Audigy and vista build 5
hello,
i have a Audigy sound card and using Vista build 5308.
i was wondering if there is any solution for the BSOD that appears when restarting/shutdown the pc. am i the only one with this error ? i realise these drivers were released for beta but still...
also, 5. sound is not working. after setting from control panel to 5. sound, only the front, center speakers and the subwoofer works.
when setting 5. speakers, wmp crashes too.
thanks,
OJi.
Hello Deadly,?Go and get ALchemy and install it. then go into the program folder (of ALchemy) and copy the dsound.dll and dsound.ini to your Executable folder. Which should be something like C:/Program Files/Steam/Steamapps/(account name)/hl2.
Then modify the INI file and put the duratino to 5 and that should fix your problem.
Tried it on my CSS (not in game but rather the TEST YOUR SPEAKER button) and everything is back to normal after this.
Hope this helps
Similar Messages
-
SOUND BLASTER AUDIGY SE AND VISTA DRIVERS WITH FULL FUNCTIONALITY- WOOOOO
(ONLY DRAWBACK IS THAT YOULL HAVE TO FIND ANOTHER MEDIA PLAYER BESIDES WINDOWS MEDIA PLAYER FOR YOUR SAVED AUDIO FILES: I WENT WITH WINAMP)
CONTINUE ON-
Download RAR file with ISO inside and install if you don't have the installation CD
installation cd with EQ download: http://files.filefront.com//;689430;;/
If you do or after you finish downloading goto step A.
A) Take your Creative Driver/Install CD, copy it to your hard dri've.
B) Goto Setup.exe right click, goto properties, goto the Compatibility tab.
C) Set it for Windows XP SP2.
D) Run install the Creative Audigy and if you need MediaSource *WMP Will pop and hiss while multitasking I reccomend MediaSource as it does not although the "Sources" is glitchy.
E) Restart when told to
F) Part ) Right click on the speaker icon by the clock, click Audio Devices... Right Click on Playback Control, goto properties click Configuration Set it to Stereo hit apply.
F) Part 2) Goto Speaker Settings, Set the configuration to 5./7. depending on what you need, then make sure Sync with Control Panel is UNCHECKED I found that is the critical element! Enjoy your multichannel!
G) Part ) Right click on the speaker icon by the clock, click Audio Devices... Right Click on Playback Control, goto properties click Configuration Set it to Stereo hit apply.
G) Part 2) Goto Speaker Settings, Set the configuration to 5./7. depending on what you need, then make sure Sync with Control Panel is UNCHECKED I found that is the critical element! Enjoy your multichannel!Message Edited by jeepbme on 03-08-200708:49 PM
Message Edited by jeepbme on 03-08-200708:50 PMestebandit wrote:
Is there a known issue for this
Yes it is called trying to install the wrong driver for your card. Will work much better if you try installing the correct one,
SBAX_PCDRV_LB_2_8_000.exe
Also helps if you click on the "Show Details" link on the download page, then you would see that the one you tried to install doesn't support your card,
Requirements:
Microsoft Windows Vista 64-bit, Windows Vista 32-bit, Windows XP Professional x64 Edition, Windows XP Service Pack 2, Windows XP Media Center Edition 2005 or Windows XP Media Center Edition 2004
Sound Blaster Audigy Value/SE/LS, or Sound Blaster Li've! 24-bit audio devices
whereas the correct driver shows the following,
This download supports the following audio devices only:
Creative Sound Blaster Audigy including Platinum and Platinum eX series
Creative Sound Blaster Audigy 2 including Platinum, Platinum eX, and Value series
Creative Sound Blaster Audigy 2 ZS including Platinum and Platinum Pro series
Creative Sound Blaster Audigy 4 Pro and Sound Blaster Audigy 4
Creative Sound Blaster Audigy 2 ZS Notebook PCMCIA -
Audigy 4 - Vista drivers and software urgently nee
you know... i have this sound card (Audigy 4 - non pro) for over one year now, AND i don`t have a good driver and software for windows vista home premium x64. last driver for this sound card is:
. Creative Sound Blaster Audigy series Vista Driver 2.2.0002 (38.30 MB) 6 Mar 07.
