Audigy Driver Pack

Hello there,
as I'm beginning to be pretty pis*ed off by creative driver support I have decided to register here at forums where maybe I could find some Info.
And question...here comes:
Is there some uni'versal driver pack for soundblaster audigy () as there was for soundblaster li've? (I think it was named Li've Driver UniPack or smt. like that)
I'd like to have just one file for drivers and not the whole CD (that is 4 years old :-( ). Has anyone heard about some uni'versal driver pack for audigy?
Plz. help
Thanks forwards
Lord Madbrain

madbrain wrote:
Hello there,
as I'm beginning to be pretty pis*ed off by creative driver support I have decided to register here at forums where maybe I could find some Info.
And question...here comes:
Is there some uni'versal driver pack for soundblaster audigy () as there was for soundblaster li've? (I think it was named Li've Driver UniPack or smt. like that)
I'd like to have just one file for drivers and not the whole CD (that is 4 years old :-( ). Has anyone heard about some uni'versal driver pack for audigy?
Plz. help
Thanks forwards
Lord Madbrain
As what Cat say, install that driver and if you need to configure those sound card setting then search this filename - ctpanel.exe from within your computer

Similar Messages

Error when Installing Eax-console as part of Audigy support pack 3.6

<div class="lia-component-body lia-message-body">Hey there, out of nowhere I have the following problem:
I have used several versions of this audigy support Pack up to now, both in Windows XP and Windows 7 RC and all worked fine for me. Most recently I used 3.5 and 3.6 in both OS for a short time.
now I had to format my harddisk an have installed a clean version of Win XP SP3. I installed an update pack (winboard.org), the latest direct X and drivers for nvidia motherboard and videocard. Then, when I tried to install this support pack, I get an error messagge I-00 when eax-console should have been installed, something about CTengine being unable to be installed.
I read through many of the solutions here in the forum, since this error seems to be not so rare. But up to now, nothing helped. This is, what my install.log tells me:
[EAX Console]
GUID={5B7E626-7885-4FC3-A66A-73548A4F0FD}
Warning=I-008 CTRegSvr fails to register C:\Programme\Creative\EAX\Karaoke.exc.
[Common Audio Driver Interface]
GUID={700932B3-A964-4878-82A2-96054622AF7}
Warning=I-007 RegSvr32 fails to un-register C:\Programme\Creative\ShareDLL\CADI\ctcadi.dll.
All other install.log from the other parts of the pack contain no warning. Everything except the EAX-console works fine, if I try to start that, I get an error "No components are registered", an I don't have a "karaoke" register, but otherwise it works well, I can use the effects and cmss.
What the heck could I do?
I made an new thread, since nobody seamed to react to my post in the support pack thread.

HRe: Error when Installing Eax-console as part of Audigy support pack 3.6o What you have is a missing file, or perhaps your system is wanting to install direct X redistributable or something similar. Do a search on your system for install.log and when you find the newest one, or second to newest one, open it with notepad. It will tell you exactly what you are missing. I was trying to install some components for my Elite Pro and it said in the install.log that it could not find DXREDIST. So I copied a version I had to the installing program's folder and it worked!? So take a look at that log and see what is missing......write back with your results if you dont mind. In the original post I had seen the registration problems with components. You can manually run regsvr32 with the /? switch and see how to unregister that yourself and then try the installation again.
Cheers,
jmacguire

Audigy driver update iss

Hi.. i have an audigy 2 (OEM) i believe and i'm trying to do the auto update for the newest driver. Everytime i try though it tells me that no audigy card detected yet i've gotten all the other updates for it... can anyone help with my problem pls... thanks

burnt_crispies wrote:
Hi.. i have an audigy 2 (OEM) i believe and i'm trying to do the auto update for the newest driver. Everytime i try though it tells me that no audigy card detected yet i've gotten all the other updates for it... can anyone help with my problem pls... thanks
Download the updated drivers from Creative Support (or lateset WHQL drivers from http://www.station-drivers.com/)to your PC and try install them by running the CTZAPXX.EXE (found on the \Drivers\support\i386 -folder of your driver pack.
If didn't get drivers installed using that method, then goto HERE and follow the instructions.
.jtp

Audigy driver update = low effe

I have an Audigy and after update the drivers the effects sound very low (quiet). In fact at the environments effects the effects is applied just at the center speaker.But before update drivers all sound just fine. So, the updates are for better performance or for lower the performance? )

burnt_crispies wrote:
Hi.. i have an audigy 2 (OEM) i believe and i'm trying to do the auto update for the newest driver. Everytime i try though it tells me that no audigy card detected yet i've gotten all the other updates for it... can anyone help with my problem pls... thanks
Download the updated drivers from Creative Support (or lateset WHQL drivers from http://www.station-drivers.com/)to your PC and try install them by running the CTZAPXX.EXE (found on the \Drivers\support\i386 -folder of your driver pack.
If didn't get drivers installed using that method, then goto HERE and follow the instructions.
.jtp

