Audigy board is recording in mono when using "what you hear" or "wave" m

I have an Audigy SB394 EAX HD Sound card, Model SB0090. I've installed the latest drivers with XP Pro, and the card runs just fine for games and such. However, when I try to record with it using "Wave" or "What You Hear" mode, it comes out sounding like it's in mono mode. My sound and music is not playing in mono, so why would it be recording that way?Message Edited by vonshep on 02-26-200805:42 PM

NI'll give them a try and post back here with the results - am I correct in assuming the driver pack you speak of is located here? If so, another post by daniel says specifically that his pack doesn't enable the feature, but I'm going to try anyway.
EDIT: Nope, no luck, didn't enable the feature.

Similar Messages

6Controling recording through "What you hear",

Dear community, Breif question, Is there any way to control what i record through "what you hear"?
Im using "Creative MediaSource 5" to record. I'm recording a radio show through Internet Explorer 8, and its two hours long. I've turned off windows sounds, but if i play a game, or video it will record that sound aswell through "what you hear", obviously which i do not want. I feel restricted on my computer while recording and don't think i should be with a product from top developer like creative. I found small fix by using windows 7's sound mixer and turning down volume on all other open apps but it would be ncie to implenet this into a seperate "what you hear" mixer recording. If you know of any third party apps i would be much obliged if not don't you think this would be something to implement in the future?
Thanks for taking the time to read my issue and hope you can solve my answer and look forward to your comments.
Regards
Revs

Problem resolved. Follow Creatives FAQ advice on uninstalling the Soundblaster device drivers...it's on this web site. Follow all the steps, but include deleting "Creative" out of the registry. This worked for me. I can not guarantee this on any other users machines. I'm assuming that the drivers get's damaged.
Good luck.

Windows7 64 bit and Audigy 2 choppy sound while recording what you hear

Driver version I have currently installed 6.0..37 I tried to record off youtube in "What You hear" while using Wavelab5 mode and the sound is very choppy, I tried every setting I could think of but am unable to record, I managed to get one recording but tnext one with same settings is coming up rearry choppy. Another problem when browsing the support I click on "If your product is not listed above, please click here" I choose Audigy-->Audigy2 but I get nothing in the next window, I tried on FF and IE8 but nothing populates in the next field, found another way to get to the drivers but when I choose Windows 7 64 bit and choose drivers it takes me to the main support page here <a rel="nofollow" href="http://support.creative.com/welcome.aspx"]http://support.creative.com/welcome.aspx[/url]
I am on:
Intel Q2600
Gigabyte GA-X48-DQ6
2 x 2GB DDR2 - 800 CL4 Ballistix
Windows7 Ultimate 64 bit
Kaspersky Internet Security 200.
All current Windows7 updates are installed.
Oh yeah I can hear music (mp3, avi, youtube or any online source) no problem in either winamp, WMP2 or in Wavelab5 while monitoring. It's only the recording that is giving me trouble.
Cheers
Rob.

<div class="DownloadDate">"Release date : 3 Jul 09<div class="DownloadShortDesc">This?download is a?driver providing Microsoft? Windows?7, Windows Vista? and Windows XP support for Creative Sound Blaster? Audigy? series of audio devices. For more details, read the rest of this web release note."?
Right where do I start...... I got the latest drivers installed, "What You Hear" was working for about oh four recordings then stopped and back to choppy recorded sound, I went through alll options and nada. So I downloaded Audacity to see if this was a problem with Wavelab and re-tried. Well same thing choppy sound and even rebooting did not help. So I will be taking EVERYTHING!!!!!! CREATIVE off my machine, if these idiots cannot be bothered to release drivers that work then I'm going elsewhere. My music creating will have to be put on hold, my 22m will still have to sit in it's box.
Creative you are all a bunch of ?$"?%$%" idiots period. You have ALWAYS (till now in my case anyway) had good drivers. Even though Windows 7 has been in RC for ages you (absolutely missed that boat, hell you didn't even get up to try to catch it) cannot be bothered to write drivers that work and your idiotic half cooked attempts at customer service to give your bread and butter (that's right your customers who keep you in business) solid drivers are an absolute joke. YOU CAN KISS MY SHINY METAL HINEY!!!!! (thanks Bender lol). I am going to my onboard drivers. Thanks Creative (the name "creative" is kind of contradiction in itself, you should look up the meaning of the word lol). Oh and I will be advising EVERYONe who thinks of upgrading to Windows7 to avoid Creative hardware.
:angry::angry::angry::angry::angry::angry::angry:: angry::angry::angry::angry::angry::angry::angry::a ngry::angry:
Question for forum users: what is the best way to get rid of every bit of drivers?

