Audigy NX Multiple Instances in Device Mana

Since I first installed the Audigy NX, I've had a problem with Device Manager having multiple instances of both the SB and the Composite USB device. It seems like it's associated with the SBUSBdll.Dll at XP Boottime that re-enumerates the Sound Card. Not a major issue, but everytime it gets redetected it uses the default values (Sample Rates, Volume mixer settings).
Has anyone else seen this type of behavior ? I'm tempted to take the SBUSBdll.Dll out of Startup and see if I can keep just the "Single" Audigy NX in my Device Table.
Usually, I'll have two instances, an acti've and a "Phantom". Last time I checked, I had 4 instances of each in Device Manager. All System/Drivers are updated and NX Firmware is latest available.
Thanks -

stewartbourke wrote:
<IMG height= src="http://grou
ps.
google.com/img/dot_clear.gif" width=2>
I have a problem loading ASIO drivers with my Audigy 2 NX / USB sound card.My PC is a HP Pavillion ZD8000 laptop, with 52Mb RAM and a 60GB dri've,
Windows XP home.
I am trying to select the Creative ASIO driver from within the Cubase LE VSTi multitrack setup dialogue.
I went into the VST/device setup and sure enough there was the creative
ASIO driver in the drop-down. However, when I try to select it it says
that the driver could not be loaded. I have run the update mechanism
from the Creative site and it has updated all my drivers, so I have the
latest ones installed.
Does anybody know if there is anything else I need to setup to allow me
select the Creative ASIO driver?
My version of Cubase LE is .07...
Thanks.
Is ASIO on NX 'locked' to 6-bit/48 kHz or is there also 24-bit/96 kHz resolution available?
Try to set driver bit-depth to 6 and samplerate to 48 kHz on Cubase.
Have you tried USB-ASIO drivers? There is a demo available.
Another driver(s) to try out are Asio4All and Asio2KS. These are WDM/KS 'wrappers' but should work with low latencies too (as required on recording).
.jtpMessage Edited by jutapa on 09-06-2005 06:3 AM

Similar Messages

Find monitor instance name , device name , resolution and frequency of multiple monitors (VGA and HDMI)

hi,
In my system multiple monitors are connected (VGA and HDMI). In need to know the
monitor instance name , device name , resolution and frequency of each monitor.. any solution?
i used wm class 'WmiMonitorConnectionParams' to determine Video output technology connection type and InstanceName.
But i didn't get the device name , resolution and frequency of each monitor.??
There are other wmi class like :
WmiMonitorBrightnessEvent
WmiMonitorConnectionParams
WmiMonitorRawEEdidV1Block
WmiMonitorListedFrequencyRanges
WmiMonitorDigitalVideoInputParams
WmiMonitorAnalogVideoInputParams
WmiMonitorID
WmiMonitorBrightnessMethods
WmiMonitorBasicDisplayParams
WmiMonitorColorCharacteristics
WmiMonitorDescriptorMethods
WmiMonitorListedSupportedSourceM…
WmiMonitorBrightness
WmiMonitorColorXYZinCIE
WmiMonitorSupportedDisplayFeatures
WmiMonitorBasicDisplayParams
Win32_VideoController
Win32_VideoConfiguration
Win32_VideoSettings Win32_DisplayControllerConfiguration
Win32_DisplayConfiguration
But unable to determine monitor having its corresponding values? please help me to find a solution .
is there any other method to get multi monitor details?
thank you

Hi sumith,
I read some documents about WmiMonitorConnectionParams class, it should be able to get the video putput technology by the D3DKMDT_VIDEO_OUTPUT_TECHNOLOGY enumeration.
D3DKMDT_VIDEO_OUTPUT_TECHNOLOGY enumeration
So what happens when you are using WmiMonitorConnectionParams class? What prevent you? Anyway, please see a example of using WmiMonitorConnectionParams class, maybe you could get some hints on it.
http://stackoverflow.com/questions/10085900/querying-wmi-for-d3dkmdt-video-output-technology
Best regards,
Shu Hu
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Problem with multiple instances of shared printers being installed on client computers when the spooler service is started

Hello,
We have Windows Server 2012 and clients using Windows 8. We've been having some printer problems for awhile now that I haven't been able to figure out for the life of me. The main problem is the fact that printers are installed on computers automatically
once the drivers are installed. The side-effect of multiple instances of each printer showing up is very annoying but I suspect fixing the initial problem will resolve this secondary one.
Here is the rundown:
We add the shared printers on logon to the clients using the GPO thus installing the drivers locally.
Whenever the spooler on the client is restarted with the drivers installed, all of the
shared printers that were previously installed get duplicated 5 more times (for a total of 6 instances of each shared printer) on the "Devices and Printers" page. This happens
all the time.
Removing them only fixes the issue temporarily, as soon as the spooler or computer is restarted, it seems these shared printers are somehow found on the network and the duplicates return.
Two of these printers are located on different clients, installed locally and shared while the other three are all installed on a server and shared through it. The issue is the same on all of them.
Cleaning the spooler completely (registry and files from C:\system32\spool) fixes the issue temporarily as well since, as soon as the drivers are reinstalled, the issue occurs again.
I've tried many things (disabling the GPO, editing the GPO, printer shares, registry, etc.) and searched tirelessly online for a cause and solution but I'm stumped. Does anybody have any idea what might be causing this problem and how to resolve it?
Thanks for your time!
Update #1: I just tried adding the NoNetCrawling option in the registry found in this article -> http://support.microsoft.com/kb/320138/en-us
I couldn't find the same for Windows 8 unfortunately. I also tried disabling network discovery and all other sharing options to no avail.
Update #2: I tried isolating the computer to a different subnet and restarting the spooler and, sure enough, the issue didn't occur. This proves that the issue is network share related. Also, as soon as I change the IP back to the regular domain
subnet one, the multiple printer instances re-appeared again.
Update #3: I just tried doing the same thing but on the server where the printers are installed and shared and, sure enough, despite being in a different subnet, the issue occurred. This leads me to believe there is a setting on this server at fault.
Question is, which one?

