Audigy driver update iss

Hi.. i have an audigy 2 (OEM) i believe and i'm trying to do the auto update for the newest driver. Everytime i try though it tells me that no audigy card detected yet i've gotten all the other updates for it... can anyone help with my problem pls... thanks

burnt_crispies wrote:
Hi.. i have an audigy 2 (OEM) i believe and i'm trying to do the auto update for the newest driver. Everytime i try though it tells me that no audigy card detected yet i've gotten all the other updates for it... can anyone help with my problem pls... thanks
Download the updated drivers from Creative Support (or lateset WHQL drivers from http://www.station-drivers.com/)to your PC and try install them by running the CTZAPXX.EXE (found on the \Drivers\support\i386 -folder of your driver pack.
If didn't get drivers installed using that method, then goto HERE and follow the instructions.
.jtp

Similar Messages

Audigy driver update = low effe

I have an Audigy and after update the drivers the effects sound very low (quiet). In fact at the environments effects the effects is applied just at the center speaker.But before update drivers all sound just fine. So, the updates are for better performance or for lower the performance? )

burnt_crispies wrote:
Hi.. i have an audigy 2 (OEM) i believe and i'm trying to do the auto update for the newest driver. Everytime i try though it tells me that no audigy card detected yet i've gotten all the other updates for it... can anyone help with my problem pls... thanks
Download the updated drivers from Creative Support (or lateset WHQL drivers from http://www.station-drivers.com/)to your PC and try install them by running the CTZAPXX.EXE (found on the \Drivers\support\i386 -folder of your driver pack.
If didn't get drivers installed using that method, then goto HERE and follow the instructions.
.jtp

Audigy 2 ZS, Driver update results in broken driver, no sound.

> I recently bought a used Audigy 2 ZS which works fine with the drivers from the CD. I don't know how old they are, Creative System Informations says driver version .82.0. That's why i wanted to update them. I had a Li've! before, so i knew how to update the drivers with the auto updater on the creative site. By the way, i did a clean up of the old drivers with Driver Sweeper before installing the new sound card.
When i do a driver update with the auto updater on the Creative website it downloads and install the newer drivers, but after the mandatory reboot i have no sound, and every Tool crashes, throws an error message or just doesn't work. I lose all my EAX effects and can't select any speakers. The only way to solve that is to uninstall everything and do a clean start with the CD.
I can update everything via the auto updater, except the drivers.
Using Audigy 2 ZS and Windows XP SP3
AMD Athlon XP 3200+
2 GB DDR-400 RAM
Geforce 6800GT 256MB

With XP I'm still using 2.8.000, they seem to work fine

10/09/06 driver update for Audigy 2

Has anyone installed the driver update put out today for Audigy 2 ZS? Any feedback on whether they are worth downloading would be appreciated.

You can install the file EAX4DRV_AUDIGY2__84_50.exe . Check under Support> Downloads, and fill that in the Search By Filename option. That file can be installed standalone (no previous drivers required).
Cat

Audigy 2 driver update fresh inst

Just did a fresh install of Win XP. Now I have two questions:
() Can I install the drivers and firmware directly from Creative, without using the original installation CD, and, if so, which of the many downloads do I choose? (Audigy2CMS PCAPP LB 3 0. . . .)??
(2) If it is advisable to use the original CD first, which of the update downloads do I use (if any) for the Audigy 2?
I find the download update lists leaves me with questions Having had issues slowly develop with the previous install of XP and Audigy, I wish to take advantage of this fresh XP install to install Audigy correctly.
Thanks, guys.
Joseph, in Oregon

Quinnjm,
It really depends on what you use. If you have a platinum dri've and use the remote then you will want to at least install MediaSource from the CD. Then you will only need to update file to MediaSource.
The only driver file you will need to install will be the second driver listed:
Sound Blaster Audigy 2 and Audigy 2 ZS Driver Update[/url]
This file will install with or without drivers and includes a file called CTPanel.exe that will allow you to configure your card. The file is located in c:\program files\Creative\SB Audigy 2\Program\Common\WDM
Jeremy