Using Analog 2 or "What You Hear" for stereo recording

I'm recording sound bites from tv shows and movies to my Audigy 2 Platinum by using the front-panel's Analog 2 by plugging in the left and right channels for the audio.
When I record directly from Anolog 2, the sound is real low, but If I record from the "What you hear" option, it comes out a lot louder.
Is there any difference in how the audio is being formatted during it's recording by weather or not if I use Analog 2 or "What you hear"? Like in surround sound? Will I get surround sound quality from either Analog 2 or "What you hear"?

DJ-FohpointWon wrote:
I'm recording sound bites from tv shows and movies to my Audigy 2 Platinum by using the front-panel's Analog 2 by plugging in the left and right channels for the audio.
When I record directly from Anolog 2, the sound is real low, but If I record from the "What you hear" option, it comes out a lot louder.
Is there any difference in how the audio is being formatted during it's recording by weather or not if I use Analog 2 or "What you hear"? Like in surround sound? Will I get surround sound quality from either Analog 2 or "What you hear"?
This low signal can be caused by wrong connection impedance or voltage, BUT also
Have you already tried by setting
- Source level to max (eg. Analog 2 in this case) on Surround Mixer and checked it equals on Windows Mixer (Control Panel_Sounds and Multimedia_Audio tab: Volume on both Play)
- Rec level too (on both as above /Rec)
I think you can't record surround directly using 1 stereo microphone/source.
.jtp
Message Edited by jutapa on 09-02-2005 08:21 AM

Error when recording with "What you hear" opt

Hi there fellow Creative Fans,
I see that a similar thread already exists for this topic, however it does not seem to be resolved yet...and, my situation is a bit different. I run a pretty standard setup (Intel P4 .6 Ghz, 52 MB RAM, Windows XP Pro SP2) and of course a Sound Blaster Audigy 2. I have been running this setup for approxiamately 5 months now with no changes whatsoever (hardware/software). I have been making extensi've use of the "What you hear" functionality in the Creative Media Go Player. Two nights ago, I wanted to record sound from a DVD and I got this message "The recording process was aborted".
As stated before, I have not added or removed hardware, installed service packs or any new software for that matter. I have reinstalled all the drivers and software, checked and re-checked settings. I have downloaded the latest drivers from Creative's site...all in vain.
Can anyone please help. If acker25 is reading this: "Have you resolved your problem yet?"
Regards
Steyn

Problem resolved. Follow Creatives FAQ advice on uninstalling the Soundblaster device drivers...it's on this web site. Follow all the steps, but include deleting "Creative" out of the registry. This worked for me. I can not guarantee this on any other users machines. I'm assuming that the drivers get's damaged.
Good luck.

