Audigy front panel (SB0010) driver.

Hello
My current PC has an old SB0090 card that is working perfect under Windows 7 64 bits, but now i need to find the? .
i hope someone can help..

Flatline,
They are compatible with each other; however this is not an officially supported connection. This means that technical support will not be able to assist you directly (over email or phone) if you encounter problems. Best to get the retail version instead of those OEM since OEM card may have different revision.Message Edited by Jason-CL on 05-6-2005 02:2 PM

Similar Messages

Audigy 2 card with Audigy Front Panel not worki

I've just bought a used audigy 2 card with an audigy front panel. I have installed everything and have sound from the card to my speakers.
The front panel has a blinking light on the optical out and when I plug headphones into the panel, I can hear static and control the volume of the static from the knob on the panel.
I can't hear anything else through the headphone jack and can't get any input signal using the line 2 input on the front panel.
Connections and drivers appear to be OK, am I missing something......
Thanks,Dave.

David,
If you go into the surround mixer or Windows mixer do you see a listing for the front panel inputs (line in2/mic in2, Aux 2, etc)? If so, are any of them muted? If you go to start/programs/Creative/SB Audigy/Audio HQ/Device Settings, do you show a headphone tab? If so what options are enabled in there?
Double check your ribbon cable connection and maybe even swap sides of the cable.
Jeremy

X-fi soundcard and audigy front panel compatibil

Hi,
Does anywone know whether one can use an old audigy front panel from the platinum edition together with the new x-fi soundcard?
thx,
Jo

Yes it does. A Creative Moderator on this site said it's compatible.....
I also tried it and it worked flawlessly ! I have both X-FI and Audigy ZS Platinum Versions.
<IMG height= alt="" src="http://forums.creative.com/i/p.gif" width= border=0>Re: X-Fi compatible with Audigy2 front panel?<A target=_blank>Options[/url] <IMG alt=Options src="http://forums.creative.com/creativelabs/i/button_options.gif" border=0> <IMG alt="" src="http://forums.creative.com/i/rank_icons/admin.gif" border=0>Catherina-CLAdministratorPosts: 3452Registered: 0--2004 <IMG height=8 alt="" src="http://forums.creative.com/i/p.gif" width=50 border=0><IMG height=36 alt=Catherina-CL src="http://forums.creative.com/creativelabs/i/icons/Moderator__Moderator/FM-orange.gif" width=36 border=2>
Viewed 39 times
<IMG height= alt="" src="http://forums.creative.com/i/p.gif" width= border=0>
They should be compatible, but it wouldn't be officially supported. Should work the same as the other dri've though.
Cat
Forum AdministratorCreative Labs<IMG src="http://images.americas.creative.com/images/local//signature/GET_CREATIVE_00.jpg">

Audigy front panel audio connectio

I have a audigy ls model and i was wondering if there is a way to connect this card to my cases front panel audio i/o's? does anyone know? i checked the web site and couldnt find anything either way.

Tricky0502 wrote:
I have a audigy ls model and i was wondering if there is a way to connect this card to my cases front panel audio i/o's? does anyone know? i checked the web site and couldnt find anything either way.
Yes it is possible --> http://audigy2zshowto.blogspot.com/
jutapa

Old Audigy Front Panel Compatible with Audigy 2 ZS c

Is the Audigy Platinum front panel compatible with the Audigy 2 ZS card..
kinTap

sry to bump.. but I would like to install the new card... will this work?

P35 Platinum front panel audio with Antec P180 case?

God I have a headache after reading all those "front panel audio" threads. Why can't mb's all use the same freaking pinouts!!!!
The case doesn't have a HD front panel.
MB pinouts are:
1. Mic_L (MIC Left Channel)
2. GND
3. MIC_R (MIC Right Channel)
4. PRESENCE#
5. LINEout_R (analog port right channel)
6. MIC_JD (MIC jack detect)
7. Front_JD
8. NC (empty)
9. LINEout_L (analog port left channel)
10. LINEout_JD
Case Front Panel connector is a preconfigured block with pigtails hanging off in case it doesn't match up.
1. MIC Signal
2. MIC Power (MIC BIAS)
3. Ground
4. FPOUT-R (front right)
5. FPOUT-L (front left)
6. RET-R (rear right)
7. RET-R (rear left)
glaring differences are the ground and the MIC connectors.
How do I connect these? I don't want to fry anything.
Thanks.