We have deployed a brand new Active Directory domain for a customer. ALL the servers without exception are Windows 2012 R2 and all clients are Windows 8.1 32bit VDI clients.
The issue that we have is around network printers.
We are deploying 4 printers from a Windows 2012 R2 Server via the print management/Deploy Printer and assigning that to a GPO. The printers are deployed to the Computers which should mean that the users get all 4 printers which they then should be allowed
to set their default and personal settings for that printer.
Our printers are deployed like this:
1. Created security group
2. Assigned VDI computers to the security group
3. Created GPO to reflect security group
4. Modify GPO to do security filtering based on computer group membership
5. Deployed 4 x printers through Print Management to the GPO on a per machine basis
However, on the users Devices and Printers screen we are not seeing the 4 printers. For some users
they see duplicates of all 4 printers so e.g they can have upwards of 8 or more. Other users have no printers displayed whatsoever. The next time they log off or restart they then have a different amount of printers displayed.
If they try and set the default then it will set and the next time they check the default may have moved to another printer even without logging off or back on.
Now, where this gets strange is within an application such as MS Word 2013 or Notepad if they use the file and print menu the printers will be listed, even if the user has no printers displayed in Devices and Printers. If the users selects a printer then they
can then print OK.
If we check HKCU\Printers||Connections then the CORRECT 4 printers are showing as to what is being deployed via the GPO so I know that the Windows 8.1 terminals are receiving the correct printers from the GPO.
To try and correct this over the course of the week we have deployed the printers via Group Policy Preferences to the user and then the PC to no avail. Currently we are using the Print management\Deployed Printers to deploy all 4 printers to the computer via
the Computer GPO.
I believe that this issue is related to the display somehow in Devices and Printers rather than a GPO or print server issue as we can see via the registry the clients are receiving the 4 correct mentioned printers as shown in the registry.
FYI: We only have around 30 users and all users are getting this problem. All users are receiving the same GPO's and have the same few apps installed, Office 2013, Adobe Reader etc.
What we want is for the computers to receive all 4 printers. All users should be able to use all 4 printers but the user should be able to select their particular default, depending where they are located or what they are printing that particular day. Their
particular default should persist after reboot. (We have 2 x Copiers and 2 x HP Laserjets) All users have redirected documents and desktop but the rest of the profile is on the VDI and persists after their reboot. The profile is not roaming as the user is
assigned a particular VDI.
After a week of scratching our heads with this we are open to suggestions and any would be appreciated.
We have tried following the issues on this thread to no avail either as they still return.

Multiple instances of mplayer with jack

"_R_ealtime software mixing ?!?! wtf thats awesome--actually im not a studio junkie, i just need sound on one of them"
i understand that the casual nature of my involvement with jackd suggests a less-than-appropriate level of respect and diligence for what this almighty app is capable of serving up. i just need to level audio volume on multiple instances of mplayer with software mixing (my sound card is cheap).
all my jackd configs are vanilla from the wiki as stated below. if anyone has another solution or a request for information in regard to this solution please reply. as always, thanks in advance
--here is some err... background
i have a some files that i would like to run with mplayer and a video file [with its own audio] that i would like to run concurrently. it should be possible to use jackd to let one instance of mplayer show video with no sound while permitting the audio from the other instance to play at arbitrary volume. without jack, i cannot control sound independantly since both instances seem to use the same device (PCM0). furthermore i have found that starting multiple instances of mplayer leads to weird artifacts which persist after all running instances of mplayer concurrent with artifact appearance have been closed.
so i installed jack-audio-connection-kit following the wiki verbatim. then i installed qjackctl. starting jackd as root and qjackctl with sudo allowed me to see the first instance of mplayer but not the second.
what is the difference between running mplayer through alsa and running mplayer through jack through alsa (not sure if the objects are accurately laid out there but whatever)? the wiki basically provides an out of the box solution for software mixing a bunch of inputs (i have friends who do sound professionally though not with linux and im envisioning way more complicated stuff than my humble pair of mplayers
Last edited by poopship21 (2010-09-25 15:20:56)

ngoonee wrote:
karol wrote:
ngoonee wrote:And running mplayer through alsa won't be able to do what you want, simply because the mixing is fixed. JACK and pulseaudio are sound servers which allow you to control the mixing, both can do what you want.
If you run one file with '-ao null' and the other one with '-vo null' you can manipulate them independently, there's no sound mixing involved, it just allows you "to add visuals to an audio feed spontaneously". They can both be run with 'af scaletempo' to speed up / slow down etc.
Hmm, wonder if that's what the OP was looking for?
From his first posts:
poopship21 wrote:it should be possible to use jackd to let one instance of mplayer show video with no sound while permitting the audio from the other instance to play at arbitrary volume
Also, read his second post. <shrugs>

Is there any version of Indesign that allows to open multiple instance at the same time

I am using Indesign CS3 to generate the bulk reports automatically(programmatically) using Adobe indesign library . One of the key limitation to this tool is it allows to open only one instance at a time unlike word where multiple instances can be opened at the same time. Is there any adobe indesign too version desktop/server which allows to open multiple instances at the same time. Any help on is appreciated. Thanks.