"What you hear" recording volume is too

I have Soundblaster Audigy 2 on Vista 64-bit. I recently downloaded new drivers (6.0..242). This is after converting from XP and old drivers.
My "What you hear" settings work and will record using MediaSource Player, but the volume on the recorded file is about 25% the volume of the original file. This is verified upon replaying both the original and newly-recorded files side-by-side or right after one another.
When opening the Sound Panel>Recording Devices>"What You Hear">Levels, the levels are to the max and the balance is to the max for both right and left channels.
Although probably irrelevent, under Sound Panel>Playback Devices>Speakers>Levels, play control levels are max, and all other sublevels are?maxed, balanced maxed, and unmuted. (Sorry for my lack of technical description.)
I play the file on Windows Media Player and volume is maxed on the player as well. The interesting thing is when you look in the Sound Panel, the speakers show maxed volume and the "What you hear" only shows, again 25% of the volume.
Previously, I had no problems with XP and old drivers. I also was once able to revert to old drivers (which I can no longer do) and the problem went away. The difference was that the old drivers had a "Wav" level setting (under Sound Panel>Playback Devices>Speakers>Levels) where you could increase the level. These drivers don't appear to provide this setting.
Is there some setting I'm missing? Any help would be great. Thanks!

Jamrock wrote:
Where abouts is this located? I can only see "Microphone, Line in, CD Player, Video, AUX, Stereo Mix, Mono Mix"
Which card/software you got there?
If you use "Creative Surround Mixer" --> you can set the .REC source by pressing the icon located above recording level slider.
If you can't see the "W-U-H" option listed there, then check if it's already selected (ear icon).
jutapa

Recording what you hear on the comp

Well I got cubase but everytime i export the song the sounds are all different and ultimately the song sounds completely different then it was on the program, and even if i figured out how to fix this, i still have the problem of converting it a different format. So, instead of doing the two i was hoping to see if there is any way i can record what i hear on the computer. I tried and i didnt find a way and hoping someone here could guide me... i got an Audigy 2 Value and Windows XP if that is of any help. It be very appreciated if someone could help me. Thanks