I can't seem to remove a driver from a driver pack

As weird as it may sound this is what happens to me.
I use Config Mgr 2012, SP1.
I'm currently OSD'ing 6-7 different type of machines, one of those is the Lenovo T520.
I went to Lenovos site and picked up their drivers for this model for Windows 7 x64.
It aborted though during the task sequence, after downloading and applying windows, halfway through installing the driver pack
that I assigned for the model.
Error:
Windowsfailed to start.
A recenthardwareofsoftwarechangemightbethecause.
File:ifM63x64.sys
Status:0xc0000098
Info:Windowsfailed to loada requiredfileBecauseis missingor corrupt.
a bit of googling told me that several other people have had issues with this driver..
"Intel Ethernet FCoE Virtual Storport Miniport Driver Version 1.14.12.0"
The sites I checked seemed to have 100% succes rate by simply removing this specific driver from the package.
They also stated its not an essential driver.
So I completely deleted the driver from config mgr, and of course updated my driver package to the distribution point.
Then got the same error during task sequence
Thought that was pretty weird, to get an error on a driver that was now supposedly non existent..
So I googled some more and saw that some had issues with the driver pack did not actually update even though it said it did.
they fixed this by completely removing it and making a new one.
So I did the following:
1: Deleted the driver Pack
2: Went to the directory and made sure the driver pack had no files left on the server.
3: I created a brand new Driver Pack, I added all the drivers, without the previously deleted 'FCoE Virtual Storport miniport Driver'
4: I make sure the task sequence uses the correct new Driver Pack
And I still get the error. This is where I'm lost.. why am I still getting this error? the driver doesn't exist in SCCM anymore, and I even made a new package

How about this:
Delete the driver package and delete the folder that got created during the creating the driver package
Re-import the drivers for the model, make sure the FCoE driver isn't included in the source
Re-create driver package, distribute it to DPs
Apply Driver Package -step in TS, make sure it uses the new package and it's filtered with WMI (SELECT * FROM Win32_ComputerSystem WHERE Model LIKE '%TS520%' or something that works...)

Driver Pack No Longer Being Applied During Task Sequence

Hi all,
So... this week a really strange issue manifested itself. I've been trawling through logs for the last day and I don't seem to be getting anywhere.
A task sequence, which has been working for months and hasn't been changed, all of a sudden decided to start throwing error code 0x87D00269 yesterday. It was at the stage where applications that are installed during the task sequence started to
install.
So after a looking into the error, it seems the machines are unable to download the packages, possibly through not being joined to the domain. At this stage in the task sequence, the machine should definitely be joined to the domain. We have
the command support console enabled, so I hit F8 and tried to ping the MP and the DP. Nothing. Ran ipconfig, nothing listed under the adapter. Very odd. So I checked the NIC on the back of the machine and it was up, so I booted from the task sequence
media USB stick again and hit f8. Ran ipconfig and the machine had picked up an address from DHCP no problem and shortly after, the task sequences available to the machine loaded. So I started the task sequence again and it started fine, formatted
the disk, downloaded the W7 pro x86 image, applied it, downloaded the driver pack and seemingly applied the drivers (according to the task sequence), then the machine rebooted. It started to go through the installing drivers phase (the black screen
with the sunrise), which seemed to take a longer than normal. The machine rebooted and sat at the applying settings stage for a long while, which also seemed odd and I remarked the graphics drivers didn't seem to be installed because the screen resolution
was set really low. Of course at this stage, F8 doesn't work so I waited until just before the applications started to install again. Pressed F8, ran ipconfig and no IP address. So rather than wait for the task sequence to fail again, I manually powered off
the machine and powered it back on.
So the machine boots, still with the low resolution, comes to the login screen and at this point, it's clear the machine hasn't joined the domain. I logged in with local admin account and it became clear none of the drivers had installed from the driver
pack. This is a driver pack that has run absolutely fine for months and as far as I'm aware, nothing has changed so I'm a little bit confused as to why it would just stop working.
I can't see anything in the smsts log that would explain what's happening and I've looked through the dism log but I can't find anything relevant in there.
Any ideas on where to go? This is happening on multiple machines of the same type.