@PeterG
You said "You might want to examine the End User Licensing Agreement (EULA) for any prohibition against using these two instances at the same time with the same license; the license does permit two installs for the same user that are not used simultaneously." I thought that meant you had read the EULA. It's pretty unambiguous on that point.
For everyone's edification about multiple installations and server use with a standard license here's the relevant text:
2. Software License.
If you obtained the Software and any required serial number(s) from Adobe or one of its authorized
licensees and as long as you comply with the terms of this agreement, Adobe grants you a non-exclusive
license to install and use the Software in a manner consistent with its design and Documentation and as
further set forth below. See Section 16 for specific provisions related to the use of certain products and
components, for example font software, Acrobat, After Effects, Adobe Presenter, Contribute, Adobe
Device Central, Flash Player, Flash Builder, and Adobe Runtimes.
2.1 Limited Use. The Software, or portions of the Software, may allow installation and use without a serial
number. If so, you may install but not use such non-serialized Software on any number of Computers as
part of an organizational deployment plan. Further, you may install and use such non-serialized Software
on any number of Computers for demonstration, evaluation and training purposes only and only if any
Output Files or other materials produced through such use are used only for internal, non-commercial and
non-production purposes. You may not use such non-serialized Software after any applicable time-out
period has ended, unless you input a valid serial number under Section 2.2. ACCESS TO AND USE OF
ANY OUTPUT FILES CREATED WITH SUCH NON-SERIALIZED SOFTWARE IS ENTIRELY AT
YOUR OWN RISK.
2.2 General Use. You may install and use one copy of the Software only on the Permitted Number of your
compatible Computers into which you enter a valid serial number.
2.3 Distribution from Server. You may copy an image of the Software onto Computer file server(s) within
your Internal Network for the purpose of downloading and installing the Software onto Computers within
the same Internal Network for use as permitted by Section 2.1 and 2.2.
2.4 Server Use. You may install the Software on Computer file server(s) within your Internal Network only
for use of the Software initiated by an individual from a Computer within the same Internal Network only
as permitted by Section 2.2. The total number of users (not the concurrent number of users) able to use the
Software on such Computer file server(s) may not exceed the Permitted Number.
By way of example, the foregoing does not permit you to install or access (either directly or through
commands, data or instructions) the Software: (a) from or to a Computer not part of your Internal Network,
(b) for enabling Web hosted workgroups or services available to the public, (c) by any individual or entity
to use, download, copy or otherwise benefit from the functionality of the Software unless licensed to do so
by Adobe, (d) as a component of a system, workflow or service accessible by more than the Permitted
Number of users, or (e) for operations not initiated by an individual user (e.g., automated server
processing).
2.5 Portable or Home Computer Use. Subject to the important restrictions set forth in Section 2.6, the
primary user of the Computer on which the Software is installed under Section 2.2 (“Primary User”) may
install a second copy of the Software for his or her exclusive use on either a portable Computer or a
Computer located at his or her home, provided that the Software on the portable or home Computer is not
used at the same time as the Software on the primary Computer.
2.6 Restrictions on Secondary Use by Volume Licensees. If the Software was obtained under an Adobe
volume license program (currently known as Adobe Open Options) by any licensee other than an
educational volume licensee, the second copy of the Software made under Section 2.5 must be used solely
for the benefit and business of that volume licensee. For more information about secondary use by volume
licensees, please visit our Web Site at http://www.adobe.com/go/open_options.
There is also language stating that if you have a dual boot or other system capable of running more than one OS you will need a separate license for each platform if you want to run the software on more than one.

Sync: Multiple Instance Error Causes Desktop Manager to Fail

I can no longer sync my Outloook calendar with my Bold 9650 using Desktop Manager 6 (bundle 3084). I failed multiple times, rebooted each device and tried again but still receive the same error. Error is a message from Windows that Desktop Manager has stopped working. The last few entries in the log indicate:
08:55:35.962 Sync information for application 'Calendar' in translator 'Outlook' --
08:55:35.962 Number of newly added records since last sync (New): 482
08:55:35.962 Number of records modified since last sync (Modified): 0
08:55:35.962 Number of records deleted since last sync (Deleted): 0
08:55:35.965 Performing two-way sync
08:55:35.966 ERROR: Multiple instance error. Remove a recurring instance or exception on (11/8/2011).
08:55:35.966 ERROR: Multiple instance error. Remove a recurring instance or exception "Bi-weekly Leadership Team Call".
I saw an entry in the Outlook calendar related to the error, but not in the BB calendar, and deleted it but this did not resolve the problem. At this point, I cannot get DM to complete synchronization. Has anyone else experienced this and identified a resolution?
thanks,
eric

Hi Eric,
Did you manage to resolve this? I have the same error and cannot get DM to complete the sync.
Thanks,
Johann