Audigy 2 & 4 Driver Update Faulty

I had a Creative Audigy 2 ZS Plat. Soundcard.
I recently re-formatted my PC, Installed the drivers from the CD, everything was absolutly fine, then I went onto the Creative Website and used the Auto-Update to update the drivers and software.
When installing the Driver update, it came up with a message saying that the driver could not be stopped, then it asked to restart, which it did, it then proceeded to install the driver, it then asked to restart windows again.
When windows reloaded, there was no sound,?on investigating why, the Sound Blaster was not listed as a soundcard under Sound and Audio Devices.
I looked in device manager and the soundcard was listed as a Multimedia Audio Controller with a yellow exclaimation mark next to it.
I've been able to get the sound card to work again by going onto the Windows Update website, it appeared as an update under hardware.
However when I play a DVD now, my DVD software allows SPDIF playback, it doesn't appear to send anything to my Creative Inspire Digital 5500 speakers, prior to my reformat, they switched to Dolby Digital mode, but now they don't and I get no sound at all.
So I tried downloading the Driver again and installing it, the same thing happened when it installed on my PC, in that it had to restart as it couldn't stop the device.
This time, when it did so, an add new hardware search for drivers window came up, looking for a "PCI Input device" I opted to search for drivers automatically, and it claimed it could not find any drivers, and now I get no sound again.
Luckily the Driver has appeared again in Windows Update, so I will be able to get sound again.
Does anyone know how to get the Driver update to install properly, is anyone else experienceing the same problems as me?

With XP I'm still using 2.8.000, they seem to work fine

RM 900 remote doesn't work after driver update

Hi!
After solving the proble of? "crackle, pops and noise" with a driver update for Audigy Platinum Ex, I see that my remote is no longer working, i've try reinstalling Remote Center from original drivers and applications CD and after a Volume Up or Down the Rear Left Speaker gives me no sound.
I've seen in others threads in the forum and they say about installing Media Source, but after installing it still doesn't work.
Any clue how to make it work again?
Using Windows XP SP3 and Audigy Platinum Ex.
Thank you again in advance.
PD: Excuse my poor english, it's not my nati've language.

Hello Jashue67,
Sorry to hear about all the trouble with the Apple TV. It sounds like you have done a restore but need to pair your Apple TV remote at this point. You can follow these steps to pair the remote:
Or, you can press and hold the Menu and Next/Fast-forward buttons on the white Apple Remote, or hold the Menu and right buttons on the aluminum Apple Remote, for 6 seconds to pair.
You can find the full article here:
Apple TV: Pairing and unpairing the Apple Remote
http://support.apple.com/kb/ht1555
Thank you for using Apple Support Communities.
Best,
Sheila M.

