Audigy help please!!! Computer keeps crashin
I am running an AMD x2 4400+, Fatalty mobo, gig ram, ATI all in wonder X800XL video card and an audigy card... I was trying to record video/audio with my ATI card and it kept blue screening on me and would reboot my computer.. Also I have noticed that sometimes my soundcard will give up and when I am watching TV on the computer the sound will turn to fuzz.. After the last forced reboot, I did the microsoft error reporting and found this out,
Solution found: contact Creative Technology?, Ltd. to obtain the update
<B><FONT color=#6487dc size=2>Problem description</B>
Thank you for submitting an error report. The error was likely caused by:
<B>Ensoniq Sound Card Driver (E0KX2K.SYS)</B>
<B><FONT color=#6487dc size=2>Solution</B>
Ensoniq Sound Card Driver (E0KX2K.SYS) was created by <B>Creative Technology?, Ltd.</B>. Creative Technology?, Ltd. informed Microsoft that they have a solution available for the problem you reported. To learn more about the solution, Creative Technology?, Ltd. recommends that you visit the following website:
[url="http://www.creative.com/swupdate/oca/" target=New>http://www.creative.com/swupdate/oca/[/url]
After doing a check of my software, Creative says that I have the most up to date software.. So what gives?!?!? I cannot find anything about this sound card driver on creatives website... I did notice that both the video card and sound card have an IRQ of 8.. Does that matter?
yes it matters alot. video and sound card are big consumer of bandwidth....so it's best not to have them sharing same irq......try changing the soundcard to other slot.Message Edited by BadBoy on -28-2005 04:34 PM
Similar Messages
-
Help please connection keeps dropping!
Hi, so over the past weeks, days etc ive lost count! My connection keeps dropping. Was using the bt home hub 2.0 was getting all sorts of errors. After getting fed up my dad brings home a homehub 3.0 type b which got given to him brand new by a friend. So installed software etc using adsl by the way not infinity, over the past week the errors from the homehub 2.0 have gone but not this is popping up: 22:43:21,16 Jun. WAN Auto-sensing detected port DSL
22:43:21,16 Jun. WAN Auto-sensing last connection port: DSL
22:43:18,16 Jun. WAN connection WAN3_TR069_INTERNET_R_ATM1_0_38 connected.
22:43:18,16 Jun. PPP IPCP Receive Configuration ACK
22:43:18,16 Jun. PPP IPCP Send Configuration Request
22:43:18,16 Jun. PPP IPCP Receive Configuration Reject
22:43:18,16 Jun. PPP IPCP Receive Configuration NAK
22:43:18,16 Jun. PPP IPCP Send Configuration Request
22:43:18,16 Jun. PPP IPCP Receive Configuration Reject
22:43:18,16 Jun. PPP IPCP Send Configuration ACK
22:43:18,16 Jun. PPP IPCP Receive Configuration Request
22:43:18,16 Jun. PPP IPCP Send Configuration Request
22:43:18,16 Jun. PPP CHAP receive success: authentication ok
22:43:18,16 Jun. PPP CHAP Receive Challenge
22:43:18,16 Jun. PPP LCP Receive Configuration ACK
22:43:18,16 Jun. PPP LCP Send Configuration Request
22:43:18,16 Jun. PPP LCP Receive Configuration Reject
22:43:18,16 Jun. PPP LCP Send Configuration ACK
22:43:18,16 Jun. PPP LCP Receive Configuration Request
22:43:18,16 Jun. PPP LCP Send Configuration Request
22:43:16,16 Jun. QoS Rate cap set to 1.1Mbs
22:43:15,16 Jun. WAN connection WAN1_INTERNET_B_ATM2_0_35 connected.
22:43:15,16 Jun. DSL Link Up: Down Rate=18211Kbps, Up Rate=1071Kbps; SNR Margin Down=6.1dB, Up=6.4dB;
22:43:06,16 Jun. Client associated: IP 192.168.1.71, MAC 50:B7:C3:FD:26:29, host touchedbythehandofgod, Link Rate 72.2 Mbps
22:43:00,16 Jun. HTTP User admin login from 192.168.1.64 successfully.
22:42:49,16 Jun. HTTP User admin from 192.168.1.64 login failure.
22:42:35,16 Jun. WAN connection WAN1_INTERNET_B_ATM2_0_35 disconnected.[ERROR_NO_CARRIER]
22:42:35,16 Jun. HTTP User Basic login from 192.168.1.64 successfully.