Multiple instances com.apple.outlook.client.exe *32 during Outlook sync

First, specs:
Windows 7 64bit
Norton 360
Outlook 2010 Beta
iPhone 3GS (iOS 4)
iTunes 9.2.0.61
Microsoft Windows 7 x64 Home Premium Edition (Build 7600)
NVIDIA 132-CK-NF78
iTunes 9.2.0.61
QuickTime 7.6.6
FairPlay 1.8.20
Apple Application Support 1.3
iPod Updater Library 9.2d4
CD Driver 2.2.0.1
CD Driver DLL 2.1.1.1
Apple Mobile Device 3.1.0.62
Apple Mobile Device Driver 1.49.0.0
Bonjour 2.0.2.0 (214.3)
iTunes Serial Number BC49453253087E71
Current user is not an administrator.
The current local date and time is 2010-06-22 16:22:25.
iTunes is not running in safe mode.
WebKit accelerated compositing is enabled.
HDCP is supported.
Video Display Information
NVIDIA, NVIDIA GeForce GTX 260
** External Plug-ins Information **
No external plug-ins installed.
Genius ID: 23fbe8aec176fa95f0b481c13800b05c
** Network Connectivity Tests **
Network Adapter Information
Adapter Name: {9FC31319-2E36-4431-9FB0-EBBA27A93A9D}
Description: NVIDIA nForce Networking Controller #2
IP Address: 0.0.0.0
Subnet Mask: 0.0.0.0
Default Gateway: 0.0.0.0
DHCP Enabled: Yes
DHCP Server:
Lease Obtained: Wed Dec 31 16:00:00 1969
Lease Expires: Wed Dec 31 16:00:00 1969
DNS Servers:
Adapter Name: {234CF460-8AE3-42AF-8CE1-A7369FDDADFD}
Description: NVIDIA nForce Networking Controller
IP Address: 192.168.1.101
Subnet Mask: 255.255.255.0
Default Gateway: 192.168.1.254
DHCP Enabled: Yes
DHCP Server: 192.168.1.254
Lease Obtained: Tue Jun 22 15:56:44 2010
Lease Expires: Wed Jun 23 15:56:44 2010
DNS Servers: 192.168.1.254
192.168.1.254
Active Connection: LAN Connection
Connected: Yes
Online: Yes
Using Modem: No
Using LAN: Yes
Using Proxy: No
SSL 3.0 Support: Enabled
TLS 1.0 Support: Disabled
Firewall Information
Windows Firewall is on.
iTunes is enabled in Windows Firewall.
Connection attempt to Apple web site was successful.
Connection attempt to iTunes Store was successful.
Secure connection attempt to iTunes Store was successful.
Secure connection attempt to iPhone activation server was successful.
Last successful store access was 2010-06-21 19:07:42.
** CD/DVD Drive Tests **
LowerFilters: PxHlpa64 (2.0.0.0),
UpperFilters: GEARAspiWDM (2.2.0.1),
E: ASUS DRW-2014L1T, Rev 1.02
Drive is empty.
** Device Connectivity Tests **
iPodService 9.2.0.61 is currently running.
iTunesHelper 9.2.0.61 is currently running.
Apple Mobile Device service 3.1.0.0 is currently running.
Universal Serial Bus Controllers:
Standard OpenHCD USB Host Controller. Device is working properly.
Standard Enhanced PCI to USB Host Controller. Device is working properly.
FireWire (IEEE 1394) Host Controllers:
Texas Instruments 1394 OHCI Compliant Host Controller. Device is working properly.
Connected Device Information:
iSquelch, iPhone 3GS running firmware version 4.0
Serial Number: 87945GJR3NR
** Device Sync Tests **
Sync tests completed successfully.
Whenever I sync, multiple instances of (and by multiple, I mean literally dozens) of copies of "com.apple.outlook.client.exe *32" begin opening. They continue opening until iTunes basically grinds to a halt. This happens with MobileMe, too, and means I can't sync up with Outlook.

Checked: I'm using a 32-bit version of Outlook and not a 64-bit. Did not sync via a second user's installation, either.
Still searching for resolution.
Note: All other syncing still works, iTunes only crashes under the weight of 90 or so com.apple.Outlook.client.exe instances when any (any) Outlook-related option is checked, including Outlook-related options in MobileMe. The processes can be killed all at once by right clicking "SyncServer.exe" in the task manager and clicking "End Process Tree."

Multiple instances of Mail.app must be possible

I've seen many questions regarding the possibility of running multiple instances of Mail.app as separate processes. There seems to be much good reason to be able to do so, i.e. separating work and private mail, and very little bad reason to do so (maybe some problems when doing upgrades or backups, but I'm not yet sure of this). It also seems that it should not be so hard to do.
So far, using some web acquired wisdom, I've done the following:
1. Duplicate mail.app:
sudo ditto Mail.app WorkMail.app
2. Rename the executable:
mv /Applications/WorkMail.app/Contents/MacOS/Mail /Applications/WorkMail.app/Contents/MacOS/WorkMail
3. Use Property List Editor to set the following values in/Applications/WorkMail.app/Contents/Info.plist (Apple-S to Save changes!):
Root/CFBundleExecutable=WorkMail
Root/CFBundleIdentifier=com.apple.workmail
Root/CFBundleName=WorkMail
Root/NSServices/0/NSPortName=WorkMail
Root/NSServices/1/NSPortName=WorkMail
Root/NSServices/2/NSPortName=WorkMail
Root/UTExportedTypeDeclarations/0/UTTypeIdentifier=com.apple.workmail.emlx
Root/UTExportedTypeDeclarations/1/UTTypeIdentifier=com.apple.workmail.emlx.part
4. Create the following directories:
mkdir ~/Library/WorkMail Downloads
mkdir ~/Library/WorkMail
4. Launch the 'new' application 'WorkMail'.
5. Create mail accounts using the application's 'wizard'.
Here is where the first problem is encountered. The new account directories and files are still created at ~/Library/Mail. Navigating to Mail->Preferences->Accounts->[account_name]->Advanced seems to offer the option to change the mail store account directory, but nothing can actually be changed here. So...
6. Quit WorkMail.
7. Move newly created account(s) directories (where [newaccountdirectory] is a directory named with the format: [mail_type]-[user]@[domain].[tld]@[pop].[domain].[tld]]) to the correct location:
sudo mv ~/Library/Mail/[newaccountdirectory] ~/Library/WorkMail/
8. Use Property List Editor to set the following values in ~/Library/Preferences/com.apple.workmail.plist (Apple-S to Save changes!):
/Root/ActiveViewers/0/AttachedMailboxListExpandedItems/[0to_#_ofaccounts]/=~/Library/WorkMail/Mailboxes/...
/Root/CurrentTransferMailboxPath=~/Library/WorkMail/Mailboxes/...
/Root/MailAccounts/[0to_#_of_accounts]/AccountPath=~/Library/WorkMail/[new_accountdirectory]
/Root/MailDownloadsPath=~/Library/WorkMail Downloads
9. Relaunch WorkMail.
Everything at this point seems to work okay, **BUT** when I launch Mail while WorkMail is launched, I find that I cannot navigate into any mail folders within Mail. I receive an error message indicating that a necessary directory is locked. It seems that the locking mechanism used by the application may be hard-coded to lock ~/Library/Mail, and both instances of the application continue to take this action when launched, making it impossible for both to work harmoniously at the same time. I will conduct more testing and experimentation, but I am not yet capable of editing the application itself. If anyone can take us this last step, I'm sure there are many who would also like to be able to take advantage of the potential functionality.
Thanks for any input!
Steven Stromer