Problems with Driver update =( Any advi

I recently was advised that I had to update my soundcard drivers in order for an application to run correctly. I was directed to www.creativelabs.com to download the proper drivers. after I downloaded the drivers and launched the update I promptly received a message that says the setup has failed to detect a supported product on my system. I then did a repair install to add any potentially missing information, but when I launched the setup again I received the same message. I have a regular old Audigy Soundblaster that I purchased from Wal-Mart, can anyone offer any advice or assistance?Here's my dxdiag:?------------------
System Information
Time of this report: 8/24/2007, 8:56:55
?Machine name:
?Operating System: Windows XP Home Edition (5., Build 2600) Service Pack 2 (2600.xpsp_sp2_qfe.070227-2300)
??Language: English (Regional Setting: English)
System Manufacturer: Dell Inc
?System Model: Dimension E52
???BIOS: )Phoenix - Award WorkstationBIOS v6.00PG
??Processor: AMD Athlon(tm) 64 X2 Dual Core Processor 4400+,? MMX,? 3DNow (2 CPUs), ~2.3GHz
??Memory: 2046MB RAM
??Page File: 524MB used, 345MB available
??Windows Dir: C:\WINDOWS
?DirectX Version: DirectX 9.0c (4.09.0000.0904)
DX Setup Parameters: Not found
?DxDiag Version: 5.03.2600.280 32bit Unicode------------
DxDiag Notes
?DirectX Files Tab: No problems found.
??Display Tab : No problems found.
??Sound Tab : No problems found.
??Sound Tab 2: No problems found.
??Sound Tab 3: No problems found.
??Music Tab: No problems found.
??Input Tab: No problems found.
??Network Tab: No problems found.--------------------
DirectX Debug Levels
Direct3D:? 0/4 (n/a)
DirectDraw:? 0/4 (retail)
DirectInput: 0/5 (n/a)
DirectMusic: 0/5 (n/a)
DirectPlay:? 0/9 (retail)
DirectSound: 0/5 (retail)
DirectShow:? 0/6 (retail)---------------
Display Devices
??Card name: Radeon X300/X550 Series?
?Manufacturer: ATI Technologies Inc.
??Chip type: ATI Radeon Graphics Processor (0x783)
??DAC type: Internal DAC(400MHz)
?Device Key: Enum\PCI\VEN_002&DEV_783&SUBSYS_0302028&REV_00
?Display Memory: 256.0 MB
?Current Mode: 280 x 024 (32 bit) (60Hz)
??Monitor: Plug and Play Monitor
?Monitor Max Res: 600,200
??Driver Name: ati2dvag.dll
?Driver Version: 6.4.000.675 (English)
??DDI Version: 9 (or higher)
Driver Attributes: Final Retail
?Driver Date/Size: 7/27/2007 23:30:45, 26932 bytes
??WHQL Logo'd: Yes
?WHQL Date Stamp: n/a
???VDD: n/a
??Mini VDD: ati2mtag.sys
?Mini VDD Date: 7/27/2007 23:30:27, 237584 bytes
Device Identifier: {D7B7EE2-32C3-CF-A369-0823AC2CB35}
??Vendor ID: 0x002
??Device ID: 0x783
??SubSys ID: 0x0302028
??Revision ID: 0x0000
??Revision ID: 0x0000
??Video Accel: ModeMPEG2_C ModeMPEG2_D ModeWMV8_B ModeWMV8_A ModeWMV9_B ModeWMV9_A
?Deinterlace Caps: {6E8329FF-B642-48B-BCF0-BCB659E255F}: Format(In/Out)=(YUY2,YUY2) Frames(Prev/Fwd/Back)=(0,0,) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_PixelAdapti've
???{335AA36E-7884-43A4-9C9-7F87FAF3E37E}: Format(In/Out)=(YUY2,YUY2) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_BOBVerticalStretch
???{3C5323C-6FB7-44F5-908-056BF2EE449D}: Format(In/Out)=(NV2,0x323564e) Frames(Prev/Fwd/Back)=(0,0,2) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_PixelAdapti've
???{552C0DAD-CCBC-420B-83C8-74943CF9FA6}: Format(In/Out)=(NV2,0x323564e) Frames(Prev/Fwd/Back)=(0,0,2) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_PixelAdapti've
???{6E8329FF-B642-48B-BCF0-BCB659E255F}: Format(In/Out)=(NV2,0x323564e) Frames(Prev/Fwd/Back)=(0,0,) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_PixelAdapti've
???{335AA36E-7884-43A4-9C9-7F87FAF3E37E}: Format(In/Out)=(NV2,0x323564e) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_BOBVerticalStretch
??Registry: OK
?DDraw Status: Enabled
?D3D Status: Enabled
?AGP Status: Enabled
DDraw Test Result: Not run
?D3D7 Test Result: Not run
