Audigy and Audigy 2 ZS Front Pa

I have a audigy 2 zs, will a front panel from audigy work with my sound card? thannks

No, I'm afraid not. These two are incompatible.
Cat

Similar Messages

Problem with Audigy 2 Platinum Front Panel Input

0Problem with Audigy 2 Platinum Front Panel Input? Hey everyone,
Here's the background of the issue. I got a PS3 over the holidays for literally free
I had my computer out in a testbed style. Plugged the PS3 into my monitor HDMI --> DVI cable, and Red/White into the front RCA jacks of the Front Panel (Aux 2). As soon as I plugged in the cable, I got sound out of my speakers and was able to enjoy my PS3 in 720p
I put all of the components back into the case after cutting exhause and intake fan holes. I brought everything back to school, fired up the PC and PS3. Lo and behold, there is no more sound from the PS3. I know that PS3s are temperamental in moving, but I hooked the audio up to my TV and the sound came out just fine. The AD Ext cable looks like it's secure and in place. When I hooked up a mic and headphones to the front, they worked fine as well. However it seems to be just the AUX 2 RCA inputs that dont work anymore. Any ideas about how to fix this issue? Is there a function I have to turn on now in the software to allow sound to pass through? Any information would be wonderful!? I'm going to try an optical cable in the near future, just need to borrow one from a friend =/

Problem Solved.
I had moved my cards around for better airflow. I moved the SB Audigy card from the bottom PCI slot to the top. Thinking this might be the problem, I moved the video card back to the top slot PCI-E and the sound card to the bottom PCI slot. Sound is now working again. Thanks for the thread views?:smileytongue:
Think that when I have to buy Win 7 for real if the problem would still persist if I moved the card again? Or is this a hardware limitation?

Connecting Audigy 2ZS to Front Pa

I have audigy2zs and just bought a front panel for it. however it didnt come with any cable so im wondering what kind of cable i need. i was thinking ide cable but it doesnt seem right. i appreciate all the replies.

Spetznaz24,
If this was a new retail purchase, then I would recommend contacting Customer Service to have the proper cable sent to you. If not, then the cable is basically just a non-keyed IDE cable.
Daniel

How to capture an image from my usb camera and display on my front panel

How to capture an image from my usb camera and display on my front panel

Install NI Vision Acquisition Software and NI IMAQ for USB and open an example.
Christian

Enabling / Disabling graphs and opening a new Front Panel Window

Hi,
I have a simple application of showing 12 analog signals on 12 different graphs placed vertically in aligned position. I have to develop a user interface so that if user wants to display signal no. 1, 4 and 6 out of total 12 signals, he should make selection using check boxes and click a re-draw button. It should result in opening a separate window with these three signals displayed as separate graphs aligned vertically and adjusted to fit window size. Similarly later user can change his selection of displaying signals (from same acquired data) say 1, 3, 5, 6, 8, 9, 11 & 12 and click Redraw button. It should result in opening a new Window showing all these signals as separate graphs which are aligned vertically and resized to fit the window. Now I have two major issues in this context.
1) I have been searching LabView help to locate a way to open a new window for this purpose but I failed to locate any way for it. As per my limited knowledge, it seems that we cannot have multiple "Front Panel" windows in Labview.
2) For the graph I could not locate a control to enable/disable a graph so that it appears or vanishes. Is there any way to achieve it?
I shall appreciate your valuable advice. I shifted from "Lab View Signal Express" to "Lab View" in order to achieve this user interface design but I am still not successful in finding a good solution for this application.
Regards
Mnuet

Hi Mnuet,
You can do what was said above. Here is a KB on dynamically loading VIs. It looks something like this.
Dynamically loaded VIs are loaded at the point in code while running, as opposed to being loaded when the parent VI is loaded into memory like normal subVIs. You can make a reference to them and then control the front panel appearance, their run status, etc with property nodes and invoke nodes.
Jeff | LabVIEW Software Engineer

How do I make a table of contents for a collection of six short stories that is after the legal page and NOT in the front on an unnumbered page?

How do I make a table of contents for a collection of six short stories that is after the legal page and NOT in the front on an unnumbered page?
When I first started I made a title page and then pasted in my first story from a .TXT file. After cleaning up I went back to the front a couple of empty lines ahead of the story and typed in the story title. Unlarged the font size and centered it, then

You can't do that. This is what the Pages User Guide, downloadable from your Pages Help menu, says:
Creating and Updating a Table of Contents
Each table of contents (TOC) you create using a Word Processing template lists only the content that follows it, up until the next table of contents. If you want a master table of contents for the entire document, it must be the only table of contents, and it must be at the beginning of the document.
You can do it manually though.