i mean... 6 mar. 07
how long do i have to wait for you, to relase all the software it is on windows xp oh, this audigy 4 was not intended to use with vista, wright and you want everybody to buy that x-fi sound card with another set of problems in windows vista. nice marketing solution. good for you ONLY.
i`m just tired waiting. my card doesn`t work as it should, nor as it worked in windows xp.
i need all that software. all of it, working under vista. PRONTO!
you will provide that software, or you just lost me as a customer, and along with me, alot more.
btw, daniel_k was only helping people, by providing drivers and software YOU couldn`t, or you just didn`t wanted to. stop deleting his posts or links to the drivers made by him.
just stop that abbusi've marketing strategy, by not releasing software for older sound cards, and forcing customers to buy your new products. no, that wouldn`t happend.http://forums.creative.com/showthread.php?
-
Inspire (creative) P7800 7.1 and Vista
Ok so i?just bought?the creative inspire p7800 7. surround speaker system. I have windows VISTA-32 I already know there is no driver for it yet, but I was just wondering if anyone could tell me when its release date is? can i go somewhere to request it,i know it wouldnt make much of a difference, but always counts somewhere. Also is there maybe some other way i can get my system working? right now I only have?the front 3 working. So any input would be nice thank you ?
No way buddy, I've an Inspire P7800 too, if you see de miniplugs conectors there's one of them that isn't stereo, there're 3 black lines into the connector (creative's "special" connector) that only works with a creative sound card... but I worst cases... you many be able to hear 6 channels instead 4... I recommend you to downalod lastest Sigmatel audio from their website http://www.sigmatel.com/products/pcaudio/ If it isn't work, and you have to buy and audio card... DONT BUY CREATIVE!!!!!! send ur bucks in an AUZENTECH X-meridian 7. that really works in vista, I own an Audigy SE (VISTA READY sticker on box)... and I have year waiting for vista drivers... dont waste ur time buddy and good luck!
-
Nokia PCS 6.84, IVT Bluesoleil 2.6.0.8 and VISTA
Hi Folks,
hoping you can help here please. I have just purchased a new VISTA Compatible Dongle and when installed PC Suite will not work over bluetooth. The connection manager shows "Bluetooth (IVT Blue Soleil)" but, when selected gives the message "Cannot use the connection type". Software details as follows:
Operating system:
Microsoft Windows Vista
Build 6000
No service pack installed
Language: English
Language for non-Unicode programs: English
Locale: English
Input language: English
Nokia PC Suite:
Version 6.84.10.3
Language: English
Connectivity Cable Drivers:
Version 6.84.4.0
PC Connectivity Solution:
Version 7.22.7.1
Bluetooth stacks:
Microsoft Bluetooth stack
Version 6.0.6000
Build 16386
IVT Bluetooth stack
Version 2.6.0.8 Release 070517
Build 16386
Many Thanks,
MattAh no I typed too soon. Although Microsoft Bluetooth Stack works fine with Nokia PC Suite, and it appears that this is the only bluetooth stack which Nokia support on VISTA, there is a cruel twist of fate:
Microsoft Bluetooth Stack does not support the handsfree and headset profiles so now my Bluetooth headsets will not work. Ironically, these work great on VISTA Stacks. So it appears that, until Nokia come to the party with support for Bluesoleil on Vista OR Microsoft come to the party with support for Handsfree and Headset profiles on their Vista Stack that its a choice for me of:
[1] Nokia Phone over Microsoft Bluetooth Stack
OR
[2] Bluetooth Headsets over Bluesoleil Bluetooth Stack
Should I moan to Microsoft or should I moan to Nokia seems to be the only decision I can make at this point in time. -
Ever since I installed ITunes 7.02, I have been unable to sync my iPods with any of my Vista PCs. On different machines I was running RC1, RC2, and even build 5780 which was post RC2. Today I installed the final release version and still can't get the PCs to talk to my iPods correctly. Either iTunes does not see them at all (Windows does) OR if they are visible in iTunes you get all kinds of random errors when trying to sync.