Hopefully, there is someone with a programming background who
can take me and other who have posted similar questions through
the final mile on this...
Well, I do have a programming background, and I must say that it amazes me that someone might want to do what you did to “solve” a problem that IMO doesn’t exist.
What exactly is it that you expect to accomplish by running multiple instances of Mail, and for which neither (1) organizing your mail using multiple mail accounts, custom mailboxes, rules, and/or smart mailboxes, nor (2) setting up separate user accounts, are acceptable solutions? I just don’t get it.
I've seen many questions regarding the possibility of running multiple
instances of Mail.app as separate processes.
I haven’t. Could you please provide a link for such a question, preferably one asked by someone who knew how Mail and Mac OS X work, i.e. a link for a case where there really was such a need?
There seems to be much good reason to be able to do so
I know of no such reasons, neither good nor bad.
i.e. separating work and private mail
I don’t see how that’s a reason to want to run multiple instances of Mail. Could you please elaborate?
Maybe if you tell us what exactly is the problem that you’re trying to solve, instead of focusing on a convoluted “solution” that doesn’t work, we could propose a solution that does...
and very little bad reason to do so
Well, if the fact that it’s so convoluted and doesn’t even work aren’t bad enough reasons, I don’t know what it is...
It also seems that it should not be so hard to do.
I wonder what makes you think so. It does certainly seem hard to me, so hard that I don’t even think it can be done without breaking something, if at all...

What is the best way to load multiple instances of a button into master index page?. I have looked a

I have successfully created an animated button that opens to reveal a quotation with a nested clickable link to the source. What I would like to do is have several of these with different quotes inside them, scattered on the page. I have looked at the composition loader available via Edge Commons, and it seems that would require some sort of Edge animate Stage 'frame' to load the instances into? Is there any way to place them directly into the master page - as div elements...?
The outer of the buttons is the same, on hover they open partialy on click fully, to reveal their particular text - which I thought about loading it at runtime with json, or maybe handlebars...?
I would also like to make the buttons only take the necessary space. ie. before they expand they are only buttons. ( I have set the stage to hidden but it still takes up space). To acheive this, I think perhaps I will have to target the inner components css, and set them as display:none until the button is hovered over, then set :hover and :active pseudo classes inside edge. Is this feasible?
Thanks in advance for any ideas/suggestions...

Hello, Thanks for your helpful input. Based on that, and the tutorial 'http://tv.adobe.com/watch/learn-edge-animate-cc/ingesting-external-data-dc/' - I have written code to drive my button's behaviour. (copied below...)
var textArray =new Array();
var currentHead = 0;
var currentText = 0;
var currentFoot = 0;
var s = sym.getSymbol("textContainer");
sym.$("textContainer")$.("text").html("");
var sh = sym.getSymbol("headContainer");
sym.$("headContainer")$.("head").html("");
var sf = sym.getSymbol("footContainer");
sym.$("footContainer")$.("footer").html("");
$.getJSON("assets/sources1.json", function(data){
 for (var i=0; i<data.length; i++){
 textArray.push({"head":data[i].heading,
 "text":data[i].text,
 "footer":data[i].foot,
 "link":data[i].link});
 sym.$("headContainer")$.("head").html(textArray[currentHead]).heading;
 sym.$("textContainer")$.("text").html(textArray[currentText]).text;
 sym.$("footContainer")$.("foot").html(textArray[currentFoot]).foot;
 sym.$("footContainer")$.("link").html(textArray[currentLink]).link;
But there is an error I don't understand at line 7...
Also - as you can see, at present I have several symbols in parallel. Would I be better off nesting the text containers inside the outer button container? and would I be better off creating styled mini- pages of text data, and then loading them - instead of loading them as symbols? I have had to create seperate symbols because I cannot adequately stle the text - so some is bold, some is italic etc. within one text field. Or can I? I guess I could nest several text fields inside one symbol...?
I remain unsure how to load the finished animation button instances. In your example you were still loading into an animation But from yor example, I guess I would need to place all my examples inside an outer edge composition... but then I think positioning them accurately with css, making adjustments etc. will be fairly tricky. Is there any way to place multiple instances directly into divs in index.html? Could I simply repeat the class...? I may be answering my own questions here.

Since upgrading my mid-2010 MacBook Pro from the original Snow Leopard to Yosemite 10.10.2 there have been multiple instances of restart (crash) also slow operation. Any suggestions?

Since upgrading my mid-2010 MacBook Pro from the original Snow Leopard to Yosemite 10.10.2 there have been multiple instances of restart (crash) also slow operation & pop up message stating web content has failed. Any suggestions?