?D3D8 Test Result: Not run
?D3D9 Test Result: Not run-------------
Sound Devices
???Description: Sound Blaster Audigy
?Default Sound Playback: Yes
?Default Voice Playback: Yes
???Hardware ID: PCI\VEN_02&DEV_0007&SUBSYS_00A02&REV_00
??Manufacturer ID:
??Product ID: 00
???Type: WDM
???Driver Name: P7.sys
??Driver Version: 5.2.000.052 (English)
??Driver Attributes: Final Retail
???WHQL Logo'd: Yes
??Date and Size: 7/6/2005 20:4:30, 389056 bytes
???Other Files:
??Driver Provider: CREATIVE
??HW Accel Level: Full
???Cap Flags: 0xF5F
?Min/Max Sample Rate: 4000, 96000
Static/Strm HW Mix Bufs: 64, 63
?Static/Strm HW 3D Bufs: 64, 63
???HW Memory: 0
?Voice Management: Yes
?EAX(tm) 2.0 Listen/Src: Yes, Yes
?I3DL2(tm) Listen/Src: No, No
Sensaura(tm) ZoomFX(tm): No
???Registry: OK
??Sound Test Result: Not run???Description: Modem #0 Line Playback (emulated)
?Default Sound Playback: No
?Default Voice Playback: No
???Hardware ID:
??Manufacturer ID:
??Product ID: 8
???Type: Emulated
???Driver Name:
??Driver Version:
??Driver Attributes:
???WHQL Logo'd:
??Date and Size:
???Other Files:
??Driver Provider:
??HW Accel Level: Full
???Cap Flags: 0x0
?Min/Max Sample Rate: 0, 0
Static/Strm HW Mix Bufs: 0, 0
?Static/Strm HW 3D Bufs: 0, 0
???HW Memory: 0
?Voice Management: No
?EAX(tm) 2.0 Listen/Src: No, No
?I3DL2(tm) Listen/Src: No, No
Sensaura(tm) ZoomFX(tm): No
???Registry: OK
??Sound Test Result: Not run???Description: SigmaTel Audio
?Default Sound Playback: No
?Default Voice Playback: No
???Hardware ID: HDAUDIO\FUNC_0&VEN_8384&DEV_768&SUBSYS_0280ED&REV_ 002
??Manufacturer ID:
??Product ID: 00
???Type: WDM
???Driver Name: sthda.sys
??Driver Version: 5.0.543.0000 (English)
??Driver Attributes: Final Retail
???WHQL Logo'd: Yes
??Date and Size: 8/5/2006 04:00:8, 7464 bytes
???Other Files:
??Driver Provider: SigmaTel
??HW Accel Level: Full
???Cap Flags: 0xB5B
?Min/Max Sample Rate: 4400, 92000
Static/Strm HW Mix Bufs: , 0
?Static/Strm HW 3D Bufs: 0, 0
???HW Memory: 0
?Voice Management: No
?EAX(tm) 2.0 Listen/Src: No, No
?I3DL2(tm) Listen/Src: No, No
Sensaura(tm) ZoomFX(tm): No
???Registry: OK
??Sound Test Result: Not run---------------------
Sound Capture Devices
???Description: SigmaTel Audio
?Default Sound Capture: Yes
?Default Voice Capture: Yes
???Driver Name: sthda.sys
??Driver Version: 5.0.543.0000 (English)
??Driver Attributes: Final Retail
??Date and Size: 8/5/2006 04:00:8, 7464 bytes
???Cap Flags: 0x4
??Format Flags: 0xCC0???Description: Modem #0 Line Record (emulated)
?Default Sound Capture: No
?Default Voice Capture: No
???Driver Name:
??Driver Version:
??Driver Attributes:
??Date and Size:
???Cap Flags: 0x20
??Format Flags: 0x0???Description: Sound Blaster Audigy
?Default Sound Capture: No
?Default Voice Capture: No
???Driver Name: P7.sys
??Driver Version: 5.2.000.052 (English)
??Driver Attributes: Final Retail
??Date and Size: 7/6/2005 20:4:30, 389056 bytes
???Cap Flags: 0x4
??Format Flags: 0xFFF-----------
DirectMusic
??DLS Path: C:\WINDOWS\SYSTEM32\drivers\GM.DLS
?DLS Version: .00.006.0002
?Acceleration: n/a
??Ports: Microsoft Synthesizer, Software (Not Kernel Mode), Output, DLS, Internal, Default Port
????SigmaTel Audio, Software (Kernel Mode), Output, DLS, Internal
????Sound Blaster Audigy, Software (Kernel Mode), Output, DLS, Internal
????Microsoft MIDI Mapper [Emulated], Hardware (Not Kernel Mode), Output, No DLS, Internal
????Creative SoundFont Synth [Emulated], Hardware (Not Kernel Mode), Output, No DLS, Internal
????Microsoft GS Wavetable SW Synth [Emulated], Hardware (Not Kernel Mode), Output, No DLS, Internal
??Registry: OK
?Test Result: Not run-------------------
DirectInput Devices
??Device Name: Mouse
??Attached:
?Controller ID: n/a
Vendor/Product ID: n/a
??FF Driver: n/a??Device Name: Keyboard
??Attached:
?Controller ID: n/a
Vendor/Product ID: n/a
??FF Driver: n/a??Device Name:? 2400 Series
