows theme to something else it will actually work?

Updated Audigy 2 Sound Card Drivers.... now speakers don't mu

I have a Sound Blaster Audigy 2. I updated the drivers for the first time in 3 years yesterday. I'm now using the Driver set: 5.2.4.96.
However, the bad news is that when I plug in my headphones to the USB port, the sounds still comes over the speakers and not over the headphones. The microphone works and I can hear my friends on ventrilo. But games sounds come through the speakers. I checked my settings in the Audio HQ and 'mute speakers when using headphones' is checked. Also, in order for my headset to work at all with ventrilo, I had to default sound device to my headphones and not to the sound card.
Prior to the new drivers, everything worked perfectly. After the drivers install, I'm having problems. Any thoughts as to what is going on?
Thanks.Message Edited by boojiboy on 04-6-200703:43 PM

Last try... bump #3. One additional piece of info, after working on and off on this for over a week, I'm suspicious that the previous driver set didn't not complete uninstall and thus, I have some sort of of driver conflict. I've followed the FAQs to the letter on uninstall and reinstall procedures. No luck.

SB Audigy 2 sound loop crashing ga

Hi i just recently purchased SB audigy 2zs from a local best buy. AFter uninstalling all my old sound drivers, i popped this baby in. Installed all the drivers, including EAX 4 and all the other goodies that came with the CD. I started to load up a game, and it would play for a little while (under 5 minutes) then have a quick sound loop and boot me to the desktop. I just thought it was some flaw, then i tried to reload the game, and load it up, and same thing happens, i change the Dxdiag sound to normal acceleration and it still has the same problems.
my Computer is using
Windows Xp professional
Service pack 2
Im on a Pentium 4 3.0ghz Northwood 800mhz FSB HT TechnologyIntel 865 PERL(K) motherboard2 52 meg Corsair XMS ddr400 pc3200 ram (platinum heat spreaders)60 Gig 7200 rpm SATA Seagate250 Gig 7200 rpm Maxxtor20 Gig 7200 rpm WD SE28mg ATI RAEDON 9800 PROSoudblaster audigy 2zs 48x2x48 Liteon cdrw6x Pioneer dvdKlipsch 5. promedia250meg external Zip7" Samsung LCD 72xLogitech Mx500 mouseSteelpad 4s MousepadLogitech Elite Keyboard BlackPlantronics Audio 90
I just checked the sound tab on dxdiag and it said this.
The file ctaud2k.sys is not digitally signed, which means that it has not been tested by Microsoft's Windows Hardware Quality Labs (WHQL). You may be able to get a WHQL logo'd driver from the hardware manufacturer.
Is there any way to make it digitally signed?

If you appied the driver updates (or if you didn't, you should! They fix stuff.), sometimes the installer installs the driver files but they don't get registered properly. You can check if this happend by going into Device Manager and clicking the properties/driver tab and seeing what it is labeled. You might have a label of the 402's that used to be signed before you ran the driver update installer but now are no longer! and, if you look at the list of files below that you may find all 444 drivers, most of which do not have the signed icon to their left.
If this happened to you, simply use WinZip or WinRar to extract the downloaded driver update to a folder and locate the CTZAPP.EXE file in the driver folder. Run it, and place a check in the box the tells it to overwrite previously installed driver files and shared files. Say yes when you run it and it asks you if you really want to do that. Reboot when done. When you go back to check, your drivers will be all signed and the 444 (and signed) label will be there.
Unfortunatly, this stuff happens even if you correctly disable the virus scanner before performing the operations. But, worse happens if you leave stuff running, so yeah, make sure you close your programs in the taskbar and the virus scanners before installing software.Message Edited by Eck on -8-2004 06:0 AM

Audigy Platinum: Sound distor

I'm using following configuration:Roland VS-880 EX harddisk recorderAudigy Platinum EX, external break-out box. I recorded music on the Roland and when listening to it via headphone it sounds great.When I connect the Roland to an external amplifier it also sounds great.Now I connect the master output bus of the Roland to the Aux2 input of the Audigy card.When listening on the headphone connected to the break-out box it sounds great. Now when I turn up the external Creative speakerset that same sound is distorted.As if there is a kind of metallic rattling going on. I have never had this problem before, but it is very disturbing since it is impossible to produce a well sounding CD. I hope anyone has an idea or solution?Thanks,Gerard

It sounds like you might have an Audigy digital output connected to an analog speaker input. That will sound a lot like (loud, unless you turn the volume down) "white noise" hiss. What are you using for speakers and how exactly do you have all this connected.
-Dave
[email protected]

Audigy z2 sound blaster with cubase sx2?????? my soundblaster has an error

Hi:
I try to use the audigy soundblaster Z2 with Cubase SX2 in one audio track mode it records perfectly but when i want to record a new track, the audio signal of the other tracks get recorded into my new track!!!i I have tried to change prefrences and comands of the sound system but nothing happens how can i solve this??

In creative mixer select "Analog Mix" as your record source. Then go to Cubase and in Devices?Vst Inputs and select Analog Mix as your input bus (stereo). Insert an audio track in your cubase project an select that input to record all your audio. If you want to record soundfonts to audio (because when you export your mixdown they will not be in the mix) you must add another input bus in Vst inputs. Go to Devices?Vst inputs again and add Mix as your second input bus (stereo). You will have now two available (Analog Mix for your recordings and Mix for record sondfounts to audio). So, if you have a midi track with a soundfont recorded and you want that to audio, you must add an audio track, select Mix as input on that audio track, solo both midi and audio track select the audio track to record and finally hit the record button.

Sound blaster audigy nx sound probl

i seem to have had a few minor problems with this sound card this past few months is the sound crackles sometimes after a sound has finished the other is the update wont install on from the creative website any ideas would be great AUDX_WEBUP_LA__00_000.exe thats the update i get which is over 2mb but when it comes to installing it just fails so if anyone knows how to fix this problem i have reinstalled my pc before but my pc has been ok since then as for the crackling well i dunno where this has come from i it might be the sound card in the pc but this pc is new so i dunno or it could be the audigy nx itself help me guys and girls

Yunior,
I think that you are saying that sound is speeded up when you watch movies. If that is so, is there a time scaling option (such as in EAX Console or MediaSource organizer) in the software you use for this? And what software are you using for watching movies? Also, if you have not already, try disabling your onboard soundcard in BIOS.
Zmartwiony je?li JA jestem przest?pstwo , opr?cz czy m?wisz po Polski?JA jestem inaczej bieg?y w czym? ono, opr?cz JA wola pr?bowa?. Oko?o tw?j Rewizja NX, Zdaje mi sie jeste? powiedzenie ?w zdrowy jest regulowa? szybko? w g?rze podczas ty pilnowa? kino. Je?li czyli prawdziwy , czy jest czas skalowanie wyb?r (taki jak tu jest w ten EAX Konsole albo MediaSource Organizator) w ten oprogramowanie ?w jeste? przy pomocy pod k?tem ten? Ono mog? tak?e wsp?pracownik je?li ty uto?sami? co oprogramowanie jeste? przy pomocy pod k?tem str?owa? kino. Je?li masz nie ju?, pr?bowa? czyni?cy niezdolnym tw?j na pok?adzie soundcard w BIOS.Message Edited by Katman on 08-04-200709:09 PM

Audigy 4 Sound

Similar Messages

Maybe you are looking for