They do have the same pinouts. There are two standards is the reason for two different pinouts. It's just that your MB is Intel HD and your case is AC-97.
For Intel® High Definition Front Panel Audio
Pin Signal Name Description
1 PORT 1L Analog Port 1 - left channel (Microphone)
2 GND Ground
3 PORT 1R Analog Port 1 - right channel (Microphone)
4 PRESENCE# Active low signal that signals BIOS that an Intel® HD Audio dongle is connected to the analog header. PRESENCE# = 0 when an Intel® HD Audio dongle is connected
5 PORT 2R Analog Port 2 - right channel (Headphone)
6 SENSE1_RETURN Jack detection return for front panel (JACK1)
7 SENSE_SEND Jack detection sense line from the Intel® HD Audio CODEC jack detection resistor network
8 KEY Connector key
9 PORT 2L Analog Port 2 - left channel (Headphone)
10 SENSE2_RETURN Jack detection return for front panel (JACK2)
For AC-97 Front Panel Audio
Pin Signal Name Description
1 MIC Front panel microphone input signal (biased when supporting stereo microphone)
2 AUD_GND Ground used by analog
3 MIC_BIAS Microphone power / additional MIC input for stereo microphone support
4 AUD_GND Ground used by analog audio circuits
5 FP_OUT_R Right channel audio signal to front panel (headphone drive capable)
6 FP_RETURN_R Right channel audio signal return from front panel (when headphones unplugged)
7 AUD_5V Filtered +5 V used by analog audio circuits
8 KEY No pin
9 FP_OUT_L Left channel audio signal to front panel (headphone drive capable)
10 FP_RETURN_L Left channel audio signal return from front panel (when headphones unplugged)

Audigy 2 front panel: Aux-in 2 no longer wo

This is odd to me. I updated to Windows SP3 and it insisted on updating my realtek HD audio drivers which I had disabled. Upon restart they were reinitalized. I quickly turned them off, disabled, then uninstalled them.
I switched back to my Audigy 2 but my AUX-IN 2 no longer works, and no it's not muted. It's really frustrating since I have some multimedia streaming through those RCA's and I really need it.
I've tried to rip every audio driver out. I've reinstalled about 4 times. And it still doesn't work. I've tried old drivers, new drivers. No luck.
Do you think there could be some conflict inflicted by when both drivers were installed? Are there any apps to purge Realtek from my system? Does SP3 have something to do with it's? Please help!
Quick Edit: Everything else on the front panel works and the my cables are new. I bought them because I thought they were shot.
Message Edited by Spooty on 0-25-2008 02:3 PM

Thanks for the response. I've tried the program and it does work for the intended purpose; however, now I'm experiencing a new issue. Sometimes when Muvixer "kicks in" and changes the input back to my selection the computer will lock up. I'd say this occurs out of 25 times -- enough to make this a severe pain. The sound will freeze with repititous noises coming from the speakers and the computer will be completely non-responsi've. The only solution is to hard restart. I've got a fairly decent dual core rig @ 3.9ghz with a week-old reformat and clean Windows install, so I can only imagine this is an issue with the audigy.
Any suggestions?

Audigy 2 Platinum Front Panel Probl

Hello everyone. Thank you in advance for any help.
My problem is two-fold, let me begin with the first issues.
Critical Issue One: On my Audigy 2 Platinum neither the headphone jack nor the Line 2 in/Mic 2 in jacks appear to be at all functional. I can get no sound to go in or come out using them. Additionally, I don't see a volume slider to control either of them in the surround mixer. Is it possible somehow that the entire front panel is disabled? I looked inside my computer and it appears to be connected firmly (the AD_EXT cable is the only one connecting my sound card to anything internally). As a side note I have already tried doing a full, clean reinstall of the drivers, to no avail.
Issue Two: I can no longer auto update my drivers using Creative's site. I believe this is somehow related to IE7, it always functioned perfectly with IE6. When I try to update now the message I get is: "Some components are corrupted." I did a search in the knowledge base and followed the instructions to fix this problem (Deleting the Acti've X controls) but this does not resolve the issue (I also noticed by searching the forums that people with similar problems never found a resolution beyond "doing a manual driver install"). I believe that the acti've x controls that I am downloading get corrupted each time. Is it possible that someone could send me, fully functional non corrupted creative acti've x controls that I could install? Or is this simply an incompatibility between the creative site and IE7?