Many thanks for your interest, I've downloaded & run the app as suggested, report copies & pasted below.
Problem description:
Following upgrade from Snow Leopard to Yosemite 10.10.2 machine is slower & suffers from shut down / reboot and closing web pages due to unexpected error
EtreCheck version: 2.1.8 (121)
Report generated 6 February 2015 08:40:29 GMT
Download EtreCheck from http://etresoft.com/etrecheck
Click the [Click for support] links for help with non-Apple products.
Click the [Click for details] links for more information about that line.
Hardware Information: ℹ️
 MacBook Pro (15-inch, Mid 2010) (Technical Specifications)
 MacBook Pro - model: MacBookPro6,2
 1 2.4 GHz Intel Core i5 CPU: 2-core
 4 GB RAM Upgradeable
 BANK 0/DIMM0
 2 GB DDR3 1067 MHz ok
 BANK 1/DIMM0
 2 GB DDR3 1067 MHz ok
 Bluetooth: Old - Handoff/Airdrop2 not supported
 Wireless: en1: 802.11 a/b/g/n
 Battery Health: Normal - Cycle count 75
Video Information: ℹ️
 Intel HD Graphics - VRAM: 288 MB
 Color LCD 1440 x 900
 NVIDIA GeForce GT 330M - VRAM: 256 MB
System Software: ℹ️
 OS X 10.10.2 (14C109) - Time since boot: 0:13:14
Disk Information: ℹ️
 Hitachi HTS545032B9SA02 disk0 : (320.07 GB)
 EFI (disk0s1) <not mounted> : 210 MB
 Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
 Macintosh HD (disk1) / : 318.84 GB (134.68 GB free)
 Core Storage: disk0s2 319.21 GB Online
 MATSHITADVD-R UJ-898
USB Information: ℹ️
 BUFFALO HD-PVU2 500.11 GB
 EFI (disk2s1) <not mounted> : 210 MB
 Time Machine Backups (disk2s2) /Volumes/Time Machine Backups : 499.76 GB (257.33 GB free)
 Apple Internal Memory Card Reader
 Apple Inc. BRCM2070 Hub
 Apple Inc. Bluetooth USB Host Controller
 Apple Inc. Apple Internal Keyboard / Trackpad
 Apple Computer, Inc. IR Receiver
 Apple Inc. Built-in iSight
Gatekeeper: ℹ️
 Mac App Store and identified developers
Kernel Extensions: ℹ️
 /System/Library/Extensions
 [not loaded] jp.co.buffalo.driver.turbousbhdd (1.0.0) [Click for support]
Launch Agents: ℹ️
 [loaded] com.hp.help.tocgenerator.plist [Click for support]
Launch Daemons: ℹ️
 [loaded] com.adobe.fpsaud.plist [Click for support]
User Launch Agents: ℹ️
 [loaded] com.google.keystone.agent.plist [Click for support]
User Login Items: ℹ️
 Skype UNKNOWN (missing value)
 Safari Application (/Applications/Safari.app)
 Dropbox Application (/Applications/Dropbox.app)
 Android File Transfer Agent Application (/Users/[redacted]/Library/Application Support/Google/Android File Transfer/Android File Transfer Agent.app)
 ConnectService Application (/Library/Application Support/ArcSoft/Connect Service/ConnectService.app)
Internet Plug-ins: ℹ️
 Flip4Mac WMV Plugin: Version: 2.4.4.2 [Click for support]
 FlashPlayer-10.6: Version: 16.0.0.305 - SDK 10.6 [Click for support]
 QuickTime Plugin: Version: 7.7.3
 Flash Player: Version: 16.0.0.305 - SDK 10.6 [Click for support]
 Default Browser: Version: 600 - SDK 10.10
 Google Earth Web Plug-in: Version: 7.1 [Click for support]
 Silverlight: Version: 4.0.60129.0 [Click for support]
 iPhotoPhotocast: Version: 7.0
User internet Plug-ins: ℹ️
 CitrixOnlineWebDeploymentPlugin: Version: 1.0.105 [Click for support]
3rd Party Preference Panes: ℹ️
 Flash Player [Click for support]
 Flip4Mac WMV [Click for support]
Time Machine: ℹ️
 Skip System Files: NO
 Auto backup: YES
 Volumes being backed up:
 Macintosh HD: Disk size: 318.84 GB Disk used: 184.16 GB
 Destinations:
 Time Machine Backups [Local]
 Total size: 499.76 GB
 Total number of backups: 184
 Oldest backup: 2010-12-10 15:37:39 +0000
 Last backup: 2015-02-06 02:49:24 +0000
 Size of backup disk: Too small
 Backup size 499.76 GB < (Disk used 184.16 GB X 3)
Top Processes by CPU: ℹ️
 5% WindowServer
 1% ConnectService
 1% Skype
 0% systemstatsd
 0% launchd
Top Processes by Memory: ℹ️
 193 MB Skype
 168 MB mds_stores
 132 MB com.apple.WebKit.WebContent
 107 MB Mail
 99 MB ocspd
Virtual Memory Information: ℹ️
 889 MB Free RAM
 1.99 GB Active RAM
 455 MB Inactive RAM
 825 MB Wired RAM
 1.11 GB Page-ins
 0 B Page-outs
Diagnostics Information: ℹ️
 Feb 6, 2015, 08:27:32 AM /Library/Logs/DiagnosticReports/com.apple.AmbientDisplayAgent_2015-02-06-082732 _[redacted].crash
 Feb 6, 2015, 08:25:19 AM Self test - passed
 Feb 5, 2015, 04:37:08 PM /Users/[redacted]/Library/Logs/DiagnosticReports/com.apple.WebKit.WebContent_20 15-02-05-163708_[redacted].crash
 Feb 5, 2015, 10:01:02 AM /Users/[redacted]/Library/Logs/DiagnosticReports/com.apple.WebKit.WebContent_20 15-02-05-100102_[redacted].crash
 Feb 5, 2015, 12:03:59 AM /Library/Logs/DiagnosticReports/HP Scan_2015-02-05-000359_[redacted].cpu_resource.diag [Click for details]
 Feb 4, 2015, 11:58:58 PM /Library/Logs/DiagnosticReports/HP Scan_2015-02-04-235858_[redacted].cpu_resource.diag [Click for details]
 Feb 4, 2015, 11:54:35 PM /Library/Logs/DiagnosticReports/HP Scan_2015-02-04-235435_[redacted].cpu_resource.diag [Click for details]
 Feb 4, 2015, 11:49:03 PM /Library/Logs/DiagnosticReports/HP Scan_2015-02-04-234903_[redacted].cpu_resource.diag [Click for details]
 Feb 4, 2015, 09:40:16 PM /Users/[redacted]/Library/Logs/DiagnosticReports/com.apple.WebKit.WebContent_20 15-02-04-214016_[redacted].crash
 Feb 4, 2015, 09:38:12 PM /Users/[redacted]/Library/Logs/DiagnosticReports/com.apple.WebKit.WebContent_20 15-02-04-213812_[redacted].crash
 Feb 4, 2015, 09:27:56 PM /Users/[redacted]/Library/Logs/DiagnosticReports/com.apple.WebKit.WebContent_20 15-02-04-212756_[redacted].crash
 Feb 4, 2015, 09:25:25 PM /Users/[redacted]/Library/Logs/DiagnosticReports/com.apple.WebKit.WebContent_20 15-02-04-212525_[redacted].crash
 Feb 4, 2015, 09:20:16 PM /Users/[redacted]/Library/Logs/DiagnosticReports/com.apple.WebKit.WebContent_20 15-02-04-212016_[redacted].crash
 Feb 4, 2015, 09:18:10 PM /Users/[redacted]/Library/Logs/DiagnosticReports/com.apple.WebKit.WebContent_20 15-02-04-211810_[redacted].crash
 Feb 4, 2015, 09:12:54 PM /Users/[redacted]/Library/Logs/DiagnosticReports/com.apple.WebKit.WebContent_20 15-02-04-211254_[redacted].crash
 Feb 4, 2015, 08:40:48 PM /Users/[redacted]/Library/Logs/DiagnosticReports/com.apple.WebKit.WebContent_20 15-02-04-204048_[redacted].crash
 Feb 4, 2015, 08:22:04 PM /Users/[redacted]/Library/Logs/DiagnosticReports/com.apple.WebKit.WebContent_20 15-02-04-202204_[redacted].crash
 Feb 4, 2015, 12:11:35 AM /Users/[redacted]/Library/Logs/DiagnosticReports/com.apple.WebKit.WebContent_20 15-02-04-001135_[redacted].crash
 Feb 3, 2015, 09:44:33 PM /Users/[redacted]/Library/Logs/DiagnosticReports/com.apple.WebKit.WebContent_20 15-02-03-214433_[redacted].crash
 Feb 3, 2015, 05:40:21 PM /Library/Logs/DiagnosticReports/HP Scan_2015-02-03-174021_[redacted].cpu_resource.diag [Click for details]
 Feb 3, 2015, 09:05:45 AM /Users/[redacted]/Library/Logs/DiagnosticReports/com.apple.WebKit.WebContent_20 15-02-03-090545_[redacted].crash
 Jan 28, 2015, 06:10:42 PM /Library/Logs/DiagnosticReports/Kernel_2015-01-28-181042_[redacted].panic [Click for details]
 Jan 21, 2015, 10:51:25 PM /Library/Logs/DiagnosticReports/Kernel_2015-01-21-225125_[redacted].panic [Click for details]
 Jan 20, 2015, 11:12:47 AM /Library/Logs/DiagnosticReports/Kernel_2015-01-20-111247_[redacted].panic [Click for details]
 Jan 18, 2015, 09:57:31 AM /Library/Logs/DiagnosticReports/Kernel_2015-01-18-095731_[redacted].panic [Click for details]
The only observations are that the backup drive is deemed too small and the quite long list of diagnostic reports dated between Jan 18, 2015 (which I believe is the day I upgraded to Yosemite) & today the latest Yosemite update was installed on Jan 28, 2015
Any further assistance will be appreciated