How to change the font and type in the front panel

Can you tell me how to change the font and type in the front panel if i want to make it looks more beautiful.
1110340040

Hi there,
You can change the font size and type as shown below:
- Ee Lim -
See that button on the left side of this post...
If you feel my post is helpful, all you need is just (at most) 2 seconds to click that button, to show your appreciation. Thank you~~

Finder window keeps opening up and popping up in front of all windows

Every minute or so a finder window opens and pops up in front of all open window - including the window I am working in (no matter which application). It does not even open to my regular finder - it opens to a sub folder that is on the sidebar as a shortcut. Might have started after security update that was not necessarily completed because after 6 hours I tried to cancel, then force quit, it wouldn't work, so I forced the computer to restart.

Hi Basie & welcome to the forums!
We should start with these...
Have you done these two lately...
Using Disk Utility in Mac OS X 10.4.3 or later to verify or repair disks...
http://docs.info.apple.com/article.html?artnum=302672
About Disk Utility's Repair Disk Permissions feature...
http://docs.info.apple.com/article.html?artnum=25751
Reboot afterwards.

Is it possible to change the font style and size of the front panel title?

Can you change the style and size of the Front Panel Window title? I seem to have no luck. I seem to be stuck with only 1 font/style. I would like to use a superscript for 1 of the letters in the title. Is this possible? If it isn't this would be a nice feature to have in the future. I am using LabVIEW 8.5.1.

Things like the window title font is a function of Windows - not LV. You can change it globally, but not on a window by window basis.
Mike...
Certified Professional Instructor
Certified LabVIEW Architect
LabVIEW Champion
"... after all, He's not a tame lion..."
Be thinking ahead and mark your dance card for NI Week 2015 now: TS 6139 - Object Oriented First Steps

Otterbox Defender: Is It Hard to Get In and Out of Your Front Jeans Pocket?

Hi. Is the Otterbox Defender hard to get in and out of your front jeans pocket? Thank you in advance.
Gbu

Doesn't seem "huge" to me. I carry it in my jeans pocket and have no problem getting the iPhone into or out of the pocket.

Was updating iPod and computer shut down and now my iPod is frozen with itunes symbol and USB symbol on front of iPod???

I was updating my iPod and computer shut down and now my iPod is frozen with iTunes logo and USB symbol on front and is unresponsive. Any ideas?

Have you checked the knowledge base articles
http://support.apple.com/kb/HT1808
http://support.apple.com/kb/TS3281

When I try to connect my bluetooth keyboard to my ipad, the dialog box pops up and says: "Make sure 'Apple Wireless Keyboard' is turned on and in range." But the keyboard is turned on and is right in front of the ipad. Any thoughts?

When I try to cnnect my bluetooth keyboard to my ipad, the dialogue box pops up and says: "Make sure 'Apple Wireless Keyboard' is turned on and in range." The thing is, the keyboard is on and is sitting in front of the ipad. I have used it before, but not for many months. I changed the batteries today just in case. The green light on the keyboard comes on and continues blinking. What am I missing?

Keyboards Can only be paired with one device at the time so if it's paired with another device IN range it Will not pair with the ipad

Replaced digitizer and lcd screen now front camera freezes in virtual shutter mode

recently replaced digitizer/lcd screen now the front facing camera does not work ,freezes on virtual shutter screen and cannot swap from front to rear camera (rear camera works on facetime )

Either the front camera is damaged or the connection of the camera to the logic board is messed up. Take it apart and try to find/fix the problem

Ringtones showing in itunes in in this iphone with grey color and a circle in front how bring back to iphone?

ringtones showing in itunes in in this iphone with grey color and a circle in front how bring back to iphone?

pls help me

On Facebook, cat came and laid down in front on keyboard and now FB is SUPER TINY, help

I have no idea how this happened. My stupid cat came and laid down in front of me, on the keyboard, leaned back and suddenly the web page got teeny tiny. I cannot even read it.

Ctrl++ worked

Audigy 1 SB0090 and CoolerMaster Centurion 5 Front Panel Au

Hi is it possible to connect the front panel audio headers of the Cooler Master Centurion T05 casing to the Audigy SB0090 AUD_EXT header? I don't have the creative properity connecter(white connecter on top left of card) on the card.
Thanks and hope to hear some replies soon.

jamesroy wrote:
how can I connect my front panel audio out and mic in to my audigy soundcard?model no. SB0090
hope for your replies... thanks...
Audio output:
If you can't find a 0-pin Proprietary connector on Audigy's board then the only solution is split the signal from Front L/R cannel (it can be splitted from Rear L/R too, but you need to be able to output stereo signal to Rear L/R too (speakers set to 4/4., etc.)).
Microphone:
Same base rules as above but no extra settings needed.
jutapaMessage Edited by jutapa on 05-06-2006 :37 AM

Audigy and Audigy 2 ZS Front Pa

Similar Messages

Maybe you are looking for