??Attached:
?Controller ID: 0x0
Vendor/Product ID: 0x043D, 0x00E9
??FF Driver: n/a??Device Name: Controller (XBOX 360 For Windows)
??Attached:
?Controller ID: 0x0
Vendor/Product ID: 0x045E, 0x028E
??FF Driver: n/aPoll w/ Interrupt: No
??Registry: OK-----------
USB Devices
+ USB Root Hub
| Vendor/Product ID: 0x0DE, 0x026D
| Matching Device ID: usb\root_hub
| Service: usbhub
| Driver: usbhub.sys, 8/4/2004 06:00:00, 57600 bytes
| Driver: usbd.sys, 8/4/2004 06:00:00, 4736 bytes
|
+-+ USB Human Interface Device
| | Vendor/Product ID: 0x046D, 0xC06
| | Location: Optical USB Mouse
| | Matching Device ID: usb\class_03&subclass_0
| | Service: HidUsb
| | Driver: hidclass.sys, 8/4/2004 06:00:00, 36224 bytes
| | Driver: hidparse.sys, 8/4/2004 06:00:00, 24960 bytes
| | Driver: hid.dll, 8/4/2004 06:00:00, 20992 bytes
| | Driver: hidusb.sys, 8/7/200 5:02:20, 9600 bytes
| |
| +-+ HID-compliant mouse
| | | Vendor/Product ID: 0x046D, 0xC06
| | | Matching Device ID: hid_device_system_mouse
| | | Service: mouhid
| | | Driver: mouclass.sys, 8/3/2004 23:58:34, 23040 bytes
| | | Driver: mouhid.sys, 8/7/200 4:48:00, 260 bytes
| |
+-+ USB Human Interface Device
| | Vendor/Product ID: 0x43C, 0x2005
| | Location: DELL USB Keyboard
| | Matching Device ID: usb\class_03&subclass_0
| | Service: HidUsb
| | Driver: hidclass.sys, 8/4/2004 06:00:00, 36224 bytes
| | Driver: hidparse.sys, 8/4/2004 06:00:00, 24960 bytes
| | Driver: hid.dll, 8/4/2004 06:00:00, 20992 bytes
| | Driver: hidusb.sys, 8/7/200 5:02:20, 9600 bytes
| |
| +-+ HID Keyboard Device
| | | Vendor/Product ID: 0x43C, 0x2005
| | | Matching Device ID: hid_device_system_keyboard
| | | Service: kbdhid
| | | Driver: kbdhid.sys, 8/3/2004 23:58:36, 4848 bytes
| | | Driver: kbdclass.sys, 8/3/2004 23:58:34, 24576 bytes----------------
Gameport Devices
PS/2 Devices
+ Terminal Server Keyboard Driver
| Matching Device ID: root\rdp_kbd
| Upper Filters: kbdclass
| Service: TermDD
| Driver: termdd.sys, 8/4/2004 02:0:08, 40840 bytes
| Driver: kbdclass.sys, 8/3/2004 23:58:34, 24576 bytes
|
+ Terminal Server Mouse Driver
| Matching Device ID: root\rdp_mou
| Upper Filters: mouclass
| Service: TermDD
| Driver: termdd.sys, 8/4/2004 02:0:08, 40840 bytes
| Driver: mouclass.sys, 8/3/2004 23:58:34, 23040 bytes----------------------------
DirectPlay Service Providers
DirectPlay8 Modem Service Provider - Registry: OK, File: dpnet.dll (5.03.2600.280)
DirectPlay8 Serial Service Provider - Registry: OK, File: dpnet.dll (5.03.2600.280)
DirectPlay8 IPX Service Provider - Registry: OK, File: dpnet.dll (5.03.2600.280)
DirectPlay8 TCP/IP Service Provider - Registry: OK, File: dpnet.dll (5.03.2600.280)
Internet TCP/IP Connection For DirectPlay - Registry: OK, File: dpwsockx.dll (5.03.2600.280)
IPX Connection For DirectPlay - Registry: OK, File: dpwsockx.dll (5.03.2600.280)
Modem Connection For DirectPlay - Registry: OK, File: dpmodemx.dll (5.03.2600.280)
Serial Connection For DirectPlay - Registry: OK, File: dpmodemx.dll (5.03.2600.280)DirectPlay Voice Wizard Tests: Full Duplex: Not run, Half Duplex: Not run, Mic: Not run
DirectPlay Test Result: Not run
Registry: OK-------------------
DirectPlay Adapters
DirectPlay8 Modem Service Provider: Conexant D850 56K V.9x DFVc Modem
DirectPlay8 Serial Service Provider: COM3
DirectPlay8 TCP/IP Service Provider: Local Area Connection - IPv4 ------------------------
DirectPlay Voice Codecs
Voxware VR2 .4kbit/s
Voxware SC06 6.4kbit/s
Voxware SC03 3.2kbit/s
MS-PCM 64 kbit/s
MS-ADPCM 32.8 kbit/s
Microsoft GSM 6.0 3 kbit/s
TrueSpeech(TM) 8.6 kbit/s-------------------------
DirectPlay Lobbyable Apps
Disk & DVD/CD-ROM Dri'ves
??Dri've: C:
?Free Space: 45.0 GB
Total Space: 235.2 GB
File System: NTFS
??Model: ST3250820AS??Dri've: D:
??Model: TSSTcorp DVD+-RW TS-H653A
?Driver: c:\windows\system32\drivers\cdrom.sys, 5.0.2600.280 (English), 8/4/2004 06:00:00, 49536 bytes