22:42:33,16 Jun. PPP LCP Send Termination Request
22:42:33,16 Jun. OpenWiFi tunnel down
22:42:31,16 Jun. WAN connection WAN3_TR069_INTERNET_R_ATM1_0_38 disconnected.[ERROR_NO_CARRIER]
22:42:31,16 Jun. DSL Link Down:the duration is 35 seconds [1 : LosDetector]. Can some one please help I'm not the account holder and my mum will not call bt as I'm sure as lots of people know the India call center are not the best, my mum is account holder by the way sorry about how this has come out I'm writing this off my iPhone as the connection has dropped a lot today. Any help is appreciated many thanks.Hi Welcome to the community forums
Here is a basic guide to getting help from the community members done by CL Keith Please read through the link posted http://forumhelp.dyndns.info/speed/first_steps.html
once you have posted the information asked for then the community members can help you more
Thank You
This is a customer to customer self help forum the only BT presence here are the forum moderators
If you want to say thanks for a helpful answer,please click on the Ratings star on the left-hand side If the reply answers your question then please mark as ’Mark as Accepted Solution’ -
About a month ago, the "beach ball" appeared on my screan. I rebooted the computer only to a blue screen. Was instructed to Safe Boot and repair my files. I got the computer to let me in. My only problem now is, when i open the mac, my hard drive does not make the wake up noise? Im not so computer savey so im not sure what im experiencing. My mac also sees the "beach ball" on occasion followed by it freezing and me having to hard reboot it. What am i experienceing?! Also when computer is booting up, a black screen with white lettering jimbo-jamble appears for a solid 30 seconds to a minute. I am worrying because my macbook was bought refurbished about a year ago, never had ANY problems, and JUST LIKE THAT...i got a world of issues.
My mac also sees the "beach ball" on occasion followed by it freezing
Troubleshoot the spinning beach ball
Also when computer is booting up, a black screen with white lettering jimbo-jamble appears for a solid 30 seconds to a minute.
Kernel Panics? Don't panic too!
"You need to restart your computer" (kernel panic) message appears (Mac OS X v10.5, 10.6)
I dont have a Apple store around me. Nearest is around 5 hours away.
Apple stores are not the only places that repairs Macs. Check to see if there is an AASP closer to you - How to find your nearest Apple Authorized Service Provider (AASP) -
Computer keeps restarting after installing windows 8
Can you help my computer keeps restarting after I installed Windows 8? I have the minidump file zipped
We do need the actual DMP file as it contains the only record of the sequence of events leading up
to the crash, what drivers were loaded, and what was responsible.
You may be able to get the DMP files without crashing by booting into safe mode (F8) with networking.
If you are overclocking stop. (chances are if you dont know if you are, you are not)a
To enable us to assist you with your computer's BSOD symptoms, upload the contents of your "\Windows\Minidump" folder.
The procedure:
* Copy the contents of \Windows\Minidump to another (temporary) location somewhere on your machine.
* Zip up the copy.
* Attach the ZIP archive to your post using the "paperclip" (file attachments) button. (if available on your site, MS doesnt have this)
*Please upload them to a file sharing service like Skydrive or"Rapidshare" and put a link to them in your reply.
Link for how to upload below.
http://www.wikihow.com/Use-SkyDrive
To ensure minidumps are enabled:
* Go to Start, in the Search Box type: sysdm.cpl, press Enter.
* Under the Advanced tab, click on the Startup and Recovery Settings... button.
* Ensure that Automatically restart is unchecked.
* Under the Write Debugging Information header select Small memory dump (256 kB) in the dropdown box (the 256kb varies).
* Ensure that the Small Dump Directory is listed as %systemroot%\Minidump.
* OK your way out.
* Reboot if changes have been made.
Please also run MSinfo32 and upload the output as well.
To run MSinfo32 please go to start>run>MSinfo32
Go to "file" "save" and upload the saved file with the DMPS
(Instructions for XP, Vista, Win 7, Win 8)
System specs are often useful so include whatever you know
Dyami & Wanikiya ...Team ZigZag. -
I need help please I keep getting error messega 21 when i try uploading my iPhone 4 s!!!!!!!!! omg some one please tell me if and how to fix this please. thank you!!!