Hello everyone. Thank you in advance for any help.
My problem is two-fold, let me begin with the first issues.
Critical Issue One: On my Audigy 2 Platinum neither the headphone jack nor the Line 2 in/Mic 2 in jacks appear to be at all functional. I can get no sound to go in or come out using them. Additionally, I don't see a volume slider to control either of them in the surround mixer. Is it possible somehow that the entire front panel is disabled? I looked inside my computer and it appears to be connected firmly (the AD_EXT cable is the only one connecting my sound card to anything internally). As a side note I have already tried doing a full, clean reinstall of the drivers, to no avail.
Issue Two: I can no longer auto update my drivers using Creative's site. I believe this is somehow related to IE7, it always functioned perfectly with IE6. When I try to update now the message I get is: "Some components are corrupted." I did a search in the knowledge base and followed the instructions to fix this problem (Deleting the Acti've X controls) but this does not resolve the issue (I also noticed by searching the forums that people with similar problems never found a resolution beyond "doing a manual driver install"). I believe that the acti've x controls that I am downloading get corrupted each time. Is it possible that someone could send me, fully functional non corrupted creative acti've x controls that I could install? Or is this simply an incompatibility between the creative site and IE7?

Front panel of my Audigy 2 won't w

My front panel on my Audigy 2 won't work. I recently had to replace my motherboard and it won't work since then. It worked fine before. The mixer panel won't even give me the option of Line 2 and Auxilliary in, and my headphone jack won't work either. I don't think they're even getting power, though I'm not sure. I took the optical plug out to see if there was a red light showing, and there wasn't. The inputs and outputs from the back are operational.
I've read other threads on this and none of the solutions there have worked. I've re-connected cables, uninstalled and reinstalled hardware, and software. Still nothing. Only inputs from the back work. I recently had to replace my motherboard. I've tried updating drivers - nothing.
My motherboard is a GIGABYTE GA-K8NSC-939 Socket 939 NVIDIA nForce3 250Gb ATX AMD Motherboard. My processor is AMD Athlon 64 3000+ Venice GHz FSB 52KB L2 Cache Socket 939 Processor. I run Windows XP with both service packs installed (same as with my old motherboard).
Is my card broken?

There should be a light from the optical output as long as there is power to the dri've. Perhaps switch the power cable on that dri've with the cable that goes to your floppy, to see if that helps (in case the cable is faulty). It's possible otherwise that the dri've itself is broken.
Cat

Sound Blaster Audigy 4 Standard - Front Panel connectio

Can someone help me out with a front panel connection for a standard Audigy 4.
I have removed the connections form my motherboard as i was using onbaord sound, and i would like to connect them to my Audigy 4.
Please could someone post an image or a link to a website that can inform me on how to connnect the sound card to my frontpanel.
Regards

anyone?

Can I connect an Audigy 2 front panel to an X-Fi?

I have an older Audigy 2 Platinum with the front panel and an X-Fi Titanium Fatalty Pro card. I'd like to connect the front panel if possible because I don't think Creative even makes the front panels for the X-Fi cards anymore and they were always kind of expensi've.

The Titaniums use a different cabling system than the Audigy line did. You wont be able to connect the two........

Audigy SB 2 ZS Platinum Front Panel not working-HELP

Hey everybody. I'm new to this forum, but not to computers. I built my computer about 4-5 months ago, and here are my specs:
Ultra MS Blue Dragon
ASUS P5GD
Intel P4 Processor 3.0GHz
GB GeIL RAM
6600 GT 28MB Video Card
Samsung 20GB SATA HDD
Lite-On and NEC DVD Dri'ves
Ultra X-Connect 500 W PSU
Creative SB Audigy 2ZS Platinum
I got the 2ZS platinum from a friend, but I already had a regular 2ZS. I plugged in his front panel to my old 2ZS. The front panel did not work. I then got his 2ZS, just the sound card, and plugged in the front panel. It still did not work. I installed all the software and drivers, and nothing. My sound card works fine, it is just the front panel that doesnt work. Does anyone have any ideas?
Thanks a ton,
Derek
P.S. The AD_EXT Cable fell apart a couple of times, but we put it back together. Could that be a problem? If so, where can I get a new AD_EXT Cable?

ttt

Audigy 2 Platinum Front Panel

I just built a new custom machine and I want to use my audigy 2 plantium. My new case is black and the front panel is white. Can I just purchase a new front panel that is black? Or can I just change the white face plate? It looks like the white face plate just clips on. There is nothing wrong with the device other than its an eye sore. I looked on creative's website and could not find anything about replacement panels. I really do not want to buy a new X-Fi Platinum and spend $99 bucks on a backup computer, as I already have a X-Fi in my main system.
Thanks for the help.