Are others having this problem? Are there any known workarounds? I tried Vista compatibility mode but it did not work either. Vista has been around long enough you would think Apple would have this working by now.
Other OS
Other OSFor what it is worth, I second that;
Vista's "final release" does NOT work with 7.02...
In fact it will reboot your machine randomly without warning and Vista will not "catch" the problem...(no blue screen etc - just instant reboot/bios screen).
Phredd
iMac G5 Mac OS X (10.4.8)
PowerBook 12 1.33 / 512M / SD -
When are Audigy 2 Vista drivers comi
What is the problem with Creative and Vista?
Why can't U make some proper drivers?
The driversupport Creative is giving to their users is dramatic! An X-Fi of Audigy 2 lost all its EAX features in Vista!!! Vista is out for a half year now, and I still have to work with BETA drivers which is giving weird positioning bugs in games!
Whats the problem
I paid for the card so I really need some driver support!
What?s ur opinion on this dear creative usersMessage Edited by dhp on 05-20-20072:53 AMDyNaMiX wrote:
OpenAL hardly means much to Audigy users.Message Edited by DyNaMiX on 05-2-20072:46 AM
What makes you think that. OpenAL works just fine on Audigy cards. Playing BF2 in vista sounds just the same as in XP on my A4. -
Creative Surround Mixer for Audigy SE / Vist
Hello
I've got a Creative Audigy SE on my computer, but I still haven't found Surround Mixer for Vista.
Where can I get it ?
Regards,
k_iowascreative are force all us to change to x-fire, i cant belei've creative cant make software for audigy when vista is about year old.
Creative just lies to us. (as alchemy that supose to by only for x-fire)
PD: i have audigy2 SZ and i wont change to x-fire or another creative product, this is simply the last creative product for me -
PAX Live-Audigy Se Vista 7 v1.00
PAX Li've-Audigy Se Vista 7 v.00
Creative all rights be long to Creative and logos. Creative giving me there writing persimmon by Robert McClelland.
PAX related logos and software and drivers are own by PAX
- Please don't remod my work with out permission you can contact me at Hardwareheaven.com
Celebrating
5 years of PAX drivers.
- Vista/Win7 32/64Bit - Read me
PAX
Performance Audio Xeleration
Tweaked Drivers for Creative Soundcards:
Better Performance. Better Audio. Better Xeleration.
Tweaked Edition
Supported cards:
PAX Li've-Audigy Se Vista 7 v.00
Supported OS:
Vista, Win7
32 and 64Bit
Based on:
SB24_PCDRV_LB__04_0090
+ Updated Tweak As of .08.0
+ Support Speaker Default to 5.
Important :
Before installing, remove all traces of any previous drivers and all driver related software, using add/remove programs within the control panel and following that, by removing the driver within "Device Manager". To clean up any excess files left on your system, you should use a 3rd party program to do this job (unless you've a good understanding of the registry) A recommended program to do this is Driver Sweeper - which is freeware, and available from http://www.guru3d.com/category/driversweeper/ or paid version at hardwareheaven.com driver cleaner.net
To install the software suite and driver :
Providing you've followed the steps above, restart your computer and run Setup.exe. Follow through the prompts until the installation has completed.
Please used register cleaner like tune up Advanced SystemCare iobit.com or crapcleaner
Please make sure you installed lastest direct x included in the suite of June 200 if you haven't done so.
What is Pax
Formally known as Youpax, Pax was founded by Robert McClelland 5 years ago, who is continuing to provide an alternati've tweaked driver to the Official driver released by Creative.