which version of cubase are you using? as i dont use the home pakages im not 100% on if evertythings the same but im sure this will be! what export function are you using? and what is the input channel selected recording in the computers audio devices! if you select the input as waves that might help the "what you hear" recording outside of cubase.
use said you are using only midi files i agree with jutapa about using the vsti's if you read the cubase manual you will find that it mentions something about not being about to mixdown outside midi functions with out syncing the device cubase or something along those lines!
i didn't pay all that much attention as it's never been a problem for me!
here the part of the manual on mix down
The Export Audio Mixdown function in Cubase SX/SL allows you to mix
down audio from the program to a file on your hard disk, in a number of
formats. You can choose to mix down one of the following:
An output bus.
For example, if you have set up a stereo mix with tracks routed to a stereo output bus,
mixing down that output bus would give you a mixdown file containing the whole mix.
Similarly, you can mix down a complete surround bus, either to a single multi-channel
file (interleaved) or to one file per surround channel (split).
The channel for an audio track (Cubase SX only).
This will mix down the channel for the track, complete with insert effects, EQ, etc. This
can be useful for turning a number of events into a single file, or if you are using CPUintensive
insert effects – by exporting the track and re-importing it into the project you
can turn off the insert effect, saving processor power.
Any kind of audio channel in the mixer (Cubase SX only).
This includes VST Instrument channels, effect return channels (FX Channel tracks),
Group channels and ReWire channels. There are many uses for this – for example, you
can mix down an effect return track or turn individual ReWire channels into audio files.
Notes
The Export Audio Mixdown function mixes down the area between the
left and right locator.
When you mix down, you get what you hear – mutes, mixer settings
and insert effects are taken into account.
Note though that you will only include the sound of the bus or channel you select for
mixdown.
here's the bit okay seems you can't record midi in the mix down at all you have to record it like a normal audio file first. that's just with the record button on to a normal audio track you'll have to figure out how to get your midi to feed through into cubase
the way i do it is only leave the information out to the midi device plugged in and then plug the analog out put of the device into the input that cubase will record this will make sure cubase records the file as an audio file with out getting a cross over of the midi information being sent(i hope that makes sence some times i can make a muddle of explaining things). there are other ways to do this but this ways nice and simple and lazy! and works just aswell as any other.
MIDI tracks are not included in the mixdown!
To make a complete mixdown containing both MIDI and audio, you first need to record
all your MIDI music to audio tracks (by connecting the outputs of your MIDI instruments
to your audio inputs and recording, as with any other sound source).
With Cubase SX, you can also export selected tracks – this is a different
function that doesn’t create an audio mixdown.
Rather, this is a way to transfer complete tracks (including clips and events) from one
project to another
i left everything else in just in case you wanted to check through it!
1. Set up the left and right locator to encompass the area that you want
to mix down.
2. Set up your tracks, so that they play back the way you want.
This includes muting unwanted tracks or parts, making manual mixer settings and/or
activating the R (Read) automation buttons for some or all mixer channels.
3. Pull down the File menu and select “Audio Mixdown…” from the
Export submenu.
The Export Audio Mixdown dialog appears.
The upper half of this dialog is a standard file dialog, while the lower
half contains file format options and settings for the mixdown function.
Note that the available settings and options differ depending on the
selected file format
Select the bus or channel you want to mix down with the Outputs popup
menu (with Cubase SL you can only export busses, not channels).
This lists all output busses and channels in the active project.
5. Select the channel configuration for the mixdown file with the
Channels pop-up menu.
Typically you would select the same channel configuration as the bus or channel you’re
mixing down, but it’s also possible to e.g. mix down a stereo bus to a mono file. In this
case a warning will appear, asking if that’s what you want to do.
Here you will also find the “N. Chan. Split” and “N. Chan. Interleaved” options – these
allow you to create a surround mixdown file, either as one mono file per surround channel
– split – or as a single multi-channel file – interleaved (Cubase SX only).
The Channels pop-up and the “N. Chan” options are only available when
an uncompressed file format is selected (AIFF, uncompressed Wave,
Wave64 or Broadcast Wave).
For the other formats you can select stereo or mono using controls that are specific to
each format. When mixing down to 5.1 Surround, you also have the option to mix down
to Windows Media Audio Pro (Windows and Cubase SX only) – see page 670.
6. Select a file format with the File type pop-up menu.
7. Make additional settings for the file to be created.
This includes selecting sample rate, resolution, quality, etc. The available options depend
on the selected file format – see page 660.
8. If you want to automatically import the resulting audio file back into
Cubase SX/SL, activate the “Import to” checkboxes.
If you activate the “Pool” checkbox, a clip referring to the file will appear in the Pool.
Activating the “Audio Track” checkbox as well will create an audio event that plays the
clip, and place it on a new audio track, starting at the left locator.
The Import options are only available if you have selected an uncompressed
file format (AIFF, uncompressed Wave, Wave64 or Broadcast
Wave files).
9. If you activate Real-Time Export, the export will happen in real time, i.e.
the process will take the same time as regular playback.
Some VST plug-ins require this to have time to update correctly during the mixdown –
consult the plug-in manufacturers if uncertain.
CUBASE SX/SL
Export Audio Mixdown 27 – 659
When Real-Time Export is activated, the exported audio will be played
back on the Audition bus.
The fader below the Real-Time Export checkbox allows you to adjust the volume of the
Audition bus.
10.If you activate Update Display, the meters will be updated during the
export process.
This allows you to check for clipping, for example.
11.Select a folder and a name for the audio file to be created.
With some file formats you can create split stereo files (see page 661).
This will create two files (one for each side) with the same name, but
with the letter “L” appended for the left channel file and “R” for the right
channel file.
In the same way, split multi-channel (surround) files (Cubase SX only) will have the
same name followed by a number indicating the surround channel.
12.Click Save.Depending on the file format, an additional dialog may appear.For example, when exporting to MP3 format a dialog appears where you can add infoabout the song title, artist, etc. Make the desired
settings and click OK to proceed.A dialog with a progress bar is displayed while the audio file is created.If you change your mind during the file creation, you can click theAbort button to abort the operation.if you
have activated any of the “Import to” options, the file will be importedback into the project.When playing back the re-imported file in Cubase SX/SL, remember to mute the originaltracks so that you really hear the true result.
hope thast helps