Hi,
0x87D00269 CCM_E_REQ_MP_NOTFOUND
Ran ipconfig, nothing listed under the adapter.
These evidence indicate that no network driver in boot image. Is this a customized boot image? Is the machine a new model?
Press F8, run wpeinit to initialize network. If this is not working, re-add driver to boot image and try again.
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]
Hi Daniel,
The boot image hasn't been modified and this machine is the exact same model as one built just a few weeks ago, with the exact same hardware. I know this because I've compared the hardware IDs of the devices side by side and they're identical.
I'm sorry but I don't follow. This issue only occurs after the driver pack downloads and (allegedly) applies. Up to that point, the machine has connectivity to the DP/MP and downloads and runs the first sections of the task sequence without issue. If I hit
F8 prior to the drivers being applied, I have my adapter listed and, of course, an IP address. That to me suggests the generic drivers already in the boot image work fine and don't need to be altered.

HP Client Platform Driver Pack Issue

I'm trying to import a HP Driver Pack for the Elite 8300. SP61385. It fails with 'The selected Softpaq is Not a valid driver softpaq'. Note: This is the first time I'm trying this. I must be missing a step...

You should post this on an HP forum.
Jason | http://blog.configmgrftw.com

Hard drive packed up, but had Time Machine backup. I installed new sad and upgraded to Mountain Lion., but I can't find iPhoto library and photos or iTunes songs? Is there an answer to this? Graham

Hard drive packed up, but had Time Machine backup. I installed new ssd and upgraded to Mountain Lion, but I can't find iPhoto library and photos or iTunes songs? Is there an answer to this? A backup run did not install either photos or songs. Graham

Thanks so much but none of that helped. It was driving me crazy because it would back up another external drive. I just changed the name of the drive from iPhoto/iTunes Library to Media Libraries and IT WORKED!! I guess for some reason it didn't like the drive being called iPhoto or iTunes ???? I don't understand but I have tried so many solutions and exchanging things out but the name change did it????!!!
Thank you for your help and replying to this. Guess I made my own issue!

Authentification when I want to download the driver pack for Equium L40

I already registered my laptop for the warranty, and i have a user name and password, but it seems that i need to register at that specific site from which I'm trying to download and that is a different page on which I didn't found any registration button. The driver pack I'm talking about it's for an Equium L40 10Z laptop. Any ideas ?
Message was edited by: mnemonik

No panic dude... it looks like a driver server issue.
I have read in this forum that some routine maintenance must be done.
I would recommend checking the driver page in next few days.

T430 SCCM driver pack not importing

I got the T430 driver pack and while I am importing it gives me an error.
Error: Some driver package(s) are updated successfully. But some are not.
Errors
Lenovo T430 x86 - The ConfigMgr Provider reported an error.
Error: Some driver package(s) are updated on distribution points successfully. But some are not.
Any ideas?
Thanks,
Jason

Could be related to this Microsoft KB article / hotfix:
http://support.microsoft.com/kb/978754
At least some network drivers require that hotfix to be installed. The driver pack itself works fine, just imported it a couple of days ago into one SCCM 2007 SP2 system.

HP Client WinPE Driver Packs and MDT 2013

Just today I noticed that HP had a couple of WinPE driver Packs for download on their site for WinPE 3.0 and 4.0. I'm using MDT 2013 to deploy Win 7 x64 for now, perhaps Win 8.1 out in the future. What version of WinPE does MDT make for Boot Images? Which
driver pack would be best for MDT 2013 and Win 7 deployment? WinPE 3.0?
Orange County District Attorney

Just found my answer in a great post at
http://www.deploymentresearch.com/Research/tabid/62/EntryId/112/MDT-2013-Lite-Touch-Driver-Management.aspx
Just in time!
Orange County District Attorney