Why should I install this Pax alternati've
Pax is aimed at improving sound quality and to give a more deeper bass sound, while retaining the clarity of the overall output audio. Most users continue to use Pax drivers once moving over and never look back!
PAX 2005-200
http://dl.technewshw.com/drivers/PAX/PAX%20Li've-Audigy%20Se%20Vista%207%20v.00.7z& What did you especially fix or add? I have surfed all around in gameheaven forums and other places but the only thing you wrote is" better performance, better exelaration etc" . I dont think it is enough , you HAVE TO tell which software modules you added or what you have tweaked.
If I were you I would take a look at Daniel_k's threads and take them as reference before posting.................. -
Has anyone been able to install both Windows XP Pro (32-bit) and Windows Vista Ultimate (64-bit) on the same dedicated Windows hard drive? I have four HD in my Mac Pro, and one of them is dedicated for Windows (and bootable via Boot Camp). I found the following technical articles about installing Windows XP & Vista on the same hard drive (using two separate partitions) using a VMWare machine as the test system:
http://apcmag.com/howto_dual_boot_vista_and_xp_with_vista_installed_first__the_stepbystepguide.htm
http://apcmag.com/howto_dualboot_vista_with_xp__stepbystep_guide_withscreenshots.htm
Has anyone successfully installed Windows XP (32-bit) and Vista 64-bit) on the same NTFS partition?
I already have Windows XP Pro (32-bit) SP3 installed on my single NTFS hard drive. I am looking for the best way to add the Vista 64-bit installation on the same hard drive.
Any thoughts and advise are appreciated.Windows has its own list of boot OSs, and default, from msconfig. It will sit and wait for xx-seconds on startup in Windows if you want to boot from an alternate.
As to whether Apple's OS Switcher (aka startup disk bootcamp control panel or tray icon) sees both, I had Windows Home Premium and Ultimate 64, and pretty sure OS X saw both. That was pre-Leopard and before there were 64-bit Apple drivers.
I can't think of any scenerio of wanting to mix 32-bit and 64-bit on the same paritition, you realize you can't install the one over the other and must do a clean install.
When I added a partition out of main partition (I wanted to put search index and page file on their own partition) those partitions aren't seen - are hidden - to Leopard. -
Problem with standby and Vista
Hi!
I've a problem with my X61 with the Turbo Memory and Vista x64: When I install the driver for Turbo Memory, I cannot resume from standby. The notebook does only a "normal" reboot.
Can anybody help me with this problem?
scwwell after a lengthy talk with many microsoft reps i found something. I was an updated version of this "WUDfrd.sys" file. But the problem was that i could not see a download link. but after a little while i convinced microsoft to give it to me. at first it looked like it had potential but after i restarted, every went down the plug hole. here is the link that i was talking about.
http://support.microsoft.com/kb/933607/en-us
problem still not solved and not looking to be solved for a long time by the looks of things.... NOT HAPPY JAN!!! -
Having Problems with connections and access. I have spent the last 2 days reading various threads regarding SQL Reporting Services pertaining to access and connections.
First, let me explain what I have done to date.
1) I am using Windows 7 - Home Premium.
2) I downloaded and installed MS SQL Server 2008 R2 Express. This was successful.
3) I downloaded Report Server 3.0 - This was successful.
4) In IE, I tried logging onto http://servername/reports, but this failed. After logging into IE
via ' Run Administrator', I was able to access URL.
Next, I updated the security / trust sites as explained in the
threads
Next, I went to Folder Setting and added my user name and granted all roles (Browser,
Content Manager, My
Reports, Publisher and Report Builder).
5) Now, I can log into Http://servername/reports using my normal windows 7 user account.
6) Next, I opened Report Builder 3.0. However, I am having trouble connecting to report
server. I tried connecting with
http://servername/reports, but this failed.