Audigy 2 ZS plat Pro, "What you hear"? problem PLEASE H

Hello, im a gamer, I play cs:source. I just bought the plat pro and I have issues. In gaming you must use a microphone to communicate. And everything was great with my Audigy gamer. But after purchasing the plat pro I noticed I had a problem. In the system volume properties in recording windows xp has the default playback as "what you hear". It doesnt transmit what you speak into the microphone, it transmits "what you hear" Lets say you were listening to music and you try to talk into the mic. All they hear is the music, even though you have headphones on and the microphone isnt picking it up. Anyways, thats what "What you hear" does. So I select microphone in the recording properties and all is great, problem fixed. but when I load up cs:source and when I connect to a server it resets windows defaults to "what you hear" So everytime I connect to a server and try to talk all they hear are my game sounds. yes I can alt tab after connectiing to a server and switch it back again to "microphone" but its quite a hassle.
PLEASE HELP!

http://steampowered.custhelp.com/cgi...li=&p_topview=
next time, read ALL the available supports before turning to forums.

Can't get "What you hear" recording source to wo

I am using a SB Audigy 2 ZS platinum (sb0350p). There is no sound recorded when I try to record from the What you hear source.
I've tried to increase the volume in my advanced settings with no luck. It's if it is muted. I havn't checked any onter line in yet.
Any ideas?

Fireryan,
The setup depends on your input and output sources. In the Creative mixer, unmute (enable) a source such as the microphone or Line-In and slide up the volume. If you're using a microphone, unmute that line and click on the red X and check +20dB boost. Also, click the red X over the "Master Control" and make sure you don't have digital output selected (unless that's what you want.)
BobMessage Edited by Katman on -30-2005 0:34 PM

Record what you hear

I have a Pavillion DV8-1250EA 4 GB RAM 2x320 GB Discs which has an IDT HD Audio device and uses the Windows 7 64-bit operating system.
I want to knwo how to record audio internally (e.g. audio played from the Internet).
I am able to do this on my desktop which has a Soundblaster Audigy 2 ZS Platinum Pro card and runs Windows XP Professional 32-bit by recording "What You Hear".
It seems just a little bit of an oversight to have omitted this functionality on such a powerful and feature-packed system designed for multi-media.

I do run Audacity and I have tried to use this to record "What You Hear" on the HP Laptop. The only recording device shown in Audacity is Master. If I try to use this to record, it only picks up inputs from the inbuilt microphone and the externl microphone, if attached. Any sound coming out of the speakers is picked up by the inbuilt microphone and can be recorded in this way but that is, obviously, not satisfactory.
Another method would be to cable the earphone output to the external microphone input and disable or mute the built-in microphone. Again, this is hardly satisfactory.
I would have expected the audio detected internally to be available for recording, which it is not because I do not believe the IDT HD drivers present it.
In desperation, I have contacted IDT directly.
This is the sort of thing I have taken for granted, having had an excellent sound system on my desktop for years. It seems that Soundblaster takes some beating, both in terms of quality and technology. Perhaps HP would do well to consider this.

Soundcard with "what you hear" recording supp

Hello,
I'm looking for a soundcard with so called "what you hear" recording support under windows, so a possibility to record all audio going to speakers. Is there any model from creative supporting this feature, prefered an external model at USB/Firewire or internal with PCIe?
TIA for advice

Jamrock wrote:
Where abouts is this located? I can only see "Microphone, Line in, CD Player, Video, AUX, Stereo Mix, Mono Mix"
Which card/software you got there?
If you use "Creative Surround Mixer" --> you can set the .REC source by pressing the icon located above recording level slider.
If you can't see the "W-U-H" option listed there, then check if it's already selected (ear icon).
jutapa

Need 'What You Hear' recording option for Notebook(Vista)-Does Xi-Fi for Notebooks provide th

Hi,
I have an Audigy sound card on a Dell desktop and it has the "What You Hear" recording option within Vista. I need the same option for my Dell Notebook, unfortuntately, this notebook uses a Sigmatel card within the motherboard. What device or application to i need to buy in order to get the "What you Hear" recording option to be available?
What am i attempting to do?I often record li've webcasts in which the video portion comes through a Li've Meeting or Lotus Same time application using a Screen Recording Application?BUT the Audio comes from a conference which i use a VoIP software to dial into. I need to be able to record the sound that's been generated through my computer as an internal source. I need to be able to select 'What You Hear' as the default recording device so that the screen recording application i use can also record the audio been played through the PC?Appreciate any help here. Thanks?Kevin

If it'sis not a Creative card, "what u hear" will be called something different. Maybe "stereo mix" or something else. The device just records anything coming from the soundcard. Play around and see if you don't have something similar to "what u hear" with a different name.