Hopefully this link will help you: http://support.apple.com/kb/HT2109
-
Macbook pro (2010) Powers off everytime i close the screen.HELP PLEASE
Macbook pro (2010) Powers off everytime i close the screen, used to go into hibernate but now it powers off....HELP PLEASE
Computer is just over a year old and this is the first problem i have ever had, Nothing has changed in the power saver settings, and its getting frustrating everytime i go to use it i need to power it on and it always seems that it takes awhile before it finnaly realizes to turn on when pushing the button.So apparntly it is not turning off, however the screen is just not coming back on once i open the lid. so i push the power button, it shuts down then i press it again and it restarts. software or hardware error?
-
I have system preferences > general > homepage and search engine set as google but my computer keeps using BING! Please help!
You installed the "Genieo/InstallMac" rootkit. The product is a fraud, and the developer knowingly distributes an uninstaller that doesn't work. I suggest the tedious procedure below to disable Genieo. This procedure may leave a few small files behind, but it will permanently deactivate the rootkit (as long as you never reinstall it.)
Malware is constantly changing to get around the defenses against it. The instructions in this comment are valid as of now, as far as I know. They won't necessarily be valid in the future. Anyone finding this comment a few days or more after it was posted should look for more recent discussions or start a new one.
Back up all data. You must know how to restore from a backup even if the system becomes unbootable. If you don't know how to do that, or if you don't have any backups, stop here and ask for guidance.
Step 1
In the Applications folder, there should be an item named "Genieo". Select it and open the Finder Info window. If it shows that the Version is less than 2.0, download and install the current version from the genieo.com website. This may seem paradoxical, since the goal is to remove it, but you'll be saving yourself some trouble as well as the risk of putting the system in an unusable state.
There should be another application in the same folder named "Uninstall Genieo". After updating Genieo, if necessary, launch "Uninstall Genieo" and follow the prompts to remove the "newspaper-style home page." Restart the computer.
This step does not completely inactivate Genieo.
Step 2
Don't take this step unless you completed Step 1, including the restart, without any error messages. If you couldn't complete Step 1, stop here and ask for instructions.
Triple-click anywhere in the line below on this page to select it:
/Library/Frameworks/GenieoExtra.framework
Right-click or control-click the line and select
Services ▹ Reveal in Finder (or just Reveal)
from the contextual menu.
If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination command-C. In the Finder, select
Go ▹ Go to Folder...
from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return.
A folder should open with an item named "GenieoExtra.framework" selected. Move that item to the Trash. You'll be prompted for your administrator password.
Move each of these items to the Trash in the same way:
/Library/LaunchAgents/com.genieo.completer.update.plist
/Library/LaunchAgents/com.genieo.engine.plist
/Library/LaunchAgents/com.genieoinnovation.macextension.plist
/Library/LaunchDaemons/com.genieoinnovation.macextension.client.plist
/Library/PrivilegedHelperTools/com.genieoinnovation.macextension.client
/usr/lib/libgenkit.dylib/usr/lib/libgenkitsa.dylib
/usr/lib/libimckit.dylib
/usr/lib/libimckitsa.dylib~/Library/Application Support/com.genieoinnovation.Installer~/Library/LaunchAgents/com.genieo.completer.download.plist
~/Library/LaunchAgents/com.genieo.completer.update.plist
If there are other items with a name that includes "Genieo" or "genieo" alongside any of those listed above, move them as well. There's no need to restart after each one. Some of these items will be absent, in which case you'll get a message that the file can't be found. Skip that item and go on to the next one.
Restart and empty the Trash. Don't try to empty the Trash until you have restarted.
Step 3
From the Safari menu bar, select
Safari ▹ Preferences... ▹ Extensions
Uninstall any extensions you don't know you need, including ones called "Genieo" or "Omnibar," and any that have the word "Spigot" or "InstallMac" in the description. If in doubt, uninstall all extensions. Do the equivalent for the Firefox and Chrome browsers, if you use either of those.
Your web browser(s) should now be working, and you should be able to reset the home page and search engine. If not, stop here and post your results.
Make sure you don't repeat the mistake that led you to install this software. Chances are you got it from an Internet cesspit such as "Softonic" or "CNET Download." Never visit either of those sites again. You might also have downloaded it from an ad in a page on some other site. The ad has a large green button labeled "Download" or "Download Now" in white letters. The button is designed to confuse people who intend to download something else on the same page. If youever download a file that isn't obviously what you expected, delete it immediately.
