Audigy not holding audio settings in control pa

Hi all
I have an oem SB audigy but was unable to read my sb install disk when it came to reinstall of XP. I managed to get some drivers from creative and install them. The problem I have is with the lack windows sounds and no midi. The settings within control panel for Audio Midi & voice play back are both blank. The options are there but they will not hold the changes when you exit the sound properties. Generally all sound works but not the things like the War of the worlds video on apples website and of course midi. Also most games work for instance GTA SA but not HItmans sound effects.
I hope this makes sense if anyone can any one help me with this problem I would be very appreciati've.
Cheers
Socomwet

Only can change channel numbers and what channel the RF output is set to on the DCT-700. Absolute bare bones, SD only box.
If a forum member gives an answer you like, give them the Kudos they deserve. If a member gives you the answer to your question, mark the answer as Accepted Solution so others can see the solution to the problem.

Similar Messages

CS 5 not holding print settings

Weird issue... When customizing my print settings for a print job none of my settings hold when I go back into print. Anyone else having this issue? It's very frustrating when have to print 6 jobs right away and I have to manually set the parameters again. I have a few other machines that are holding the settings but not mine. Thanks!

Keep in mind print settings are stored in the PSD document, so you may be thinking it's not remembering your print settings, when in fact it's rememebering them a different way... In other words, if you print document 1 to printer A then save as a PSD, then print document 2 to printer B then save as PSD, then re-open document 1, the default printer for document 1 will still be A.
Another known problem with some printer drivers is that you have to set the parameters twice in order to get them to stick. This could affect, for example, then number of copies to print. A workaround is to make your changes, then go through the [Print Settings...] button twice (first time to make changes, second time to check the changes).
Hope this helps!
-Noel

User Print templates will not hold Print Settings Presets

User print templates set up for different papers will not remember/hold Print Settings Presets

Jeff,
You are correct it does work, I added a step not needed - I created a Preset on the Print Setting page, I should have left that as Default, it works that way. How pleasant to get a response from you, I just watched Camera to Print & Screen #39 Print from Lightroom this morning where I learned about Print templates. Thanks so much.

Finder-Not holding view settings in the Application Folder

Hi all
I wonder if any of you can help me.
I cannot get finder to hold my view settings in the Applications folder. I have tried all the view options and whenever I relaunch Finder or reboot the machine, it loses the view settings and goes back to 'arrange' and 'sort' by 'none' I have tried creating another user account and it does the same thing so it is
not user specific. I have tried deleting the .ds.store file in the Applications folder and this does not work. As a matter of interest, this has been an ongoing problem that I have noticed when setting up new Macbook Pros over the last two years or so.
All other folders hold their settings. Its just the Applications folder.
Any ideas folks?

I've had this issue in many folders. Very frustrating!

Nesting does not retain audio settings

This one has me stumped. I am working on a project that is being built in segments. As the segments are built I am nesting to later bring them for the final output. One and only one of the nested sequences is giving me trouble.
Each of the nested sequences has one audio track, mono for VO. All other show two lines of audio when the sequence has been saved as a nested item. When this one is saved it too shows that it has two audio tracks and plays back fine until you take it out of the timeline and then try to re-import it, magicly only one of the tracks appears and only plays back on the right channel. In the browser it does show two outputs just like the rest do but will only pull one in the timeline.
Anyone have a clue what I'm doing wrong or have had a similar experiance?
Thanks in advance
Mac Pro 2.66 Mac OS X (10.4.9)

Something silly you might check is to load the nest into the viewer and check to see that both channels aren't panned right.
Usually when I get stuff like this it's a render issue which is why I suggested making sure all of your audio is 48k and not needing a render.
Also, like Steve suggested if your audio is all mixed down it shouldn't be doing that.
Worst case scenario - can you select all and copy paste your sequences into a final sequence instead of bringing the nests in?

G3 Not holding PRAM settings - Battery replaced

This is a follow on from yesterday. Grant Bennet got me up and running again but my G3 doesn't seem to be holding the PRAM settings. I'm running OSX 10.3.9 on a G3 with 512 ram. Yesterday my monitor was saying out of range and the G3 wouldn't boot up. Grant explained how to reset the PRAM and this worked much to my releif. I've replaced the internal battery and checked the monitor frequency in system preferences but when I shut the G3 down and restart I'm back where I started with the monitor saying out of range and the only way to restart is by Command-Option P & R. I understand info about the monitor settings is stored in PRAM under OSX but how do I access PRAM to tell the G3 what monitor frequency I'm using or should system preferences have done this?. Any advice most welcome. Mark