Multiple instances of firefox running cannot kill in task manager "Access denied"

There's no issue with starting a new instance after closing one, the "firefox is already running" error is not occurring (ok maybe once or twice a month, but it's not related to this problem, as my problem happens all the time.)
Apparently when closing a ff window it never fully stops. My computer slows down because of it and these multiple instances of firefox show up in Task Manager. When I try to kill the extra processes it just goes "BANG" and the "access denied" error dialog box appears. They are all running under my user account, and in CPU some are just 10 or 25 and some are in the hundreds and some are over a million. what the heck is going on?
I'm running Windows 7 64 bit and ff 23.0 but this has been happening since about ff 15 (?)

When closing Firefox completely, it is important to close it using the Exit button, located inside of the Firefox/File menu.
Another cause to this problem could be a Firefox preloader. Do you have any programs that will load Firefox automatically? They are supposed to improve start time.
You can also '''try Firefox Safe Mode''' to see if the problem goes away. Safe Mode is a troubleshooting mode, which disables most add-ons.
''(If you're not using it, switch to the Default theme.)''
* Open the Help menu and click on the '''Restart with Add-ons Disabled...''' menu item while Firefox is running.
''Once you get the pop-up, just select "'Start in Safe Mode"''
'''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one. Please follow the [[Troubleshooting extensions and themes]] article for that.
''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
I hope that one of my solutions helps to fix your problem. Please report back with updates soon.
NOTE: You are using an outdated version of Firefox. This can cause security and functionality issue. Please update to the most recent version as soon as possible.

Having trouble running multiple instances of Firefox in XenDesktop 7.1

We recently upgraded our Citrix environment to XenDesktop 7.1. We published Firefox, but only one user at a time can have the program open. When we try to run multiple sessions, we get this error message "Firefox is already running, but is not responding. To open a new window, you must first close the existing Firefox process, or restart your system."
We've had it published in previous Citrix environments with no problems. How do we need to configure Firefox in XenDesktop so that multiple users can run the program at the same time? Thanks.