Actually I'm having the same problem too here.
Did all the troubleshooting I could the only thing left is to test the AD_EXT cable.
Anyone able to give some advise on this?

Audigy 2 Platinum Front Panel Connecti

I recently began recording my band in our home studio. My mixing board is a Midas Venice 240 which has two balanced XLR outputs from the master bus. I am wondering what method I may use to connect this output to the /4" stereo input on the front panel of the Audigy 2 Platinum. If I just purchase a Y-adapter to combine the two channels into one XLR and then convert it to /4" TRS jack will both channels be preserved? Are there any sound quality issues that arise from this method of connection? I was hoping to get answers to these questions before wasting money buying unnecessary adapters.
Thanks

The BEST way to do this is to go to radio shack and buy two (yes 2) of their?XLR to /4" Impedence Matching Transformers, AND?one (yes )?dual /4" female TS (tip-sleeve) to single /4" male TRS (tip-ring-sleeve) "Y" cable. Unless your mixer also has /4" main outs as well as the XLR... then you can just use the Y cable and skip the transformers. Or you can use a /8" Y cable with the transformers (and stereo /4 to stereo /8 adapter) and go into the card's line in jack on the actual card. Which is how I did it for a year or more untill i got a firewire recording interface (and it worked darn good too with my Soundcraft mixer and some good microphones). Either way,?you need the transformers for optimal results. The reason is the mixer's output impedence and level doesnt match that of the soundcard's input... mixer will likely overdri've the card, or the signal will sound weak or noisy.. The transformers?are cheap and are darn handy for loads of recording functions, and will provide the Audigy with exactly the type of signal it needs, properly transformed from the mixer. If you do this, you can record ALL of the mixer channels IN STEREO with all the panning, effects, and levels preserved. If you have multitracking software like Cubase or similar, you can even record an individual instrument (or even 2 at once, one panned left, one right... each assigned its own track in your software), come back on a new track (or pair of tracks), and record a different instrumet (or 2) and build a multitrack recording one performance at a time. PS:? you CANNOT just hardwire the mixer outputs and combine them into a single channel. A mixer is needed to properly combine?signals. Don't do it
!!! Have fun... and rock on.PSS:? make sure your overall cable is as short as possible. If you must run it for more than 6 feet then run it in XLR mode and convert it very close to the computer. The non XLR section of cable is an antenna for noise. The XLR section will be shielded against noise. Also, the transformers are kinda heavy so do not plug them into somthing and allow them to hang in the plug becasue the hanging weight will ruin your jack. Its best to run cables to the transformers, allowing them to lay on the floor... in a safe place where they wont get stomped on.
Message Edited by ElectricUrinal on -28-200708:0 AM

Front Panel on Audigy 2 ZS Plati

Hi.
I have a SBAudigy 2 ZS Platinum, and just a few days ago, my front panel stopped working. I made no hardware changes or driver changes, it just stopped working. None of the inputs work, the optical lights arent on, the remote won't work. In the mixer, all the entries for the front panel inputs are absent, and the only ones that are there are the ones for the card inputs and system sound settings. Is the IDE Cable bad? Any help?

Yes, I've checked and checked and checked. The firewire isnt neccessary, so it is only 2 cables to check. I even flipped the ribbon cable around (card to platinum dri've, vice versa) and even used another 4pin mini power connector that was connected to my floppy dri've. I just gave up last night and almost ripped out the unit to return, but I was getting sleeping. Well, tonight when I got back to my system, rebooted b/c I needed to swap out a hard dri've, the sound came BACK. WFT?
Anybody else get same problems with their platinum dri've?

Audigy front panel (SB0010) driver.

Similar Messages

Maybe you are looking for