fro_fromthe80s wrote:
It's just a regular ol' Audigy
Actually your "regular old Audigy" is an Audigy SE,?Driver Name: P7.sys
is the Audigy SE driver, not the regular Audigy driver. The driver you want is this one,?http://us.creative.com/support/downl...ype=0&x=27&y=6?

Cant Install the latest 2 Driver Updates for Audig

Hello,
I cant install the latest drivers:
.Creative Sound Blaster Audigy unified series Beta driver with OpenAL support 2.08.0002
2.Creative Sound Blaster Audigy2 and Audigy2 ZS Driver Update .84.55
Setup is giving me error: "Setup Couldn't detect any Sound Blaster Audigy 2 on your system"
all other drivers previously to that are installed. (also installed EAX4 web update).
specs:
Audigy 2
Windows XP
024Ram
AMD 64bit
please advice what to do. thank you

alright, it seems to have worked.
thanx a bunch

Audigy Drive Not Working (Audigy 2 ZS Platin

I've got an Audigy 2 ZS Platinum.
I've used my Audigy Dri've before for recording stuff with my guitar and whatnot, and I've used my remote plenty. A long time ago my Dri've stopped working and I couldn't figure out why. After plugging and unplugging and driver uninstallation and reinstallation and driver updates and whatnot I cannot get the ****ed thing to work. Occasionally I would boot up and it would work just fine, then I'd reboot and it wouldn't.
I cant select Line-in 2 or any other port, they are non-existent in the volume levels window-thing, but appear when the dri've does decide to work.
I run the remote control program to select which remote or Dri've that is in use, but when the program starts, and a second or so goes by, it determines that it cannot connect to the Audigy Dri've and all the drop-down boxes get disabled and turn grey. the checkboxes at the top however still work. instead of turning gray and disabled when the dri've decides to work, it gives me options to choose from.
I just realized that when I first installed my drivers from the CD, I got an option to install using either the "Audigy ZS 2" or the "Audigy ZS 2 Platinum" and I'd check the appropriate box, but after uninstalling drivers, removing the audigy, booting to ensure all software and drivers are gone, shutting down, putting the hardware back in, booting, and installing the drivers again, I do not get the dialog box asking me to check either "Audigy ZS 2" or the Platinum.
My computer isn't detecting my Dri've. Why? and Why would it sometimes work and then refuse after rebooting? Loose connection? not a chance. Help!

If you'de be so kind, please scroll to the very top of this very page and read where it says "Customer Support Discussion Forums." Notice how "Discussion Forums" is a subcaregory of "Customer Support," and then notice the fact that the word "Support" is explicitly used. One could easily be leadto believe that these are Support forums -- hey, maybe that was intended.
If you need any more clarity than that, hover over that drop-down "Support" link in on the orange background at the top of this page. You see that link that says "Discusison Forums"? Guess what...
anyhoo, now that we're both done being jack asses, lets get friendly and get down to business. I was thinking in my head as I typed on about my long story that I should put in some system specs, but it sliped my mind. I appologize for that, I usually do. So here:
Tripple Booted Windows 98se, Windows 2000, Slackware Linux 0.2. The OS in question here is Win2k on an NTFS partition. two hard dri'ves (20gb and 80gb), Chaintech 9pjl2 motherboard, gig of ram on 4 256 sticks (who knows what brand, I really doulcn't care less), ATI Radeon 9800 Pro (like this should matter), Antec TruePower 550 watt, Acrylic Blue case (now I'm just losing focus) anyway, the most important stuff is there.
As I've mentioned before, I've reinstalled my drivers so many times that I cringe every time I hear the term. I'll do as you said with the links provided, and post here again later -- however, I doubt this will help anything. System Corrupted? err, thats a very broad term there, and I'm not sure what you mean by it. my machine and OSs work just fine, with this one exception.
Thanks for posting. :-)Message Edited by zeroth on 0-27-2005 07:43 PM