I do not understand virtualisation.
I can however say that ordinarily Firefox needs each user to have a separate profile and for Firefox to open simultaneous multiple instances with separate profiles the ''-no-remote'' argument needs to be used.
* http://kb.mozillazine.org/Using_multiple_profiles_-_Firefox
* http://kb.mozillazine.org/Opening_a_new_instance_of_your_Mozilla_application_with_another_profile

Multiple instances of explorer.exe running in task manager

I got a dropper trojan virus on my computer that microsoft security essencials do not recognized but after running "superantispyware" antivirus I got discover it and delete it. After that, I still could find the infected files in my
administrator folders as .temp files and I just erased them. After that my computer started crashing and runing several instances of explorer.exe in the task manager with different memory values, some of them ascending to 350,000. I have set up my computer
to run just the basic services, I have tried windows in safe mode, ran other antivirus programs but still it is performing the same. As far as I have noticed other unusual process present are host.dll, dllhost.exe, and logonUI.exe. Any idea about it? Thanks
in advance for your help.

I have the same issue. It started about a month ago when I was filling out a form online and had to quit and close the window. My system got very buggy (can't remember details), flashing, then really slow. Found a bunch of explorer.exe instances
in Task Manager. Ran Security Essentials and several other anti-viruses, nothing found.
Running Win7 Pro, sp1, 64-bit, CoreI5, 4Gb Ram
Restored system to a previous version, didn't work
Restored last system image, didn't work
Used System Repair Disk - ran Memory Diagnostic. Said it would give me report after reboot. Never saw a report after reboot. But only one instance of explorer.exe in task manager at that point. Took disk out, rebooted normally. After
20 minutes or so, the multiple instances were back.
Used Repair Disk again, ran Memory Diagnostic. Again, no report after reboot (leaving disk in machine both times), but only one instance running again.
Did this a few times with the same result, so now leaving disk in system and always boot from it.
Ran Security Essentials again, found that rovnix virus, removed, ran again, found it again.
Ran search for instances and found many. Here's an example:
C:\Windows\explorer.exe
C:\Windows\winsxs\wow64_microsoft-windows-explorer_31bf3856ad364e35_6.1.7601.17567_none_b9fc4815c4e292b5
C:\Windows\winsxs\amd64_microsoft-windows-explorer_31bf3856ad364e35_6.1.7601.21669_none_b0333b22a99da332
C:\Windows\winsxs\wow64_microsoft-windows-explorer_31bf3856ad364e35_6.1.7601.21669_none_ba87e574ddfe652d
C:\Windows\winsxs\amd64_microsoft-windows-explorer_31bf3856ad364e35_6.1.7601.17567_none_afa79dc39081d0ba
C:\Windows\SysWOW64
When I check properties on the now single one on Task Manager, this is what it shows:
C:\Windows\winsxs\amd64_microsoft-windows-explorer_31bf3856ad364e35_6.1.7601.17567_none_afa79dc39081d0ba\explorer.exe
C:\Windows\explorer.exe
I was going to reinstall entire system, but was from an Anytime Upgrade which now says it's invalid. Much more to story on that (calls to MS support, etc.).

Multiple instances of Internet Explorer in task manager using 100,000 KB+ memory

Hi! I recently got a virus on my computer that causes multiple instances of explorer.exe and iexplorer.exe to appear in my processes tab of task manager. Over the course of about a minute, the memory usage of each begins to climb rapidly until all of my
memory is being used by these. These do not appear in my applications, nor do they actually open up an internet explorer window. When I end task on them, another one appears about a minute later to take its place and do the same thing again. Additionally,
when I click shut down to turn my computer off, various advertisements flash on my screen for a few seconds before the computer begins to shut down. When the computer is started up, a window appears for a split second that contains only blackness. I have never
seen this window appear before the virus was obtained. When I end task on all my explorer.exe and iexplorer.exe applications at the same time, my desktop vanishes, but it also stops those applications from reappearing. This virus has caused my computer
to run unbearably slow. I have tried Spybot S&D, Exterminateit, AVG, Roadkill, and other methods and nothing seems to detect this or cure it. I am not that good with computers, but I am dying for help on the matter! If you can assist, please let me know
what I can do with detailed instructions for my sake! Thank you!!!!!!

See and follow Andy's excellent advices.
In addition...
See: "How to
Reset Internet Explorer settings".
If the issue persists...
1. Please download and run the
Microsoft Safety Scanner tool (freeware).
2. Reboot your PC.
3. Please download and update Malwarebytes Anti-Malware Free
4. Reboot Windows in
Safe Mode and run a Full Scan with Malwarebytes Anti-Malware.
5. Download and Run AdwCleaner (Freeware)
6. Reboot and Test.
Best of Luck,
Vincenzo Di Russo
Microsoft® MVP Windows Internet Explorer, Windows & Security Expert - since 2003.
Moderator in the Microsoft Community and TechNet Forums
My MVP Profile

Open multiple instances for a VI

Dear all,
I created an application to open multiple instances(RecipeEditor.vi as attached)works fine in debug mode. But, after I build it to an exe, it gives me error 1003.
Can you please show me some pointer what is wrong?
Please find attached zipped package
Thank you in advance.
Regards,
Vincent
Attachments:
New folder.zip ‏1742 KB

my apology, Norbert.
I attached the wrong file. This attachment is password removed.
Thank you in advance
Attachments:
Recipe Editor.vi ‏286 KB

Audigy NX Multiple Instances in Device Mana

Similar Messages

Maybe you are looking for