What you hear recording sounds like Phase Shifter!

Hi, when I record with "What you hear (from youtube, etc.) it sounds like it came through a phase shifter: real bad. I have a dell xps 420 with Vista 32 bit and it'scame bundled with?creator premiere, adobe soundbooth, etc. Intel core tm2 quad cpu, 2.66 Ghz, memory 4GB
it seems to record ok with line in and mic. Can someone please help?

Actually, there's discussion about this all over the Internet.
The problem is your move to Vista and Windows 7
Under pressure from the record companies, the ability to record the Stereo Mix output of you computer has been disabled or removed from many new computers.
You may be lucky and find it's only been disabled on your machine. If so, then do the following:
To enable:
->> go to Control Panel
->> Hardware and Sound
->> Manage Audio devices
->> in the Recording tab window right click in the white area away from any devices and from the menu enable "Show Disabled Devices" and "Show disconnected devices"
->> right click on Stereo Mix to get the properties window and in Device usage "Use this device (enable)"
However, there have been many reports in here (you can do a search) that some computer manufacturers are actually removing this ability entirely, again under pressure from the record companies.
This being the case, you might try some software called Virtual Audio Cable: http://software.muzychenko.net/eng/vac.htm
You have to pay for it but at least there's a trial version so you can see if it works for you before laying out your money.
Bob

What you hear recording

27" iMac's Cirrus Logic HD Audio doesn't support a recording audio source usually called "Mixed Stereo" or "What you hear".
iMac's list of recording sources only includes SPDIF interface, Mic and Line In.
Why isn't there a Mixed Stereo or similar source. This is a basic feature of all soundcards. Please fix it.

Jamrock wrote:
Where abouts is this located? I can only see "Microphone, Line in, CD Player, Video, AUX, Stereo Mix, Mono Mix"
Which card/software you got there?
If you use "Creative Surround Mixer" --> you can set the .REC source by pressing the icon located above recording level slider.
If you can't see the "W-U-H" option listed there, then check if it's already selected (ear icon).
jutapa

Recording What You Hear

Does anyone know if there is a way to record what you hear with Audtion 3? I recently upgraded from Audition 1 when I upgraded my pc and os. I would like to be able to record streaming sound from the internet. I am using Vista (32 bit) and Windows 7 (64 bit)on the two computers that have Audtion 3 installed. Thanks for you input. This question seems to be unaswered on the internet.

Actually, there's discussion about this all over the Internet.
The problem is your move to Vista and Windows 7
Under pressure from the record companies, the ability to record the Stereo Mix output of you computer has been disabled or removed from many new computers.
You may be lucky and find it's only been disabled on your machine. If so, then do the following:
To enable:
->> go to Control Panel
->> Hardware and Sound
->> Manage Audio devices
->> in the Recording tab window right click in the white area away from any devices and from the menu enable "Show Disabled Devices" and "Show disconnected devices"
->> right click on Stereo Mix to get the properties window and in Device usage "Use this device (enable)"
However, there have been many reports in here (you can do a search) that some computer manufacturers are actually removing this ability entirely, again under pressure from the record companies.
This being the case, you might try some software called Virtual Audio Cable: http://software.muzychenko.net/eng/vac.htm
You have to pay for it but at least there's a trial version so you can see if it works for you before laying out your money.
Bob

Audigy board is recording in mono when using "what you hear" or "wave" m

Similar Messages

Maybe you are looking for