HP Laserjet 1200 and Driver Updates

On the "Download Drivers and Software" support page for the HP Laserjet 1200 printer, there is an option, "Automatically check to see if your driver needs updating".
A machine that I am supporting is having a MS Word collating issue (sometimes works, sometimes doesn't) and I don't know if its a driver issue or not. The machine is XP SP3.
If I click on this link, obviously it will check the drivers, but:
1) Will it give me the option to automatically update the drivers if it finds they are outdated, and
2) How do I roll back to the old driver if the update introduces problems?
Since this potential driver update isn't going through the normal MS XP driver update routine in Device Manager, I'm leery that I won't be able to recover if something goes wrong.

I am sorry, but to get your issue more exposure I would suggest posting it in the commercial forums since this is a commercial printer. You can do this at http://h30499.www3.hp.com/hpeb/
I hope this helps.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

NVIDIA GeForce 8600M GT driver update?

How is this done? I can update it in my Boot Camp installation running WinXP but how do I update it under MacOS X? Is it included in the regular OS updates or do I have to do something else? I noticed the other day that there's an update for the 8- series ( which would be what I have if I'm not totally mistaken ) among others.

I don't believe there are any driver updates for OS X.

Not able to add driver update during Solaris 10 installation on IBM x3550

I am facing a problem with installation of Solaris 10 on IBM x3550.
My question is not specific to IBM server.
I am trying to add SAS driver during Solaris 10 installation. I selected option "Apply device driver update" (option # 4). It is asking to insert driver disk. But only showing floppy (f) and cdrom (c).
IBM server 3550 doesnt have floppy drive and I have the driver image only in a USB stick. Unfortunately, Solaris 10 installation is not showing usb device during driver installation.
Is there any way we can add usb device to the driver update disk list??
Thanks in advance.

Does no one have an idea?

After the driver update 2.7 released by Apple I can not print on my Epson Stylus Photo RX650. Epson tells me it is apple's fault

After the driver update 2.7 released by Apple I can not print on my Epson Stylus Photo RX650. Epson tells me it is apple's fault.
This is the message from Epson:
The driver update 2.7 was released by Apple. The driver released by Epson is available for download from the Epson Australia web site. It is the Apple update driver download that has caused the problem.

After the driver update 2.7 released by Apple I can not print on my Epson Stylus Photo RX650. Epson tells me it is apple's fault.
This is the message from Epson:
The driver update 2.7 was released by Apple. The driver released by Epson is available for download from the Epson Australia web site. It is the Apple update driver download that has caused the problem.

Blank screen after display driver update Satellite Pro P200

I installed the latest ATI Mobility Radeon HD2600 display driver (8.432, from the Toshiba site via Tempo) on my Satellite Pro P200 yesterday. On rebooting everything looks fine as far as the Windows Vista Business "Please wait ..." screen, but instead of displaying the login page I get a blank screen (with a mouse cursor that moves around as normal). All I can do at this point is power off, and I've run out of ideas on how to get any further.
Things I've tried:
# booting into safe mode, low-resolution video or last known good configuration all result in the same blank screen.
# connecting to the system using remote desktop (to disable the driver) isn't possible because the system hasn't loaded the network drivers yet.
# I can't revert to a restore point because Vista can't find any (I made a manual one after installing windows updates on a couple of days ago).
I can run a command prompt from the system recovery options and would prefer to use that to disable the driver +if+ I knew how before resorting to the more drastic options.
A web search (http://www.google.co.uk/search?q=ati+catalyst+vista+blank+screen&hl=en&sa= N) reveals that this has happened on a wide range of laptops with
previous releases of the driver, but none of the links I've looked at give a solution that's available to me.

No joy with an external screen so I bit the bullet and reinstalled from the product recovery disk. I tried expert mode to retain the data partition but that failed twice, so I had to restore it from the previous day's backup after doing a full reinstall. Two consolations, though.
# It allowed me to increase the size of the data partition.
# The display driver update worked fine on the fresh install.
Needless to say I've since found [http://support.microsoft.com/kb/927525] which describes how you can disable a problem device driver (atikmdag in my case) from the system recovery command prompt :-(
Hopefully the instructions in there will help anybody who gets caught with similar problems.

Audigy driver update iss

Similar Messages

Maybe you are looking for