SCCM Driver Packs for Windows 8

We have several SCCM driver packs for Windows 8 available now...
ThinkPad L430, L530
http://download.lenovo.com/ibmdl/pub/pc/pccbbs/mobiles/tp_l430-l530_w832_201210.txt
http://download.lenovo.com/ibmdl/pub/pc/pccbbs/mobiles/tp_l430-l530_w832_201210.exe
http://download.lenovo.com/ibmdl/pub/pc/pccbbs/mobiles/tp_l430-l530_w864_201210.txt
http://download.lenovo.com/ibmdl/pub/pc/pccbbs/mobiles/tp_l430-l530_w864_201210.exe
ThinkPad T430(s,i), T530(i), W530
http://download.lenovo.com/ibmdl/pub/pc/pccbbs/mobiles/tp_t430x-t530x-w530x_w832_201210.txt
http://download.lenovo.com/ibmdl/pub/pc/pccbbs/mobiles/tp_t430x-t530x-w530x_w832_201210.exe
http://download.lenovo.com/ibmdl/pub/pc/pccbbs/mobiles/tp_t430x-t530x-w530x_w864_201210.txt
http://download.lenovo.com/ibmdl/pub/pc/pccbbs/mobiles/tp_t430x-t530x-w530x_w864_201210.exe
ThinkPad X1 Carbon
http://download.lenovo.com/ibmdl/pub/pc/pccbbs/mobiles/tp_x1carbon_w832_201210.txt
http://download.lenovo.com/ibmdl/pub/pc/pccbbs/mobiles/tp_x1carbon_w832_201210.exe
http://download.lenovo.com/ibmdl/pub/pc/pccbbs/mobiles/tp_x1carbon_w864_201210.txt
http://download.lenovo.com/ibmdl/pub/pc/pccbbs/mobiles/tp_x1carbon_w864_201210.exe
ThinkPad X131e
http://download.lenovo.com/ibmdl/pub/pc/pccbbs/mobiles/tp_x131e_w832_201210.txt
http://download.lenovo.com/ibmdl/pub/pc/pccbbs/mobiles/tp_x131e_w832_201210.exe
http://download.lenovo.com/ibmdl/pub/pc/pccbbs/mobiles/tp_x131e_w864_201210.txt
http://download.lenovo.com/ibmdl/pub/pc/pccbbs/mobiles/tp_x131e_w864_201210.exe

Adding X230
http://download.lenovo.com/ibmdl/pub/pc/pccbbs/mobiles/tp_x230x_tablet_w832_201210.txt
http://download.lenovo.com/ibmdl/pub/pc/pccbbs/mobiles/tp_x230x_tablet_w832_201210.exe
http://download.lenovo.com/ibmdl/pub/pc/pccbbs/mobiles/tp_x230x_tablet_w864_201210.txt
http://download.lenovo.com/ibmdl/pub/pc/pccbbs/mobiles/tp_x230x_tablet_w864_201210.exe

SCCM Driver Pack for ThinkPad E550

>>> Moved to the proper forum

Hello, We're getting ready to deploy a cart of 30 ThinkPad E550 laptops. Does anyone know if there's an SCCM driver pack available for the E550? No sign of it on Lenovo's SCCM package index here:http://support.lenovo.com/us/en/documents/ht074984 If anyone knows where it's hiding, it would be a big help to us. Thanks!-HJ

What happened to new Vista Audigy Drive

Okay, so I check for new Vista drivers (with apps so I can use MIDI and soundfonts!) for my Audigy card every night. I was hopeful when X-Fi drivers were released last week. No Audigy drivers? Did I miss something? WILL there be new Vista 32 drivers with apps for Audigy cards or is CL abandoning them completely?
If CL goes down that path, what X-Fi cards will do MIDI with soundfont apps (like XP soundfont manager - loading soundfont banks into computer memory)?
Any help would be greatly appreciated. So much frustration!
Thanks,
RM

dear one and all! greetings to all who are breaking their head after buying vista and trying to make their 5. system woking. i downloaded the vista audigy driver from the support site of creative but i have lets say only 0 per cent of the performance. there is no 5. output, no add on drivers and no mixers , the usual hoopla hapla one gets while buying new hardware! i was wondering if the moderators could help me ! what shoud i do get 5. audio with vista and audigy. i already have the vista driver. it doesnt seem to help. please help! thanks in advance!

T410, T420 driver pack for MDT deployment

Is there a page where I can get the MDT driver pack for the T410 and T420 models? The current page (http://support.lenovo.com/en_US/downloads/detail.page?LegacyDocID=SCCM-INDEX) Does not have drivers for the anything older than a T430.
Solved!
Go to Solution.

Hi BDS_Vince, welcome to the forums,
Lenovo's first SCCM packs were first released for the T430 and other Think systems current at that time, please see following linked to thread;
http://forums.lenovo.com/t5/Enterprise-Management-IT/Introducing-ThinkPad-Driver-Packs-for-SCCM/m-p/...
As suggested on page 2 of that thread you could maybe use Update Retriever as an alternative method to manage drivers for older systems.
Andy ______________________________________
Please remember to come back and mark the post that you feel solved your question as the solution, it earns the member + points
Did you find a post helpfull? You can thank the member by clicking on the star to the left awarding them Kudos Please add your type, model number and OS to your signature, it helps to help you. Forum Search Option T430 2347-G7U W8 x64, Yoga 10 HD+, Tablet 1838-2BG, T61p 6460-67G W7 x64, T43p 2668-G2G XP, T23 2647-9LG XP, plus a few more. FYI Unsolicited Personal Messages will be ignored.
Deutsche Community Comunidad en Español English Community Русскоязычное Сообщество
PepperonI blog

Audigy Driver Pack

Similar Messages

Maybe you are looking for