However, If I change URL to http://servername/reportserver, it works. BUT NOW, I have
another problem. When I
execute the RUN button to create report, I get a permission
error. "PERMISSION GRANTED TO USER ARE
INSUFFICIENT FOR PERFORMING THIS OPERATION".
7) Finally, I can not save reports to http://servername/reportserver when I select "Recent
Site and Servers". ERROR
MESSAGE: UNABLE TO OPEN OR SAVE REPORT
8) In my Reporting Services Configuration Manager:
Web URL = http://servername:80/ReportServer
Report Manager URL = http://servername:80/reports.
What is strange, the Report Manager URL works for IE URL and WEB URL works for
Report Builder connect (Even though it really does not work).
THREE QUESTIONS:
1) What URL should I use to connect in Report Builder.
2) How do I update my normal Windows 7 user so I can run reports when I connect to report
builder.
3) How can I save my reports so they are displayed in IE Reporting services. Note: I was
able to save report to
documents folder and import into IE Reporting Services.
4) And finally, is it possible to add report builder 3.0 as a tab in my IE Reporting Services. I
save seen samples of Reporting Services screens where the instructor has Report Builder
tab.
Thanks
DanTo answer question 1... it should connect through /ReportServer
http://bretstateham.com/reporting-services-architecture-diagram%E2%80%A6/
Report Builder 3.0 is not a web application, it is a client side application can be used using the click-once or downloaded from Microsoft's website. If you are having issues, you might download and install it and try running it as an administrator. -
I am using the Firefox 3.6.3 version with my new Windows 7 operating system. When I used all the previous Firefox versions in my XP and Vista operating systems, image quality and resolution was excellent! However, now that I have upgraded to Windows 7 and Firefox 3.6.3, the image quality and resolution is poor (unacceptable for downloading purposes).
== This happened ==
Every time Firefox opened
== I first activated my new computer and installed the Firefox 3.6.3.All my images are pixelated in firefox 3.6.3
http://www.dcgdcreative.com
Not only on my site but on most sites I view.
The issue is not solved by resetting the zoom text view (ctrl+0)
The issue is not resolved by starting in safemode with add-ons disabled
The problem seems to only affect .jpeg files and only on Windows 7 on my desktop; as I have viewed several sites using windows XP with my laptop, no issues.
I had the same issue with IE8 and was able to fix the problem with by setting up the compatibility view for all sites. Issue fixed no problems at all. But nothing similar for firefox?
Whats the deal? -
Using VMWare Fusion and Vista for NetFlix Watch Now
Hi, I have installed Fusion and Vista in order to use NetFlix's Watch Now feature on my MBA. The installation was easy and Vista seems to be working fine. However, I can't get the Watch Now movie going. The film will start (after NetFlix determines my internet speed, etc.) and alternate between play and pause. Has anyone used this combination with success? Would a downgrade to XP work better? Or I should just use Boot Camp? Thanks.
I've used WinXP with Fusion on a MacMini and it was fine (but faster in BootCamp). I'm currently running Vista Business on a MacBook Pro in Parallels and while it isn't slow, it certainly is slower than in BootCamp. I expect Fusion would run Vista a bit faster - Fusion does tend to be a bit faster than Parallels but Parallels seems to get along better than Fusion with one of the applications I'm using.