You may be wondering why you didn't get a warning from Gatekeeper about installing software from an unknown developer, as you should have. The reason is that the Genieo developer has a codesigning certificate issued by Apple, which causes Gatekeeper to give the installer a pass. Apple could revoke the certificate, but as of this writing, has not done so, even though it's aware of the problem. It must be said that this failure of oversight is inexcusable and has seriously compromised the value of Gatekeeper and the Developer ID program. You cannot rely on Gatekeeper alone to protect you from harmful software.
Finally, be forewarned that when Genieo is mentioned on this site, the developer sometimes shows up under the name "Genieo support." If that happens, don't believe anything he says, but feel free to tell him what you think of his scam. -
Help
I upgrated my computer to OS X Mountain Lion last night and since then my computer keeps restarting over and over again. The only way I can use it is by being in Safe Mode. Can you please tell me what I need to do so my computer works perfectly again.
Thank youIf you have more than one user account, you must be logged in as an administrator to carry out these instructions.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Select the most recent panic log under the heading System Diagnostic Reports on the left. If you don't see that heading, select
View ▹ Show Log List from the menu bar. Post the entire contents of the panic report — the text, please, not a screenshot. In the interest of privacy, I suggest you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header and body of the report, if it’s present (it may not be.) Please don't post shutdownStall, spin, or hang reports. -
I am trying to sync my music from my computer to my iphone 6 but my computer keeps bringing up an error box "computer not authorized" but it is authorized. Please help!
I have a pc and am trying to get my music through my iTunes on my computer. I didn't have any trouble syncing my iphone 5S but can't get it to sync with my 6. OS 8.1.3
I open iTunes on my pc, plug in my phone, then I click on the picture of a phone on the upper left hand corner of my music library. Then I get a box of options with sync at the lower right. I have clicked "automatically sync when phone is plugged in" and have also tried to do it manually by checking specific songs and albums. Every time I hit sync the box pops up that says, "The iPhone could not be synced because this computer is no longer authorized for purchased items that are on this iPhone. To authorize this computer for items purchased from the iTunes store choose Store>Authorize This Computer."
I took those steps and a box pops up that says "this computer is already authorized."
I have my recently purchased music on my phone that came through the cloud when I restored my phone. But I want my old music from CD's that I put on my iTunes library in my computer. I had all of this music on my old phone.
Thank you so much for your time! I'm obviously not very good at this! -
My computer keeps saying "The iTunes Library.itl file is locked, or you do not have write permission for thsi file." I am running iTunes 10.5 on a windows 7 computer. PLEASE HELP!!!
sorry, i don't have the answer, but i think i have the same problem if i may expound:
I did a windows 7 update.... and today i tried to modify some song info in iTuens... I selectd an album with 12 songs in it, right clicked for "Get Info" tied to update album info including year, album artist, etc... but it would not take. I checked the security setting in the windows folder and confirmed i had admin rights etc...still no go... -
HELP PLEASE! I am working with GH4 4k footage in adobe preimere and the computer keeps freezing... any ideas?
Thanks for your response. I'm sorry for the lack of details, but posting a question on this forum is completly new to me, so I guess I am learning how it works.
I have to be honest, I am a novice to video editing, but I am here to learn so I will provide all the info I know and please let me know if it is enough...
I filmed my first feature film on a Panasonic GH4. We filmed in 4k (compressed files). I am about 900 GB of total files for all the footage. I am currently editing on a 17' Toshiba Satellite i7 with 750 GB of space and I believe 8 gb of ram. All of the footage for the film is not on the computer, but stored on a 1 TB external hardrive (Rugged Lacie is the name of the hard drive). I am using a usb 3.0 from the hard drive to the computer.
I actually was able to get through about 17 mins of edits for the film before I started to experiencing the computer completely freezing up on me. I tried using a different hard drive, and same issue. A friend mentioned it might just be the computer is not powerful enough to edit all the footage, but he wasn't for sure considering the computer is less than a year old and is on the higher end for a toshiba.
I am requesting advice on how to continue editing the film without the computer crashing if that is even possible with using the same computer. If not what would be my options?
Thank you! -
I know my passcode is correct but when I try to reset my iPad mini it keeps asking for a passcode! have tried restoring, connecting to iTunes and looked for the 'set up as new iPad' notification, but nothing is working? can anyone help please?