Hello Grant, I'm at a loss with this one. I have reset the osx display prefs to my usual settings 1280 x 960 at 60.0 Herts, restarted the G3 and I'm getting the same message from the monitor everytime. The message tells me the usable range is HF30khz - 70khz / VF50hz - 140hz then it tells me the current frequency is HF24.5khz VF60hz I guess this explains why I'm having the problem but I don't understand what is telling the monitor to run at this frequency at start up. My monitor is a Formac ProNitron 17/550 with full auto sync and has never given a moments trouble. I've tried everything I can think of, everything was fine until I installed the lastest itunes. Your spot in respect to my preferences being activated as soon as OSX starts, evertything is back to normal and all my personal settings saved. Do you think a complete reistalltion of OSX would help? wipe the drive and start from scratch or do you think I'd have the same problems with the PRAM settings even after doing this. I have all my data backed up now so it wouldn't be the end of the world, although painfull to reinstall all my 3rd party software. Any further thoughts most welcome. Regards - Mark

Ever since I updated InDesign CC (2014) approximately 22 days ago... I CANNOT get the welcome screen to not come on at the launch on InDesign. I set the preferences in InDesign to NOT show the welcome screen upon launch, but it will NOT hold the preferenc

Ever since I updated InDesign CC (2014) approximately 22 days ago... I CANNOT get the welcome screen to not come on at the launch on InDesign. I set the preferences in InDesign to NOT show the welcome screen upon launch, but it will NOT hold the preferences i choose. Anyone else have any other ideas? I am about to lose my mind... I hate you ADOBE!!!

that s just the problem, that is why my level of frustration is boiling over ... I have told InDesign over and over again "Do Not Show Again" but it will just not hold the settings. It might hold it for a day or so, but then suddenly there it is again on another launch. Very very annoying.

Printing From PSE12 - settings not holding/prints are inconsistent.

Printing from PSE12, MacOS with PSE12 controlling color/appling profile.
Color management does not appear to turn off or disengage within any given print driver.
When selecting Color Matching, both ColorSync & given printer are active, both should be ghosted out.
After printing one image/sheet & printing again & selecting Color Matching within the print window both are ghosted out.
Saving a pre-set does not solve the issue.
Currently prints are not matching when having PSE12 controlling color.
what is causing this issue ? Is it PSE12 ? Is it the OS ? WHAT !
Please help. THANKS

This inability to disable color management is within the OS, right ? Or is it PhotoShop Elements ?
Yes I do have means of controlling color management from a driver stand point but the attempt here is to turn color management off from the OS & driver to allow the app to control color management.
Problem is that when printing and setting/selecting settings to allow this, it appears management is getting miss managed.
And if I set a pre-set within PSE, settings do not hold.
I do not want ColorSync to control color management.
I do not want print driver to control color management.
And settings to not hold from print to print and a pre-set does not appear to hold as well.
What is the fix for this ? Do not use PSE ? Do not use MacOS, This does not happen on a WIN based system ?!?

X-Fi Audio Settings Not Remembered After Reboot - Solution

I have an X-Fi Titanium Fatal1ty PCI-E on WIN7 64bit and I decided to try some different drivers, just out of curiosity. My drivers were working fine for the most part (except OpenAL BSOD) prior to this.
After changing drivers, Windows would no longer remember my audio settings, such as volume level and all the changes I made in the Creative Console Launcher (EQ, disable CMSS-3D, THX settings). After rebooting, the settings would revert to the default setting.
Solution:
I went into the Creative Audio Control Panel, to the "Restore Defaults" tab and, with all boxes checked, hit the "Restore Defaults" button. Whatever was causing it to not remember settings was cleared out and it now remembers all of my audio settings after restarting Windows.

Hy,
have you already tried to start the soundcard ?at other PCs?
Do you have this problem with other usb-devices at your PC, too?
What happens after standby or hibernate?
Does for example a li've linux or windows in secure mode detect the x-fi after startup?
Maybe this details can be helpful to find the reason. I could imagine, the died internal sound card is inhibiting windows in detecting any other audio device...
I've had a died touch pad (the left mouse button didn't work after ~5 minutes) and until disable it, the same problem happened with the other trackpoint mouse, too.

Is there a way to create a project with custom audio settings that are NOT only "Stereo" or "Surround"?

Is there a way to create a project with custom audio settings that are NOT only "Stereo" or "Surround"?
Thanks!
-Adrian

the old apps are on my computer but they have had upgrades since they were put on the ipod originally. you think you would get a warning about this when you restored. I was not worried about losing the progress of the apps but i would have been worried about the app it self!!!!!

My iPod Classic 120GB is clicking and not turning on. It has been charged but does not hold charge. I am not able to restore factory settings. Error code and have tried troubleshooting options without success. Thoughts?

My iPod Classic 120GB makes a clicking noise when syncing with iTunes and will not sync. It will not turn on at this time and has been charged but does not hold the charge. After trying to sync, iTunes states that iPod must be restored. Have tried to do this but not successful, I receive an error code and have done the troubleshooting steps for the error and I am still not able to sync or use my iPod. HELP?