There are advantages to BootCamp and BC isn't incompatible with virtualization. I suggest that you go ahead and install Vista in BootCamp. If you haven't already bought Fusion, download the demo and see how it runs using the BootCamp installation and compare that to BootCamp itself. Then decide. -
Revision: 3120
Author: [email protected]
Date: 2008-09-05 10:44:10 -0700 (Fri, 05 Sep 2008)
Log Message:
When you point Flex Builder at a local sandbox trunk build, it couldn't generate the html-templates folder correctly for new projects so we moved all the html templates up one level and removed the html-templates directory and adjusted build.xml's to accommodate the directory change
Modified Paths:
flex/sdk/trunk/build.xml
flex/sdk/trunk/webapps/webtier/build.xml
Added Paths:
flex/sdk/trunk/templates/client-side-detection/
flex/sdk/trunk/templates/client-side-detection/AC_OETags.js
flex/sdk/trunk/templates/client-side-detection/index.template.html
flex/sdk/trunk/templates/client-side-detection-with-history/
flex/sdk/trunk/templates/client-side-detection-with-history/AC_OETags.js
flex/sdk/trunk/templates/client-side-detection-with-history/history/
flex/sdk/trunk/templates/client-side-detection-with-history/history/history.css
flex/sdk/trunk/templates/client-side-detection-with-history/history/history.js
flex/sdk/trunk/templates/client-side-detection-with-history/history/historyFrame.html
flex/sdk/trunk/templates/client-side-detection-with-history/index.template.html
flex/sdk/trunk/templates/express-installation/
flex/sdk/trunk/templates/express-installation/AC_OETags.js
flex/sdk/trunk/templates/express-installation/index.template.html
flex/sdk/trunk/templates/express-installation/playerProductInstall.swf
flex/sdk/trunk/templates/express-installation-with-history/
flex/sdk/trunk/templates/express-installation-with-history/AC_OETags.js
flex/sdk/trunk/templates/express-installation-with-history/history/
flex/sdk/trunk/templates/express-installation-with-history/history/history.css
flex/sdk/trunk/templates/express-installation-with-history/history/history.js
flex/sdk/trunk/templates/express-installation-with-history/history/historyFrame.html
flex/sdk/trunk/templates/express-installation-with-history/index.template.html
flex/sdk/trunk/templates/express-installation-with-history/playerProductInstall.swf
flex/sdk/trunk/templates/metadata/
flex/sdk/trunk/templates/metadata/AC_OETags.js
flex/sdk/trunk/templates/metadata/readme.txt
flex/sdk/trunk/templates/no-player-detection/
flex/sdk/trunk/templates/no-player-detection/AC_OETags.js
flex/sdk/trunk/templates/no-player-detection/index.template.html
flex/sdk/trunk/templates/no-player-detection-with-history/
flex/sdk/trunk/templates/no-player-detection-with-history/AC_OETags.js
flex/sdk/trunk/templates/no-player-detection-with-history/history/
flex/sdk/trunk/templates/no-player-detection-with-history/history/history.css
flex/sdk/trunk/templates/no-player-detection-with-history/history/history.js
flex/sdk/trunk/templates/no-player-detection-with-history/history/historyFrame.html
flex/sdk/trunk/templates/no-player-detection-with-history/index.template.html
Removed Paths:
flex/sdk/trunk/templates/html-templates/Remember that Arch Arm is a different distribution, but we try to bend the rules and provide limited support for them. This may or may not be unique to Arch Arm, so you might try asking on their forums as well.
Maybe you are looking for
-
Validation required so that invoice, billing and accounting is done on same
Validation required so that invoice, billing and accounting is done on same date as the PGI date. Very urgent please help. Please look into the below scenario. Excise invoice posting date u2013 07.10.2011 A/c doc posting date u2013 29.09.2011 Reflect
-
Int not increased when incremented in method call
Hi, Could someone please explain why my int value is not increased in value when the increment is performed within a method call? private void printString(int i) if( i > 5) System.out.println("Greater than 5!"); else printString(i++); }Th
-
How do I clean my mac to stop a virus from coming in?
-
R12 BSVs was attached in legal entity in error
We have one legal entity and I attached the 3 Company BSVs in the legal entity in error. There is a remove button but it's currently grayed out. Is there a way to remove the BSV from legal entity?. No transactions entered in GL or SL. Thanks, Leo Edi
-
Previous photo files delete off iPad air when adding photos from PC
Just bought the iPad air, was trying to add a folder of photos via iTunes. They synced successfully when I tried to add another folder of photos on to iPad the first folder was deleted. What am I doing wrong?