If the iPad was running iOS 7, iCloud: Find My iPhone Activation Lock in iOS 7
http://support.apple.com/kb/HT5818
How can I unlock my iPad if I forgot the passcode?
http://www.everymac.com/systems/apple/ipad/ipad-troubleshooting-repair-faq/ipad- how-to-unlock-open-forgot-code-passcode-password-login.html
iOS: Device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212
How can I unlock my iPad if I forgot the passcode?
http://tinyurl.com/7ndy8tb
How to Reset a Forgotten Password for an iOS Device
http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
Using iPhone/iPad Recovery Mode
http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
Saw this solution on another post about an iPad in a school environment. Might work on your iPad so you won't lose everything.
~~~~~~~~~~~~~
‘iPad is disabled’ fix without resetting using iTunes
Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
2. Open iTunes with the iPad disconnected.
3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
5. Click ‘Setup as new iPad’ and then click restore.
6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
8. The first stage in the restore process unlocks the iPad, you are basically just cancelling out the restore process as soon as it reactivates the iPad.
If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
~~~~~~~~~~~~~
Try it and good luck. You have nothing more to lose if it doesn't work for you.
Cheers, Tom -
Itunes doesn't list all of my recent podcasts. My show is Black Tribbles and it only shows episodes through March 2013, however we do at least two shows a week and they aren't listed. The feed works because the show update to my computer. Help please.
Your feed is at http://blacktribbles.podomatic.com/rss2.xml
When subscribed to in iTunes the recent episodes show, but the Store hasn't updated for some time.
There appears to be an issue with the feed. In the episode 'WRESTLING MARCH MADNESS: Final Bracket & Championship' of 31st March you will find in the 'description' tag the following line:
4. KURT ANGLE
At the end of this line is an invisible character which seems to be wrecking the feed - although it works OK when suscribing in iTunes it won't load in a browser (and I also found the feed very slow to load, which won't help matters with the Store)
This sort of thing usually happens when you paste text in from a word processing application and manage to include one of the invisible control characters. I don't know how easy it will be do do it in Podomatic but you should delete that entire line and retype it to remove this charter.
You should keep an eye on the time it takes the feed to be accessed - if there is a long enough delay (and it was quite some seconds when I tried) the Store may well timeout and fail to read it. At the moment it's showing a cached version from the last time it was able to read it. -
All of my playlists made on my Ipod touch 3rd gen keep disappearing when I sync it to itunes. Drivng me crazy. All software up to date on both itunes and Ipod. Help please.
I tend to make my playlists right on my ipod. This did not happen for the last 2 years. Just started recently. Did get a new computer recently.That is because you got a new computer. You can only sync all media from one syncing computer. You can sync from any computer to iPod using the manual method but that does not sync from iPod to computer.
To make this your syncing computer:
Syncing to a "New" Computer or replacing a "crashed" Hard Drive: Apple Support Communities -
My ipad keeps crashing and this time it won't come back on it just keeps telling me to connect to itunes which I did and it just keeps telling me it can't restore this ipad because an error has occured! Really need help please?
If it keeps coming up with an unknown error - no error code given - try another computer. If that doesn't work, it's time to take it to an Apple Store or an authorized service center to have the device evaluated.
Maybe you are looking for
-
Intercompany FI customer/vendor invoice clearing F-32
Hello, In ECC 6.0, we created Customer (DR) and Vendor (KR) invoices using FI transaction. When we clear Customer/Vendor using F-32, the invoices get cleared, but the process produces intercompany document (AB) as a open item on both Customer and Ve
-
Textfields in advanced search from LOV non-editable
I have a LOV where the textfields in advanced search are always non-editable. When I look into the LOV JSP page, maxlength of the textfields is 0. One of the textfields uses following attribute: in EntityObject: attribute "Kuerzel", type "String" (da
-
How do I get 128-bit encryption in Firefox 4.0 for a financial website?
I need 128-bit encryption capability on my web browser in order to use a specific financial website for bill paying, The site's encryption test shows that Firefox 4.0 (newly installed) does not provide that level of security. Help?
-
When I try to play a movie I rented on my computer it says Could not play the rental because it is authorized to play on another computer or device. Do you know why it says that?
-
Single patron for Mac, Linux (still with seperate swap), and Windows 7...
Ok, because I have a small SSD and space is getting wasted by 4 patrons on my disk, does somebody know how to consolidate the meat of the OSs onto one patron (prob. NTFS since all can read/write).