Hi mafiose15,
Thanks for visiting Apple Support Communities.
Restoring your iPod to factory settings is the best way to try and get it back to working order. You can use the instructions below to restore it:
How to restore iPod
Verify that you have an active Internet connection, because you may need to download new versions of the iTunes and iPod Software.
Download and install the latest version of iTunes if necessary.
Open iTunes. Connect your iPod to your computer using the USB or FireWire cable that came with your iPod.
After a few moments, your iPod will appear in the Source panel in iTunes.
Select your iPod in the Source panel. You will see information about your iPod appear in the Summary tab of the main iTunes window.
Click Restore.
If you are using a Mac, you will be asked to enter an administrator’s name and password.
A progress bar will appear on the computer screen, indicating that stage one of the restore process has begun. When this stage is done, iTunes will present one of two messages with instructions specific to the iPod model you are restoring.
Disconnect iPod and connect it to iPod Power Adapter (typically applies to older iPod models).
Leave iPod connected to computer to complete restore (typically applies newer iPod models).
During stage two of the restore process, the iPod displays an Apple logo as well as a progress bar at the bottom of the display. It is critical that the iPod remain connected to the computer or iPod power adapter during this stage.
Note: The progress bar may be difficult to see, because the backlight on the iPod display may be off.
After stage two of the restore process is complete, the iTunes Setup Assistant window will appear. It will ask you to name your iPod and choose your syncing preferences, as it did when you connected your iPod for the first time.
You can find the instructions in this article:
Restoring iPod to factory settings
http://support.apple.com/kb/ht1339
All the best,
Jeremy

INDCS3 Print Presets do not hold Printer Preference Settings

We are running WinXP, INDCS3 suite. We noticed that when creating and saving a Print Preset and reloading it to another PC, the Printer preference settings (in particular) paper size and tray do not hold. We created several for staff and when they LOAD them, the printer/preferences from specific printers do not hold. We did not have this problem in CS2.
Is this simply the fact that the Print screen setting hold, but preferences (setup) for a specific printer do not?
Can anyone share any info on this?
KPanthen, Albany, NY

I'm having a similar problem where I cannot set my printer to collate and the checkbox is grayed out in General tab.. and I know my printers are able to collate.. For some odd reason Indesign doesnt exactly read or detect the printer settings..

Error "iTunes could not start because of incorrect audio settings"

After upgrading to 7.5, my iTunes would'nt open, and i kept getting the error message "iTunes could not open because of incorrect audio settings" (or something like that)
I tried everything the support site said, like uninstalling, re-downloading, and re-installing, but i get the same error. I even got the error after i uninstalled 7.5, and re-installed 7.4. I've had to uninstall 7.5, delete all folders, and clear out the registry to get 7.4 to work again.
Nothing has changed within my sound settings (im currently using an X-Fi soundcard)
Any help would be appreciated. Thanks.
[EDIT] sorry, i forgot to add, im using windows vista32
Message was edited by: jcp.sic

Problem solved.
I re-upgraded via iTunes, restarted when asked (the exact same steps i went through when i originally got the error), only this time, i launched Quick-time first, then opened iTunes.
I guess i must have got a bad download before, or opening quick-time first was the answer.
Either way, 7.5 works now.
Thank you for all the help guys. i got this fixed a lot faster than i thought i would thanks to your fast replys.

Controls beats audio settings

my controls beats audio settings for the envy 14 spectre won't load

Hi,
Try using Recovery Manager to reinstall the IDT HD Audio Driver ( this will also reinstall the Beats Audio interface ) - the procedure for using recovery manager to reinstall Software and Drivers is detailed in the document on the link below.
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01868333&cc=us&dlc=en&lc=en&jumpid=reg_R1002_US...
After the reinstallation has completed, restart the notebook.
When windows has fully reloaded, use Recovery Manager to reinstall HP Quick Launch Buttons. Again, when this has completed ,restart the notebook.
Let us know how it goes!
"I work for HP."
****Click the (purple thumbs up icon in the lower right corner of a post) to say thanks****
****Please mark Accept As Solution if it solves your problem****
Regards
Manjunath

My iPhone 4 (purchased 9 months ago) is suddenly not holding a charge though I did nothing to change the settings, and, in fact, have turned anything that could drain it off. It will go from 100% to 70% overnight.

Ny 9-month old iPhone 4 is suddenly not holding a charge. It was just fine before this, but now, for instance, it goes from 100% to 70% overnight. Although I had not changed any settings prior to this happening, I have now turned off notifications, location services, etc. to see if it makes any difference, but it doesn't.

You may have other things causing it if you have push notifications for email or other things making background data connections. Try putting the phone in airplane mode overnight and see if that makes any difference. If it does then it's a background application issue.

Audigy not holding audio settings in control pa

Similar Messages

Maybe you are looking for